Joy-it RGB SHIELD User manual

RGB SHIELD
Expansion board for Arduino incl. 40 LEDs
1. GENERAL INFORMATION
Dear customer,
Thank you for purchasing our product. In the following, we will show you
which things should be noted during the use.
Should you encounter any unexpected problems, do not hesitate to
contact us.

2. CONNECTION
Plug the expansion board onto the Arduino so that all pins of the board
are connected to the Arduino. Further wiring is not necessary.
3. INSTALLATION OF THE LIBRARY
For the LED matrix we use the library Adafruit NeoPixel, which is
published by Adafruit under GNU Lesser General Public License.
You can include the library in your Arduino IDE. Under Sketch → Include
Library → Manage Libraries... , you can search for the library and install
it.
4. CODE EXAMPLE
You can download the code sample here.
Unzip the .zip file and open the .ino file with your Arduino IDE. Click on
Upload to run the program.

PR
5. OTHER INFORMATION
Our Information and Take-back Obligations according to the
Electrical and Electronic Equipment Act (ElektroG)
Symbol on Electrial and Electronic Products:
This crossed-out bin means that electrical and electronic pro-
ducts do not belong into the household waste. You must hand over your
old appliance to a registration place. Before you can hand over the old
appliance, you must remove used batteries and replacement batteries
which are not enclosed by the device.
Return Options:
As the end user, you can hand over your old appliance (which has
essentially the same functions as the new one bought with us) free of
charge for disposal with the purchase of a new device.
Small devices, which do not have outer dimensions bigger than 25 cm
can be handed in for disposal independently of the purchase of a new
product in normal household quantities.
1. Possibility of return at our company location during our opening
hours
Simac Electronics Handel GmbH, Pascalstr. 8, D-47506 Neukirchen-Vluyn
2. Possibility of return nearby
We will send you a parcel stamp with which you can send us your old
appliance free of charge. For this possibility, please contact us via e-mail
at [e-mail] or via telephone, then please dial 02845 93 60 -23
Information about Package:
Please package your old appliance safe for transport. Should you not
have suitable packaging material or you do not want to use your own
material, you can contact us and we will send you an appropriate
package.
6. SUPPORT
If any questions remained open or problems may arise aer your
purchase,we are available by e-mail, telephone and ticket support
system to answer these.
E-Mail: [e-mail]
Ticket-system: http://support.joy-it.net
Telephone: [phone] – 66 (10 - 17 o'clock)
For further information visit our website:
www.joy-it.net
Published: 08.04.2021
www.joy-it.net
SIMAC Electronics GmbH
Pascalstr. 8, 47506 Neukirchen-Vluyn