Jura IMPRESSA A9 One Touch User manual

pt
es
pt
es
fr
ru
en
de
Instructions for use for IMPRESSA A9 One Touch
KFor your safety: read and understand manual before use.
E

2
Table of contents
Your IMPRESSA A9 One Touch
IMPORTANT SAFEGUARDS 4
Control elements 8
1 Preparing and using for the first time 10
JURA on the Internet ............................................................................................................................................. 10
Touchscreen display .............................................................................................................................................. 10
Setting up the machine........................................................................................................................................ 10
Filling the bean container .................................................................................................................................... 10
First-time use........................................................................................................................................................... 11
First-time use with filter cartridge activation .................................................................................................... 11
First-time use without filter cartridge activation..............................................................................................12
Determining the water hardness.........................................................................................................................12
Connecting milk......................................................................................................................................................13
Filling the water tank ............................................................................................................................................ 14
2 Preparation 14
Ways of preparing a beverage..............................................................................................................................15
Ristretto, espresso and coffee ..............................................................................................................................15
2 ristretti, 2 espressi and 2 coffees.......................................................................................................................15
Latte macchiato and Cappuccino....................................................................................................................... 16
Latte macchiato doppio and Cappuccino doppio ........................................................................................... 16
Permanently setting the amount of water for the cup size........................................................................... 16
Ground coffee......................................................................................................................................................... 16
Adjusting the grinder.............................................................................................................................................17
Hot water................................................................................................................................................................. 18
3 Daily operation 18
Switching on the machine ................................................................................................................................... 18
Daily maintenance................................................................................................................................................. 18
Regular maintenance............................................................................................................................................ 19
Switching off the machine................................................................................................................................... 19
4 Permanent settings in programming mode 19
Replacing products on the start screen............................................................................................................. 19
Deactivating the start screen .............................................................................................................................. 19
Setting the water hardness................................................................................................................................. 20
Automatic switch-off............................................................................................................................................ 20
Unit for amount of water .................................................................................................................................... 20
Language................................................................................................................................................................. 21
5 Maintenance 21
Rinsing the machine .............................................................................................................................................22
Rinsing the milk system .......................................................................................................................................22
Cleaning the milk system.....................................................................................................................................22
Dismantling and rinsing the dual spout............................................................................................................23
Inserting and activating the filter .......................................................................................................................24

3
pt
es
pt
es
fr
ru
en
de
Table of contents
Changing the filter.................................................................................................................................................25
Cleaning the machine...........................................................................................................................................26
Descaling the machine ........................................................................................................................................27
Cleaning the bean container ...............................................................................................................................28
Descaling the water tank......................................................................................................................................28
6 Display messages 29
7 Troubleshooting 30
8 Transport and environmentally friendly disposal 31
Transport/ Emptying the system ........................................................................................................................31
Disposal ....................................................................................................................................................................31
9 Technical data 31
10 Index 32
11 JURA contact details/ Legal information 36
Symbol description
Warnings
This is the safety alert symbol. lt is used to alert you to potential personal injury
hazards. Obey all safety messages that follow this symbol to avoid possible injury or
death.
DANGER indicates a hazardous situation which, if not avoided, will result in death or
serious injury.
WARNING indicates a hazardous situation which, if not avoided, could result in death
or serious injury.
J CAUTION CAUTION, used with the safety alert symbol, indicates a hazardous situation which, if
not avoided, could result in minor or moderate injury.
NOTICE NOTICE is used to address practices not related to personal injury.
Symbols used
TPrompt to take action. This symbol means that you are being prompted to perform
some action.
EInformation and tips to make it even easier to use your IMPRESSA.
‘Coffee’ Display message
J
J DANGER
J WARNING

4
IMPORTANT SAFEGUARDS
IMPORTANT SAFEGUARDS
SAVE THESE INSTRUCTIONS.
Pass them on to any subsequent user.
When using electrical appliances, basic safety precautions shall always
be followed, to reduce the risk of fire, electric shock, and/or injury to
persons, including the following:
ZRead all instructions.
ZDo not touch hot surfaces. Use handles or knobs.
ZTo protect against fire, electric shock and injury to persons, do not
immerse power cord, plugs, or body of machine in water or other
liquid.
ZClose supervision is necessary when any appliance is used by or
near children.
ZUnplug from outlet when not in use and before cleaning. Allow to
cool before putting on or taking off parts, and before cleaning the
appliance.
ZDo not operate any appliance with a damaged cord or plug or
after the appliance malfunctions, or has been damaged in any
manner. Return appliance to the nearest authorized service
facility for examination, repair or adjustment.
ZThe use of an accessory attachment not recommended by the
appliance manufacturer may result in fire, electric shock, or injury
to persons.
ZDo not use outdoors.
ZDo not let the cord hang over the edge of a table or counter, or
touch hot surfaces.
ZDo not place on or near a hot gas or electric burner, or in a heated
oven.
ZTo disconnect, turn any control to ‘OFF’ then remove plug from
wall outlet.
ZDo not use appliance for other than intended use.
ZUse extreme caution when dispensing hot steam, hot water or
hot coffee.
ZFor household use only.
Follow the basic safety
precautions

5
IMPORTANT SAFEGUARDS
pt
es
pt
es
fr
ru
en
de
The appliance is designed and intended for household use only. It shall
only be used for coffee preparation, according to these instructions. Use
for any other purpose will be deemed improper. JURA Elektroapparate
AG cannot accept any responsibility for the consequences of improper
use.
People, including children, who
Zdo not have the physical, sensory or mental capabilities to use the
appliance safely or
Zare inexperienced or lack knowledge in how to use the appliance
safely
must be supervised by a responsible person when using it, or must be
instructed in how to use it correctly.
ZThe power cord is provided to reduce the risk resulting from
becoming entangled in or tripping over a long cord.
ZThe cord shall be arranged so that it will not drape over the
counter top or table top where it can be pulled on by children or
tripped over.
ZThis appliance has a 3-pin grounded plug.
ZDo not modify the plug in any way.
Do NOT use extension cords.
If the user chooses to use an extension cord,
Zthe marked electrical rating of the extension cord shall be at least
as great as the electrical rating of the appliance, and
Zif the appliance is of the grounded type, the extension cord shall
be a grounding type 3-wire cord, and
Zthe longer cord shall be arranged so that it will not drape over the
counter top or tabletop where it can be pulled on by children or
tripped over.
To reduce the risk of fire or electric shock, DO NOT remove any service
covers. DO NOT modify the appliance in any way that is not described
in these instructions. NO user serviceable parts included. Repair MUST
be done by authorized personnel only.
In the event of signs of damage, for example if there is a smell of
burning, unplug the machine immediately from outlet and contact
JURA customer service.
Intended use
Special power cord set
instructions
J WARNING

6
IMPORTANT SAFEGUARDS
This appliance is for household use. Any servicing other than cleaning
and user maintenance shall be performed by an authorized service
representative:
ZDo not immerse base in water or try to disassemble.
ZDo not put the appliance or any individual parts in the dishwasher.
ZCheck voltage to be sure that the voltage indicated on the name
plate complies with your voltage. The name plate is located on
the underside of the appliance.
ZNever use warm or hot water to fill the water container. Use cold
water only.
ZKeep your hands and the cord away from hot parts of the
appliance during operation.
ZNever clean with scouring powders or hard implements.
ZEnsure that the ventilation slots are not covered.
ZNever pull out the drip tray during the brewing process. Only pull
the drip tray when the display instructs you or when the appliance
is ready for use.
ZNever fill instant coffee, chocolate mix etc. into the bean container
or ground coffee funnel (filler funnel for ground coffee). It will
damage the functioning of the brewing chamber.
ZNever fill sugar coated coffee beans into the bean container. In
case of doubt, call your dealer.
ZNever fill anything other than coffee beans into the bean
container (no chocolate, no rice, no nuts, no spices, nothing other
than roasted coffee beans).
ZNever fill frozen beans into the bean container. If you store beans
in the freezer, let them thaw 3 to 4 hours before filling them into
the bean container.
ZNever fill anything but fresh, cold and clean water into the water
tank, except when decalcifying.
ZNever use mineral or carbonated water. You can use tap water,
bottled water, spring water and reverse osmosis water.
ZNever do anything with the machine which is not described in
these instructions. In case of doubt, call your dealer.
JCAUTION
NOTICE
NEVER DO
(or you will void your
warranty protection):

7
IMPORTANT SAFEGUARDS
pt
es
pt
es
fr
ru
en
de
– intentionally blank –

8
Control elements
Control elements
2
3
5
4
6
7
1
9
8
J HOT
J HOT
1 Water tank
2 Power cord (back of the machine)
3 Milk pipe
4 Coffee grounds container
5 Drip tray
6 Bean container with aroma preservation cover
7 Hot-water spout
8 Height-adjustable dual spout
9 Cup platform

9
Control elements
pt
es
pt
es
fr
ru
en
de
5
1
26
7
4
3
1 Cover for powder chute for ground coffee
2 Powder chute for ground coffee (removable)
3 Touchscreen display
4 tMenu symbol
5 Cover cap for grinder adjustment switch
6 Grinder adjustment switch
7 QOn/Off button

10
1 Preparing and using for the first time
1 Preparing and using for the
first time
JURA on the Internet
Visit us on the Internet. You can download short
operating instructions for your machine from the
JURA website (www.jura.com). You will also find
interesting and up-to-date information on your
IMPRESSA and on every aspect of coffee.
Touchscreen display
Your IMPRESSA features an intuitive touchscreen
display. There are two ways of operating the
touchscreen display:
UTouch
Touch the display with your finger, for example
to start coffee preparation or undertake
various settings in programming mode.
USlide
Move your finger from left to right (or vice
versa) across the touchscreen display to select
a specialty coffee in the product selector view.
c
c
Espresso
Espresso
Setting up the machine
When setting up your IMPRESSA, please note the
following:
UPlace the IMPRESSA on a horizontal surface
that is not sensitive to water.
UChoose a spot for your IMPRESSA which
protects the machine against overheating.
Ensure that the ventilation slots are not
covered.
Filling the bean container
The bean container has an aroma preservation
cover. This will ensure that your coffee beans retain
their aroma for longer.
NOTICE
Coffee beans which have been treated with
additives (e.g. sugar), ground coffee or freeze-dried
coffee will damage the grinder.
T Only use untreated roasted coffee beans to
refill the bean container.
TRemove the aroma preservation cover.
TRemove any dirt or foreign objects from
inside the bean container.
TFill the bean container with coffee beans and
close the aroma preservation cover.

11
1 Preparing and using for the first time
pt
es
pt
es
fr
ru
en
de
First-time use
When using the machine for the first time, you can
choose whether you want to operate IMPRESSA
with or without the CLEARYL Blue filter cartridge.
If the water hardness is 10°dH or more, we
recommend using the filter cartridge. If you do not
know the hardness of your water, you can find this
out first (see Chapter 1 ‘Preparing and using for the
first time – Determining the water hardness’).
J WARNING
If the machine is operated with a defective power
cord, there is a danger of potentially fatal electric
shock.
T Never use a machine which is damaged.
T Never use a machine which has a defective
power cord.
EThe water volume is given as standard in ‘oz’.
You can change this setting to ‘ml’ in
programming mode (see Chapter 4 ‘Perma-
nent settings in programming mode – Unit
for amount of water’).
Precondition:The bean container has been filled.
TInsert the power plug into a power socket.
TPress the On/Off button Qto switch the
IMPRESSA on.
The display shows the languages you can
choose from.
ETo display more languages, touch ‘>’
(bottom right).
TTouch the language you want, e.g. ‘English’.
‘Saved’ appears briefly on the display to
confirm the setting.
‘Use filter’, the box ‘Inactive’ lights up green.
ENow decide whether you want to operate
your IMPRESSA with or without a CLEARYL
Blue filter cartridge.
First-time use with filter cartridge
activation
NOTICE
Milk, sparkling mineral water or other liquids can
damage the water tank or the machine.
T Only fill the water tank with fresh, cold water.
TTouch ‘Active’.
TTouch ‘Save’.
‘Saved’ appears briefly on the display.
‘Insert filter’
TRemove the water tank.
TOpen the filter holder and insert the filter
cartridge into the water tank, exerting slight
pressure.
TClose the filter holder. It will click into place
audibly.
EAfter three months, the filter will cease to
work. Set the date on the date plate on the
filter holder in the water tank.
TFill the water tank with fresh, cold water and
reinsert the tank.
TPlace a receptacle (at least 10 oz or 300 ml)
under the hot-water spout and the dual
spout.
9

12
1 Preparing and using for the first time
TTouch ‘Next’.
‘Filter is being rinsed’, water flows out of the
hot-water spout.
EThe water may be slightly discolored. This is
not harmful to health and does not affect
the taste.
Rinsing of the filter stops automatically after
approximately 10 oz (300 ml).
‘Welcome to JURA’
‘System is filling’, the system fills up with
water. Water flows out of the hot-water
spout and the dual spout. The operation
stops automatically.
‘Machine is heating’
‘Machine is rinsing’, the machine rinses. The
operation stops automatically. Your
IMPRESSA is ready for use.
EThe display shows the products you can
prepare.
First-time use without filter cartridge
activation
NOTICE
Milk, sparkling mineral water or other liquids can
damage the water tank or the machine.
T Only fill the water tank with fresh, cold water.
TTouch ‘Save’.
‘Saved’ appears briefly on the display.
‘Water hardness’
EIf you do not know the hardness of your
water, you must find this out first (see
Chapter 1 ‘Preparing and using for the first
time – Determining the water hardness’).
TTouch ‘<’ or ‘>’ to adjust the water
hardness.
TTouch ‘Save’.
‘Saved’ appears briefly on the display.
‘Fill water tank’
TRemove the water tank and rinse it with cold
water.
TFill the water tank with fresh, cold water and
reinsert the tank.
‘Welcome to JURA’
‘System is filling’, the system fills up with
water. Water flows out of the hot-water
spout and the dual spout. The operation
stops automatically.
‘Machine is rinsing’, the machine rinses.
The operation stops automatically. Your
IMPRESSA is ready for use.
EThe display shows the products you can
prepare.
Determining the water hardness
You can find out what the water hardness is by
using the Aquadur® test strip supplied as standard.
THold the test strip briefly (for 1 second)
under flowing water. Shake off the water.
TWait for about one minute.
TYou will then be able to read the degree of
water hardness from the discoloration of the
Aquadur® test strip and the description on
the packaging.

13
1 Preparing and using for the first time
pt
es
pt
es
fr
ru
en
de
The water hardness can be adjusted on a continu-
ous scale between 1 °dH and 30 °dH.
Level Display
German
Degree (°dH)
Degrees of
general hardness
(°dGH)
Parts per
million (ppm)
Indicator Strip number
of ‘reddish’ fields
Not active – – – –
Very soft water <3 <3 < 53.4 None
Soft water > 4 > 4 > 71 1
Hard water > 8.4 > 8.4 > 150 2
Very hard water > 14 > 14 > 250 3
Connecting milk
Your IMPRESSA creates fine, creamy, feather-light
milk foam with a perfect consistency. The most
important requirement for frothing milk is a milk
temperature of 39–46 °F (4–8 °C). We would
therefore recommend using a milk cooler or a
vacuum milk container.
TRemove the protective cover from the dual
spout.
TConnect the milk pipe to the dual spout.
TConnect the other end of the milk pipe to a
milk container or immerse it in a milk
carton.
9
9

14
2 Preparation
Filling the water tank
Daily maintenance of the machine and hygiene
when handling milk, coffee and water are key to a
perfect coffee result in the cup every time. You
should therefore change the water daily.
NOTICE
Milk, sparkling mineral water or other liquids can
damage the water tank or the machine.
T Only fill the water tank with fresh, cold water.
TRemove the water tank and rinse it with cold
water.
TFill the water tank with fresh, cold water and
reinsert the tank.
2 Preparation
J WARNING
Hot Coffee can cause scalding. Scalding is a serious
burn.
T Use extreme care when handling hot liquid.
T Allow liquid to cool down before drinking.
T In the event of scalding, rinse affected area
with cold water and seek medical attention.
T Keep children AWAY.
EYou can stop preparation of a specialty
coffee, specialty coffee with milk or hot
water at any time. To do this, touch ‘Cancel’.
EAfter a specialty coffee is selected and
during grinding, the coffee strength is
briefly displayed. You can change the
coffee strength by touching the display
(‘<’ or ‘>’). The next time you prepare
this product, this coffee strength setting
will be used.
EDuring preparation you can change the
amount of water by touching ‘<’ or ‘>’.
This setting is not saved.
EYou can follow the current status of
preparation on the display.
EThe water volume is given as standard in ‘oz’.
You can change this setting to ‘ml’ in
programming mode (see Chapter 4 ‘Perma-
nent settings in programming mode – Unit
for amount of water’).
Coffee tastes best served hot. A cold porcelain cup
cools the beverage – and impairs the taste. We
therefore recommend prewarming the cups. The
full coffee aroma can develop only in prewarmed
cups. You can purchase a JURA cup warmer from
your specialized dealer.

15
2 Preparation
pt
es
pt
es
fr
ru
en
de
Ways of preparing a beverage
The IMPRESSA offers various ways of preparing a
specialty coffee, milk foam or hot water:
UPreparation using the start screen: Simply
touch the desired product on the display (start
screen).
The following products are displayed as
standard on the start screen:
U‘Cappuccino’
U‘Latte macchiato’
U‘Espresso’
U‘Coffee’
UPreparation using the product selector view:
Only some of the products you can prepare
are shown on the start screen. As soon as you
touch the ‘^’ box (bottom left), more
products are displayed in a product selector
view.
Move your finger from left to right (or vice
versa) across the touchscreen display until
the desired product is displayed. Then touch
‘Prepare’ to start preparation.
The following additional products are shown
in the product selector view:
U‘Ristretto’
U‘2 ristretti’
U‘2 espressi’
U‘2 coffees’
U‘Hot water’
U‘Milk foam’
U‘Latte macchiato doppio’
U‘Cappuccino doppio’
EThe product selector view disappears
automatically after 10seconds if no
preparation is started.
EYou have the option of replacing the four
products on the start screen with your
personal favourites (see Chapter 4 ‘Perma-
nent settings in programming mode –
Replacing products on the start screen’).
Please note that the descriptions provided in
the following sections always refer to the
default settings.
Ristretto, espresso and coffee
Example:Proceed as follows to prepare one coffee.
Precondition:The start screen is displayed.
TPlace a cup under the coffee spout.
TTouch ‘Coffee’.
Preparation starts. The preset amount of
water for coffee flows into the cup.
Preparation stops automatically. Your
IMPRESSA is once more ready for use.
2 ristretti, 2 espressi and 2 coffees
There are several ways of preparing two specialty
coffees.
UWhen preparing a single product:
UAs soon as you start preparing a single
product, ‘2x’ is displayed in the bottom right
of the display. Touch ‘2x’ to prepare the
double product.
UUsing the product selector view:
UIn the product selector view, move your
finger from left to right (or vice versa) across
the touchscreen display until the required
double product ‘2 ristretti’, ‘2 espressi’ or
‘2 coffees’ is displayed. Then touch ‘Prepare’.
Example:Proceed as follows to prepare two
coffees (using product selector view).
Precondition:The start screen is displayed.
TPlace two cups under the coffee spout.
TTouch the ‘^’ box (bottom left).
TMove your finger from left to right (or vice
versa) across the touchscreen display until
‘2 coffees’ is displayed.
TTouch ‘Prepare’.
Coffee preparation starts.
EPlease note that when two specialty coffees
are prepared, the second is prepared
immediately after the first.
The preset amount of water for coffee flows
into the cups. Preparation stops automati-
cally. Your IMPRESSA is once more ready for
use.

16
2 Preparation
Latte macchiato and Cappuccino
Your IMPRESSA can prepare a latte macchiato or
cappuccino at the touch of a button. There is no
need to move the glass or cup.
Example:Proceed as follows to prepare one latte
macchiato.
Precondition:The start screen is displayed. Milk is
connected to the dual spout.
TPlace a glass under the dual spout.
TTouch ‘Latte macchiato’.
‘Latte macchiato’, the milk foam is prepared.
Preparation stops automatically when the
preset amount of milk is reached.
EThere is a short interval while the hot milk
separates from the milk foam. This allows
the typical layers of a latte macchiato to
form.
Coffee preparation starts. The preset
amount of water flows into the glass.
Preparation stops automatically. Your
IMPRESSA is once more ready for use.
To make sure the dual spout always works
properly, you must rinse and clean it regularly
(see Chapter 5 ‘Maintenance – Cleaning the milk
system’).
Latte macchiato doppio and Cappuccino
doppio
‘Doppio’ is Italian for ‘double’. When you prepare
a latte macchiato doppio or a cappuccino doppio,
two espressi are dispensed one after the other
directly into the hot milk foam. The result is an
extra full-bodied and aromatic specialty coffee.
The amount of water and milk foam used for a
latte macchiato doppio and cappuccino doppio
cannot be changed. The amount of milk foam
is the same as for a ‘standard’ latte macchiato or
cappuccino. The two espressi are prepared with
half the amount of water programmed for latte
macchiato and cappuccino.
Permanently setting the amount of water
for the cup size
It is easy to permanently adjust the amount of
water for all single products and hot water
according to the cup size. Adjust the amount once
as shown in the following example. Every time you
prepare a drink in the future, this amount will be
dispensed.
The permanent settings for adapting the amount
of water to the cup size for all specialty coffees and
hot water follow this model.
Example:Proceed as follows to permanently set
the amount of water for one coffee.
Precondition:The start screen is displayed.
TPlace a cup under the coffee spout.
TTouch the ‘Coffee’ box for about 2 seconds
until ‘Enough coffee?’ appears.
Preparation starts and the coffee flows into
the cup.
TTouch ‘Save’ as soon as there is sufficient
coffee in the cup.
Preparation stops. ‘Saved’ appears briefly on
the display. The set amount of water for one
coffee is permanently stored. Your IMPRESSA
is once more ready for use.
EYou can alter this setting at any time by
repeating the above procedure.
EThe amount can be permanently adjusted to
the cup size for the products shown in the
product selector view too. Move your finger
across the display until the desired product
is displayed. Then touch ‘Prepare’ for about
2 seconds until ‘Enough coffee?’ appears.
Ground coffee
You can choose to use a second coffee variety, for
example decaffeinated coffee, with the filter funnel
for ground coffee.
ENever add more than one level measuring
spoon of ground coffee.

17
2 Preparation
pt
es
pt
es
fr
ru
en
de
EIt is not possible to prepare two ristretti, two
espressi or two coffees with ground coffee.
EUse ground coffee which is not ground too
finely. Very fine coffee can block up the
system so that the coffee only comes out in
drips.
EIf you did not fill the machine with a
sufficient amount of ground coffee, ‘Not
enough ground coffee’ is displayed and the
IMPRESSA stops the operation.
EThe desired specialty coffee must be
prepared within approximately one minute
after filling with the ground coffee.
Otherwise the IMPRESSA stops the operation
and is once more ready for use.
Example:Proceed as follows to prepare one
espresso using ground coffee.
TPlace an espresso cup under the coffee
spout.
TOpen the powder chute cover.
‘Please add ground coffee’
TFit the filler funnel for ground coffee on the
powder chute.
TPlace one level measuring spoon of ground
coffee into the filler funnel.
TClose the cover of the powder chute.
The start screen is displayed.
TTouch ‘Espresso’.
Preparation starts. The preset amount of
water for espresso flows into the cup.
Preparation stops automatically. Your
IMPRESSA is once more ready for use.
Adjusting the grinder
You can adjust the grinder on a continuous scale to
suit the degree of roast of your coffee.
NOTICE
If you adjust the consistency of grind when the
grinder is not operating, the grinder adjustment
switch could be damaged.
T Only adjust the consistency of grind when
the grinder is running.
The consistency of grind is correct if the coffee
flows regularly from the coffee spout. In addition a
fine, thick crema forms.
Example:Proceed as follows to change the
consistency of grind during the preparation of an
espresso.
TPlace a cup under the coffee spout.
TOpen the cover of the grinder adjustment
switch.
TTouch ‘Espresso’.
The coffee strength is briefly displayed.
The grinder starts up.
TTurn the grinder adjustment switch to the
desired position while the grinder is
running.
The espresso is prepared and the consist-
ency of grind is adjusted.
TClose the cover of the grinder adjustment
switch.
EPlease note that the new consistency of
grind only takes effect when the second
beverage is prepared.

18
3 Daily operation
Hot water
J CAUTION
There is a danger of scalding from hot water
splashes.
T Avoid direct contact with the skin.
TPlace a cup under the hot-water spout.
TTouch ‘^’ (bottom left) to go to the product
selector view.
TMove your finger from left to right (or vice
versa) across the touchscreen display until
‘Hot water’ is displayed.
TTouch ‘Prepare’.
‘Hot water’, hot water flows into the cup.
Preparation stops automatically. Your
IMPRESSA is once more ready for use.
3 Daily operation
Switching on the machine
Daily maintenance of the machine and hygiene
when handling milk, coffee and water are key to a
perfect coffee result in the cup every time. You
should therefore change the water daily.
TPlace a receptacle under the dual spout.
9
9
TPress the On/Off button Qto switch the
IMPRESSA on.
‘Welcome to JURA’
‘Machine is heating’
‘Machine is rinsing’, the system rinses itself.
The operation stops automatically.
Your IMPRESSA is ready for use.
Daily maintenance
To ensure that you get many years of reliable
service out of your IMPRESSA and to guarantee the
optimum coffee quality, the machine requires daily
maintenance.
TPull out the drip tray.
TEmpty the coffee grounds container and the
drip tray. Rinse them both with warm water.
EAlways empty the coffee grounds container
when the machine is switched on. This is
the only way of resetting the coffee grounds
counter.
TRefit the coffee grounds container and the
drip tray.
TRinse the water tank with clean water.
TRemove the milk pipe and rinse it thor-
oughly under running water.
TDismantle and rinse the dual spout (see
Chapter 5 ‘Maintenance – Dismantling and
rinsing the dual spout’).
TWipe the surface of the machine with a
clean, soft, damp cloth (e.g. microfiber
cloth).
9

19
4 Permanent settings in programming mode
pt
es
pt
es
fr
ru
en
de
Regular maintenance
Carry out the following maintenance actions
regularly or as required:
UIn the interests of hygiene, we recommend
changing the milk pipe on a regular basis
(approximately every 3 months). Replacement
pipes are available from specialized dealers
(JURA original accessory set for frothers).
UClean the inside of the water tank, e.g. with a
brush. Further information about the water
tank is provided in these instructions for use
(see Chapter 5 ‘Maintenance – Descaling the
water tank’).
UTraces of milk and coffee may stick to the top
and bottom of the cup platform. If this
happens, clean the cup platform.
Switching off the machine
When the IMPRESSA is switched off, the system is
automatically rinsed if a specialty coffee has been
prepared. If milk has been prepared, the milk
system is rinsed too.
TPlace a receptacle under the dual spout.
TPress the On/Off button Q.
‘Machine is rinsing’, ‘Milk system is being
rinsed’, the system rinses itself. The
operation stops automatically. Your
IMPRESSA is switched off.
EEmpty the water tank after switching off.
EWhen the IMPRESSA is switched off with the
On/Off button, the machine does not
consume standby energy.
9
4 Permanent settings in
programming mode
Touch the Menu symbol tfor about 2 seconds to
view the list of maintenance programs and switch
to programming mode. The following settings can
be made:
UDeactivate start screen
UWater hardness
UUnits
UAutomatic switch-off
ULanguage
You can also add your four favourite products to
the start screen (see next chapter).
Replacing products on the start screen
You have the option of replacing the four products
on the start screen with your personal favourites.
Example:Proceed as follows to replace ‘Latte
macchiato’ on the start screen with ‘Latte
macchiato doppio’.
Precondition:The start screen is displayed.
TTouch ‘^’ for about 2 seconds until ‘Replace
which product?’ appears in the bottom right.
TTouch ‘Latte macchiato’.
The product selector view is launched.
TMove your finger from left to right (or vice
versa) across the touchscreen display until
‘Latte macchiato doppio’ is displayed.
TTouch ‘Save’.
‘Saved’ appears briefly on the display.
‘Latte Mac. Doppio’ is displayed in the
selected position on the start screen.
Deactivating the start screen
You can deactivate the start screen so that the
product selector view is displayed as standard.
U‘Start screen’ / ‘Active’
UThe start screen is displayed. You can go to
the product selector view by touching the
‘Rotary Selection’ box.

20
4 Permanent settings in programming mode
U‘Start screen’ / ‘Inactive’
UThe start screen is deactivated. The product
selector view is displayed as standard.
Example:Proceed as follows to deactivate the start
screen.
Precondition:The start screen is displayed.
TTouch the Menu symbol tfor about
2 seconds.
TTouch ‘>’ (bottom right) several times
until the program item ‘Start screen’ is
displayed.
TTouch ‘Start screen’.
‘Start screen’ / ‘Active’
TTouch ‘Inactive’.
TTouch ‘Save’.
‘Saved’ appears briefly on the display.
TTouch the Menu symbol tto exit program-
ming mode.
The product selector view is displayed.
Setting the water hardness
EIf you are using the CLEARYL Blue filter
cartridge and have activated it, it is not
possible to set the water hardness.
The harder the water is, the more frequently the
IMPRESSA needs to be descaled. It is therefore
important to set the water hardness accurately.
The water hardness can be adjusted on a continu-
ous scale between 1 °dH and 30 °dH.
Precondition:The start screen is displayed.
TTouch the Menu symbol tfor about
2 seconds.
TTouch ‘>’ (bottom right).
TTouch ‘>’ several times until ‘Water
hardness’ is displayed.
TTouch ‘Water hardness’.
‘Water hardness’
TTouch ‘<’ or ‘>’ to adjust the water
hardness.
TTouch ‘Save’.
‘Saved’ appears briefly on the display.
TTouch the Menu symbol tto exit program-
ming mode.
The start screen is displayed.
Automatic switch-off
By instructing your IMPRESSA to automatically
switch itself off, you can cut down your energy
consumption. Your IMPRESSA switches off
automatically after the preset time following the
last action on the machine.
You can set the automatic switch-off to 15minutes,
30minutes or 1–15hours.
Precondition:The start screen is displayed.
TTouch the Menu symbol tfor about
2 seconds.
TTouch ‘>’ (bottom right).
TTouch ‘>’ several times until ‘Switch off
after’ is displayed.
TTouch ‘Switch off after’.
‘Switch off after’
TTouch ‘<’ or ‘>’ to change the setting.
TTouch ‘Save’.
‘Saved’ appears briefly on the display.
TTouch the Menu symbol tto exit program-
ming mode.
The start screen is displayed.
Unit for amount of water
You can change the unit for the amount of water
from ‘ml’ to ‘oz’.
Precondition:The start screen is displayed.
TTouch the Menu symbol tfor about
2 seconds.
TTouch ‘>’ (bottom right).
TTouch ‘>’ several times until ‘Units’ is
displayed.
TTouch ‘Units’.
‘Units’
TTouch ‘ml’ or ‘oz’ to select the unit for the
amount of water.