Jura Ena micro 5 User manual

Instructions for use for ENA Micro 5

The Instructions for Use has been awarded the seal of

approval by the independent German Technical

Inspection Agency, TÜV SÜD, due to its easy-to-

understand style, its thoroughness and coverage of

safety aspects.

Table of contents

Your ENA Micro 5

Control elements 30

Important information 32

Proper use...............................................................................................................................................................32

For your safety .......................................................................................................................................................32

1 Preparing and using for the first time 34

Setting up the machine........................................................................................................................................34

Filling the bean container ....................................................................................................................................34

First-time use..........................................................................................................................................................35

First-time use with filter cartridge activation ...................................................................................................35

First-time use without filter cartridge activation.............................................................................................36

Filling the water tank ............................................................................................................................................36

Determining the water hardness........................................................................................................................36

2 Preparation 37

Rotating coffee spout ...........................................................................................................................................37

Ristretto, espresso and coffee .............................................................................................................................37

Permanently setting the amount of water for the cup size...........................................................................38

Adjusting the grinder............................................................................................................................................38

Ground coffee.........................................................................................................................................................39

3 Daily operation 39

Switching on the machine ...................................................................................................................................39

Daily maintenance................................................................................................................................................ 40

Switching off the machine.................................................................................................................................. 40

4 Permanent settings in programming mode 40

Inserting and activating the filter...................................................................................................................... 40

Setting the water hardness.................................................................................................................................. 41

5 Maintenance 41

Cleaning the machine........................................................................................................................................... 41

Descaling the machine ........................................................................................................................................42

Changing the filter.................................................................................................................................................43

Descaling the water tank..................................................................................................................................... 44

Cleaning the bean container .............................................................................................................................. 44

6 Messages on symbol display 45

7 Troubleshooting 46

8 Transport and environmentally friendly disposal 47

Transport/ Emptying the system .......................................................................................................................47

Disposal...................................................................................................................................................................47

9 Technical data 47

10 Index 48

11 JURA contact details/ Legal information 50

Table of contents

Symbol description

Warnings

JWARNING

JCAUTION

Always take note of any information marked with the words CAUTION or WARNING

and a warning sign. The signal word WARNING draws your attention to potential

serious injury, and the signal word CAUTION to potential minor injury.

CAUTION CAUTION draws your attention to potential damage to the machine.

Symbols used

TPrompt to take action. This symbol means that you are being prompted to perform

some action.

EInformation and tips to make it even easier to use your ENA.

Control elements

1 Water tank

2 Mains cable (back of the machine)

3 Coffee grounds container

4 Drip tray

5 Bean container with aroma preservation cover

6 Ventilation slots

7 On/Off button

8 Rotating coffee spout (height-adjustable)

9 Cup grille

Control elements

1 Cover for powder chute for ground coffee

2 Powder chute for ground coffee

3 Cover cap for grinder adjustment switch

4 Grinder adjustment switch

1 Symbol display

&Descaling symbol

!Filter symbol

LCleaning symbol

MWater Tank symbol

vGround Coffee symbol

?Coffee Grounds Container symbol

;Coffee strength ‘normal’

_Coffee strength ‘strong’

YRistretto symbol

<Espresso symbol

>Coffee symbol

Important information

Proper use

The machine is designed and

intended for private domestic use. It

is designed solely for the prepara-

tion of coffee. Use for any other

purpose will be deemed improper.

JURA Elektroapparate AG cannot

accept any responsibility for the

consequences of improper use.

Before using the machine read

these instructions for use thor-

oughly and completely and comply

with the instructions they contain.

A warranty service is not applicable

for damage or defects caused by

non-compliance with the instruc-

tions for use. Keep these instruc-

tions for use close to the machine

and pass them on to the next user.

For your safety

Please carefully read and observe

the important safety information

set out below.

To avoid danger of potentially fatal

electric shock:

UNever use a machine which is

damaged or has a defective

mains cable.

UIn the event of signs of damage,

for example if there is a smell of

burning, unplug the machine

immediately from the mains

supply and contact JURA service.

UIf the mains cable of this

machine is damaged, it must be

repaired either directly by JURA

or by an authorised JURA service

centre.

UMake sure that the ENA and the

mains cable are not located close

to hot surfaces.

UBe careful to ensure that the

mains cable is not trapped and

does not rub against sharp

edges.

UNever open and repair the

machine yourself. Do not modify

the machine in any way that is

not described in these instruc-

tions for use. The machine

contains live parts. If opened,

there is a danger of potentially

fatal injury. Repairs may only be

carried out by authorised JURA

service centres, using original

spare parts and accessories.

A defective machine is not safe and

could cause injury or fire. To avoid

damage and any associated risk of

injury or fire:

UNever allow the mains cable to

loosely hang down. The mains

cable could pose a tripping

hazard or become damaged.

Important information

UProtect the ENA from environ-

mental influences such as rain,

frost and direct sunlight.

UDo not immerse the ENA, mains

cable or connections in water.

UDo not put the ENA or any

individual parts in the dish-

washer.

USwitch your ENA off before clean-

ing work with the On/Off button.

Always wipe the ENA with a

damp cloth rather than a wet

one, and protect it from pro-

longed exposure to water splash.

UOnly connect the machine to the

mains voltage in accordance

with the information on the

rating plate. The rating plate is

located on the underside of your

ENA. Further technical data is

provided in these instructions for

use (see Chapter 9 ‘Technical

data’).

UPlease only use original JURA

maintenance products. Use of

products that are not explicitly

recommended by JURA could

damage the ENA.

UDo not use any coffee beans

treated with additives or cara-

melised coffee beans.

UOnly fill the water tank with

fresh, cold water.

UDo not fill the bean container

with water.

USwitch the machine off with the

On/Off button if you are going to

be absent for a longer period of

time and remove the mains plug

from the power socket.

UChildren may not clean or ser-

vice the machine unless super-

vised by a responsible person.

UDo not allow children to play

with the machine.

UKeep children under the age of 8

away from the machine, or

supervise them constantly.

UChildren aged 8 and over may

only operate the machine with-

out supervision if they have been

instructed in how to use it safely.

Children must be able to recog-

nise and understand the poten-

tial dangers arising from incor-

rect use.

People, including children, who

Udo not have the physical, sen-

sory or mental capabilities to use

the machine safely or

Uare inexperienced or lack knowl-

edge in how to use the machine

safely

must be supervised by a responsi-

ble person when using it, or must

be instructed in how to use it

correctly.

1 Preparing and using for the first time

Safety when handling the CLARIS

Blue filter cartridge:

UFilter cartridges should be kept

out of the reach of children.

UStore filter cartridges in a dry

place in the sealed packaging.

UProtect cartridges from heat and

direct sunlight.

UDo not use damaged filter

cartridges.

UDo not open filter cartridges.

1 Preparing and using for the

first time

This chapter provides you with the information

you need to use your ENA without any problems.

You will prepare your ENA step-by-step to enjoy

your first perfect cup of coffee.

EVisit us on the internet. On the JURA

website (www.jura.com) you will find

interesting and up-to-date information on

your ENA and every aspect of coffee.

Setting up the machine

When setting up your ENA, please note the

following:

UPlace the machine on a horizontal surface that

is not sensitive to water.

UChoose a spot for your ENA which protects the

machine against overheating. Ensure that the

ventilation slots are not covered.

Filling the bean container

CAUTION

Coffee beans which have been treated with

additives (e.g. sugar), ground coffee or freeze-dried

coffee will damage the grinder.

T Only use untreated coffee beans to fill the

bean container.

TRemove the aroma preservation cover of the

bean container.

TRemove any dirt or foreign objects from

inside the bean container.

TFill the bean container with coffee beans.

TClose the bean container.

1 Preparing and using for the first time

First-time use

When using the machine for the first time, you can

choose whether you want to operate ENA with or

without the CLARIS Blue filter cartridge. If the

water hardness is 10°dH or more, we recommend

using the filter cartridge. If you do not know the

hardness of your water, you can find this out first

(see Chapter 1 ‘Preparing and using for the first

time – Determining the water hardness’).

EThe On/Off button also acts as a power

switch. When the ENA is switched off, the

machine does not consume standby energy.

J WARNING

If the machine is operated with a defective mains

cable, there is a danger of potentially fatal electric

shock.

T Never use a machine which is damaged or

has a defective mains cable.

Precondition:Bean container is filled.

TInsert the mains plug into a power socket.

Q T Press the On/Off button to switch the

machine on.

The Descaling symbol&and the Filter

symbol!are lit up.

ENow decide whether you want to operate

your ENA with or without a CLARIS Blue

filter cartridge.

First-time use with filter cartridge

activation

! T Touch the Filter symbol.

The Water Tank symbolMlights up.

TRemove the water tank.

TOpen the filter holder.

TInsert the filter cartridge into the water tank,

exerting slight pressure.

TClose the filter holder. It will click into place

audibly.

EAfter two months, the filter will cease to

work. Set the date on the date plate on the

filter holder in the water tank.

TFill the water tank with fresh, cold water and

reinsert it.

The Filter symbol!lights up.

! T Touch the Filter symbol.

The Y, <, >and !symbols flash. The filter

is rinsed and the water flows directly into the

drip tray.

Rinsing of the filter stops automatically. The

machine heats up.

The Y, <and >symbols flash. The

machine is rinsed, water flows out of the

coffee spout. The rinse stops automatically.

The Coffee Grounds Container symbol?

lights up.

TEmpty the coffee grounds container and

drip tray and rinse with warm water.

TReinsert the coffee grounds container and

the drip tray.

The RistrettoY, Espresso<and Coffee>

symbols and the symbol for ‘strong’ coffee

strength_light up. Your ENA is ready for

use.

1 Preparing and using for the first time

First-time use without filter cartridge

activation

If you do not want to use the CLARIS Blue filter

cartridge, you will need to set the water hardness.

The following water hardness settings are available:

Water hardness Symbol(s) shown in display

Level 1:

1–15°dH

1 symbol illuminated

Level 2:

16-23°dH

2 symbols illuminated

Level 3:

24-30°dH

3 symbols illuminated

Y<>

& T Touch the Descaling symbol.

The Y, <and &symbols light up.

TTouch the Y, <or >symbol to set the

water hardness, e.g. symbol Yfor ‘level 1’.

The Yand &symbols light up.

& T Touch the Descaling symbol.

The Water Tank symbolMlights up.

TPlace a receptacle under the coffee spout.

TRemove the water tank.

TFill the water tank with fresh, cold water and

reinsert it.

The Y, <and >symbols flash. The system

fills with water and the water flows directly

into the drip tray.

The operation stops automatically. The

machine heats up.

The Y, <and >symbols flash. The

machine is rinsed, water flows out of the

coffee spout. The rinse stops automatically.

The RistrettoY, Espresso<, Coffee>and

Coffee strength ‘strong’_symbols light up.

Your ENA is ready for use.

Filling the water tank

Daily maintenance of the machine and hygiene

when handling coffee and water are key to a

perfect coffee result in the cup every time. You

should therefore change the water daily.

CAUTION

Milk, sparkling mineral water or other liquids can

damage the water tank or the machine.

T Only fill the water tank with fresh, cold water.

TRemove the water tank and rinse with cold

water.

TFill the water tank with fresh, cold water and

reinsert it.

Determining the water hardness

You can find out what the water hardness is by

using the Aquadur® test strip supplied as standard.

THold the test strip briefly (for one second)

under running water.

TShake off the water.

TWait for about one minute.

TYou will then be able to read the degree of

water hardness from the discolouration of

the Aquadur® test strip and the description

on the packaging.

The water hardness can now be set.

2 Preparation

EWhile a speciality coffee is being prepared,

you can stop preparation at any time. Simply

touch the symbol for the product in

question.

EIf preparing two speciality coffees, you have

to stop each brewing operation separately.

EBefore and during the grinding operation

you can select the coffee strength of the

ristretto Y, espresso <and coffee >

speciality coffees: ‘normal’ (;), ‘strong’ (_).

The machine always uses the preset amount of

water for the type of coffee in question. You can

change this setting (see Chapter 2 ‘Preparation –

Permanently setting the amount of water for the

cup size’).

Your ENA has an Energy Save Mode: Soon after

the last preparation, the ENA stops heating up.

To indicate that the machine is in energy-saving

mode, after about 5 minutes the brightness of all

the symbols is reduced. The ENA must heat back

up before the next preparation.

Coffee tastes best served hot. A cold porcelain cup

cools the beverage – and impairs the taste. We

therefore recommend prewarming the cups. The

full coffee aroma can develop only in prewarmed

cups. You can purchase a JURA cup warmer from

your specialised dealer.

Rotating coffee spout

Your ENA has a rotating coffee spout for preparing

one or two cups of your desired speciality coffee:

U‘1 cup’ position

U‘2 cups’ position

EThe two coffee spout positions clearly

engage.

EIf the coffee spout is in the ‘2 cups’ position,

the desired speciality coffee is prepared

twice in succession. The coffee strength can

only be set before the first product is

prepared.

Ristretto, espresso and coffee

Ristretto Y, espresso <and coffee >are

prepared following this model.

Example:Proceed as follows to prepare one coffee.

Precondition:Your ENA is ready for use.

TTurn the coffee spout to the ‘1 cup’ position.

TPlace a cup under the coffee spout.

> T Touch the Coffee symbol to start prepara-

tion.

The Coffee >and Coffee strength (;or _)

symbols flash, the preset amount of water

flows into the cup.

Preparation stops automatically. Your ENA is

once more ready for use.

ETo prepare two coffees, turn the coffee

spout to the ‘2 cups’ position. Press the

Coffee symbol >to start preparation of

two cups.

2 Preparation

Permanently setting the amount of water

for the cup size

It is easy to make permanent settings for the

amount of water for all speciality coffees according

to the cup size. Adjust the amount once as shown

in the following example. Every time you prepare a

drink in the future, this amount of water will be

dispensed.

EThe process for adapting the amount of

water to the cup size only works when

preparing one cup. When two cups are

prepared, the set amount is doubled.

Example:Permanently adjust the amount of

espresso to the cup size.

Precondition:Your ENA is ready for use.

TTurn the coffee spout to the ‘1 cup’ position.

TPlace a cup under the dual spout.

< T Touch the Espresso symbol for about

3 seconds until the RistrettoYand

Coffee >symbols appear again.

< T Release the Espresso symbol.

The espresso is prepared. The Espresso<

and Coffee strength symbols (;or _) flash.

< T Touch the Espresso symbol as soon as there

is enough espresso in the cup.

Preparation stops. The amount of water for

one espresso is permanently stored.

The Espresso<and Coffee strength

symbols (;or _) flash until the machine is

ready for use again.

EYou can alter this setting at any time by

repeating the above procedure.

Adjusting the grinder

You can adjust the grinder on a continuous scale to

suit the degree of roast of your coffee.

CAUTION

If you adjust the consistency of grind when the

grinder is not operating, the grinder adjustment

switch could be damaged.

T Only adjust the consistency of grind when

the grinder is running.

EFor a coarser consistency of grind, turn the

switch to the left, for a finer grind, turn it to

the right.

The consistency of grind is correct if the coffee

flows regularly from the coffee spout. In addition a

fine, thick crema forms.

Example:Change the consistency of grind during

the preparation of a ‘strong’ espresso.

TTurn the coffee spout to the ‘1 cup’ position.

TPlace a cup under the coffee spout.

TOpen the cover of the grinder adjustment

switch.

_ T Touch the Coffee strength ‘strong’ symbol.

The Coffee strength ‘strong’ _symbol lights

up.

3 Daily operation

< T Touch the Espresso symbol to start

preparation.

TTurn the grinder adjustment switch to the

desired position while the grinder is

running.

The preset amount of water flows into the

cup. Preparation stops automatically.

EPlease note that changing the consistency of

grind only takes effect for the second coffee

preparation.

Ground coffee

You can choose to use a second coffee variety, for

example decaffeinated coffee, with the powder

chute for ground coffee.

EUse ground coffee which is not ground too

finely. Very fine coffee can block up the

system so that the coffee only comes out in

drips.

EIt is not possible to prepare two cups with

ground coffee. If the coffee spout is in the

‘2 cups’ position, just one cup is prepared.

ENever add more than one level measuring

spoon of ground coffee.

EThe desired speciality coffee must be

prepared within approximately one minute

after filling with the ground coffee.

Otherwise the ENA stops the operation and

is once more ready for use.

EIf you did not add a sufficient amount of

ground coffee, the Y, <, >and vsymbols

flash and the ENA stops the operation.

All speciality coffees with ground coffee are

prepared following this model.

Example:Prepare a cup of coffee using ground

coffee.

Precondition:Your ENA is ready for use.

TPlace a cup under the coffee spout.

TOpen the powder chute for ground coffee.

The Ground Coffee symbol vlights up.

TPlace the filler funnel for ground coffee on

the powder chute.

TPlace one level measuring spoon of ground

coffee into the filler funnel.

TClose the powder chute for ground coffee.

The Y, <, >and vsymbols flash.

The Y, <and >symbols light up.

> T Touch the Coffee symbol to start prepara-

tion.

The Coffee symbol >flashes, the preset

amount of water flows into the cup.

Preparation stops automatically. Your ENA is

once more ready for use.

3 Daily operation

Switching on the machine

Daily maintenance of the machine and hygiene

when handling coffee and water are key to a

perfect coffee result in the cup every time. You

should therefore change the water daily.

When the machine is switched on, it is automati-

cally rinsed.

TPlace a receptacle under the coffee spout.

Q T Press the On/Off button to switch the

machine on.

The Y, <and >symbols flash, the

machine heats up.

The machine is rinsed, water flows out of the

coffee spout. The rinse stops automatically.

Your ENA is ready for use.

4 Permanent settings in programming mode

Daily maintenance

To ensure that you get many years of reliable

service out of your ENA and to guarantee the

optimum coffee quality, the machine requires daily

maintenance.

TRemove the drip tray.

TEmpty the coffee grounds container and

drip tray and rinse with warm water.

TReinsert the coffee grounds container and

the drip tray.

TRinse the water tank with clean water.

TWipe the surface of the machine with a

clean, soft, damp cloth (e.g. microfibre

cloth).

Switching off the machine

When the ENA is switched off, the system is

automatically rinsed if a speciality coffee has been

prepared.

TPlace a receptacle under the coffee spout.

Q T Press the On/Off button.

The Y, <and >symbols flash. The

machine is rinsed, water flows out of the

coffee spout.

The rinse stops automatically. Your ENA is

switched off.

EWhen the ENA is switched off with the On/

Off button, the machine does not consume

standby energy.

EIf no action is performed on the machine for

2 hours, the ENA will automatically switch

off to save energy.

4 Permanent settings in pro-

gramming mode

Inserting and activating the filter

Your ENA no longer has to be descaled if you are

using the CLARIS Blue filter cartridge. If you did not

activate the filter cartridge the first time you used

the machine, you can do this now as follows.

EPerform the ‘inserting the filter’ operation

without any interruptions. This will ensure

that your ENA always produces its best.

Precondition:Your ENA is ready for use.

TTouch the ;and _symbols for approxi-

mately 2 seconds.

The ;, _, &and Lsymbols light up brightly.

! T Touch the Filter symbol for approximately

2 seconds.

The Water Tank symbolMlights up.

TRemove the water tank.

TOpen the filter holder.

TInsert the filter cartridge into the water tank,

exerting slight pressure.

TClose the filter holder. It will click into place

audibly.

EAfter two months, the filter will cease to

work. Set the date on the date plate on the

filter holder in the water tank.

TFill the water tank with fresh, cold water and

reinsert it.

The Coffee Grounds Container symbol?

lights up.

5 Maintenance

TEmpty the drip tray and coffee grounds

container and reinsert them.

The Filter symbol!lights up.

! T Touch the Filter symbol to start rinsing of

the filter

The Y, <, >and !symbols flash. The filter

is rinsed.

Rinsing of the filter stops automatically. The

Coffee Grounds Container symbol?lights

up.

TEmpty the drip tray and coffee grounds

container and reinsert them.

The Y, <and >symbols flash, the

machine heats up. Your ENA is once more

ready for use.

Setting the water hardness

EIf you are using the CLARIS Blue filter

cartridge and have activated it, there is no

need to set the water hardness.

The harder the water is, the more frequently the

ENA needs to be descaled. It is therefore important

to set the water hardness accurately.

The following water hardness settings are available:

Water hard-

ness

Symbol(s) shown in

display

Level 1:

1–15°dH

1 symbol illuminated

Level 2:

16–23°dH

2 symbols illuminated

Level 3:

24–30°dH

3 symbols illuminated

Y<>

Example:Change the water hardness setting from

‘level 2’ (Y<) to ‘level 3’ (Y<>).

Precondition:Your ENA is ready for use.

TTouch the ;and _symbols for approxi-

mately 2 seconds.

The ;, _, &and Lsymbols light up brightly.

& T Briefly touch the Descaling symbol.

The &, Yand <symbols light up.

> T Touch the Coffee symbol.

The &, Y, <and >symbols light up.

& T Touch the Descaling symbol to confirm that

you want to set the water hardness to

‘level 3’.

Your ENA is once more ready for use.

5 Maintenance

Your ENA has the following integrated mainte-

nance programmes:

UCleaning the machine

UDescaling the machine

UChanging the filter

Cleaning the machine

After 180preparations or 80switch-on rinses, the

ENA will prompt you to clean it.

CAUTION

If the wrong cleaning agent is used, the machine

could be damaged and/or traces could be left

behind in the water.

T Use only original JURA maintenance

products.

EThe cleaning programme lasts approxi-

mately 15 minutes.

EDo not interrupt the cleaning programme.

The quality of cleaning will be impaired if

you do so.

EJURA cleaning tablets are available from

specialised dealers.

Precondition:Your ENA is ready for use. The

Cleaning symbolLlights up.

TTurn the coffee spout to the ‘2 cups’

position.

5 Maintenance

L T Touch the Cleaning symbol for approxi-

mately 2 seconds.

The Coffee Grounds Container symbol?

lights up.

TEmpty the drip tray and coffee grounds

container and reinsert them.

The Cleaning symbolLlights up.

TPlace a receptacle under the coffee spout.

L T Touch the Cleaning symbol.

The Y, <, >and Lsymbols flash, water

flows out of the coffee spout.

The operation is interrupted, the Ground

Coffee symbolvlights up.

TOpen the powder chute for ground coffee

and drop in a JURA cleaning tablet.

TClose the powder chute for ground coffee.

The Cleaning symbolLlights up.

L T Touch the Cleaning symbol.

The Y, <, >and Lsymbols flash, water

flows out of the coffee spout several times.

The operation is interrupted, the Coffee

Grounds Container symbol?lights up.

TEmpty the drip tray and coffee grounds

container and reinsert them.

The Y, <and >symbols flash. The

machine heats up.

Your ENA is once more ready for use.

Cleaning the machine without a prompt: You can

initiate the 'Cleaning the machine' operation

manually at any time as long as the machine is

ready for use. Touch the ;and _symbols

simultaneously for approx. 2 seconds. The ;, _,

Land &or !symbols light up brightly. Continue

with the first prompt (indicated by T) as described

in this section.

Descaling the machine

The ENA builds up deposits of limescale over time

and automatically prompts you to descale it when

necessary. The degree of calcification depends on

the hardness of your water.

J CAUTION

If the descaling agent comes into contact with the

skin or eyes, this can cause irritation.

T Avoid contact with the skin or eyes.

T Rinse off the descaling agent with clean

water. Should you get any descaling agent in

your eye, see a doctor.

CAUTION

If the wrong descaling agent is used, the machine

could be damaged and/or traces could be left

behind in the water.

T Use only original JURA maintenance

products.

CAUTION

If the descaling operation is interrupted, there may

be damage to the machine.

T Allow the descaling programme to run to

the end.

CAUTION

If the descaling agent comes into contact with

sensitive surfaces (e.g. marble), damage cannot be

ruled out.

T Clean up any splashes immediately.

EThe descaling programme lasts approxi-

mately 40minutes.

EJURA descaling tablets are available from

specialised dealers.

EIf you use a CLARIS Blue filter cartridge and

this is activated, you will not be prompted to

descale.

Precondition:Your ENA is ready for use. The

Descaling symbol&lights up.

& T Touch the Descaling symbol for approxi-

mately 2 seconds.

The Coffee Grounds Container symbol?

lights up.

5 Maintenance

TEmpty the drip tray and coffee grounds

container and reinsert them.

The Water Tank symbolMflashes.

TRemove and empty the water tank.

TCompletely dissolve the contents of one blis-

ter (three JURA descaling tablets) in a

receptacle holding 500 ml of water. This may

take several minutes.

TPour the solution into the empty water tank

and reinsert the tank.

The Descaling symbol&lights up.

& T Touch the Descaling symbol.

The Y, <, >and &symbols flash, water

flows directly into the drip tray.

The operation is interrupted, the Coffee

Grounds Container symbol?flashes.

TEmpty the drip tray and coffee grounds

container and reinsert them.

The Water Tank symbolMlights up.

TRemove the water tank and rinse thor-

oughly.

TFill the water tank with fresh, cold water and

reinsert it.

The Descaling symbol&lights up.

& T Touch the Descaling symbol.

The Y, <, >and &symbols flash, water

flows directly into the drip tray.

The Y, <and >symbols flash, water flows

out of the drip tray.

The operation is interrupted, the Coffee

Grounds Container symbol?lights up.

TEmpty the drip tray and coffee grounds

container and reinsert them.

Your ENA is once more ready for use.

EIf the descaling operation stops unexpect-

edly, rinse the water tank thoroughly.

Descaling the machine without a prompt: You

can initiate the 'Descaling the machine' operation

manually at any time as long as the machine is

ready for use. Touch the ;and _symbols

simultaneously for approx. 2 seconds. The ;, _,

Land &symbols light up brightly. Continue with

the first prompt (indicated by T) as described in

this section.

Changing the filter

EAfter 50 litres of water have flowed through,

the filter will cease to work. Your ENA will

automatically prompt you to change the

filter.

EAfter two months, the filter will cease to

work. Set the date on the date plate on the

filter holder in the water tank.

EIf the CLARIS Blue filter cartridge is not

activated in programming mode, you will

not be prompted to change the filter.

Precondition:Your ENA is ready for use. The Filter

symbol!lights up.

! T Touch the Filter symbolfor approximately

2 seconds.

The Water Tank symbolMlights up.

TRemove the water tank.

TOpen the filter holder and remove the old fil-

ter cartridge.

TInsert a new filter cartridge into the water

tank, exerting slight pressure.

TClose the filter holder. It will click into place

audibly.

EAfter two months, the filter will cease to

work. Set the date on the date plate on the

filter holder in the water tank.

5 Maintenance

TFill the water tank with fresh, cold water and

reinsert it.

The Coffee Grounds Container symbol?

lights up.

TEmpty the drip tray and coffee grounds

container and reinsert them.

The Filter symbol!lights up.

! T Touch the Filter symbol to start rinsing of

the filter.

The Y, <, >and !symbols flash. The filter

is rinsed. Water flows directly into the drip

tray.

Rinsing of the filter stops automatically. The

Coffee Grounds Container symbol?lights

up.

TEmpty the drip tray and coffee grounds

container and reinsert them.

The machine heats up. Your ENA is once

Popular Coffee Maker manuals by other brands

de Jong Duke

de Jong Duke Edge 2-000 Series user manual

Hamilton Beach

Hamilton Beach 40791-CN instructions

Krups

Krups KP1A3B user manual

Douwe Egberts

Douwe Egberts Cafitesse 700 Operator's manual

Fisher & Paykel

Fisher & Paykel 590336D product manual

Saeco

Saeco 714115344 operating instructions

DeLonghi

DeLonghi BCO264B Important instructions

DèLonghi

DèLonghi EC220 CD Instructions for use

Philips

Philips HD8829 manual

Nespresso

Nespresso EF 451 C 111 Service manual

Panasonic

Panasonic NC-ZF1 operating instructions

cecotec

cecotec Cumbia CREMMAET Vaporissima instruction manual

La Marzocco

La Marzocco GS/3 operating manual

Lelit

Lelit PL042TEMD manual

Sage

Sage Barista Express Impress SES876 quick guide

Cecilware

Cecilware BREW TIME BT2-2 Operation manual

Bunn

Bunn ITB Technical training

Elite Gourmet

Elite Gourmet CCM040 instruction manual

Jura ENA Micro 5 User manual

Popular Coffee Maker manuals by other brands