JVC DR-M10SEF User manual

SERVICE MANUAL
COPYRIGHT © 2004 VICTOR COMPANY OF JAPAN, LIMITED No.XA020
2004/4
DVD VIDEO RECORDER
XA02020043DR-M10SEF, DR-M10SEK
DR-M10SE, DR-M10SER
DR-M10BE
TABLE OF CONTENTS
1 PRECAUTION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3
2 SPECIFIC SERVICE INSTRUCTIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5
3 DISASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6
4 ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-9
5 TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-10
CABLE/DBS
DVDTV
DVD
CH
TIMER REC LINK PROG/CHECK VCR Plus+
NEXTPREVIOUS
PAUSEREC
REC MODE LIVE CHECK
SET UP DISPLAY ON SCREEN
OPEN/
CLOSE
AUDIO SUBTITLE ANGLE
PROGRESSIVE
SCAN
SLOWSLOW PLAY/SELECT
STOP/
CLEAR
NAVIGATIONTOP MENU
RETURN
ENTER
MENU
TV/CBL/DBS
STANDBY/ON
TV
MUTING TV/ VIDEO
TV VOLUME
ABC
JKLGHI MNO
TUVPQRS WXYZ
AUXCANCEL MEMO/MARK
DBS
DEF
Area Suffix
EK ------------------------ U.K.
EF --------------------- France
ER ---- Russian Federation
E ------- Continental Europe
Northern Europe
Since the whole mechanism assembly unit is replaced, the DVD recorder
mechanism of this unit need not be adjusted.
STANDBY/ON
S-VIDEO VIDEO
L(MONO) - AUDIO - R
DV DV IN
F1
REC MODE
PULL - OPEN
SAT

1-2 (No.XA020)
SPECIFICATION
Specifications shown are for SP mode unless otherwise specified.
E.& O.E. Design and specifications subject to change without notice.
GENERAL Power requirement AC 220 V - 240 Vd, 50 Hz/60 Hz
Power consumption Power on : 33 W
Power off : 17.6 W
Temperature Operating : 5°C to 40°C
Storage : -20°C to 60°C
Operating position Horizontal only
Dimensions (W ×H ×D) 435 mm ×70 mm ×346 mm
Weight 4.5 kg
VIDEO/AUDIO Recordable disc DVD-RAM 12 cm : (4.7 GB/9.4 GB)
DVD-RAM 8 cm : (1.4 GB/2.8 GB)
DVD-R 12 cm:( 4.7 GB, 8 cm: 1.4 GB for General Ver. 2.0)
DVD-RW 4.7 GB for Ver. 1.0/1.1
Recording format DVD-RAM DVD Video Recording format
DVD-R DVD-Video format
DVD-RW DVD-Video format, DVD Video Recording format
Recording time Maximum 8 hours (with 4.7 GB disc)
(XP) : Approx. 1 hour, (SP) : Approx. 2 hours, (LP) : Approx. 4 hours, (EP) : Approx. 6 hours, (FR) :
Approx. 1 hour - 8 hours
Playable disc DVD-RAM 12 cm : (4.7 GB/9.4 GB)
DVD-RAM 8 cm : (1.4 GB/2.8 GB)
DVD-R 12 cm:( 4.7 GB, 8 cm: 1.4 GB for General Ver. 2.0)
DVD VIDEO, DVD-RW 4.7 GB
Music CD (CD-DA)
Video CD
CD-R/RW (CD-DA, Video CD/SVCD formatted discs)
Audio recording system Dolby Digital (2 ch)
Linear PCM (XP mode only)
Video recording compression system MPEG2 (CBR/VBR)
Input/Output S-video input Y : 0.8 - 1.2 Vp-p, 75 Ω
C : 0.2 - 0.4 Vp-p, 75 Ω
S-video output Y : 1.0 Vp-p, 75 Ω
C : 0.3 Vp-p, 75 Ω
Video input 0.5 - 2.0 Vp-p, 75 Ω(pin jack)
Video output 1.0 Vp-p, 75 Ω(pin jack)
Audio input -8 dB, 50 kΩ(pin jack) Corresponding to mono (left)
Audio output -8 dB, 1 kΩ(pin jack)
i.Link 4-pin for DV input
Component video output Y : 1.0 Vp-p, 75 Ω
PB/PR : 0.7 Vp-p, 75 Ω
Corresponding to copy protection
Optical -18 dBm, 660 nm
Coaxial 0.5Vp-p,75ohms Corresponding to Dolby Digital and DTS Digital Surround
Bit stream
Selectable in digital audio output setting menu
TUNER/TIMER Signal system PAL-type colour signal and CCIR monochrome signal, 625 lines 50 fields
TV channel storage capacity 99 positions (+AUX position)
Tuning system Frequency synthesized tuner
Channel coverage VHF 47 MHz - 89 MHz/104 MHz - 300 MHz/302MHz-470MHz
UHF 470 MHz - 862 MHz
Memory backup time Approx. 60 min.
ACCESSORIESProvided accessories RF cable, 21-pin SCART cable, Satellite Controller, Infrared remote control unit, "R6" battery ×2

1-4 (No.XA020)
1.5 Important for laser products
1.CLASS 1 LASER PRODUCT
2.DANGER : Invisible laser radiation when open and inter
lock failed or defeated. Avoid direct exposure to beam.
3.CAUTION : There are no serviceable parts inside the
Laser Unit. Do not disassemble the Laser Unit. Replace
the complete Laser Unit if it malfunctions.
4.CAUTION : The CD,MD and DVD player uses invisible
laser radiation and is equipped with safety switches which
prevent emission of radiation when the drawer is open and
the safety interlocks have failed or are defeated. It is
dangerous to defeat the safety switches.
5.CAUTION : If safety switches malfunction, the laser is able
to function.
6.CAUTION : Use of controls, adjustments or performance of
procedures other than those specified here in may result in
hazardous radiation exposure.
!
Please use enough caution not to
see the beam directly or touch it
in case of an adjustment or operation
check.
REPRODUCTION AND POSITION OF LABEL and PRINT
WARNING LABEL and PRINT
On mechaism assembly

1-6 (No.XA020)
SECTION 3
DISASSEMBLY
3.1 Main body section
3.1.1 Remove the top cover (See figure 1)
(1) Remove the four screws Aattaching the top cover on both
sides of the main body.
(2) Remove the five screws Battaching the top cover on the
back of the main body.
(3) Raise the both sides and lower part of the rear of the top
cover, with opening them slightly in an outward direction.
And the top cover will be removed.
Fig.1
3.1.2 Remove the front panel assembly (See figure 2, figure 3, and figure 4)
• Prior to performing the following procedure, remove the top
cover.
• There is no need to remove the mechanism assembly.
(1) Disconnect the card wires from connector CN3001,
CN3002, CN4001 on the main board.
(2) Hooks aand bare removed respectively, and the front
panel assembly is removed.
NOTE:
In case of attach a front panel assembly, please let a
card wire pass in the hole in the front part of a chassis,
respectively, and connect.
Fig.2
Fig.3
Fig.4
B
B
Ax 2
TOP COVER
TOP COVER
TOP COVER
B
Ax 2
B
B
CN3002CN4001 CN3001
Main board
Hook a
Hook a
Hook b
Hook b
Front panel
assembly
Front panel
assembly
Card wireCard wire
Chassis of front part
Card wire

(No.XA020)1-7
3.1.3 Remove the mechanism assembly (See figure 5)
• Prior to performing the following procedure, remove the top
cover.
• There is no need to remove the front panel assembly.
(1) Disconnect the socket wire from connector CN5303 on the
power supply board.
(2) Disconnect the card wire from connector CN2201 on the
module board.
(3) Remove the four screws Cattaching the mechanism as-
sembly.
Fig.5
3.1.4 Remove the module board (See figure 6, figure 7)
• Prior to performing the following procedure, remove the top
cover.
(1) Disconnect the card wire from connector CN2201 on the
module board.
(2) Remove the four screws Dand Eattaching the module
board.
(3) Remove the one screw Fattaching the DV terminal board.
(4) Lift the module board up, and remove it. Then, the module
board is removed from the connectors CN4101, CN4102
on the main board. In attaching the module board, insert
the connector on the module board in these connectors se-
curely.
Fig.6
Fig.7
C
Mechanism assembly
C
CN2201 C C CN5303
Module board
EF
D
D
CN2201
EModule board
DV terminal
board
Module board
Main boardCN4101
CN4102

1-8 (No.XA020)
3.1.5 Remove the power supply board (See figure 8)
• Prior to performing the following procedure, remove the top
cover.
(1) Disconnect the card wire from connector CN5301 on the
power supply board.
(2) Disconnect the socket wire from connector CN5302,
CN5303, CN5305 on the power supply board.
(3) Disconnect the power cord from connector CN5001 on the
power supply board.
(4) Remove the two screws Gattaching the power supply
board.
(5) Four fasteners are removed.
Fig.8
3.1.6 Remove the main board (See figure 9, figure 10)
• Prior to performing the following procedure, remove the top
cover, mechanism assembly, module board.
(1) Disconnect the card wire from connector CN3001,
CN3002, CN4001, CN5101, CN7301 on the main board
(2) Disconnect the socket wire from connector CN5302 on the
power supply board.
(3) Remove the two screws Hattaching the main board.
(4) Remove the seven screws Iattaching the rear panel with
main board.
Fig.9
Fig.10
Power supply
board
CN5001
CN5305 G
G
CN5303
Power cord
Fastener
Fastener
CN5301
Fastener
CN5302
Power supply board
CN5302CN3001H
CN5101
CN3002CN4001
Main board
H CN7301
I
Rear panel

(No.XA020)1-9
SECTION 4
ADJUSTMENT
4.1 Timer clock adjustment (for only ver.E)
If an error comes to arise for a clock, the following procedure will adjust.
(1) Connect the frequency counter to the measuring point (D1).
(2) Connect the short wire between the short point (D2) and Vcc (5V).
(3) Short the leads of capacitor (D3) once in order to reset the microprocessor of the system controller.
(4) Disconnect the short wire between the short point (D2) and Vcc then connect it again.
(5) Adjust the Adjustment part (F) so that the output frequency becomes the specified value (G).
Signal (A1) No signal
Mode (B) EE
Equipment (C) Frequency counter
Measuring point (D1)
(D2)
(D3)
IC3001 pin 61
IC3001 pin 17
C3026 + and -
Adjustment part (F) C3025 (TIMER CLOCK)
Specified value (G1) 1024.008 ±0.001 Hz
(976.5549 ±0.0010 usec)

1-10 (No.XA020)
SECTION 5
TROUBLESHOOTING
5.1 JIG Mode
The following remote control units are required to set and cancel JIG mode.
For setting : a remote control unit attached to product.
For cancellation : JIG remote control unit (part number : PTU94023B)
When the main body is set to JIG mode and when the main body is under JIG mode, the remote control unit attached to product op-
erates only in "Remote Control Code 1". Since main body is in "Remote Control Code 3" when it is shipped and just after its batteries
are changed, "Remote Control Code 3" needs to be changed to "Remote Control Code 1."
< Changing Remote Control Code >
(1) Switch TV/CABLE/DBS/DVD Switch to "DVD"
(2) Press the numeric button "1" of the remote control unit while pressing the "SET UP" button of the remote control unit. Then,
press the "ENTER" button, and then release the "SET UP" button.
(3) Press the "PLAY" button of the main body for five seconds or longer while the main body is in stand-by mode, and a current
remote control code of the main body is displayed in FL indicator of the main body.
(4) While keeping the state of (3), press the "STOP" button of the remote control unit toward the main body.
(5) When FL indicator displays "DVD1," it means that the Remote Control Code has been changed to "1."
Custom code
43:A Code
53:B Code
6F:C Code
7F:D Code
Data code
Initial mode
Remote control unit
attached to product JIG remote control unit
3
JIG remote control unit
[Data transmission]
Set the data code,
and then press the
" " button.
CABLE/DBS
DVDTV
DVD
CH
TIMER REC LINK PROG/CHECK VCR Plus+
NEXTPREVIOUS
PAUSEREC
REC MODE LIVE CHECK
SET UP DISPLAY ON SCREEN
OPEN/
CLOSE
AUDIO SUBTITLE ANGLE
PROGRESSIVE
SCAN
SLOWSLOW PLAY/SELECT
STOP/
CLEAR
NAVIGATIONTOPMENU
RETURN
ENTER
MENU
TV/CBL/DBS
STANDBY/ON
TV
MUTING TV/ VIDEO
TVVOLUME
ABC
JKLGHI MNO
TUVPQRS WXYZ
AUXCANCEL MEMO/MARK
DBS
DEF
CABLE/DBS
DVDTV
DVD
CH
TIMER REC LINK PROG/CHECK VCR Plus+
NEXTPREVIOUS
PAUSEREC
REC MODE LIVE CHECK
SET UP DISPLAY ON SCREEN
OPEN/
CLOSE
AUDIO SUBTITLE ANGLE
PROGRESSIVE
SCAN
SLOWSLOW PLAY/SELECT
STOP/
CLEAR
NAVIGATIONTOP MENU
RETURN
ENTER
MENU
TV/CBL/DBS
STANDBY/ON
TV
MUTING TV/ VIDEO
TV VOLUME
ABC
JKLGHI MNO
TUVPQRS WXYZ
AUXCANCEL MEMO/MARK
DBS
DEF
STANDBY/ON
S-VIDEO VIDEO
L(MONO) - AUDIO - R
DV DV IN
F1
REC MODE
PULL - OPEN
SAT
(1)
(2)b
(2)c
(2)a
(4)
(3)
(3),(5)
"(2) a-c" shows the order of pressing the buttons.
DVD 1
*This product has remote control codes of 1, 2, 3, and 4.
*The remote control codes "DVD 1, 2, 3, and 4" of product are the same as the remote control codes
"A, B, C, and D" of video cassette recorders manufactured in JVC.

(No.XA020)1-11
5.1.1 Setting JIG mode
To display SYSTEM INFO or to upgrade firmware, the main body needs to be set to JIG mode.
(1) Turn the main body ON.
(2) Press the buttons of the remote control unit attached to product in the following order : "SET UP" →"2" →"8" →"ENTER"
(3) When a colon ":" between "hour" and "minute" of a clock in FL indicator blink, it means that the main body has been set to JIG
mode properly.
(4) Turn the main body OFF, and then turn it ON again.
*Once the main body is set to JIG mode, the JIG mode cannot be cancelled even if the power cord is pulled out from the wall
socket.
5.1.2 Canceling JIG mode
(1) Transmit "43-9D" to the main body by using JIG remote control unit.
(2) A colon ":" between "hour" and "minute" of a clock in FL indicator light.
(3) Turn the main body OFF, and then turn it ON again.
NOTE:
After repair work, be sure to cancel JIG mode. Before returning product to a user, confirm that a colon ":" between "hour" and
"minute" of a clock in FL indicator light.
Not in JIG mode In JIG mode
[ Example ]
15 : 07 15 07
A colon blinks.
CABLE/DBS
DVDTV
DVD
CH
TIMER REC LINK PROG/CHECK VCR Plus+
NEXTPREVIOUS
PAUSEREC
REC MODE LIVE CHECK
SET UP DISPLAY ON SCREEN
OPEN/
CLOSE
AUDIO SUBTITLE ANGLE
PROGRESSIVE
SCAN
SLOWSLOW PLAY/SELECT
STOP/
CLEAR
NAVIGATIONTOP MENU
RETURN
ENTER
MENU
TV/CBL/DBS
STANDBY/ON
TV
MUTING TV/ VIDEO
TV VOLUME
ABC
JKLGHI MNO
TUVPQRS WXYZ
AUXCANCEL MEMO/MARK
DBS
DEF
STANDBY/ON
S-VIDEO VIDEO
L(MONO) - AUDI O - R
DV DV IN
F1
REC MODE
PULL - OPEN
SAT
(2)b
(2)c
(2)d
(2)a
(3)
(1),(4)
"(2) a-d" shows the order of pressing the buttons.
15:07

1-12 (No.XA020)
5.1.3 Displaying SYSTEM INFO
SYSTEM INFO contains information on firmware version of the main body and the mechanism drive, and an initialize execution menu.
(1) Set the main body to JIG mode.
(2) Transmit "43-8B" to the main body by using JIG remote control unit.
(3) SYSTEM INFO menu is displayed in the television screen.
(4) To move cursor in SYSTEM INFO, use the "", "", "", and "" buttons of a remote control unit attached to product.
NOTE :
Items other than the ones described above are not used in service work.
(5) To quit the SYSTEM INFO menu, transmit "43-8B" to the main body by using JIG remote control unit.
(6) Cancel JIG mode.
5.1.4 Upgrading firmware of the main body
• Firmware upgrade disk supports CD-R media.
(1) Download a compressed file of the latest firmware in "optical disc" page in JS-NET.
(2) Decompress the file, and a file "fwupdate.bin" is generated.
(3) Write "fwupdate.bin" in CD-R in ISO9660 format.(Don’t use Packet Write software. Write in UDF format.)
(4) Set the main body to JIG mode.
(5) Transmit "43-70" to the main body by using JIG remote control unit.
(6) "UPDATE" appears in FL indicator. Load disk for upgrade on the tray, and close the tray.
(7) Upgrade processing is started automatically.
(8) Then, "FW UPDATE" appears in FL indicator. It takes approx. 6 minutes at maximum to upgrade firmware.
(9) The tray is ejected. Then, take out the disk and close the tray.
(10) Turn the main body OFF, and pull out the power cord from the wall socket. Then, plug the power cord into the wall socket.
(11) "LOADING" of FL indicator disappears. Then, turn the main body ON.
(12) Display the SYSTEM INFO menu, and check the version of the firmware.
(13) Cancel JIG mode.
ATTENTION :
Firmware may sometimes not be upgraded successfully.
If firmware is not upgraded successfully, the tray opens, and "ERROR" appears in FL indicator.
If firmware is upgraded successfully, the tray opens, and "OPEN" appears in FL indicator.
If the power cord is pulled out from the wall socket while "ERROR" appears, data in the flash memory is destroyed and the main
body cannot start: the flash memory needs to be replaced.
After upgrading procedure, pay enough attention to FL indicator when the tray opens.
When "ERROR" appears, upgrade firmware again in the following way to restore the firmware.
(1) Transmit "43-70" to the main body by using JIG remote control unit while the tray opens.
(2) When "UPDATE" appears in FL indicator, close the tray and make the main body read the disk. Upgrading starts.
(3) After (2), perform upgrading procedure (4) - (10) of 5.1.4 Upgrading firmware of the main body above.
< VERSION >
ENTER
SELECT
EXIT SELECT WITH [CURSORS]
THEN PRESS [ENTER]
SET UP
SYSTEM INFO
VERSION INITIALIZE INFORMATION
CPRM Key Download
C-Ware / A-Ware
JVRI / Host
1394 / OSD
Analog / BE-R / FE-R
Done
PROD98-2 / JVC_43
0076 / V0108
0053E / MTEN03
003 / 2 / 2
Version of firmware
This part is updated after the firmware of the
main body is upgraded.
System controller version
/ Region code (Backend) / Region code (Frontend)

(No.XA020)1-13
5.2 The setting method of a region code
A region code should be set after a DVD recorder mechanism unit is replaced.
While a DVD recorder mechanism unit is in a warehouse as a stock, a region code of the drive unit is not determined.
Only replacement of a DVD recorder mechanism unit may cause abnormal playback of Disc.
Set a region code of a DVD recorder mechanism unit in the following procedure.
(1) Replace a DVD recorder mechanism unit.
(2) Turn POWER switch of the unit ON.
(3) Set the main body to JIG mode.
(4) Insert a DVD-RAM disc in the unit to make the unit read the DVD-RAM disc.(The DVD-RAM disk used in this procedure is not a
disk for upgrade. If it is a DVD-RAM disk, it is good anything.)
(5) Send "43-F2" to the unit by using JIG remote control unit.
(6) "REGION 2" is displayed on FL display.
(7) Set the unit to STANDBY.
(8) Turn the POWER switch ON.
(9) To cancel JIG MODE, send "43-9D" to the unit by using JIG remote control unit.
(10) Colon is displayed on a clock on FL display.
(11) Setting is completed in the procedure above.
5.3 Taking out a disc
5.3.1 Method 1
(1) AC Plug is pulled out at once and inserted again.
(2) It is displayed on FL display as "LOADING", and while it blinks, pushing the EJECT button of a main body is continued.
(3) After a while, a tray opens (About 20 seconds).
(4) A disk is removed, the EJECT button of a main body is pushed, and a tray is made to close.
(5) The "LOADING" blink display of FL display disappears and it will be in a standby state.
(6) If the POWER button is pushed, it will usually be operating.
5.3.2 Method 2
When a disk is not able to be taken out by operation of "Method 1", a front door is opened manually, and the EJECT button in the lower
right of a DVD recorder mechanism is pushed directly.
5.3.3 Method 3
A Disc can be taken out manually even when the main body is turned off.
(1) Open the front door.
(2) Pass a thin wire through a hole in the DVD recorder mechanism unit.
(3) The disc tray comes out slightly. Take out the disc tray manually.
5.4 The exchange method of a tray fitting
When DVD recorder mechanism unit is exchanged, please transplant a tray fitting from an old drive, or change for a new tray fitting.
A tray is pulled out manually, as shown in a figure, it carries out, and a tray fitting is removed.
DVD recorder mechanism unit
Front door Hole
Disc tray Direct EJECT button
Tray fitting
Tray DVD recorder mechanism unit

(No.XA020)
AV & MULTIMEDIA COMPANY OPTICAL DISC CATEGORY 1644, Shimotsuruma, Yamato, Kanagawa 242-8514, Japan
VICTOR COMPANY OF JAPAN, LIMITED
WPC
Printed in Japan

SCHEMATIC DIAGRAMS
DVD VIDEO RECORDER
No.XA020SCH
2004/04
COPYRIGHT 2004 VICTOR COMPANY OF JAPAN, LIMITED.
DR-M10SEF, DR-M10SEK
DR-M10SE, DR-M10SER
DR-M10BE
CD-ROM No.SML200404
Contents
Safety precaution ------------------------ 2-2
Wiring diagram --------------------------- 2-3
Block diagrams --------------------------- 2-4
Standard schematic diagrams -------- 2-7
Printed circuit boards -------------------- 2-21
CABLE/DBS
DVDTV
DVD
CH
TIMER REC LINK PROG/CHECK VCR Plus+
NEXTPREVIOUS
PAUSEREC
REC MODE LIVE CHECK
SET UP DISPLAY ON SCREEN
OPEN/
CLOSE
AUDIO SUBTITLE ANGLE
PROGRESSIVE
SCAN
SLOWSLOW PLAY/SELECT
STOP/
CLEAR
NAVIGATIONTOP MENU
RETURN
ENTER
MENU
TV/CBL/DBS
STANDBY/ON
TV
MUTING TV/ VIDEO
TV VOLUME
ABC
JKLGHI MNO
TUVPQRS WXYZ
AUXCANCEL MEMO/MARK
DBS
DEF
Area Suffix
EK ------------------------ U.K.
EF --------------------- France
ER ---- Russian Federation
E ------- Continental Europe
Northern Europe
Since the whole mechanism assembly unit is replaced, the DVD recorder
mechanism of this unit need not be adjusted.
STANDBY/ON
S-VIDEO VIDEO
L(MONO) - AUDIO - R
DV DV IN
F1
REC MODE
PULL - OPEN
SAT

(No.XA020SCH) 2-3
CN6901
CN7101
CN1901
CN3002
CN5102
CN1402
CN7301
CN2101
CN4102 CN4101
CN5305 CN5001
CN5306
CN4104
CN1401
CN7312
CN1202
AUDIO_IN
CH_SW
MOD_B[SW5V]
CONV.CTL[H]
VIDEO_IN
[RF_AGC]
AS
SCL
SDA
MB[SW5V]
TU[30V]
AUDIO_OUT
AFT
VIDEO_OUT
NC[OPEN]
BB[AL5V]
AUDIO_IN
MOD_SDA
MOD_B[AL5V]
MOD_SCL
VIDEO_IN
RF_AGC
AS
SCL
SDA
NC
MB[SW5V]
LOCK[L]
TU[30V]
SW1
SW2
AUDIO_OUT
SIF_OUT
AFT
VIDEO_OUT
JLIP_RX
GND
JLIP_TX
D3.3V
RSTSTA
GND GND GND GND GND GND GND
DASP- CS3FX CS1FX
ATA_A2 ATA_A0 PDIAG- ATA_A1
IOCSI6- INI_ATA
DMACK
CAB_SEL
IORDY
DIOR DIOW
DMARQ
KEY
HD_AT[7] HD_AT[8] HD_AT[6] HD_AT[9] HD_AT[5]
HD_AT[10] HA_AT[14]
HD_AT[4]
HD_AT[11]
HD_AT[3]
HD_AT[12]
HD_AT[2]
HD_AT[13]
HD_AT[0] HD_AT[1]
HD_AT[15]
FAN8V
GND
BLU BRN
GND GND D1.8V D1.8V D2.5V D3.3V
RSTSTA
GND GND GND GND GND GND GND
DASP- CS3FX CS1FX
ATA_A2 ATA_A0 PDIAG- ATA_A1
IOCSI6- INI_ATA
DMACK
CAB_SEL
IORDY
DIOR DIOW
DMARQ
KEY
HD_AT[7] HD_AT[8] HD_AT[6] HD_AT[9] HD_AT[5]
HD_AT[10] HA_AT[14]
HD_AT[4]
HD_AT[11]
HD_AT[3]
HD_AT[12]
HD_AT[2]
HD_AT[13]
HD_AT[0] HD_AT[1]
HD_AT[15]
Wiring diagram
S/RCA OUT

2-4 (No.XA020SCH)
DDR_DQ0 to 15
DDR SDRAM
IC1602
DDR SDRAM section (SHEET 3)
IEEE1394 section (SHEET 2)
IEEE1394
terminal
IEEE1394
controller
IC1801
TPA+ TPA- TPB+ TPB-
PHY_RESET[L]
PHY_LREQ PHY_CLK
PHY_CNA PHY_CTL[0],[1]
PHY_DATA[0-7] PHY_LPS
PHY_LINK_ON
DDR SDRAM
IC1601
RA1613 to
RA1616
RA1609 to
RA1612
RA1625 to
RA1628
R1613 to
R1616
R1653 to
R1660
R1601 to
R1604
DDR_DQ16 to 31SDRAM_DQ16 to 31
SDRAM_DQ0 to 15
SDRAM_A0 to 15
SDRAM_CKE
SDRAM_RAS_L
SDRAM_CAS_L
SDRAM_WE_L
SDRAM_DQM0 to 3
SDRAM_DQS0 to 3
SDRAM_CLK0,1
SDRAM_CLK_L0,1 DDR_CLK0,1
DDR_CLK_L0,1
DDR_DQM0 to 3
DDR_DQS0 to 3
DDR_CKE
DDR_RAS_L
DDR_CAS_L
DDR_WE_L
DDR_BA1,2
DDR_A0 to 12
CN4104
J4112
CN1801
Media processor (SHEET 4)
Media
processor
IC1401
IC1406
IC1407
ATA_DMAACK[L] ATA_INTRQ ATA_ADD1 to 4
ATA_DIOR[L] ATA_DIOW[L] ATA_IORDY
ATA_DAT0 to 15 ATA_RESET ATA_DMARQ
RD/WR[L] ALE OE[L]/LDS[L] MADD1 to 22 CS[0] F_PROT[H] E5_RESET[L]
SYS_RESET[L] VIDEO_RXD
K_BUS_CLK K_BUS_REQ K_BUS_IN/OUT
VIDEO_RST[L] SPI_MOSI SPI_CLK VIDEO_CS
ALE MADD6 to 21
65Mbit Flash
IC1201
MADD1 to 22
IC1202
IC1203
DMARQ IORDY CS1FX CS3FX
DIOW DIOR DMACK INT_ATA
ATA_DMARQ
ATA_IORDY ATA_INTRQ
ATA_DMAACK[L] ATA_ADD0 to 4
ATA_DIOW[L] ATA_DIOR[L]
FLASH-ROM section(SHEET 7)
TO
DVD
Recorder unit
ATAPI Interface section (SHEET 6)
20bit FET
Bas switch
IC2201
RSTATA
HD_AT0 to 15 ATA_A0 to 2
ATA_DATA0 to 15
P_CTL[H] ATA_RESET
CN2201
FET Bas switch
IC2202
RD/WR[L] E5_RESET[L] OE[L]/LDS[L] CS[0]
LH_AR6 to 21
Block diagrams
DIGITAL 0 2
Video signal control section (SHEET 5)
TO CN4101
SHEET 10
TO CN4102
SHEET 10
CN1001 CN1002
Video
controller
IC1001
16M SDRAM
IC1002
AO_FSYNC AO_D[0] DAC_RST[L]
AO_SCLK A_DAC_CS AO_MCLKO
DAC_SCL DAC_Y_OUT DAC_SDA
480I[H]
CIN VYIN SYNCDET CROUT CBOUT
YVOUT COUT RYOUT RCOUT
AP A0 to A9
UDQM WE
CAS RAS
DQ0 to DQ15
DAC_CVBS_OUT
DAC_SY_OUT
DAC_SC_OUT
VI_D2 to 9 VIDEO_RST[L] VO_D1 to 15 SPI_MOSI
VIDEO_27M VIDEO_CS VIDEO_MUTE[M] SPI_CLK VIDEO_RXD
SYS_RESET[L] K_BUS_CLK K_BUS_REQ K_BUS_IN K_BUS_OUT
AO_IEC958 AI_D[0] A_MUTE2[H] DAC_RST[L]

(No.XA020SCH) 2-5
Audio signal control section (SHEET 8)
IC8202
IC8301
IC8302
2chDA converter
IC8201
24bit
A/D
combatr
IC8001
A_MUTE1[H]
ACD_RST[L]
I2C_CLK2 I2C_DATA2
TU_AUDIO[L/R]
F_AUDIO[L/R]
AOUTL
AOUTR
AI_D[0]
AO_SCLK AO_FSYNC AO_MCLKO
A_MUTE2[H]
AUDIO_OUT1[L/R]
DAC_SDA
DAC_SCL
A_DAC_CS
DAC_RST[L]
AO_D[0]
TO SHEET 13
AO_IEC958
Optical digital
OUT
J8401
J8501
CN3001
TO CN7001
SHEET 14
SYNC_DET I2C_DATA_A/V I2C_CLK_A/V
SECAM_DET[H] I2C_DATA2 I2C_CLK2 SEPA_IN[H]
STB RC_IN S_CLK LED_OUT
S_DATA_TOSYS
S_DATA_FRSYS
ADC_RST[L] A_MUTE[H] AV1_L AV2_H I2C_CLK2 I2C_DATA2 System controller
IC3001
P.MUTE[H] K_BUS_OUT SYS_RESET[L] K_BUS_IN P_CTL[H] K_BUS_CLK FAN_CTL
K_BUS_REQ SYNC_DET VD R.PAUSE SAT_CTL P.SAVE
I2C_DATA2 I2C_CLK2 TU_DATA TU_CLK
TU_V_MUTE[H] SW1 SW2 AFC RF_AGC
System controller section(SHEET 12)
Input/output terminal section
(SHEET 11)
CN3002
TO CN7101
SHEET 14
Muting
Q6031
TV Multiplex
sound processor
IC6701
TO SHEET 8
Tuner section(SHEET 13)
Tuner
TU6001 TU_AUDIO[L/R]
TU_VIDEO
VIDEO_OUT
TU_V_MUTE[H]
TU_DATA
TU_CLK AFC RF_AGC SW1 SW2
I2C_DATA2 I2C_CLK2
MAIN 0 3
AUDIO_IN1[L/R]
AUDIO_IN2[L/R]
DEC_OUT[L/R]
LINE_OUT[L/R]
TO SHEET 11
TO SHEET 11
AV1_L
AV2_H
Muting
Q8201,Q8202
IC8501 COAXIAL OUT
SCR_ID 4_3[H] RGB_TH[H] AV1_YC_IN[H] BIAS/RGB_CTL AV1_L AV2_H
RAPID_SW V_MUTE[L] TV[H] P50_I/O
J7301
J7302
CN7301
J7307
AUDIO OUT
4_3[H] P50_I/O AV_YC_IN[H] TV[H]
CROUT CBOUT
COUT YVOUT
Q7310 to
Q7312
SWITCH
IC7302
Video driver
IC7301
SWITCH
IC7303 to IC7306
TO
SHEET 8
REAR2_Y_IN
REAR2_C_IN
AV2_H RGB_TH[H]
VMUTE[L]
480I[L] RCOUT RYOUT
SCR_ID
AV1_L
REAR1_YV_IN
R
G
B
V_OUT
DEC_OUT[L/R] AUDIO_IN2[L/R]
LINE_OUT[L/R]
AUDIO_IN1[L/R]
R
G
B
V_OUT
AUDIO_OUT1[L/R]
L-1 SCART Terminal
L-2 SCART Terminal
RAPID_SW BIAS/RGB_CTL
REAR1_C_IN
J7308
S-VIDEO
COMPONENT
VIDEO OUT
J7309
Video controller
IC4001
I2C_DATA_A/V I2C_CLK_A/V
YTODIGI CTODIGI
F_AUDIO[L/R]
TO CN7102
SHEET 14
FRONT_VIDEO
FRONT_Y_IN
FRONT_C_IN
TU_VIDEO
Audio / video signal input control section (SHEET 9)
SECAM_DET[H] SEPA_IN[H]
SYNC+BGP.IN
HD_FROM_PDC
SYNC_DET
I2C_CLK2 I2C_DATA2
IC4201
IC4301
SECAM
IC4304
REAR1_C_IN REAR 1_YV_IN
REAR2_C_IN REAR 2_YV_IN
CN4001
Signal input/output terminal section(SHEET 10)
CN4101 CN4102 CN5101
TO CN1001
SHEET 5
TO CN1002
SHEET 5
TO CN5301
SHEET 1
SAT CONTROL
AV COMPULINK
J4109
RCOUT COUT 480I[H] RYOUT YVOUT CBOUT CROUT
YTODIGI CTODIGI
SAT_CTL
R.PAUSE
K_BUS_REQ K_BUS_OUT K_BUS_CLK K_BUS_IN SYS_RESET[L]
P_MUTE[H] P_CTL[H] SYNC_DET VD
AO_FSYNC AO_D[0] DAC_RST[L] AO_SCLK A_DAC_CS AO_MCLKO
DAC_SCL DAC_SDA
AI_D[0] A_MUTE2[H] AO_IEC958
FAN_CTL P.CTL[H] P.SAVE
FW7301

2-6 (No.XA020SCH)
Power
transformer
T5001
Power supply section (SHEET 1)
AC IN TO CN5102
SHEET 10
CN5304 CN5305CN5301
CN5302
TO Fan assembly
FAN
5V REG.
IC5304
3.3V REG.
IC5308
1.8V REG.
IC5307
3.3V REG.
IC5303
1.8V REG.
IC5302
2.5V REG.
IC5305
TO DVD Recorder unit
TO CN5101
SHEET 10
AC-DC
D5001
Switching
regurator
IC5101
DC5V DV12V
D5.0V
V3.3V
DV3.3V
DC1.8V
D1.8V
D2.5V
P.SAVE[L]
FL Display section (SHEET 14)
Operation switch section (SHEET 14)
CN7001
FL Display driver
IC7001
FL Display
DI7001
Remote controller
IC7002 TO CN3001
Operation switch
S7001
LIGHTING
D7043 RC-IN
KEY1,KEY2
STB S_DATA_FRSYS
S_DATA_TOSYS S_CLK
1G to 12G
S1 to S16
S12 to S15
BLUE_LED
Operation switch
S7132,S7134,S7135
S7113 to S7115
S12 to S15 KEY1,KEY2
FRONT C/Y
Front S-video IN
Front A/V IN
J7002
J7001
FRONT VIDEO
F.AUDIO[L/R]
CN7101
TO CN3002
CN7102
TO CN4001
SHEET 9
SW/DISPLAY 2 8
SW.REG 0 1
OPERATE 2 7

(No.XA020SCH) 2-7
Parts are safety assurance parts.
When replacing those parts make
sure to use the specified one.
T5001
Q5301
D5206
C5002
D5203
D5104
R5305
D5001
D5201 Q5310
B5302
Q5305
C5304C5202
R5301
R5303
L5201
R5306
C5104
K5102
C5302
C5301
C5209 C5309
C5001
IC5301
L5206
R5304
R5324
IC5304
Q5302
R5317
CN5304
D5207
D5310
R5103
D5101
C5206
C5308
R5107
R5318
B5001
C5205
D5301
D5212
C5102
PC5101
C5303
LF5002
C5003
R5108
C5105
R5106
C5103
R5105
D5103
R5101
L5205
B5301
D5309
D5302
CP5301
IC5306
VA5001
R5302
C5101
D5102
IC5308
R5323
C5326
CN5302
IC5303
R5328R5327
D5204
C5320
B5504
C5327
D5317
C5201
R5321
C5004
R5310
D5306
R5001
D5307
Q5308
C5313
F5001
CN5001
C5314
D5209
R5332
D5304
CN5305
C5318
D5208
C5208
D5311 IC5302
D5315
IC5305
Q5304
C5307
L5204
Q5313
R5333 R5334
D5202
R5335
Q5314
Q5303
C5315
D5316
C5207
D5211
CN5301
B5505
C5319
R5314
D5313
C5321
B5501
C5106
IC5101
D5308
C5324
B5303
C5005
IC5307
B5304
D5210
R5307
C5325
D5312
C5322 C5323D5303
R5331
C5317
D5305
C5332
C5312
C5330
R5319
R5320 C5316
D5318
C5329
C5331
D5214
C5211
C5311
L5208
L5202
C5203 C5305
R5308
CN5303
Q5315
Q5316
R5329
R5330
R5337R5336
D5314
B5503
B5502
Q5317
B5506
C5310
D5205
C5204 C5306
L5203
D5105
D5106 R5102
R5104
C5107
VA5003
SG5001
QQS0263-001
DTA114EKA
UN2111
RT1P141C
AU01Z
ERA18-02
1SR153-400
10ERB20
1F4G
/250
#
RK34
1SS133
1SS270A
D3SBA60
GBJ4J
10ERB20
ERA18-02 2SD2144S/UV/
2SC3576
2SD2144S/UV/
2SC3576
/10/10
/1k
QQR0678-001
QQR0621-001
/50
/50
/16 /16
/250
TL431/A/
MM1431AT
UTCTL431
L5431
Vout
NC
GND
CnCont
Sub
Vin
MM1565AF
DTC114EKA
UN2211
RT1N141C
GND
GND
GND
DV12V
DV5V
DV3.3V
DC1.8V
#
AU01Z
ERA18-02
1SR153-400
10ERB20
1F4G
RK34
2W
AU01
ERA18-02
1SR153-400
10ERB40
1F4G
/50
/10
#
/100
MTZJ15A
RD15ES/B1/
AU01Z
ERA18-02
1SR153-400
10ERB20
1F4G
##
/1k
PC123Y22FZ
LTV-817M/BC/
/10
#
#
1W
/50
/35
AU01Z
ERA18-02
1SR153-400
10ERB20
1F4G
2W
##
RK34
MTZJ12B
RD12ES/B2/
/125
CP
Cont Cn
Sub
Vin
GND
NC
Vout
MM1563EF
##
QAF0039-431
QAF0024-431
QAF0023-431
QAF0055-431
#
/1k
AU01
ERA18-02
1SR153-400
10ERB40
1F4G
Cont
GND
GND GND
Vin
Cn
Vout
NC
MM1663DH
#
/10
##
D1.8V
D1.8V
D1.8V
D2.5V
D3.3V
GND
GND
GND
GND
Sub
Cont Cn
GND
NC
VoutVin
MM1563DF
RK34
/50
/50
##
RL2Z
##
/6.3
/250
#
1SS133
1SS270A
1/2W
#
MTZJ27C
RD27ES/B3/
2SD1858/QR/
/10
/250
#
/50
RK34
MTZJ5.6C
RD5.6ES/B3/
GND
FAN
/50
RK34
/10
1S4
AW04
SBO40
I O G ref SW
PQ5EV3
1A3G
10EDB20
ERA15-02
Cont
GND
GND GND
Vin
Cn
Vout
NC
MM1662GH
DTC114EKA
UN2211
RT1N141C
/10
2SA1585S/QR/
1/2W
RK34
DTC114EKA
UN2211
RT1N141C
DTA114EKA
UN2111
RT1P141C
/50
RL2Z
##
/10
AU01Z
ERA18-02
1SR153-400
10ERB20
1F4G
DC3.9[+]
DC3.9[-]
-29V
AL-12V
FAN_CTL
AL12V
P.CTL[H]
SW12V
D5V
SW5V
SW5V
AL5.3V
P.SAVE[L]
GND
GND
GND
GND
GND
GND
V3.3V
BT2
48V
17V
##
/10
1/4W
FR
1S4
AW04
SBO40
#
/50
##
/50
OCP/
FB S D Vcc GND
STR-G6653-F9
RK34
/10
#
/250
#
SW
Sub
Vin
Cn
GND
NC
Vout
MM1561JF
#
RK34
2W
#
/50
#
1A3G
10EDB20
ERA15-02
#
/16 /50
MTZJ11C
RD11ES/B3/
/10
#
/50
#
/50
/50
#
/10
1A3G
10EDB20
ERA15-02
#
/10
#
/50
#
AU01Z
ERA18-02
1SR153-400
10ERB20
1F4G
##
/25
##
/50
##
##
/10 /10
2W
#
GND
GND
DV12V
DV5V
#
2SA1585S/QR/
2SA1585S/QR/
1SS133
1SS270A
##
##
DTC114EKA
UN2211
RT1N141C
##
/50
RK34
/16 /16
AU01Z
ERA18-02
1SR153-400
10ERB20
1F4G
AU01Z
ERA18-02
1SR153-400
10ERB20
1F4G
/50
QAF0039-431
QAF0024-431
QAF0023-431
QAF0055-431
#
MY MY
0.022
20k
1001200
220
1.5k
33u
3.9k
470p
0.033
0.15
680 100
0.068
33u
6.8k
1k
2.2k
68k
18
100
680
1k
4.7
4700p
1
0.33
470p
3.9k
27
68
68k
33u
1.5A
4.7k
100p
1.2k
1
820680
470p
470p
220
47k
8.2
4.7M
1
470p
470
470p
2200
100
33u
100 10k
1k
22
1500 1
47
22
0.01
1
100p
390
470p
100 2.2
10k
100
22
0.01
22
3.0k
4.7k 100
1
470p
180
22
33u
33u
2200 100
390
10k
470
47010k
22
2200 100
33u
1.2k
1k
220p
Power supply section
Standard schematic diagrams
SHEET 1
TO CN5101
SHEET 10
TO DVD-RAM
DRIVE
for only europe
TO CN5102
SHEET 10
TO FAN UNIT
TO DVD-RAM
DRIVE
for except europe

2-8 (No.XA020SCH)
IC1801
PHY_LPS
CN1801
R1818
L1801L1802 C1804
RA1801
C1805
C1803C1806
PHY_CTL[0]
X1801
RA1802
B1801B1802
D3.3V
R1820
PHY_CNA
K1801
C1813
C1810
R1801
PHY_DATA[0-7]
PHY_CTL[1]
PHY_CLK
PHY_LINK_ON
PHY_RESET[L]
R1802
R1819
PHY_LREQ
C1814
GND
R1823
T1801T1801T1801T1801T1801T1801T1801T1801
R1805
R1810 R1806
R1812
R1808 R1807 R1809
C1801
R1821 R1811
C1808
R1822
C1809
C1807
C1811
C1812
R1813 R1814 R1815 R1816R1817
C1802
R1803 R1804
LREQ
SYSCLK
CNA
CTL0
CTL1
D0
D1
D2
D3
D4
D5
D6
D7
PD
LPS
NC AGND
TPB0-
TPB0+
TPA0-
AGND
R0
TPA0+
TPBIAS0
R1
AVDD
NC
NC
NC
AGND
NC
NC
TSB41AB2PAP
#
QGB2027L1-10X
#
_0.5%
#
#
OPEN
#
#
/6.3
#
/6.3
#
NAX0551-001X
NAX0666-001X
#
OPEN
#
#
SHORT
#
OPEN
OPEN
#
#
_0.5%
#
OPEN
##
NQR0444-001X
#
NQR0444-001XNQR0444-001XNQR0444-001XNQR0444-001XNQR0444-001XNQR0444-001XNQR0444-001X
#
DGND DGND C/LKON PC0 PC1 PC2 ISO CPS DVDD DVDD TESTM BRIDGE TEST0 AVDD AVDD AGND
DGND DGND DVDD DVDD
XO XI
PLLGND PLLGND PLLVDD
NC NC
RESET
AVDD AVDD AGND AGND
#
OPEN
#
## #
#
#
#
OPEN
#
#
#
#
#
#
#
#
#
#
# #
5.6k
10u
0.1
10k
0.1
1010
10k
10k
0‘
0‘
750
0‘
0‘
390k
0‘
10k 10k
10k
1
1k
12p
0‘
12p
0.1
0.1
0.1
56 56 56 565.1k
270p
10k 10k
TPB0+
TPA0-
TPA+
TPA-
TPB+
TPBIAS0
TPB-
PHY_DATA[0]
PHY_DATA[1]
PHY_DATA[3]
PHY_DATA[4]
PHY_DATA[5]
TPB0-
GND
PHY_DATA[0-7]
TPA0+
PHY_DATA[7]
D3.3V
PHY_DATA[6]
PHY_DATA[2]
1801_X0 1801_XI
IEEE1394 section
SHEET 2
TO SHEET 4
TO CN4104
SHEET 10

(No.XA020SCH) 2-9
IC1601
SDRAM_A[14-17]
C1710C1708
D3.3V
SSTL2_VDD
C1621
R1707
GND
GND
SDRAM_VREF
K1701
SDRAM_CLK[0]
SDRAM_CLK[1]
SDRAM_CLK_L[0]
SDRAM_CLK_L[1]
C1622
R1653
R1654
R1655
R1656
C1623
IC1602
R1645
R1642
C1624
IC1601IC1601
R1657
IC1601
C1625
R1658
R1646
R1647
SDRAM_DQS[0]
SDRAM_DQS[1]
SDRAM_DQS[2]
SDRAM_DQS[3]
IC1601 IC1602
R1659
R1660
IC1602
RA1617
R1617
R1618 R1623
R1608
R1607
R1606
R1605
RA1629
R1648
R1649
R1644
IC1602IC1602
R1650
IC1602
R1651
R1624
R1619
R1620 R1625
RA1630
IC1601
R1652
C1701
C1703
C1704
RA1609
RA1618
RA1619
RA1620
C1702
RA1621
RA1631
RA1632
RA1625
RA1626
R1609
C1707
RA1610
RA1611
RA1612
C1605 C1606
IC1701
C1607 C1608 C1609 C1610 C1611 C1612
K1702
C1613 C1614
RA1613
C1615 C1616 C1617 C1618 C1619 C1620
RA1614
RA1615
RA1616
RA1627
RA1628
R1610
R1611
R1612
RA1622
RA1623
RA1624
C1709
C1647
R1701R1702
R1703
R1704
C1648
RA1601
RA1602
RA1603
RA1604
C1637
C1601 C1602
C1638
RA1605
RA1606
RA1607
RA1608
C1639
C1640
R1626
SDRAM_A[0-12]
R1604
R1603
R1602
R1601
SDRAM_CKE
SDRAM_RAS_L
SDRAM_CAS_L
SDRAM_WE_L
R1621
R1622 R1627 R1628
R1613
C1649 C1651
C1643C1641
C1650 C1652
C1644C1642
C1645
C1646
C1705
R1614
R1615
C1653
C1706
R1616
C1654
SDRAM_DQ[16-31]
SDRAM_DQ[0-15]
SDRAM_DQM[0]
SDRAM_DQM[1]
SDRAM_DQM[2]
SDRAM_DQM[3]
C1657
C1658
C1655
C1656
A0
A1
A2
A3
A4
A5
A6
A7
A8
A9
A10/AP
A11
A12
BA0
BA1
/6.3
T
/6.3
T
OPEN
SHORT
A0
A1
A2
A3
A4
A5
A6
A7
A8
A9
A10/AP
A11
A12
BA0
BA1
OPEN
VREF
VDD
VDD
VDD
VDDQ
VDDQ
VDDQ
VDDQ
VDDQ
#1
D15
D14
D13
D12
D11
D10
D9
D8
D7
D6
D5
D4
D3
D2
D1
D0
GNDQ
GNDQ
GNDQ
GNDQ
GNDQ
GND
GND
GND
OPEN
OPEN
CS
CKE
RAS
CAS
WE
LDM
UDM
LDQS
UDQS
CLK
CLK
NC
NC
NC
NC
NC
NC
NC
CS
CKE
RAS
CAS
WE
LDM
UDM
LDQS
UDQS
CLK
CLK
OPEN
VREF
VDD
VDD
VDD
VDDQ
VDDQ
VDDQ
VDDQ
VDDQ
#2
D15
D14
D13
D11
D11
D10
D9
D8
D7
D6
D5
D4
D3
D2
D1
D0
GNDQ
GNDQ
GNDQ
GNDQ
GNDQ
GND
GND
GND
NC
NC
NC
NC
NC
NC
NC
/6.3
/6.3
OPEN
39
PQ015YZ01Z
15 55 61 1 33
SHORT
3 9 15 55 61 1 33
OPEN
OPEN
OPEN
OPEN
OS
OPEN
_0.5%
_0.5%
OPEN
/4V /4V
OPEN
OPEN OPEN
OPENOPEN
OPEN
OPEN
OPEN
OPENOPEN
OS OS
4747
0.1 0.1
0‘
0‘
0‘
0‘
0.1
10
0.1
22
0.1
22
22
22
100
27
27 27
47
47
47
47
47
100
47
100
100
27
100
100 100
47
100
0.1
0.1
100
22
100
100
100
100
100
47
47
10
10
0.1
22
22
22
0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1
22
0.1 0.1 0.1 0.1 0.1
22
22
22
10
10
100
100
100
270 1k
2.2k
2.2k
0.1
100
100
100
100
220 220
0.1
100
100
100
100
0.1
100
10
10
10
10
27
27 27 27
0‘
0.1 0.1
0.10.1
0.1
0‘
0‘
0.1
0‘
0.1
0.10.1
SDRAM_DQM[0]
DDR_RAS_L
DDR_CKE
DDR_WE_L
DDR_CAS_L
SDRAM_A[14-17]
D3.3V
SSTL2_VDD
DDR_DQ[7]
DDR_DQM[2]
DDR_WE_L
DDR_CAS_L
DDR_RAS_L
DDR_CKE
DDR_A[0]
DDR_DQ[6]
DDR_DQ[5]
DDR_DQ[4]
DDR_DQ[3]
DDR_DQ[2]
DDR_DQ[1]
DDR_DQ[0]
DDR_DQ[8]
DDR_DQ[9]
DDR_DQ[10]
DDR_DQ[11]
DDR_DQ[12]
DDR_DQ[13]
DDR_DQ[14]
DDR_DQ[15] DDR_DQ[23]
DDR_DQ[22]
DDR_DQ[21]
DDR_DQS[1]
DDR_DQS[0]
DDR_DQM[1]
DDR_DQM[0]
DDR_DQ[20]
DDR_DQ[19]
DDR_DQ[18]
DDR_DQ[17]
DDR_DQ[16]
DDR_DQ[24]
DDR_DQ[25]
DDR_DQ[26]
DDR_A[0]
DDR_A[1]
DDR_A[11]
DDR_A[10]
DDR_A[12]
DDR_BA[1]
DDR_A[9]
DDR_A[8]
DDR_A[7]
DDR_A[6]
DDR_A[5]
DDR_A[4]
DDR_A[3]
DDR_A[2]
DDR_DQ[27]
SDRAM_DQM[0]
DDR_DQ[28]
DDR_DQ[29]
DDR_DQ[30]
DDR_DQ[31]
SDRAM_DQM[1]
SDRAM_DQM[2]
SDRAM_DQM[3]
SDRAM_A[0]
SDRAM_DQS[0]
SDRAM_DQS[1]
SDRAM_DQS[2]
SDRAM_DQS[3]
DDR_DQ[16]
DDR_DQM[0]
DDR_DQM[1]
DDR_DQM[2]
DDR_DQM[3]
DDR_DQ[0]
DDR_DQ[1]
DDR_DQ[2]
DDR_DQ[3]
DDR_DQ[4]
DDR_DQS[0]
DDR_DQS[1]
DDR_DQS[2]
DDR_DQS[3]
DDR_CS[0]SDRAM_A[17]
DDR_CLK_L[1]
DDR_CLK[1]
DDR_DQS[3]
DDR_DQS[2]
DDR_DQM[3]
DDR_DQM[2]
DDR_A[1]
DDR_A[0]
DDR_A[1]
DDR_A[11]
DDR_A[10]
DDR_A[12]
DDR_BA[1]
DDR_A[9]
DDR_A[8]
DDR_A[7]
DDR_A[6]
DDR_A[5]
DDR_A[4]
DDR_A[3]
DDR_A[2]
DDR_BA[0]
DDR_BA[1]
SDRAM_A[0-12]
DDR_BA[0]
DDR_BA[1]
DDR_DQ[17]
DDR_BA[0] DDR_BA[0]
DDR_DQ[18]
SDRAM_DQM[1]
SDRAM_DQM[2]
SDRAM_DQM[3]
SDRAM_DQS[0]
SDRAM_DQS[1]
DDR_A[0]
DDR_A[1]
DDR_DQ[19]
DDR_DQ[20]
DDR_DQ[21]
DDR_DQ[22]
DDR_DQ[23]
DDR_DQ[24]
DDR_DQ[25]
DDR_DQ[26]
DDR_DQ[27]
DDR_DQ[28]
DDR_DQ[29]
DDR_DQ[30]
DDR_DQ[31]
SDRAM_DQS[2]
SDRAM_DQS[3]
VTT
DDR_DQ[5]
DDR_DQ[6]
DDR_DQ[7]
DDR_DQ[8]
DDR_DQ[9]
DDR_DQ[10]
DDR_DQ[11]
DDR_DQ[12]
DDR_DQ[13]
DDR_DQ[14]
DDR_DQ[15]
SDRAM_DQ[0-15]
SDRAM_CLK[0] SDRAM_CLK[0]
DDR_A[11]
DDR_A[10]
DDR_A[12]
DDR_A[9]
DDR_A[8]
DDR_A[7]
DDR_A[6]
DDR_A[5]
DDR_A[4]
DDR_A[3]
DDR_A[2]
DDR_A[11]
DDR_A[10]
DDR_A[12]
SDRAM_CLK[1]
DDR_A[9]
DDR_A[8]
SDRAM_A[15]
SDRAM_A[1]
SDRAM_A[2]
SDRAM_CAS_L
SDRAM_A[3]
SDRAM_A[4]
SDRAM_A[5]
SDRAM_A[6]
SDRAM_A[7]
SDRAM_A[8]
SDRAM_A[9]
SDRAM_A[10]
SDRAM_A[11]
SDRAM_A[12]
SDRAM_A[14]
DDR_A[7]
DDR_A[6]
DDR_A[5]
DDR_A[4]
DDR_A[3]
DDR_A[2]
SDRAM_CLK[1]
SDRAM_CLK_L[0]
SDRAM_CLK_L[1]
SDRAM_RAS_L
SDRAM_CKE
DDR_WE_L
DDR_WE_L
DDR_CAS_L
DDR_RAS_L
DDR_CKE
DDR_CAS_L
DDR_RAS_L
DDR_CKE
SDRAM_WE_L
SDRAM_WE_L
SDRAM_CAS_L
SDRAM_RAS_L
SDRAM_CKE
SDRAM_CLK_L[0]
SDRAM_DQ[15]
SDRAM_CLK_L[1]
SDRAM_DQM[0]
SDRAM_DQM[1]
SDRAM_DQM[2]
SDRAM_DQM[3]
SDRAM_DQS[0]
SDRAM_DQS[1]
SDRAM_DQS[2]
SDRAM_DQS[3] DDR_CLK[0]
SDRAM_DQ[14]
DDR_CLK_L[0]
DDR_CLK[0]
SDRAM_CLK[0]
DDR_DQM[0]
DDR_DQM[1] DDR_DQM[3]
DDR_DQS[2]DDR_DQS[0]
DDR_DQS[1] DDR_DQS[3]
DDR_CLK_L[1]SDRAM_CLK[1]
SDRAM_CLK_L[0]
SDRAM_CLK_L[1]
DDR_CLK_L[0]
DDR_CLK[1]
SDRAM_DQ[13]
SDRAM_DQ[12]
SDRAM_DQ[11]
SDRAM_DQ[10]
SDRAM_DQ[9]
SDRAM_DQ[8]
SDRAM_DQ[7]
DDR_DQ[16]
DDR_DQ[17]
DDR_DQ[18]
DDR_DQ[19]
DDR_DQ[20]
SDRAM_DQ[6]
DDR_DQ[21]
SDRAM_DQ[5]
SDRAM_DQ[4]
SDRAM_DQ[3]
SDRAM_DQ[2]
SDRAM_DQ[1]
SDRAM_DQ[0]
SDRAM_DQ[31]
SDRAM_DQ[30]
SDRAM_DQ[29]
DDR_DQ[22]
DDR_DQ[23]
SDRAM_DQ[28]
SDRAM_DQ[27]
SDRAM_DQ[26]
SDRAM_DQ[25]
SDRAM_DQ[24]
SDRAM_DQ[23]
SDRAM_DQ[22]
SDRAM_DQ[21]
SDRAM_DQ[20]
SDRAM_DQ[19]
SDRAM_DQ[18]
DDR_DQ[24]
DDR_DQ[25]
DDR_DQ[26]
DDR_DQ[27]
DDR_DQ[28]
DDR_DQ[29]
DDR_DQ[30]
DDR_DQ[31]
DDR_DQ[0]
DDR_DQ[1]
DDR_DQ[2]
DDR_DQ[3]
DDR_DQ[4]
DDR_DQ[5]
DDR_DQ[6]
DDR_DQ[7]
DDR_DQ[8]
DDR_DQ[9]
DDR_DQ[10]
DDR_DQ[11]
DDR_DQ[12]
DDR_DQ[13]
DDR_DQ[14]
DDR_DQ[15]
SDRAM_DQ[16-31]
SDRAM_DQ[0]
SDRAM_DQ[1]
SDRAM_DQ[2]
SDRAM_DQ[3]
SDRAM_DQ[4]
SDRAM_DQ[5]
SDRAM_DQ[6]
SDRAM_DQ[7]
SDRAM_DQ[8]
SDRAM_DQ[9]
SDRAM_DQ[10]
SDRAM_DQ[11]
SDRAM_DQ[12]
SDRAM_DQ[13]
SDRAM_DQ[14]
SDRAM_DQ[15]
SDRAM_DQ[16]
SDRAM_DQ[17]
SDRAM_DQ[18]
SDRAM_DQ[19]
SDRAM_DQ[20]
SDRAM_DQ[21]
SDRAM_DQ[22]
SDRAM_DQ[23]
SDRAM_DQ[24]
SDRAM_DQ[25]
SDRAM_DQ[26]
SDRAM_DQ[27]
SDRAM_DQ[28]
SDRAM_DQ[29]
SDRAM_DQ[30]
SDRAM_DQ[31]
SDRAM_DQ[17]
SDRAM_DQ[16]
81
0.1
81
TO SHEET 4
DDR SDRAM section
SHEET 3