Jura IMPRESSA Z9 One Touch TFT User manual

IMPRESSA Z9 One Touch TFT Instructions for Use
The Instructions for Use has been awarded the seal of approval by the
independent German Technical Inspection Agency, TÜV SÜD, due to its
easy-to-understand style, its thoroughness and coverage of safety
aspects.

2
Table of contents
Your IMPRESSA Z9 One Touch TFT
Control elements 4
Important information 6
Proper use ......................................................................................................................................................6
For your safety...............................................................................................................................................6
1 Preparing and using for the first time 10
JURA on the Internet....................................................................................................................................10
Setting up the machine ..............................................................................................................................10
Filling the bean container...........................................................................................................................10
First-time use ................................................................................................................................................10
Determining the water hardness ..............................................................................................................13
Adjusting the grinder ..................................................................................................................................14
Filling the water tank...................................................................................................................................15
Connecting milk...........................................................................................................................................15
2 Preparation 16
Ways of preparing a beverage ...................................................................................................................16
Espresso and coffee.....................................................................................................................................17
Preparing two speciality coffees................................................................................................................17
Preparation in ‘coffee à la carte’ mode.....................................................................................................18
Special coffee ................................................................................................................................................19
Latte macchiato, cappuccino .....................................................................................................................19
Warm milk and milk foam.........................................................................................................................20
Ground coffee..............................................................................................................................................20
Permanently setting amounts for the cup size ......................................................................................21
Hot water......................................................................................................................................................23
3 Daily operation 24
Switching on ................................................................................................................................................24
Daily maintenance ......................................................................................................................................24
Switching off ................................................................................................................................................25
4 Permanent settings in programming mode 26
Product settings .......................................................................................................................................... 27
Adding products to the start screen........................................................................................................28
Renaming a product...................................................................................................................................29
Energy-saving mode ..................................................................................................................................30
Automatic switch-off ...................................................................................................................................31
Language...................................................................................................................................................... 32
Restore factory settings .............................................................................................................................32
Rinses ............................................................................................................................................................33
Setting the water hardness .......................................................................................................................34
Unit for amount of water...........................................................................................................................35
Display settings ...........................................................................................................................................35
Querying information ................................................................................................................................36

3
Table of contents
Warnings
J WARNING
J CAUTION
Always take note of any information marked with the words CAUTION or
WARNING and a warning sign. The signal word WARNING draws your attention
to potential serious injury, and the signal word CAUTION to potential minor
injury.
CAUTION CAUTION draws your attention to potential damage to the machine.
Symbols used
TPrompt to take action. This symbol means that you are being prompted to
perform some action.
EInformation and tips to make it even easier to use your IMPRESSA.
‘Espresso’ Display
Symbol description
5 Maintenance 37
Rinsing the machine................................................................................................................................... 37
Rinsing the cappuccino frother ................................................................................................................38
Cleaning the cappuccino frother..............................................................................................................38
Dismantling and rinsing the cappuccino frother ..................................................................................39
Inserting and activating the filter.............................................................................................................40
Changing the filter.......................................................................................................................................41
Cleaning the machine ................................................................................................................................42
Descaling the machine ..............................................................................................................................44
Cleaning the bean container.....................................................................................................................46
Descaling the water tank ...........................................................................................................................46
6 Display messages 47
7 Troubleshooting 49
8 Transport and environmentally friendly disposal 51
Transport/ Emptying the system..............................................................................................................51
Disposal..........................................................................................................................................................51
9 Technical data 52
10 Index 53
11 JURA contact details/ Legal information 56

4
Control elements
Control elements
4
11
1
2
7
6
5
3
9
12
14
13
8
10
1 Bean container cover
2 Water tank cover
3 Water tank
4 Power switch and mains cable(side of
machine)
5 Height-adjustable cappuccino frother
6 Coffee grounds container
7 Drip tray
8 Grinder adjustment switch
9 Bean container with aroma preservation
cover
10 Filler funnel cover
11 Filler funnel for ground coffee
12 Hot-water spout
13 Height- and width-adjustable coffee spout
14 Cup grille

5
Control elements
31 2
4
5
Top of the machine
1 QOn/Off button
2 gRotary Switch
3 OP button (programming)
Front
4 Display
5 Multi-function buttons (button function
depends on what is shown in the display)

6
Important information
Important information
The machine is designed and intended for private
domestic use. It should only be used for coffee
preparation and to heat milk and water. Use for any
other purpose will be deemed improper. JURA
Elektroapparate AG cannot accept any responsi-
bility for the consequences of improper use.
Before using the machine read these instructions
for use thoroughly and completely and comply
with the instructions they contain. A warranty ser-
vice is not applicable for damage or defects caused
by non-compliance with the instructions for use.
Keep these instructions for use close to the machine
and pass them on to the next user.
Please carefully read and observe the important
safety information set out below.
To avoid danger of potentially fatal electric shock:
UNever use a machine which is damaged or has
a defective mains cable.
UIn the event of signs of damage, for example if
there is a smell of burning, unplug the machine
immediately from the mains supply and con-
tact JURA service.
UIf the mains cable of this machine is damaged,
it must be repaired either directly by JURA or
by an authorised JURA service centre.
UMake sure that the IMPRESSA and the mains
cable are not located close to hot surfaces.
UBe careful to ensure that the mains cable is not
trapped and does not rub against sharp edges.
Proper use
For your safety
J

7
Important information
UNever open and repair the machine yourself.
Do not modify the machine in any way that is
not described in these instructions for use. The
machine contains live parts. If opened, there is
a danger of potentially fatal injury. Repairs
may only be carried out by authorised JURA
service centres, using original spare parts and
accessories.
UTo completely and safely disconnect the
machine from the power supply, first switch
off the IMPRESSA using the On/Off button and
then at the power switch. Only then should
you remove the mains plug from the power
socket.
There is a risk of scalds or burns on the spouts and
the cappuccino frother.
UPlace the machine out of the reach of children.
UDo not touch any hot parts. Use the handles
provided.
UEnsure that the cappuccino frother is correctly
fitted and clean. If incorrectly fitted or if they
become blocked, the cappuccino frother or its
parts might come off.
A defective machine is not safe and could cause
injury or fire. To avoid damage and any associated
risk of injury or fire:
UNever allow the mains cable to loosely hang
down. The mains cable could pose a tripping
hazard or become damaged.
UProtect the IMPRESSA from environmental
influences such as rain, frost and direct sun-
light.

8
Important information
UDo not immerse the IMPRESSA, mains cable or
connections in water.
UDo not put the IMPRESSA or any individual
parts in the dishwasher.
USwitch your IMPRESSA off at the power switch
before any cleaning operation. Always wipe
the IMPRESSA with a damp cloth rather than a
wet one, and protect it from prolonged expo-
sure to water splash.
UOnly connect the machine to the mains volt-
age in accordance with the information on the
rating plate. The rating plate is located on the
underside of your IMPRESSA. Further technical
data is provided in these instructions for use
(see Chapter 9 ‘Technical data’).
UPlease only use original JURA maintenance
products. Use of products that are not explic-
itly recommended by JURA could damage the
IMPRESSA.
UDo not use any coffee beans treated with addi-
tives or caramelised coffee beans.
UOnly fill the water tank with fresh, cold water.
USwitch the machine off at the power switch if
you are going to be absent for a longer period
of time.
UChildren may not carry out cleaning or main-
tenance without supervision by a responsible
person.
UDo not allow children to play with the machine.
UKeep children under 8 years of age away from
the machine and/or supervise them con-
stantly.

9
Important information
UChildren aged 8 and over may only use the
machine without supervision if they have been
instructed in how to use it safely. Children
must be aware of and understand the possible
dangers caused by misusing the machine.
People, including children, who
Udo not have the physical, sensory or mental
capabilities to use the machine safely or
Uare inexperienced or lack knowledge in how to
use the machine safely
must be supervised by a responsible person when
using it, or must be instructed in how to use it cor-
rectly.
Safety when handling the CLARIS Blue filter car-
tridge:
UFilter cartridges should be kept out of the
reach of children.
UStore filter cartridges in a dry place in the
sealed packaging.
UProtect cartridges from heat and direct sun-
light.
UDo not use damaged filter cartridges.
UDo not open filter cartridges.

10
1 Preparing and using for the first time
1 Preparing and using for the first time
Visit us on the Internet. You can download short operating instruc-
tions for your machine from the JURA website (www.jura.com). You
will also find interesting and up-to-date information on your
IMPRESSA and on every aspect of coffee.
When setting up your IMPRESSA, please note the following:
UPlace the IMPRESSA on a horizontal surface that is not sensi-
tive to water.
UChoose a spot for your IMPRESSA which protects the machine
against overheating. Ensure that the ventilation slots are not
covered.
The bean container has an aroma preservation cover. This will ensure
that your coffee beans retain their aroma for longer.
Coffee beans which have been treated with additives (e.g. sugar),
ground coffee or freeze-dried coffee will damage the grinder.
T Only use untreated coffee beans to fill the bean container.
TOpen the bean container cover and remove the aroma pres-
ervation cover.
TRemove any dirt or foreign objects from inside the bean
container.
TFill the bean container with coffee beans, then close the
aroma preservation cover and the bean container cover.
When using the machine for the first time, you can choose whether
you want to operate IMPRESSA with or without the CLARIS Blue fil-
ter cartridge. If the water hardness is 10 °dH or more, we recommend
using the filter cartridge. If you do not know the hardness of your
water, you can find this out first (see Chapter 1 ‘Preparing and using
for the first time – Determining the water hardness’).
If the machine is operated with a defective mains cable, there is a
danger of potentially fatal electric shock.
T Never use a machine which is damaged or has a defective
mains cable.
JURA on the Internet
Setting up the machine
Filling the bean container
CAUTION
First-time use
JWARNING

11
1 Preparing and using for the first time
Precondition:The bean container has been filled.
TInsert the mains plug into a power socket.
 3 TSwitch on the IMPRESSA using the power switch on the left-
hand side of the machine.
 Q TPress the On/Off button to switch the IMPRESSA on.
The display shows the languages you can choose from.
ETo display more languages, press the ‘Next’ button (bottom
right).
TPress the button that corresponds to the language you want,
e.g. ‘English’.
‘Saved’ appears briefly on the display to confirm the setting.
‘Use filter’
ENow decide whether you want to operate your IMPRESSA with
or without a CLARIS Blue filter cartridge.
Milk, sparkling mineral water or other liquids can damage the water
tank or the machine.
T Only fill the water tank with fresh, cold water.
TPress the ‘Save’ button.
‘Saved’ appears briefly on the display.
‘Insert filter.’
TOpen the water tank cover.
TRemove the water tank and rinse it with cold water.
TRemove the filter cartridge extension from the Welcome
Pack.
TFit the filter extension on top of a CLARIS Blue filter cartridge.
TOpen the filter holder and insert the filter cartridge into the
water tank, exerting slight pressure.
TClose the filter holder. It will click into place audibly.
EAfter two months, the filter will cease to work. Set the date on
the date plate on the filter holder in the water tank.
TFill the water tank with fresh, cold water and reinsert the
tank.
First-time use with filter
cartridge activation
CAUTION

12
1 Preparing and using for the first time
TPlace a receptacle (at least 500ml) under the cappuccino
frother.
TPress the ‘Next’ button.
‘Filter is beingrinsed.’, water flows out of the cappuccino
frother.
EYou can interrupt rinsing of the filter at any time by pressing
any button. Press the Rotary Switchkto continue rinsing of
the filter.
EThe water may be slightly discoloured. This is not harmful to
health and does not affect the taste.
Rinsing of the filter stops automatically after approximately
500ml.
‘Filter rinsing complete’
‘System is filling.’, the system fills up with water.
‘Welcome to JURA’
‘Machine is heating.’
‘Press the Rotary Switch.’, the Rotary Switch lights up.
TEmpty the receptacle and place it under the coffee spout.
 k TPress the Rotary Switch.
‘Machine is rinsing.’, water flows out of the coffee spout. The
rinse stops automatically. ‘Please select product:’ appears on
the display. Your IMPRESSA is ready for use.
Milk, sparkling mineral water or other liquids can damage the water
tank or the machine.
T Only fill the water tank with fresh, cold water.
TPress the ‘Inactive’ button.
TPress the ‘Save’ button.
‘Saved’ appears briefly on the display.
‘Water hardness’ ‘16°dH’
First-time use without filter
cartridge activation
CAUTION

13
1 Preparing and using for the first time
EIf you do not know the hardness of your water, you must find
this out first (see Chapter 1 ‘Preparing and using for the first
time – Determining the water hardness’).
 g TTurn the Rotary Switch to change the water hardness set-
ting, e.g. to ‘25°dH’.
TPress the ‘Save’ button.
‘Saved’ appears briefly on the display.
‘Fill water tank.’
TOpen the water tank cover.
TRemove the water tank and rinse it with cold water.
TFill the water tank with fresh, cold water and reinsert the
tank.
‘System is filling.’, the system fills up with water.
‘Welcome to JURA’
‘Machine is heating.’
‘Press the Rotary Switch.’, the Rotary Switch lights up.
TPlace a receptacle under the coffee spout.
 k TPress the Rotary Switch.
‘Machine is rinsing.’, water flows out of the coffee spout. The
rinse stops automatically. ‘Please select product:’ appears on
the display. Your IMPRESSA is ready for use.
You can find out what the water hardness is by using the Aquadur®
test strip supplied as standard.
THold the test strip briefly (for 1second) under flowing water.
Shake off the water.
TWait for about 1minute.
TYou will then be able to read the degree of water hardness
from the discolouration of the Aquadur® test strip and the
description on the packaging.
Determining the water
hardness

14
1 Preparing and using for the first time
You can adjust the grinder on a continuous scale to suit the degree
of roast of your coffee.
If you adjust the consistency of grind when the grinder is not oper-
ating, the grinder adjustment switch could be damaged.
T Only adjust the consistency of grind when the grinder is run-
ning.
The consistency of grind is correct if the coffee flows regularly from
the coffee spout. In addition a fine, thick crema forms.
Example: Proceed as follows to change the consistency of grind
during the preparation of an espresso.
Precondition:‘Please select product:’ is displayed.
TOpen the bean container cover.
TPlace a cup under the coffee spout.
TPress the ‘Espresso’ button.
The grinder starts up. ‘Espresso’ is displayed.
TTurn the grinder adjustment switch to the desired position
while the grinder is running.
The espresso is prepared and the consistency of grind is
adjusted.
TClose the bean container cover.
Adjusting the grinder
CAUTION

15
1 Preparing and using for the first time
Daily maintenance of the machine and hygiene when handling milk,
coffee and water are key to a perfect coffee result in the cup every
time. You should therefore change the water daily.
Milk, sparkling mineral water or other liquids can damage the water
tank or the machine.
T Only fill the water tank with fresh, cold water.
TOpen the water tank cover.
TRemove the water tank and rinse it with cold water.
TFill the water tank with fresh, cold water and reinsert the
tank.
TClose the water tank cover.
Your IMPRESSA creates fine, creamy, feather-light milk foam with a
perfect consistency. The most important requirement for frothing
milk is a milk temperature of 4–8°C. We would therefore recom-
mend using a milk cooler or a vacuum milk container.
TRemove the protective cover from the cappuccino frother.
TAttach the milk pipe to the cappuccino frother. To do this,
attach the end of the milk pipe to the connector on the left-
hand side of the cappuccino frother. Use the short pipe for
a milk container and the long pipe for a milk carton.
TConnect the other end of the milk pipe to a milk container
or immerse it in a milk carton (Figure: JURA 0.6 litre stainless
steel vacuum milk container).
Filling the water tank
CAUTION
Connecting milk

16
2 Preparation
2 Preparation
EWhile a product is being prepared, you can stop preparation
at any time. Just press any button.
EDuring preparation, you can change the preset amounts by
turning the Rotary Switch g.
EYou can follow the current status of preparation on the display.
Coffee tastes best served hot. A cold porcelain cup cools the bever-
age – and impairs the taste. We therefore recommend prewarming
the cups. The full coffee aroma can develop only in prewarmed cups.
You can purchase a JURA cup warmer from your specialised dealer.
You can make permanent settings for all products in programming
mode (see Chapter 4 ‘Permanent settings in programming mode –
Product settings’).
The IMPRESSA offers various ways of preparing a speciality coffee,
milk or hot water:
UAt the touch of a button: Simply press the corresponding
preparation button for the product shown on the display
(start screen) that you want.
The following products are displayed as standard on the start
screen:
U‘Espresso’
U‘Coffee’
U‘Cappuccino’
U‘Latte macchiato’
U‘Hot water’
U‘1 portion milk’
UUsing the product selector (Rotary Selection): Only some of
the products you can prepare are shown on the start screen.
As soon as you turn the Rotary Switch, more products are dis-
played in a product selector.
Turn the Rotary Switch to bring the product you want into
focus. Start preparation by pressing the Rotary Switch or the
‘Prepare’ button.
Ways of preparing a
beverage

17
2 Preparation
The following additional products are shown in the product
selector:
U‘Ristretto’
U‘2 ristretti’
U‘2 espressi’
U‘2 coffees’
U‘Special coffee’
UIn coffee à la carte mode: Briefly press the Rotary Switch once
to enter ‘coffee à la carte’ mode. In this mode you can select
the coffee strength and amounts before preparation.
EThe machine will exit from the product selector and ‘coffee à
la carte’ mode automatically after 5 seconds if no preparation
is started.
EYou can assign your favourite drinks to the multi-function but-
tons and the product selector. (see Chapter 4 ‘Permanent set-
tings in programming mode – Adding products to the start
screen’).
‘Espresso’ and ‘Coffee’ are prepared at the touch of a button follow-
ing this model.
Example:Proceed as follows to prepare one coffee at the touch of a
button.
Precondition:‘Please select product:’ is displayed.
TPlace a cup under the coffee spout.
TPress the ‘Coffee’ button.
Preparation starts. The preset amount of water for coffee
flows into the cup.
Preparation stops automatically. ‘Please select product:’
appears on the display.
Two ristretti, two espressi or two coffees can always be prepared fol-
lowing the same model: Press the preparation button you want
twice within two seconds or select the desired double product in
the product selector.
Espresso and coffee
Preparing two speciality
coffees

18
2 Preparation
Briefly press the Rotary Switch once to enter ‘coffee à la carte’ mode.
In this mode you can select the coffee strength and amounts before
preparation.
EThe settings made in ‘coffee à la carte’ mode are one-off set-
tings and are not stored.
EThe machine will exit ‘coffee à la carte’ mode automatically
after 5 seconds if no preparation is started.
EYou cannot prepare double products in ‘coffee à la carte’
mode.
Example:Proceed as follows to prepare an espresso in ‘coffee à la
carte’ mode.
Precondition:‘Please select product:’ is displayed.
TPlace a cup under the coffee spout.
 k TBriefly press the Rotary Switch to enter ‘coffee à la carte’
mode.
‘Café àla carte’
The products you can prepare in this mode are displayed.
EYou can also select the products in the product selector. To do
this, turn the Rotary Switch to view the product selector.
TPress the ‘Espresso’ button.
‘Coffee strength’ appears on the display.
 g TTurn the Rotary Switch to adjust the coffee strength.
 k TPress the Rotary Switch to confirm the setting.
‘Volume’/ ‘45ml’ appears on the display.
 g TTurn the Rotary Switch to adjust the fill volume.
 k TPress the Rotary Switch to confirm the setting.
Preparation starts. The espresso is prepared using the
selected settings.
Preparation stops automatically. ‘Please select product:’
appears on the display.
Preparation in ‘coffee à la
carte’ mode

19
2 Preparation
Example:Proceed as follows to prepare a special coffee using the
product selector.
Precondition:‘Please select product:’ is displayed.
TPlace a cup under the cappuccino frother.
 g TTurn the Rotary Switch to view the product selector.
 g TTurn the Rotary Switch until the ‘Special coffee’ product is in
focus.
 k TPress the Rotary Switch to start preparation.
Preparation starts. The preset amount of water for special
coffee flows into the cup.
Preparation stops automatically. ‘Please select product:’
appears on the display.
Your IMPRESSA can prepare a latte macchiato or cappuccino at the
touch of a button. There is no need to move the glass or cup.
Example:Proceed as follows to prepare one latte macchiato at the
touch of a button.
Precondition:‘Please select product:’ is displayed. Milk is connected
to the cappuccino frother.
TPlace a glass under the cappuccino frother (Figure: JURA
0.6 litre stainless steel vacuum milk container).
EEnsure that the level of the milk is no higher than the milk
pipe connection on the cappuccino frother.
TTurn the setting wheel of the cappuccino frother to the Milk
Foam position ü.
TPress the ‘Latte macchiato’ button.
‘Latte macchiato’, the milk foam is prepared.
Preparation stops automatically when the preset amount of
milk is reached.
EThere is a short interval while the hot milk separates from the
milk foam. This allows the typical layers of a latte macchiato
to form. You can choose the length of this interval in program-
ming mode (see Chapter 4 ‘Permanent settings in program-
ming mode – Product settings’).
Special coffee
Latte macchiato,
cappuccino

20
2 Preparation
Coffee preparation starts. The preset amount of water for
espresso flows into the glass.
Preparation stops automatically. ‘Please select product:’
appears on the display.
To ensure that the cappuccino frother always works properly, you
must clean it daily when you have been preparing milk (see Chap-
ter 5 ‘Maintenance – Cleaning the cappuccino frother’). Your
IMPRESSA will not prompt you to clean the cappuccino frother.
Example:Proceed as follows to prepare hot milk at the touch of a
button.
Precondition:‘Please select product:’ is displayed. Milk is connected
to the cappuccino frother.
TPlace a cup under the cappuccino frother.
TTurn the setting wheel of the cappuccino frother to the Milk
position z.
EIf you want to prepare milk foam, turn the setting wheel of
the cappuccino frother to the Milk Foam position ü.
TPress the ‘1 portion milk’ button.
The hot milk is prepared. The preset amount of milk flows
into the cup.
Preparation stops automatically. ‘Please select product:’
appears on the display.
To ensure that the cappuccino frother always works properly, you
must clean it daily when you have been preparing milk (see Chap-
ter 5 ‘Maintenance – Cleaning the cappuccino frother’). Your
IMPRESSA will not prompt you to clean the cappuccino frother.
You can choose to use a second coffee variety, for example decaf-
feinated coffee, with the filter funnel for ground coffee.
ENever add more than two level measuring spoons of ground
coffee.
EUse ground coffee which is not ground too finely. Very fine
coffee can block up the system so that the coffee only comes
out in drips.
Warm milk and milk
foam
Ground coffee