JVC Arsenal KD-AHD39 User manual

KD-HDR30
I-Q) Radio" ~ =5:2
Only for KD-AHD39
o @:
•C· =0====== a
(illD§~
DIGITAL AUDIO
ITEXT I
KD·AHD39
KD-AHD39/KD-HDR30
CD RECEIVER
RECEPTOR CON CD
RECEPTEUR CD
..Ive
For canceling the display demonstration, see page 7.
Para cancelar la demostraci6n en pantalla, consulte la pagina 7.
Pour annuler la demonstration des affichages, referez-vous it la page 7.
For installation and connections, refer to the separate manual.
Para la instalaci6n y las conexiones, refierase al manual separado.
Pour I'installation et les raccordements, se referer au manuel separe.
INSTRUCTIONS
MANUAL DE INSTRUCCIONES
MANUEL D'INSTRUCTIONS
For customer Use:
Enter below the Model No. and
Serial No. which are located
on the top or bottom of the
cabinet. Retain this information
for future reference.
Model No.
Serial No.
LVT1775-001A
[J]
KD-HDR30
I-Q) Radio" ~ =5:2
Only for KD-AHD39
o @:
•C· =0====== a
(illD§~
DIGITAL AUDIO
ITEXT I
KD·AHD39
KD-AHD39/KD-HDR30
CD RECEIVER
RECEPTOR CON CD
RECEPTEUR CD
..Ive
For canceling the display demonstration, see page 7.
Para cancelar la demostraci6n en pantalla, consulte la pagina 7.
Pour annuler la demonstration des affichages, referez-vous it la page 7.
For installation and connections, refer to the separate manual.
Para la instalaci6n y las conexiones, refierase al manual separado.
Pour I'installation et les raccordements, se referer au manuel separe.
INSTRUCTIONS
MANUAL DE INSTRUCCIONES
MANUEL D'INSTRUCTIONS
For customer Use:
Enter below the Model No. and
Serial No. which are located
on the top or bottom of the
cabinet. Retain this information
for future reference.
Model No.
Serial No.
LVT1775-001A
[J]

Thank you for purchasing a JVC product.
Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best
possible performance from the unit.
INFORMATION (For U.S.A.}
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radiolTV technician for help.
Changes or modifications not approved by JVC could void the user's authority to operate the equipment.
IMPORTANT FOR LASER PRODUCTS
1. CLASS 1 LASER PRODUCT
2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave all servicing to qualified
service personnel.
3. CAUTION: (For U.S.A.) Visible and/or invisible class II laser radiation when open. Do not stare into beam.
(For Canada) Visible and/or invisible class 1M laser radiation when open. Do not view directly with optical instruments.
4. REPRODUCTION OF LABEL: CAUTION LABEL, PLACED OUTSIDE THE UNIT.
CAUTION ATTENTION
AVIS~
VARNING
U
CAUTION
VISIBLE AND/OR RAVONNEMENT LASER RADIACION LASER SYNUG OCH/EULER ::fl(tiil VISIBLE AND I OR
INVISIBLE CLASS 1M VISIBLE ET I OU DE CL.ASE 1M OSYNLIG
At.lIft:I1HI
INVISIBLE CLASS n
LASER RADIATION INVISIBL£ DE CLASSE
VISIll.E v/O INXISIBLE
LASERSTRAlNING.
1)~';1.1M
LASER RADIATION
WHEN OPEN. DO NOT 1M UNE FOIS OUVERT. CUANDO EST KLASS 1II, NAIl DENNA
v-1-UiJC
WHEN OPEN.
VIEW D1RECTL V WITH NE PAS REGARDER ABIERTO. NO MIRAR DEL All OPPNAD.
lllU.
DO NOT STARE
OPTICAL INSTRUMENTS. DIRECTEMENT AVEC DIRECTAMENTE BETRAKTA EJ
~".~I'
INTO BEAM.
IEC60825-1:2001 DES INSTRUMENTS
~STRUMENTAL
STlW.£N MED OPTISKA
IflL\~( t:~L\. FDA 21 CFR (ENG)
(ENG)
OPTIQUES. (FAA)
• (ESP)
INSTRUMENT. (sWEl (JPNl
LV«603'OO3A
[European Union only]
-
-
• How to reset your unit
• Your preset adjustments will also be erased (except the
registered Bluetooth device, see pages 19 and 20).
• How to forcibly eject a disc
ATT +
• If this does not work, reset your unit.
• Be careful not to drop the disc when it ejects.
Thank you for purchasing a JVC product.
Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best
possible performance from the unit.
INFORMATION (For U.S.A.}
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radiolTV technician for help.
Changes or modifications not approved by JVC could void the user's authority to operate the equipment.
IMPORTANT FOR LASER PRODUCTS
1. CLASS 1 LASER PRODUCT
2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave all servicing to qualified
service personnel.
3. CAUTION: (For U.S.A.) Visible and/or invisible class II laser radiation when open. Do not stare into beam.
(For Canada) Visible and/or invisible class 1M laser radiation when open. Do not view directly with optical instruments.
4. REPRODUCTION OF LABEL: CAUTION LABEL, PLACED OUTSIDE THE UNIT.
CAUTION ATTENTION
AVIS~
VARNING
U
CAUTION
VISIBLE AND/OR RAVONNEMENT LASER RADIACION LASER SYNUG OCH/EULER ::fl(tiil VISIBLE AND I OR
INVISIBLE CLASS 1M VISIBLE ET I OU DE CL.ASE 1M OSYNLIG
At.lIft:I1HI
INVISIBLE CLASS n
LASER RADIATION INVISIBL£ DE CLASSE
VISIll.E v/O INXISIBLE
LASERSTRAlNING.
1)~';1.1M
LASER RADIATION
WHEN OPEN. DO NOT 1M UNE FOIS OUVERT. CUANDO EST KLASS 1II, NAIl DENNA
v-1-UiJC
WHEN OPEN.
VIEW D1RECTL V WITH NE PAS REGARDER ABIERTO. NO MIRAR DEL All OPPNAD.
lllU.
DO NOT STARE
OPTICAL INSTRUMENTS. DIRECTEMENT AVEC DIRECTAMENTE BETRAKTA EJ
~".~I'
INTO BEAM.
IEC60825-1:2001 DES INSTRUMENTS
~STRUMENTAL
STlW.£N MED OPTISKA
IflL\~( t:~L\. FDA 21 CFR (ENG)
(ENG)
OPTIQUES. (FAA)
• (ESP)
INSTRUMENT. (sWEl (JPNl
LV«603'OO3A
[European Union only]
-
-
• How to reset your unit
• Your preset adjustments will also be erased (except the
registered Bluetooth device, see pages 19 and 20).
• How to forcibly eject a disc
ATT +
• If this does not work, reset your unit.
• Be careful not to drop the disc when it ejects.

-
If you need to operate the unit while driving, be sure
to look around carefully or you may be involved in a
traffic accident.
_-j' ... I.lillll"-I----------- .....
Temperature inside the car ...
If you have parked the car for a long time in hot or cold
weather, wait until the temperature in the car becomes
normal before operating the unit.
For safety ...
• Do not raise the volume level too much, as this will block
outside sounds, making driving dangerous.
• Stop the car before performing any complicated
operations.
USER 'ti!I
~ MO
~I~ -~f10rJO
Time countdown indicator
Ex.: When number button 2 works as the
MO (monaural) button ...
1ol00E 8 1ol0
~
"
Press briefly.
~
\,
Press repeatedly.
"' ..
@@
;-~;;f '-?J:,:"
I!P
~
\('
-,;
Press either one. "
.,' ... ~~
,.
~
Press and hold until your
ILa
desired response begins.
~~
Press and hold both buttons at
' +:¢J
;>; '.
ILa
the same time.
The following marks are used to indicate ...
If±@;~~·1 : Built-in CD player operations.
&ill : External CD changer operations.
o : Indicator displayed for the corresponding
operation.
• How to read this manual
• Button operations are mainly explained using the
illustrations in the table below.
• Illustrations of KD-HDR30 are mainly used for
explanation.
• Some related tips and notes are explained in "More about
this unit" (see pages 31 - 33).
To use these buttons for their original functions again
after pressing the M MODE button, wait for 5 seconds
without pressing any of these buttons until the functions
mode is cleared or press the M MODE button again .
• How to use the M MODE button
If you press the M MODE button, the unit goes into
functions mode, then the number buttons and JIJi,./''Y
buttons work as different function buttons.
-
If you need to operate the unit while driving, be sure
to look around carefully or you may be involved in a
traffic accident.
_-j' ... I.lillll"-I----------- .....
Temperature inside the car ...
If you have parked the car for a long time in hot or cold
weather, wait until the temperature in the car becomes
normal before operating the unit.
For safety ...
• Do not raise the volume level too much, as this will block
outside sounds, making driving dangerous.
• Stop the car before performing any complicated
operations.
USER 'ti!I
~ MO
~I~ -~f10rJO
Time countdown indicator
Ex.: When number button 2 works as the
MO (monaural) button ...
1ol00E 8 1ol0
~
"
Press briefly.
~
\,
Press repeatedly.
"' ..
@@
;-~;;f '-?J:,:"
I!P
~
\('
-,;
Press either one. "
.,' ... ~~
,.
~
Press and hold until your
ILa
desired response begins.
~~
Press and hold both buttons at
' +:¢J
;>; '.
ILa
the same time.
The following marks are used to indicate ...
If±@;~~·1 : Built-in CD player operations.
&ill : External CD changer operations.
o : Indicator displayed for the corresponding
operation.
• How to read this manual
• Button operations are mainly explained using the
illustrations in the table below.
• Illustrations of KD-HDR30 are mainly used for
explanation.
• Some related tips and notes are explained in "More about
this unit" (see pages 31 - 33).
To use these buttons for their original functions again
after pressing the M MODE button, wait for 5 seconds
without pressing any of these buttons until the functions
mode is cleared or press the M MODE button again .
• How to use the M MODE button
If you press the M MODE button, the unit goes into
functions mode, then the number buttons and JIJi,./''Y
buttons work as different function buttons.

..
Control panel
[lID KD-AHD39
7 IQ
tli.,
OJ ... (up) /... (down) buttons
W ~ (eject) button
W0/1 An (standby/on attenuator) button
[i] Control dial
W Remote sensor
DO NOT expose the remote sensor to strong light
(direct sunlight or artificial lighting).
[]] BAND button
[I] Loading slot
[]] Display window
[ill KD-AHD39: CS-A (SRS Circle Surround Auto
lM
) button
KD-HDR30: EQ (equalizer) button
!IQ] DISP (display) button
[TIl ,A, (control panel release) button
KD-HDR30
[g] SRC (source) button
[1] ~ v /~ A. buttons
[H] AUX (auxiliary) button
[J]] SEL (select) button
[§] M MODE button
ITZl Number buttons
um KD-AHD39: EQ (equalizer) button
~ MO (monaural) button
~ SSM (Strong-station Sequential Memory) button
[g] HOLD button
~ RPT (repeat) button
[§ RND (random) button
~ AUX (auxiliary) input jack
..
Control panel
[lID KD-AHD39
7 IQ
tli.,
OJ ... (up) /... (down) buttons
W ~ (eject) button
W0/1 An (standby/on attenuator) button
[i] Control dial
W Remote sensor
DO NOT expose the remote sensor to strong light
(direct sunlight or artificial lighting).
[]] BAND button
[I] Loading slot
[]] Display window
[ill KD-AHD39: CS-A (SRS Circle Surround Auto
lM
) button
KD-HDR30: EQ (equalizer) button
!IQ] DISP (display) button
[TIl ,A, (control panel release) button
KD-HDR30
[g] SRC (source) button
[1] ~ v /~ A. buttons
[H] AUX (auxiliary) button
[J]] SEL (select) button
[§] M MODE button
ITZl Number buttons
um KD-AHD39: EQ (equalizer) button
~ MO (monaural) button
~ SSM (Strong-station Sequential Memory) button
[g] HOLD button
~ RPT (repeat) button
[§ RND (random) button
~ AUX (auxiliary) input jack

Display window
~ Status of Bluetooth device
(Device number, [1 - 5]; signal strength, [0 - 3]*1;
battery reminder, [0 - 3]*1)
[g§] Tr (track) indicator
[nJ Sub-display
~ Bluetooth indicator
lights up when a Bluetooth device is connected.
~ Playback source indicators-
CH: Lights up only when CD-CH is selected as the
playback source.
DISC: Lights up only when CD is selected as the
playback source.
@Q] Playback mode / item indicators- RND (random), •
(disc),,, (folder), RPT (repeat)
Remote controller - RM·RK50
@I] Tuner reception indicators-ST (stereo), MO
(monaural), HOLD (reception hold), HD (HD Radio™
broadcasting)
~ Sound mode (preset equalizer) indicators-ClASSIC,
HIP HOP, JAZZ, ROCK, POPS, USER
~ EQ (equalizer) indicator
~ Information indicators-TAG, Iii (folder), A (track/
file, CS II encoded HD Radio signal*2)
~ Main display
*1 As the signal/battery becomes stronger, the number
increases.
*2 KD-AHD39 only
• Installing the lithium coin battery (CR202S)
CR2025
If the range of effectiveness of the remote controller
decreases, replace the battery.
This product contains a CR Coin Cell lithium Battery
which contains Perchlorate Material-special handling
may apply.
See www.dtsc.ca.gov /hazardouswaste/perch lorate
Aim the remote controller directly at the remote
sensor on the unit. Make sure there is no obstacle in
between.
• Do not install any battery other than CR2025 or its
equivalent; otherwise, it may explode.
• Store the battery in a place where children cannot
reach to avoid risk of accident.
• To prevent the battery from over-heating, cracking,
or starting a fire:
- Do not recharge, short, disassemble, heat the
battery, or dispose of it in a fire.
- Do not leave the battery with other metallic
materials.
- Do not poke the battery with tweezers or similar
tools.
- Wrap the battery with tape and insulate when
throwing away or saving it.
Continued on the next page
-
Display window
~ Status of Bluetooth device
(Device number, [1 - 5]; signal strength, [0 - 3]*1;
battery reminder, [0 - 3]*1)
[g§] Tr (track) indicator
[nJ Sub-display
~ Bluetooth indicator
lights up when a Bluetooth device is connected.
~ Playback source indicators-
CH: Lights up only when CD-CH is selected as the
playback source.
DISC: Lights up only when CD is selected as the
playback source.
@Q] Playback mode / item indicators- RND (random), •
(disc),,, (folder), RPT (repeat)
Remote controller - RM·RK50
@I] Tuner reception indicators-ST (stereo), MO
(monaural), HOLD (reception hold), HD (HD Radio™
broadcasting)
~ Sound mode (preset equalizer) indicators-ClASSIC,
HIP HOP, JAZZ, ROCK, POPS, USER
~ EQ (equalizer) indicator
~ Information indicators-TAG, Iii (folder), A (track/
file, CS II encoded HD Radio signal*2)
~ Main display
*1 As the signal/battery becomes stronger, the number
increases.
*2 KD-AHD39 only
• Installing the lithium coin battery (CR202S)
CR2025
If the range of effectiveness of the remote controller
decreases, replace the battery.
This product contains a CR Coin Cell lithium Battery
which contains Perchlorate Material-special handling
may apply.
See www.dtsc.ca.gov /hazardouswaste/perch lorate
Aim the remote controller directly at the remote
sensor on the unit. Make sure there is no obstacle in
between.
• Do not install any battery other than CR2025 or its
equivalent; otherwise, it may explode.
• Store the battery in a place where children cannot
reach to avoid risk of accident.
• To prevent the battery from over-heating, cracking,
or starting a fire:
- Do not recharge, short, disassemble, heat the
battery, or dispose of it in a fire.
- Do not leave the battery with other metallic
materials.
- Do not poke the battery with tweezers or similar
tools.
- Wrap the battery with tape and insulate when
throwing away or saving it.
Continued on the next page
-

-
IT] <!>/I/ATT (standby/on/attenuator) button
• Turns the power on if pressed briefly or attenuates
the sound when the power is on.
• Turns the power off if pressed and held.
[1] •U (up) / D (down) ~ buttons
• Changes the FM/AM bands with. U.
• Changes the preset stations with D~.
• Changes the HD Radio multicast channel numbers if
pressed and held.
• Changes the folder of the MP3IWMA discs.
• While playing an MP3 disc on an MP3-compatible
CD changer:
- Changes the disc if pressed briefly.
- Changes the folder if pressed and held.
• While listening to the satellite (SIRIUS or XM) radio:
- Changes the categories.
• While listening to an Apple iPod:
- Pauses/stops or resumes playback with D ~.
- Enters the main menu with. U. (Now. U/
DT / ..... R/F ~ work as the menu selection
buttons.)*
Q] VOL - / VOL + buttons
• Adjusts the volume level.
[!] SOUND button
• Selects the sound mode (EO mode.)
[[] SOURCE button
• Selects the source.
[]] ..... R (reverse) / F (forward) ~ buttons
• Searches for stations if pressed briefly.
• Searches for HD Radio stations if pressed and held.
• Fast-forwards or reverses the track if pressed and
held.
• Changes the tracks if pressed briefly.
• While listening to the satellite radio:
- Changes the channels if pressed briefly.
- Changes the channels rapidly if pressed and held.
• While listening to an iPod (in menu selecting
mode):
- Selects an item if pressed briefly. (Then, press
D ~ to confirm the selection.)
- Skips 10 items at a time if pressed and held.
• While listening to a Bluetooth audio player
- Reverse skip/forward skip
* • U: Returns to the previous menu.
o~: Confirms the selection.
Only lor KD-AHD39:
The unit is equipped with the OE remote control
(steering wheel remote control) function.
• See the Installation/Connection Manual (separate
volume) for connection.
-
IT] <!>/I/ATT (standby/on/attenuator) button
• Turns the power on if pressed briefly or attenuates
the sound when the power is on.
• Turns the power off if pressed and held.
[1] •U (up) / D (down) ~ buttons
• Changes the FM/AM bands with. U.
• Changes the preset stations with D~.
• Changes the HD Radio multicast channel numbers if
pressed and held.
• Changes the folder of the MP3IWMA discs.
• While playing an MP3 disc on an MP3-compatible
CD changer:
- Changes the disc if pressed briefly.
- Changes the folder if pressed and held.
• While listening to the satellite (SIRIUS or XM) radio:
- Changes the categories.
• While listening to an Apple iPod:
- Pauses/stops or resumes playback with D ~.
- Enters the main menu with. U. (Now. U/
DT / ..... R/F ~ work as the menu selection
buttons.)*
Q] VOL - / VOL + buttons
• Adjusts the volume level.
[!] SOUND button
• Selects the sound mode (EO mode.)
[[] SOURCE button
• Selects the source.
[]] ..... R (reverse) / F (forward) ~ buttons
• Searches for stations if pressed briefly.
• Searches for HD Radio stations if pressed and held.
• Fast-forwards or reverses the track if pressed and
held.
• Changes the tracks if pressed briefly.
• While listening to the satellite radio:
- Changes the channels if pressed briefly.
- Changes the channels rapidly if pressed and held.
• While listening to an iPod (in menu selecting
mode):
- Selects an item if pressed briefly. (Then, press
D ~ to confirm the selection.)
- Skips 10 items at a time if pressed and held.
• While listening to a Bluetooth audio player
- Reverse skip/forward skip
* • U: Returns to the previous menu.
o~: Confirms the selection.
Only lor KD-AHD39:
The unit is equipped with the OE remote control
(steering wheel remote control) function.
• See the Installation/Connection Manual (separate
volume) for connection.

-
ATT
Discs produce very little noise compared with other
sources. lower the volume before playing a disc to
avoid damaging the speakers by the sudden increase of
the output level.
To check the current dock time
during power off with "CLOCK DISP"
deactivated
OJ Canceling the display demonstration
Select "DEMO," then "DEMO OFF."
[1] Setting the clock
Select "CLOCK HOUR," then adjust the hour.
Select "ClOCK MIN" (minute), then adjust the
minute.
3 Finish the procedure.
SEL
To turn off the power
To drop the volume in a moment
(All)
To restore the sound, press it again.
2
• See also "General settings - PSM" on pages 17 and 18.
1 SEL
~ ..
• Adjust the sound as you want. (See pages
14-16.)
'*
-
Adjust the volume.
• For conventional FMlAM stations and HD
Radio stations
~FM1-'FM2""FM3"" AM J
• For SIRIUS radio
~SIRIUS1""SIRIUS2""SIRIUS3J
• For XM radio
~XM1"" XM2 .... XM3 J
),~, •.... FM1/FM2IFM3/AM-'
, • SIRIUS1/SIRIUS2ISIRIUS3* or
XM11XM2IXM3* -. CD* -.
CD-CH*npOD*(orEXTINPUT)-'
BT-PHONE* -. BT-AUDIO* -.
AUX IN -. (Back to the beginning)
* You cannot se/ea these sources if they are not
ready or not conneaed .
Volume level indicator
~
~~
Getting started
Basic operations
• Turn on the power.
ATT
•
• ~~
" ........
,. ~
-
ATT
Discs produce very little noise compared with other
sources. lower the volume before playing a disc to
avoid damaging the speakers by the sudden increase of
the output level.
To check the current dock time
during power off with "CLOCK DISP"
deactivated
OJ Canceling the display demonstration
Select "DEMO," then "DEMO OFF."
[1] Setting the clock
Select "CLOCK HOUR," then adjust the hour.
Select "ClOCK MIN" (minute), then adjust the
minute.
3 Finish the procedure.
SEL
To turn off the power
To drop the volume in a moment
(All)
To restore the sound, press it again.
2
• See also "General settings - PSM" on pages 17 and 18.
1 SEL
~ ..
• Adjust the sound as you want. (See pages
14-16.)
'*
-
Adjust the volume.
• For conventional FMlAM stations and HD
Radio stations
~FM1-'FM2""FM3"" AM J
• For SIRIUS radio
~SIRIUS1""SIRIUS2""SIRIUS3J
• For XM radio
~XM1"" XM2 .... XM3 J
),~, •.... FM1/FM2IFM3/AM-'
, • SIRIUS1/SIRIUS2ISIRIUS3* or
XM11XM2IXM3* -. CD* -.
CD-CH*npOD*(orEXTINPUT)-'
BT-PHONE* -. BT-AUDIO* -.
AUX IN -. (Back to the beginning)
* You cannot se/ea these sources if they are not
ready or not conneaed .
Volume level indicator
~
~~
Getting started
Basic operations
• Turn on the power.
ATT
•
• ~~
" ........
,. ~

Call Sign
To stop searching, press the same button again.
FH : ,.:; II U 7 _ H nUSiti!Ji
,"" /I ~LJ .LJ !ll
I-r
First four letters of the Call Sign Channel number
EX.: When a conventional FM broadcast is tuned
In
EX.: When an HD Radio broadcast is tuned in
Flashes first then lights up when a
digital audio broadcast is tuned in.
~--------~
FH: ,.:; II U 7 _ F" IIusst"""'U!J
""/1 ~L II
ST indicator
~
,----.. -nb-------
~ __ .. ----..::B=='5=r-=n==hA ....... , ~,aJ'
l I. UI InZ
J
I
Selected band Selected frequency
• Only for HD Radio multicast channels
• Select your desired channel.
,.. ,.
,.:- ./
i0:~-~~~~D;~
•
BAND
~~ , r:FM1~FM2~FM3J
,.,- ...... AM ....... f---
", .
The selected band appears on the sub-display.
• Start searching for a station.
You can tune in to both conventional and HO Radio
broadcasts.
• If you want to search for HO Radio stations only, see "To
search for HO Radio stations only-HO Search" on page
9.
What Is HD Radlo·'broadcastingl . ,
HO Radio stations can deliver high-quality digital "
sound-'
',' AM digital will ha.ve fM,~like sQund quality (in
stereo) and FM digi~1 will have CD:like S04,n9qu~I~~,;,
with staticjfre~,~nd~le~r rtception.Furth~rOlqre,··; ,,'
stations can offerte "andd~ta, su ames
'and S()n9titl~s;, "y\ ,Y;' ,.
• HORadi?tuners, n alsotllnelnto con I,:
analog broadcasts.", , '" .... ';;,>, ",j,
• Many HD Radio stations offer moretha,o ()~e~hannel.:;
of programming~ Thisse'rvi.(e is calledT41!icasting,
.' T oJin~ ijO Radio stations In your area, visit;<http:LI
www.hdradio~com/>.'· . ,.. .}~ '.' ;
Radio operations
,"
,,
,,
,"
To tune in to broadcasts manually-
Manual Search
-
When a station is tuned in, searching stops.
• The ST indicator lights up when the unit receives
a stereo signal.
• Only for KO-AHD39:
The A indicator lights up when the unit receives
an HD Radio signal encoded with CS II (SRS Circle
Surround 11
1M
).
When an HD Radio broadcast is tuned In ...
Analog signals are received first for a few seconds
before digital signals.
Before starting Manual Search, select "MANUAL" for
"SEARCH MODE" (see page 18).
In step. on the left ...
IT]
,"
,,
,,
, -.
,
,
FM I ---4\ & , USER ti!I
" '", ,.11 ~ L12Sn,.IIU
:, I::::;:], . UI Inz
Call Sign
To stop searching, press the same button again.
FH : ,.:; II U 7 _ H nUSiti!Ji
,"" /I ~LJ .LJ !ll
I-r
First four letters of the Call Sign Channel number
EX.: When a conventional FM broadcast is tuned
In
EX.: When an HD Radio broadcast is tuned in
Flashes first then lights up when a
digital audio broadcast is tuned in.
~--------~
FH: ,.:; II U 7 _ F" IIusst"""'U!J
""/1 ~L II
ST indicator
~
,----.. -nb-------
~ __ .. ----..::B=='5=r-=n==hA ....... , ~,aJ'
l I. UI InZ
J
I
Selected band Selected frequency
• Only for HD Radio multicast channels
• Select your desired channel.
,.. ,.
,.:- ./
i0:~-~~~~D;~
•
BAND
~~ , r:FM1~FM2~FM3J
,.,- ...... AM ....... f---
", .
The selected band appears on the sub-display.
• Start searching for a station.
You can tune in to both conventional and HO Radio
broadcasts.
• If you want to search for HO Radio stations only, see "To
search for HO Radio stations only-HO Search" on page
9.
What Is HD Radlo·'broadcastingl . ,
HO Radio stations can deliver high-quality digital "
sound-'
',' AM digital will ha.ve fM,~like sQund quality (in
stereo) and FM digi~1 will have CD:like S04,n9qu~I~~,;,
with staticjfre~,~nd~le~r rtception.Furth~rOlqre,··; ,,'
stations can offerte "andd~ta, su ames
'and S()n9titl~s;, "y\ ,Y;' ,.
• HORadi?tuners, n alsotllnelnto con I,:
analog broadcasts.", , '" .... ';;,>, ",j,
• Many HD Radio stations offer moretha,o ()~e~hannel.:;
of programming~ Thisse'rvi.(e is calledT41!icasting,
.' T oJin~ ijO Radio stations In your area, visit;<http:LI
www.hdradio~com/>.'· . ,.. .}~ '.' ;
Radio operations
,"
,,
,,
,"
To tune in to broadcasts manually-
Manual Search
-
When a station is tuned in, searching stops.
• The ST indicator lights up when the unit receives
a stereo signal.
• Only for KO-AHD39:
The A indicator lights up when the unit receives
an HD Radio signal encoded with CS II (SRS Circle
Surround 11
1M
).
When an HD Radio broadcast is tuned In ...
Analog signals are received first for a few seconds
before digital signals.
Before starting Manual Search, select "MANUAL" for
"SEARCH MODE" (see page 18).
In step. on the left ...
IT]
,"
,,
,,
, -.
,
,
FM I ---4\ & , USER ti!I
" '", ,.11 ~ L12Sn,.IIU
:, I::::;:], . UI Inz

While listening to an HD Radio station •••
1MODE
~
AUTO --. DIGITAL ]
'----- ANALOG -.1Il----
10 HOLD
2
To change the HD Radio reception mode
While tuning in to an HD Radio broadcast, the received
signals may alternate between digital and analog due to
the receiving conditions.
If you want to cancel this function, follow the procedure
below.
.-, ~
." ,
., I
•'M
. // \..
Before starting HD Search, select "HD SEEK" for
"SEARCH MODE" (see page 18).
To search for HD Radio stations only-HD
Search
• When you press the M MODE button in step. on page
8, you can use HD Search (see below) temporarily by
pressing the ~ v /~ A buttons even though
"MANUAL" is selected for "SEARCH MODE."
[I] Select the desired station frequency.
In step. on page 8 ...
HOLD indicator
---------gHOLO-IlS---
F f1 I ---,#.~---- nUSER UJi
a9/uf1H
z
When an FM stereo broadcast is hard to
receive
Lights up when the monaural mode is activated.
---------(~o)~--~
4' USER'U:I
IIJ1nll/n
I IU/IiU
ANALOG: For playing analog audio only. HOLD
indicator lights up.
AUTO: For automatic switching between digital
and analog audio.
DIGITAL: For playing digital audio only. HOLD
indicator lights up.
•If no sound comes out with current setting, change the
setting to "ANALOG" or "DIGITAl."
• The setting automatically returns to "AUTO" in the
following cases:
- When you tune in to another broadcast.
- When you change to another source.
- When you turn off the power.
• This setting does not affect the conventional FM/ AM
stations.
• Ifthe radio station forces the reception mode to digital,
the HOLD indicator flashes.
USERti!I
8 MO
MODE
r LLt.-:'
r :!H- 77"':
,.,.. J) ......
When an HD Radio station is tuned in, searching stops.
• When you press the M MODE button in step. on page
8, you can use Manual Search (see page 8) temporarily by
pressing the ~ v /~ A buttons even though
"HD SEARCH" is selected for "SEARCH MODE."
Reception improves, but the stereo effect will be lost.
To restore the stereo effect, repeat the same procedure.
"MONO OFF" appears and the MO indicator goes off.
-
While listening to an HD Radio station •••
1MODE
~
AUTO --. DIGITAL ]
'----- ANALOG -.1Il----
10 HOLD
2
To change the HD Radio reception mode
While tuning in to an HD Radio broadcast, the received
signals may alternate between digital and analog due to
the receiving conditions.
If you want to cancel this function, follow the procedure
below.
.-, ~
." ,
., I
•'M
. // \..
Before starting HD Search, select "HD SEEK" for
"SEARCH MODE" (see page 18).
To search for HD Radio stations only-HD
Search
• When you press the M MODE button in step. on page
8, you can use HD Search (see below) temporarily by
pressing the ~ v /~ A buttons even though
"MANUAL" is selected for "SEARCH MODE."
[I] Select the desired station frequency.
In step. on page 8 ...
HOLD indicator
---------gHOLO-IlS---
F f1 I ---,#.~---- nUSER UJi
a9/uf1H
z
When an FM stereo broadcast is hard to
receive
Lights up when the monaural mode is activated.
---------(~o)~--~
4' USER'U:I
IIJ1nll/n
I IU/IiU
ANALOG: For playing analog audio only. HOLD
indicator lights up.
AUTO: For automatic switching between digital
and analog audio.
DIGITAL: For playing digital audio only. HOLD
indicator lights up.
•If no sound comes out with current setting, change the
setting to "ANALOG" or "DIGITAl."
• The setting automatically returns to "AUTO" in the
following cases:
- When you tune in to another broadcast.
- When you change to another source.
- When you turn off the power.
• This setting does not affect the conventional FM/ AM
stations.
• Ifthe radio station forces the reception mode to digital,
the HOLD indicator flashes.
USERti!I
8 MO
MODE
r LLt.-:'
r :!H- 77"':
,.,.. J) ......
When an HD Radio station is tuned in, searching stops.
• When you press the M MODE button in step. on page
8, you can use Manual Search (see page 8) temporarily by
pressing the ~ v /~ A buttons even though
"HD SEARCH" is selected for "SEARCH MODE."
Reception improves, but the stereo effect will be lost.
To restore the stereo effect, repeat the same procedure.
"MONO OFF" appears and the MO indicator goes off.
-

You can preset six stations for each band.
• The HD Radio multicast channels can also be preset.
• Station automatic presetting-SSM
(Strong-station Sequential Memory)
1 Select the band you want to store in.
BAND
~~ . rFM1 .... FM2 FM3]
" " AM --
", :.
2 MODE
39 SSM
~cn-.-.-i-
"55
1111
~
:. I I :
-!' ,,, ,-,-'.-
"SSM" flashes, then disappears when automatic
presetting is over.
local stations with the strongest signals are searched for
and stored automatically in the selected band.
• HD Radio stations are preferentially stored.
• Manual presetting
1 Tune in to the station or channel you want
to preset (see pages 8 and 9).
2 Press and hold a number button (1 - 6) to
select a preset number.
Ex.: Storing channel number 2 of an HD Radio
broadcast into preset number 4 of the FMl
band.
10 HOLD
F~~pjJ'-I~/I"U-' -H
n3
.; ,IIIIII~L .uC
The preset number flashes for a while.
1 BAND
~~ r:FM1 .... FM2 FM3]
" " AM --
", .
2 Select the preset station (1 - 6) you want.
• "LINKING" appears while linking to an HD Radio
multicast channel.
I{it~ Clock - CaIlSign*' J
DISP •• ~ Text*3 ~ PTY*2 ~ Frequency
...
Clock: Shows the clock.
Call Sign*': Shows the Call Sign ofthe HD Radio broadcast
tuned in.
Frequency: Shows the station frequency.
PTY*2: Shows the genre of the HD Radio program
tuned in (Program Type).
Text*3: Shows the Title/Artist/Album name ofthe
current segment.
• Station frequency appears for a while ...
- When you change the frequency.
- When you change the band.
*1 No information appears when a Call Sign is not received.
*1 When no program type (PTY) is received, "HD RADIO"
appears for HD Radio broadcasting, and ''ANALOG'' appears
roranarogbroadcasffn~
*3 "NO TEXT" appears when no text is received
You can preset six stations for each band.
• The HD Radio multicast channels can also be preset.
• Station automatic presetting-SSM
(Strong-station Sequential Memory)
1 Select the band you want to store in.
BAND
~~ . rFM1 .... FM2 FM3]
" " AM --
", :.
2 MODE
39 SSM
~cn-.-.-i-
"55
1111
~
:. I I :
-!' ,,, ,-,-'.-
"SSM" flashes, then disappears when automatic
presetting is over.
local stations with the strongest signals are searched for
and stored automatically in the selected band.
• HD Radio stations are preferentially stored.
• Manual presetting
1 Tune in to the station or channel you want
to preset (see pages 8 and 9).
2 Press and hold a number button (1 - 6) to
select a preset number.
Ex.: Storing channel number 2 of an HD Radio
broadcast into preset number 4 of the FMl
band.
10 HOLD
F~~pjJ'-I~/I"U-' -H
n3
.; ,IIIIII~L .uC
The preset number flashes for a while.
1 BAND
~~ r:FM1 .... FM2 FM3]
" " AM --
", .
2 Select the preset station (1 - 6) you want.
• "LINKING" appears while linking to an HD Radio
multicast channel.
I{it~ Clock - CaIlSign*' J
DISP •• ~ Text*3 ~ PTY*2 ~ Frequency
...
Clock: Shows the clock.
Call Sign*': Shows the Call Sign ofthe HD Radio broadcast
tuned in.
Frequency: Shows the station frequency.
PTY*2: Shows the genre of the HD Radio program
tuned in (Program Type).
Text*3: Shows the Title/Artist/Album name ofthe
current segment.
• Station frequency appears for a while ...
- When you change the frequency.
- When you change the band.
*1 No information appears when a Call Sign is not received.
*1 When no program type (PTY) is received, "HD RADIO"
appears for HD Radio broadcasting, and ''ANALOG'' appears
roranarogbroadcasffn~
*3 "NO TEXT" appears when no text is received