Juniper cedar CT8X2 User manual

USER’S MANUAL
29949-00_CT8X2_Manual.indd 129949-00_CT8X2_Manual.indd 1 12/17/20 2:14 PM12/17/20 2:14 PM

1. Power Button
2. Front-Facing
Camera
3. Ambient Light
Sensor
4. Microphone
5. Menu
6. Home
7. Back
8. USB Type-C
Connector
9. Volume Up
10. Volume Down
11. Programmable
Function Keys
LEFT SIDE
FRONT
TOP
BOTTOM
4
2
8
910
Installing the SD & SIM Cards
Product Key
3
65 7 1
UNLOCK LOCK
11
29949-00_CT8X2_Manual.indd 229949-00_CT8X2_Manual.indd 2 12/17/20 2:14 PM12/17/20 2:14 PM

12. Rear-Facing
Camera
13. Camera Flash
14. Hand Strap
Mount
15. Rear Speaker
16. Battery Door
Locks
17. Expansion
Pod
Attachment
18. External GNSS
Antenna
19. Battery Door
BACK
RIGHT SIDE
13
12
14
14
16
16
17
18
19
15
14
14
16
16
Nano-SIM 2Micro SD Nano-SIM 1
29949-00_CT8X2_Manual.indd 329949-00_CT8X2_Manual.indd 3 12/17/20 2:14 PM12/17/20 2:14 PM

FULL
BATTERY
NETWORK
CELL
NETWORK
WIFI
ADDING YOUR GOOGLE ACCOUNT
1. Tap Settings app.
2. Tap Users & Accounts and then tap
Add Account.
3. Tap Google on the Add an Account
screen.
4. Follow the instructions to setup your
Google Account.
ACCESSING APPLICATIONS
1. Press the Home button.
2. Swipe up from the bottom of the
Home screen.
3. The Apps screen shows all
applications installed on your device.
4. Press and drag the icon for any
application to create a shortcut on
the Home screen.
5. Tap Play Store to find and install new
applications.
ACCESSING WIDGETS
1. Press the Home button.
2. Press and hold a blank spot on the
Home screen.
3. Icons for Wallpapers, Widgets, and
Settings are shown at the bottom of
the screen.
4. Tap Widgets.
5. Press and hold the icon for any
widget to install it on the Home
screen.
INDICATORS
CONNECT TO Wi-Fi (WIRELESS LAN)
1. Swipe down from the top of the
screen.
2. Press and hold the Wi-Fi icon.
3. Tap OFF on the Wi-Fi line to turn Wi-
Fi on. The Wi-Fi indicator will appear
at the top of the screen and Wi-Fi will
show ON.
4. Tap on the network you want to
access.
CAUTION: For best performance
only use the supplied USB Charger and
Cable. DO NOT USE THE USB PORT IF
IT IS WET. Make sure to dry out the port
completely before connecting to power.
Failure to do so will void the warranty.
INSTALLING A SIM CARD OR SD CARD
1. With the unit powered on, press
and hold the power button until the
Power Off option
appears on the screen.
2. Tap Power Off. Allow the device to
power off.
3. Unlock and remove the battery door
to access the SIM by sliding the 4
locking spots to the symbol
unlock slots.
4. Remove battery by sliding the
battery lock to the left.
5. Orient the SIM card so the contacts
are facing away from you.
6. Gently push the SIM card into the slot.
The right SIM slot is the primary SIM.
CAUTION: Do not force the card into
the slot as it may damage the device. If
the card does not install properly, check
the orientation and try again.
7. To remove the SIM card, gently press
in the card and release. It is spring
loaded.
8. The microSD card slot is located on
the left side of the compartment and
can be inserted by
orienting the card with connectors
down and away from you.
NOTE: The CT8X2 only accepts
microSD cards.
29949-00_CT8X2_Manual.indd 429949-00_CT8X2_Manual.indd 4 12/17/20 2:14 PM12/17/20 2:14 PM

9. Carefully replace the battery and
slide the lock to the right to secure
the battery.
10. Carefully replace the battery door
and lock the battery door latches.
WARNING: The battery door must
be properly seated and secured before
exposing the unit to water. Failure to
perform this step could lead to water
damage of the unit.
SUPPORT
Web: http://www.junipersys.com
Email: [e-mail]
Phone: [phone]
REGULATORY INFORMATION
This equipment has been tested and
found to comply with the limits for
a Class B digital device, pursuant to
part 15 of the FCC Rules. Operation
is subject to the following two
conditions: (1) This device may not
cause harmful interference, and (2) this
device must accept any interference
received, including interference that
may cause undesired operation.
These limits are designed to provide
reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses, and
can radiate radio frequency energy
and, if not installed and used in
accordance with the instructions, may
cause harmful interference to radio
communications. However, there is
no guarantee that interference will
not occur in a particular installation. If
this equipment does cause harmful
interference to radio or television
reception, which can be determined
by turning the equipment off and on,
the user is encouraged to try to correct
the interference by one or more of the
following measures:
• Reorient or relocate the receiving
antenna.
• Increase the separation between the
equipment and receiver.
• Connect the equipment to an outlet
on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced
radio/TV technician for help.
IMPORTANT: Changes or
modifications to this product not
authorized by the manufacturer could
void the radio frequency compatibility
and wireless compliance and negate your
authority to operate the product. The
use of noncompliant peripheral devices
could cause the emission of radiation not
within the limits set by part 15 of the FCC
rules. Only use peripheral devices tested
to provide electromagnetic compatibility
when connected to this unit.
EXPOSURE TO RADIO FREQUENCY
(RF) SIGNALS
Your device contains a radio transmitter
and receiver. The radiated output power
is far below the international radio
frequency exposure limits. These limits
are part of comprehensive guidelines
and establish permitted levels of RF
energy for the general population.
The guidelines are based on the safety
standards previously set by international
standards bodies:
• American National Standards
Institute (ANSI) IEEE. C95.1-1992.
• National Council on Radiation
Protection and Measurement
(NCRP). Report 86. 1986.
• International Commission on
Non-Ionizing Radiation Protection
(ICNIRP) 1996.
• Ministry of Health (Canada),
Safety Code 6.
29949-00_CT8X2_Manual.indd 529949-00_CT8X2_Manual.indd 5 12/17/20 2:14 PM12/17/20 2:14 PM

The standards include a substantial
safety margin designed to assure the
safety of all persons, regardless of age
and health. The exposure standard for
wireless mobile phones employs a unit
of measurement known as the Specific
Absorption Rate, or SAR. The standard
incorporates a substantial margin of
safety to give additional protection
for the public and to account for any
variations in usage. As with other mobile
radio transmitting equipment, users are
advised that for satisfactory operation
of the equipment and for the safety of
personnel, it is recommended that no
part of the human body be allowed to
come too close to the antenna during
operation of the equipment.
Your device has an internal antenna. Use
only the supplied integral antenna. Use
of unauthorized or modified antennas
may impair call quality and damage
the phone, causing loss of performance
and SAR levels exceeding the
recommended limits as well as result in
non-compliance with local regulatory
requirements in your country.
To assure optimal phone performance
and ensure human exposure to RF
energy is within the guidelines set
forth in the relevant standards; always
use your device only in its normal-use
position. Do not touch or hold the
antenna area unnecessarily when
placing or receiving a phone call.
Contact with the antenna area may
impair call quality and cause your device
to operate at a higher power level than
needed. Avoiding contact with the
antenna area when the phone is IN USE
optimizes the antenna performance
and the battery life.
CEDAR 1YEAR WARRANTY
Juniper Systems, Inc. (“Juniper”) warrants
that the Cedar brand products shall
be free from defects in materials and
workmanship, under normal intended
use, for a period of ONE YEAR from date
of purchase, excepting that this warranty
shall not apply to battery packs, media
containing software, or any accessories.
Juniper warrants the following shall
be free from defects in materials and
workmanship, under normal intended
use, for a period of ninety (90) days from
the date of shipment: battery packs,
media containing the handheld and
desktop PC programs and owner’s
manual, and any accessories.
WARRANTY EXCLUSIONS
This warranty shall not apply if: (I) the
product has been set up improperly
or has been improperly installed or
calibrated, (II) the product is operated
in a manner that is not in accordance
with the instruction manual(s) and/or
user guide, (III) the product is used for
a purpose other than for which it was
designed, (IV) the product has been used
in environmental conditions outside
of those specified for the product, (V)
the product has been subject to any
modification, alteration, or change by or
on behalf of customer (except and unless
modified, changed or altered by Juniper
or under Juniper’s direct supervision), (VI)
the defect or malfunction results from
misuse or accident, (VII) the unique device
identification number on the product
has been tampered with or removed, or
(VIII) the product has been opened or
tampered with in any way. Parts that are
excessively worn are not covered under
warranty. These may include, but are
not limited to, the keyboard elastomer
and switch matrix, hand straps, and the
touchscreen (if applicable).
29949-00_CT8X2_Manual.indd 629949-00_CT8X2_Manual.indd 6 12/17/20 2:14 PM12/17/20 2:14 PM

This warranty is exclusive and Juniper
will not assume and hereby expressly
disclaims any further warranties,
whether expressed or implied, including,
without limitation, any warranties as to
merchantability, fitness for a particular
purpose, noninfringement or any
warranties arising from the course of
performance, dealing, or usage of trade.
Juniper specifically makes no warranties
as to the suitability of its products for any
particular application. Juniper makes
no warranties that its products will
meet your requirements or will work
in combination with any hardware or
applications software products provided
by third parties, that the operation of its
products will be uninterrupted or error
free, or that all defects in the product
will be corrected. Juniper shall not be
responsible for software, firmware,
information, or memory data contained
in, stored on, or integrated with any
products returned to Juniper for repair,
under warranty or not.
REMEDY
In the event a defect in materials or
workmanship is discovered and reported
to Juniper within the specified warranty
period, after evaluation by a technician
at a certified repair center, Juniper will, at
its discretion, repair the defect or replace
the defective product. Replacement
products may be new or reconditioned.
Juniper warrants any replaced or repaired
product or a period of ninety (90) days
from the date of return shipment, or
through the end of the original warranty
period, whichever is longer.
Limitation of Liability: To the fullest
extent allowed by law, Juniper’s
obligation shall be limited to the repair
or replacement of the product. Juniper
shall in no event be liable for special,
incidental, consequential, indirect,
special, or punitive damages of any kind,
or for loss of revenue or profits, loss of
business, loss of information or data, or
other financial loss arising out of or in
connection with the sale, installation,
maintenance, use performance, failure,
or interruption of any product. Any
responsibility and/or liability of Juniper
shall, in connection with a warranted
product, be limited in maximum
amount to the original purchase price.
Warranty Service: In order to obtain a
warranty product repair, replacement,
or other servicing, contact our customer
service department or fill out the Repair
Order Form within the applicable
warranty period. The customer must
prepay all shipping costs for delivery of
the product to the repair center. Please
visit our Repair Policies webpage for
further details.
Governing Law: This warranty will be
governed by the laws of Utah, and
excluding the United Nations Convention
on Contracts for the International Sale
of Goods. The courts of Utah shall
have exclusive personal jurisdiction in
case of any disputes arising out of or in
connection with this warranty.
Warranty Service and Materials include
these items: analysis of problem by
service personnel, labor and materials
required to fix defective parts or replace
the unit entirely; functional analysis
performed after repair; repair turn-
around within 5 to 10 working days of
receipt unless special circumstances
exist; shipping costs to return unit to the
customer.
WARR-STD-HW
29949-00_CT8X2_Manual.indd 729949-00_CT8X2_Manual.indd 7 12/17/20 2:14 PM12/17/20 2:14 PM

Juniper Systems, Inc.
1132 West 1700 North
Logan, UT 84321
435.753.1881
junipersys.com
Juniper Systems, EMEA.
4 The Courtyard
Bromsgrove, B60 3DJ, UK
[phone]
junipersys.com
© 2021 Juniper Systems, Inc. All rights reserved. Juniper Systems, Cedar, and CT8X2
are trademarks and/or registered trademarks of Juniper Systems, Inc.
Google, Android, Google Play, YouTube and other marks are trademarks of Google LLC
The Android robot is reproduced or modified from work created and shared by Google and
used according to terms described in the Creative Commons 3.0 Attribution License.
JSPN 29949
Qualcomm®Snapdragon™
SDM632 Octa-core
4 GB RAM / 64GB ROM
Front 8 MP, Rear 13 MP
GPS/GLONASS/BDS/
Galileo
8000 mAh Removable
Battery
IP67 Certified Dust/
Water Proof
8.0" 1280x800 WXGA
Screen
OS: Android™10
29949-00_CT8X2_Manual.indd 829949-00_CT8X2_Manual.indd 8 12/17/20 2:14 PM12/17/20 2:14 PM