JVC LT-46DS9BJ User manual

Trade Mark of the DVB Digital Video Broadcasting
Project (1991 to 1996) Number : 5225, 5226
INSTRUCTIONS
WIDE LCD PANEL TV
LT-46DS9BJ
LT-42DS9BJ
LCT2395-002A-U
LT-46DS9BJ_EN.book Page 0 Wednesday, April 9, 2008 2:08 PM

LT-46DS9BJ_EN.book Page 0 Wednesday, April 9, 2008 2:08 PM

1
USE SETTING
TROUBLE?
PREPARE
IMPORTANT
Please refer to the separate manual
when watching digital channels.
Before reading the separate manual
Read this manual’s “Warning” section
(P. 2), and understand how to use the
TV safely. After that follow the
instructions in the “Getting started”
section (P. 8 - 17) to connect the aerial
and other external devices to the TV,
and configure the settings for the TV.
A separate manual “WATCHING
DIGITAL CHANNELS” is provided.
USE TROUBLE?
SETTING
WATCHING DIGITAL CHANNELS
Before reading this manual
Read the separate user manual (INSTRUCTIONS), “Warning”
(P. 2), and understand howto use th e TV safely. After that follow the
instructions in “Getting started” (P. 8) to connect the aerial and other
external devices to the TV, and configure the settings for the TV.
Digital terrestrial broadcasting (DVB-T)
gDigital channels
Analogue terrestrial broadcasting (VHF / UHF) and
analogue cable TV
gAnalogue channels
This TV can receive digital terrestrial broadcasting (DVB-T)
in the United Kingdom. Digital terrestrial broadcasting
(DVB-T) reception in other countries is not guaranteed.
The on-screen displays (including DTV menus) are in
English. No other languages are available.
Contents
This manual only provides information on
watching digital channels. Other information is
explained in the “INSTRUCTIONS”. Please read
both this manual and the “INSTRUCTIONS”
manual.
Note
Watching digital channels........................................... ..... ........2
Display the programme information ....................................................4
View subtitles ...................................................................................... 4
Select audio language ........................................................................5
View teletext information..................................................................... 5
Using EPG (Electronic Programme Guide) ...............................6
Customising your TV ............................................................. ..8
Edit PR (Edit PR List).......................................................................... 9
Timer................................................................................................. 10
Configuration..................................................................................... 12
Setup................................................................................................. 13
Installation......................................................................................... 14
Troubleshooting................................................................. .. .16
Technical information ......................... ...................................17
LCD
STB
AUDIO
F.T/L
TV/RADIO GUIDE
TV/DTV
TOPMENU
GUIDE
nf
Information for Users on Disposal of Old
Equipment
ENGLISH
Attention:
This symbol is
only valid in
the European
Union.
[European Union]
This symbol indicates that the electrical and electronic equipment
should not be disposed as general household waste at its end-of-
life. Instead, the product should be handed over to the applicable
collection point for the recycling of electrical and electronic
equipment for proper treatment, recovery and recycling in
accordance with your national legislation.
By disposing of this product correctly, you will help to conserve
natural resources and will help prevent potential negative effects
on the environment and human health which could otherwise be
caused by inappropriate waste handling of this product. For more
information about collection point and recycling of this product,
please contact your local municipal office, your household waste
disposal service or the shop where you purchased the product.
Penalties may be applicable for incorrect disposal of this waste, in
accordance with national legislation.
(Business users)
If you wish to dispose of this product, please visit our web page
www.jvc-europe.com to obtain information about the take-back of
the product.
[Other Countries outside the European Union]
If you wish to dispose of this product, please do so in accordance
with applicable national legislation or other rules in your country for
the treatment of old electrical and electronic equipment.
Dear Customer,
This apparatus is in conformance with the valid European directives and standards
regarding electromagnetic compatibility and electrical safety.
European representative of Victor Company of Japan, Limited is:
JVC Technical Services Europe GmbH
Postfach 10 05 04
61145 Friedberg
Germany
LT-46DS9BJ_EN.book Page 1 Wednesday, April 9, 2008 2:08 PM

2
Warning Please follow all the guidelines below
Follow this manual regarding setup!
zConnect only to a 220 - 240 V, 50 Hz
AC outlet.
Unplug the power cord when
going out!
zThe power buttons on
the remote control and
the TV unit cannot
completely turn off the
TV. (Make appropriate
arrangements for
bedridden people.)
Make enough room for inserting
and removing the power plug!
Place the TV as close to the outlet
as possible!
zEven if the TV’s power lamp is unlit,
the main power supply is not cut off
unless the power cord is
unplugged. The main power
supply for this TV is controlled
by inserting or removing the
power plug.
Never cut or damage the
power cord!
zIf the power plug is
not the right shape,
or the power cord is
not long enough,
use an appropriate
plug adapter or
extension cable. (Consult your
retailer.)
zIf you have cut or damaged the
power cord.
g“Technical information” (P. 34)
zTo change the fuse in power plug
g“Technical information” (P. 34)
Never try to repair the TV
yourself!
gIf the problem cannot be
solved in
“Troubleshooting” (P. 32),
unplug the power cord and
contact your retailer.
For more details on installation, usage and safety gConsult your retailer
When attaching the TV to the
wall, use the optional JVC
wall mounting unit!
zConsult a qualified technician.
zSee the included manual on
mounting procedures.
zJVC assumes no responsibility
for damage due to improper
mounting.
Do not allow the TV to fall!
zDo not rest your elbows on, or allow
children to hang from the TV. There
is a risk that the TV will fall and
cause injuries.
zMake use of the hole on the back of
the stand to prevent the TV from
falling easily. (P. 8)
If the TV is damaged or
behaving strangely, stop
using it at once!
gUnplug the power cord
and contact your retailer.
Take care when handling the
glossy finish!
zFor more details, see P. 7.
Handle LCD panel with care!
zUse a soft, dry cloth when
cleaning.
Never dismantle the rear panel!
zIt may cause an electric shock.
Never place anything on the
TV!
Never expose to rain or
moisture!
Never insert objects into the
cabinet openings!
zIt may cause a fatal
electric shock. Take
care when children
are near.
Never obstruct the ventilation
holes!
zIt may cause overheating or a
fire.
zPlacing liquids,
naked flames,
cloths, paper, etc. on
the TV may cause a
fire.
zTo prevent fire or
electric shock, never
allow liquids to enter
the unit.
Never listen to headphones at
high volume!
zIt may damage your hearing.
Hold the TV so as not to scratch
the screen!
zDo not touch the screen when
carrying the TV.
Do not carry the TV on
your own!
zIn order to prevent
accidents, ensure that
the TV is carried by
two or more people.
On disposal of the TV!
zFollow the
instruction in
“Information for
Users on Disposal
of Old Equipment”
(P. 1).
LT-46DS9BJ_EN.book Page 2 Wednesday, April 9, 2008 2:08 PM

USE SETTING
TROUBLE?
PREPARE
IMPORTANT
3
Please read “Getting started” (P. 8 - 17).
The main descriptions are in the following pages.
Analogue terrestrial broadcasting (VHF / UHF) and analogue cable TV
gAnalogue channels
Digital terrestrial broadcasting (DVB-T) gDigital channels
Connecting the
external devices
and aerial
Choosing a video
connection
Watch pay-TV
digital channels
Initial settings
Editing analogue
channels
zIf you want to edit the digital channels, refer to “Edit PR (Edit PR List)”
(P. 9) on the separate manual “WATCHING DIGITAL CHANNELS”.
9
PAGE
12
PAGE
10
PAGE
8
PAGE
Suomi
Română
Türkçe
Language
Svenska
Norsk
Dansk
Nederlands
Castellano
Italiano
Deutsch
Français
English
Català
Português
Magyar
Polski
13
PAGE
15
PAGE
First things first! zWarning............................................. 2
Getting started zRemote control.................................. 4
zNames and functions of parts ........... 6
zGetting started .................................. 8
z“CH/CC” list..................................... 17
Let’s try it out
Try the advanced features
zEnjoy your new TV!......................... 18
zWatching analogue channels .......... 19
zViewing teletext on the analogue
channel ........................................... 20
zWatching videos / DVDs ................. 21
zUseful functions .............................. 22
Just the way you like it zConfiguring your remote control...... 24
zCustomising your TV....................... 26
Picture............................................ 26
Features (sub menu)...................... 27
Sound............................................. 28
Features......................................... 29
Set Up ............................................ 30
When you have trouble zTroubleshooting .............................. 32
zTechnical information ...................... 34
zSpecifications .................................. 35
WATCHING DIGITAL CHANNELS (Separate manual)
zWatching digital channels ..........2
zUsing EPG .................................6
zCustomising your TV..................8
zTroubleshooting....................... 16
zTechnical Information .............. 17
To set up your TV Contents
LT-46DS9BJ_EN.book Page 3 Wednesday, April 9, 2008 2:08 PM

4
The functions of the remote control buttons are explained as
follows.
This remote control can be configured to operate up to four
different devices simply by changing the remote code.
“Configuring your remote control” (P. 24)
Mute.
Turn on / off (standby) the TV.
Enter channel number.
Enter teletext page number on the analogue
channel.
Channel information. “Watching analogue channels”
(P. 19)
Watch video etc. “Watching videos / DVDs” (P. 21)
Colour buttons:
Select a page when viewing teletext on the
analogue channel.
Operate functions in menus.
Switch between “TV / STB / DVD / AUDIO”.
(P. 24)
STB
AUDIO
Switch between digital / analogue channels.
Display on-screen menu. “Customising your TV” (P. 26)
Select and confirm settings in menus.
Select channel.
Select teletext page on the analogue channel.
Volume control.
View teletext on the analogue channel.
“Viewing teletext on the analogue channel” (P. 20)
View teletext information on the digital channel. (Refer to
page 5 on the separate manual “WATCHING DIGITAL
CHANNELS”.)
To the previous menu.
Hold the current page when viewing teletext on the
analogue channel. (P. 21)
Display your favourite list when viewing teletext on the
analogue channel. (P. 20)
Remote control
LCD
STB
AUD IO
F.T/L
TV/RADIO GUIDE
TV/DTV
TOP MENU
GUIDE
LT-46DS9BJ_EN.book Page 4 Wednesday, April 9, 2008 2:08 PM

5
USE SETTING
TROUBLE?
PREPARE
IMPORTANT
zFor buttons that can be used to operate other devices, refer to
“Configuring your remote control” (P. 24).
zFor more details on using the remote control when viewing digital
channels, refer to the separate manual “WATCHING DIGITAL
CHANNELS”.
Display hidden information when viewing teletext on the
analogue channel. (P. 21)
Switch between TV / Radio when watching digital
channels.
Enlarge the text when viewing teletext on the analogue
channel. (P. 21)
Display the Electronic Programme Guide when watching
digital channels.
Choose a favourite channel when viewing analogue
channels. (P. 19)
Display sub-pages when viewing teletext on the analogue
channel. (P. 20)
Save your favourite page when viewing teletext on the
analogue channel. (P. 20)
Switch briefly from teletext to TV when viewing teletext on
the analogue channel. (P. 21)
Display the index page when viewing teletext on the
analogue channel. (P. 21)
View subtitles when watching digital channels.
Change the aspect ratio. (P. 22)
Turn on “3D Cinema Sound”. (P. 22)
Change the sound mode or language. (P. 23)
Change the audio language when viewing digital
channels.
Set the sleep timer. (P. 23)
Note
LT-46DS9BJ_EN.book Page 5 Wednesday, April 9, 2008 2:08 PM

6
zWhen “Power Lamp” is set to “Off”, the Power lamp will not light up.
g“Power Lamp” (P. 29)
zThe power lamp will blink before the “Record” timer starts to function.
When the “Record” timer is in progress, the power lamp lights even though
the TV is off (standby). For details, refer to “Timer” (P. 11) on the separate
manual “WATCHING DIGITAL CHANNELS”.
zPeel off the protection films pasted on the glossy finish of the TV after the
TV has been placed properly. (P. 7)
Touch sensor panel operation
Touch on the function name to operate the function
Operate the menus
Use as “MENU” button or “OK” button.
Use as “ ” and “ ” buttons.
Use as “ ” and “ ” buttons.
zFor details on menu operations, refer to “Customising your TV”
(P. 26).
If the digital channel screen freezes, touch “TV/AV” and “MENU/OK” on
the TV’s touch sensor panel simultaneously for three or more seconds
to reset.
Change the direction of TV
Power lamp
ON: Lit
OFF: Unlit
Remote control
sensor
Eco Sensor
g“What is “Eco Sensor”?” (P. 34)
Note
Volume
Switch to an external input. (P. 21)
Switch between digital / analogue channels. (P. 21)
Change channel.
Menu operation.
Turn on / off (standby) the TV.
zYou will hear a beep if you have touched
the button correctly.
Names and functions of parts
LT-46DS9BJ_EN.book Page 6 Wednesday, April 9, 2008 2:08 PM

7
USE SETTING
TROUBLE?
PREPARE
IMPORTANT
To prevent scratches on the panel, lay a piece of soft cloth on an even
platform and place the TV onto it.
Be careful when handling the glossy finish of the TV
The glossy finish of the TV scratches easily.
zProtection films have been pasted onto the glossy finish of the TV to
prevent scratches. Peel off the films after the TV has been placed properly.
zIf the glossy finish gets dirty, clear the dust off the glossy finish first. Then
wipe softly with the cleaning cloth provided. If you do not clear the dust
first, or you wipe the glossy finish too hard, or a cleaning cloth other than
the one provided is used, the glossy finish may be scratched.
Attach the stand to the TV
1
2
When attaching the TV to the wall
Handling the glossy finish of the TV
Seal up the two holes at the
bottom of the TV using the plates
provided. Peel off the protection
films on the plates. Then peel the
plates from the paper and stick
them on the holes.
Glossy finish
LT-46DS9BJ_EN.book Page 7 Wednesday, April 9, 2008 2:08 PM

8
Please read P. 9 - 17 of this manual to set up your TV.
Follow the instructions on page 7 to attach the stand provided to the TV.
zPlace the TV on a flat and stable location.
Power requirements
zConnect the power cord only to a 220 - 240 V, 50 Hz AC outlet.

When attaching the TV to the wall, use the optional JVC wall mounting unit
zConsult a qualified technician.
zSee the included manual on mounting procedures.
zJVC assumes no responsibility for damage due to improper mounting.
zMounting holes for wall mounting unit:
M6 x 4, 400 mm x 200 mm
Depth of screw hole is 10 mm from the surface of the TV.
z
Seal up the two holes at the bottom of the TV with the plates provided. (P. 7)
Use two “AAA/R03” dry cell batteries. Insert the batteries from the -end,
making sure the +and -polarities are correct.
Check accessories
Install your TV
Installation requirements
zTo avoid overheating, ensure the
unit has ample room.
zTo prevent the TV from falling,
thread the belt through the hole on
the back of the stand and secure it
to the TV rack, etc.
INSTRUCTIONS
WIDELCD PANEL TV
LT-46DS9BJ
LT-42DS9BJ
TradeMarkof the DVB Digital Video Broadcasting
Project(1991to 1996) Number : 5226
User Manual
“INSTRUCTIONS”
(this book)
“AAA/R03” Batteries
(For confirming the TV
works)
Separate Manual
“WATCHING DIGITAL
CHANNELS”
Remote control
RM-C1931
Cleaning cloth
(For details on using the
cleaning cloth, see P. 7.)
USE TROUBLE?
SETTING
WATCHINGDIGITAL CHANNELS
Beforereading this manual
Readthe separate user manual (INSTRUCTIONS), “Warning”
(P.2),and understand how to use th e TV safely. After that follow the
instructionsin“Getting started” (P. 8)to connect the aerial and other
externaldevices to the TV, and configure the settings for the TV.
Digitalterrestrial broadcasting (DVB-T)
gDigitalchannels
Analogueterrestrial broadcasting (VHF / UHF) and
analoguecable TV
gAnaloguechannels
ThisTVcan receive digita l terrestrialbroadcasting (DVB-T)
intheUnited Kingdom. Digital terrestrial broadcasting
(DVB-T)receptionin other countries is not guaranteed.
Theon-screendisplays (inc luding DTV menus) are in
English.Noother languages are available.
Contents
Thismanual only provides information on
watchingdigital channels. Other information is
explainedinthe “INSTR UCTIONS”. Please read
boththis manual and the “INSTRUCTIONS”
manual.
Note
Watchingdigital channels...........................................................2
Displaytheprogramme information ....................................................4
Viewsubtitles......................................................................................4
Selectaudiolanguage ........................................................................ 5
Viewteletextinformation .....................................................................5
UsingEPG (Electronic Programme Guide)................................6
Customisingyour TV..................................................................8
EditPR(Edit PR List) ..........................................................................9
Timer.................................................................................................10
Configuration.....................................................................................12
Setup.................................................................................................13
Installation.........................................................................................14
Troubleshooting........................................................................16
Technicalinformation...............................................................17
zStand, stand cover, screws and
plates are also included. For
details, refer to page 7.
200 mm
150 mm 50 mm 150 mm 50 mm
Hole
Belt and screw (not provided)
Insert the batteries
Watch pay-TV digital channels
Subscribe to a broadcasting company beforehand.
A Viewing Card (B) will be sent by the
broadcasting company after subscribing to it. It
may be necessary for you to purchase a CAM
(Conditional Access Module) (A) in addition to the
Viewing Card.
Consult your broadcasting company or retailer.
AUnplug the power cord
BInsert “B” into “A”.
CInsert “A”.
DPlug the power cord, and turn the power on.
EPerform necessary settings using “Common
Interface”.
g
zPay-TV analogue channels cannot be
watched.
WARNING:
Batteries shall not be exposed to
excessive heat such as direct
sunshine, fire or the like.
WATCHING DIGITAL CHANNELS
“Common Interface” (P. 13)
AB
Getting started
LT-46DS9BJ_EN.book Page 8 Wednesday, April 9, 2008 2:08 PM

9
USE SETTING
TROUBLE?
PREPARE
IMPORTANT
Make sure all the devices and the TV are turned off.
The names of the devices shown in the following illustration are examples.
The alphabets A, B, C, D, E, F and G indicate the type of connections. Refer
to P. 10 - 11 to find the best connections that are possible with your devices.
zPlease read the user manuals of each device before setting up.
zConnecting cables are not supplied with this TV.
zYou can tidy the cables using the cable clamp on the back of the stand.
Connecting your external devices
Note
Audio system
Satellite broadcast tuner
VCR / DVD recorder
EXT-1 AUDIO
OUT
EXT-4
(HDMI 1)
EXT-5
(HDMI 2)
EXT-6
(HDMI 3)
Not available.
(For service adjustments)
CI (Common Interface) slot
Refer to “Watch pay-TV
digital channels” (P. 8)
HD Video camera
Digital Satellite broadcast tuner
DVD player
Video camera
Game consoles
Not available.
(For service adjustments)
DVD player
D
D
C/E
A/B
AA
G
F
EXT-2 EXT-3
Audio system
DIGITAL AUDIO OUT
Headphones
A
B
C
LT-46DS9BJ_EN.book Page 9 Wednesday, April 9, 2008 2:08 PM

10
Choose your best connection
You can connect your TV to other devices in different ways. Check your
devices and choose the best connection. In addition, please read “Notes”
before using.
Please do not change any of the menu settings before completing the “Initial
settings” (P. 13). Otherwise, the “Initial settings” will not start automatically.
Picture
quality Other devices Connecting cables Connect to your TV Available signals Notes
Best
A
HDMI HDMI cable
EXT-4
EXT-5
EXT-6
Input
zHDMI (digital)
SD: 576i (625i), 480i (525i)
ED: 576p (625p), 480p (525p)
HD: 1080i (1125i),
1080p (1125p) / 24Hz,
1080p (1125p) / 50Hz,
1080p (1125p) / 60Hz, 720p (750p)
Audio L / R
If there is no sound,
change the “HDMI-1
Audio Setting” (P. 30).
BDVI
Audio DVI-HDMI cable,
Audio cable
EXT-4
EXT-3: L and R jacks
Input
zDVI (digital)
ED: 576p (625p), 480p (525p)
HD: 1080i (1125i),
1080p (1125p) / 24Hz,
1080p (1125p) / 50Hz,
1080p (1125p) / 60Hz, 720p (750p)
zAudio L / R (analogue)
If there is no sound,
change the “HDMI-1
Audio Setting” (P. 30).
Better
C
Component
video and Audio
Component video cable,
Audio cable
EXT-3
Input
zComponent (analogue)
SD: 576i (625i), 480i (525i)
ED: 576p (625p), 480p (525p)
HD: 1080i (1125i), 720p (750p)
zAudio L / R (analogue)
Change the EXT-3
setting from “ ”
(composite) to “ ”
(component). (P. 31)
Getting started
LT-46DS9BJ_EN.book Page 10 Wednesday, April 9, 2008 2:08 PM

11
USE SETTING
TROUBLE?
PREPARE
IMPORTANT
D
SCART
(Euroconnector)
SCART cable
EXT-1
Input
zComposite video (analogue)
zRGB input (analogue)
zAudio L / R (analogue)
Output
zAnalogue TV out (composite video and
audio L/R) (analogue)
EXT-2
Input
zComposite video (analogue)
zS-Video (analogue)
zAudio L / R (analogue)
If you want to input the
S-Video signal, change
the “Ext Setting”. (P. 31)
Output
zDubbing out (composite video and audio
L/R) (analogue)
Select the dubbing
source in “Ext Setting”.
(P. 31)
Good
E
Video and audio
Video and audio cable EXT-3: V, L, R jacks
Input
zComposite video (analogue)
zAudio L / R (analogue)
Change the EXT-3
setting from “ ”
(component) to “ ”
(composite). (P. 31)
Audio system Connecting cables Connect to your TV Available signals Notes
F
Audio input Audio cable AUDIO OUT
Output
zAudio L / R (analogue)
You cannot listen to the sound from a
device with connection A and B.
G
Optical input Optical audio cable DIGITAL AUDIO OUT
Output
zAudio (digital)
(16 bit linear PCM or Dolby Digital)
The sound from the analogue channels
and the external devices cannot be
output.
Please refer to the ““Dolby Digital” output
from the DIGITAL AUDIO OUT terminal”
(P. 18) on the separate manual
“WATCHING DIGITAL CHANNELS”.
“Dolby” and the double-D symbol are
trademarks of Dolby Laboratories.
LT-46DS9BJ_EN.book Page 11 Wednesday, April 9, 2008 2:08 PM

12
Power supply for the indoor aerial
When using an indoor aerial which requires external power, set “Antenna
Power” to “On” in step 3of “Initial settings” (P. 13). The TV will supply DC 5V,
50mA (max) from the aerial socket through the cable to the aerial.
zSupplying power to outdoor and indoor aerials which does not require
external power, may cause damage to the aerial. If you are uncertain
whether the aerial needs external power, select “Off”.
zConnect the aerial directly to the TV. When a recording device is
connected between the aerial and the TV, power cannot be supplied to the
aerial.
zPower is supplied to the aerial only when the TV is on.
zYou can change the “Antenna Power” setting later.
For details, refer to “Antenna Power” (P. 13) on the separate manual
“WATCHING DIGITAL CHANNELS”.
Connecting the aerial
AERIAL
zAfter all the connections
have been made, insert the
plug into an AC outlet.
Connect the aerial
AERIAL
Connect a VCR / DVD recorder
zAfter all the
connections have
been made, insert
the plug into an AC
outlet.
VCR / DVD recorder
EXT-2
EXT-1
Getting started
LT-46DS9BJ_EN.book Page 12 Wednesday, April 9, 2008 2:08 PM

13
USE SETTING
TROUBLE?
PREPARE
IMPORTANT
I
n
i
The initial settings will begin automatically when the TV is turned
on for the very first time. Follow the on-screen instructions to
perform the settings.
1Turn on
zIf the remote control doesn’t work,
confirm that the mode is set to “TV”.
2Start initial settings
zIf the JVC logo does not appear, refer to “To perform initial
settings again” (P. 14).
3Set digital channels
1 Confirm “English” is set for on-screen displays and DTV
menus.
2 Confirm “United Kingdom” is set.
This TV can only receive British digital channels.
3 Confirm that the aerial power supply is set to “Off”.
Select “On” only when using an aerial which requires
external power. (P. 12)
4 Register digital channels
zIf “No services found” appears, press the “OK” button to
proceed to the next step to complete the other settings.
Then, refer to “No digital channels” (P. 14).
zYou can edit the digital channels after the initial settings.
For details, refer to “Edit PR (Edit PR List)” (P. 9) on the
separate manual “WATCHING DIGITAL CHANNELS”.
zSome digital channels cannot be watched on this TV.
For details, refer to page 17 on the separate manual
“WATCHING DIGITAL CHANNELS”.
4Confirm the language for menus (excluding the
DTV menus)
zIf you want to change the language, select a language and
press the “OK” button.
Initial settings
English
First Time Installation > Language Setting
Step 1: Please choose language
Language
Select
OK
Navigate
First Time Installation > Country Setting
Step 2: Please choose country
Country
Select
OK
Navigate
United Kingdom
Mode
Start Scan
On Off
Antenna Power
First Time Installation > Service Scan
Step 3: Please press OK
Select
OK
Navigate
Automatic
Service
Scan
_ _
Start Channel
_ _
Stop Channel
Add
Mode
Start Scan
First Time Installation > Service Scan
Step 3: Please press OK
Select
OK
Navigate
Automatic
Service
Scan
_ _
Start Channel
_ _
Stop Channel
Add
Mode
Start Scan
UHF33 : 3 Services found
BBC ONE
BBC TWO
BBC THREE
Scan completed! Store services?
Yes No
Suomi
Română
Türkçe
Language
Svenska
Norsk
Dansk
Nederlands
Castellano
Italiano
Deutsch
Français
English
Català
Português
Magyar
Polski
LCD
(Continue on page 14)
LT-46DS9BJ_EN.book Page 13 Wednesday, April 9, 2008 2:08 PM

14
5Set analogue channels
1 Register analogue channels
zIf you do not want to register the analogue channels (including cable
TV channels), press the “MENU” button to complete the settings.
zTo change the country setting, select a country and press the blue
button.
zIf “ACI Start” appears, start ACI. The cable channels will be
registered quickly. For details, refer to “What is “ACI” (Automatic
Channel Installation)?” (P. 34).
2 Check what was registered
To edit channels
g“Editing analogue channels” (P. 15)
6Finish
To the previous screen g
Exit g
To perform initial settings again
Take note that performing initial settings again will cause all channel
related settings and DTV menu settings to be lost. Press the “MENU”
button to display the menu, then press and hold the number button “1” for
more than 3 seconds to start initial settings. If initial setting does not start,
switch to the analogue channel and try again.
If you wish to make changes later, refer to “Service Scan” (P. 14) on the
separate manual “WATCHING DIGITAL CHANNELS” for digital channel
settings, or “Language” (P. 30) and “Auto Program” (P. 30) on this manual
for analogue channel settings.
No digital channels or “Missing or weak signal” message
appears
(blue)
Belgium
Nederland
Italia
España
France
Deutschland
United Kingdom
Country
Norge
Suomi
Sverige
Österreich
Danmark
Switzerland
Ireland
Auto Program
Auto Program
CH 21
0%
select a channel
BBC1
BBC2
ITV
CH4
CH5
_ _ _ _ _ _
_ _ _ _ _ _
AV
PR ID
Edit
CH
01 CH
02 CH
03 CH
04
05
06
07
CH
CH
CH
21
22
23
24
25
26
1Check the following points
zIs the TV connected correctly to the aerial?
zChange the direction of the indoor aerial.
zIs there a digital channels transmission tower nearby?
gTurn “Attenuator” to “On” (P. 30), since the radio waves are too
strong.
z“Attenuator” attenuates the radio waves of analogue broadcast as
well as those of digital broadcast. If some noise or snow appears
when watching an analogue channel, please set “Attenuator” to
“Off” temporarily.
zYou can check the broadcast signal level of the channel you are
watching. For details, refer to “Signal Check” (P. 15) on the
separate manual “WATCHING DIGITAL CHANNELS”.
2Set digital channels using “Factory Settings”. For details, refer to
“Factory Settings” (P. 15) on the separate manual “WATCHING
DIGITAL CHANNELS”.
If you still cannot watch digital channels after following the steps above,
there may be a problem with your aerial or its cable. Or, the signal may
be too weak. gConsult your retailer
N
Note
Getting started
LT-46DS9BJ_EN.book Page 14 Wednesday, April 9, 2008 2:08 PM

15
USE SETTING
TROUBLE?
PREPARE
IMPORTANT
You can edit the analogue channel list.
Editing analogue channels
1Switch to analogue channels
2Display the “Edit” menu
3Edit channels
To the previous menu
g
Exit
g
4Finish
TV/DTV
Aselect
Bnext Bnext
Aselect
Select “Set Up” Select “Edit/Manual” Display the menu bar
BBC1
BBC2
ITV
CH4
CH5
_ _ _ _ _ _
_ _ _ _ _ _
AV
PR ID
Edit
CH
01 21CH
02 22CH
03 23CH
04
05
06
07
24CH
25CH
26CH
select a
channel
Select channel Select edit function
ID
Insert Delete
Manual Move Next
Move Move a channel’s position (PR)
ID Edit a channel name (ID)
Insert Insert a new channel directly by entering the
CH/CC number
Delete Delete a channel
zPressing the button deletes the channel.
set
select
When selecting a preset name from the “ID List”
Bset
Aselect character
Bmove position
Cset
Aselect
enter the first
character (blue)
N
am
i
ng a c
h
anne
l
z“CH/CC” list g(P. 17)
Receives the
broadcast signal.
Enter a number
Select a “CH/CC”
In United Kingdom, you cannot
enter “CC” numbers. In Ireland,
you can select “CH” or “CC”
before entering a number.
(Continue on page 16)
LT-46DS9BJ_EN.book Page 15 Wednesday, April 9, 2008 2:08 PM

16
To edit digital channels
g
To register a digital channel manually
g
WATCHING DIGITAL CHANNELS
P. 9
WATCHING DIGITAL CHANNELS
“Service Scan” (P. 14)
Manual Register a new channel
zPress the red or green button. Auto-search begins, and the nearest
frequency is imported.
gRepeat the previous steps until the desired channel is displayed.
ASearch a channel Fine tune BSet
AV
PR ID
Manual
CH
01
02 22CH
03 23CH
04
05
06
07
24CH
25CH
26CH
BBC1
BBC2
ITV
CH4
CH5
_ _ _ _ _ _
_ _ _ _ _ _
21CH
Getting started
LT-46DS9BJ_EN.book Page 16 Wednesday, April 9, 2008 2:08 PM

17
USE SETTING
TROUBLE?
PREPARE
IMPORTANT
To use the “Insert” function (P. 15), find the “CH/CC” number corresponding to the TV’s Channel number from this table.
If you want to know a particular TV channel’s menu, look in TV listings magazines or contact the broadcaster.
zWhen the Country setting is “United Kingdom”, the CC number channels and channels from CH 02 to Ch 12 cannot be received.
CH Channel CH Channel CC Channel CC Channel
CH 02 E2, IR A CH 40 E40 CC 01 S1 CC 31 S31
CH 03 E3, IR B CH 41 E41 CC 02 S2 CC 32 S32
CH 04 E4, IR C CH 42 E42 CC 03 S3 CC 33 S33
CH 05 E5, IR D CH 43 E43 CC 04 S4 CC 34 S34
CH 06 E6, IR E CH 44 E44 CC 05 S5 CC 35 S35
CH 07 E7, IR F CH 45 E45 CC 06 S6 CC 36 S36
CH 08 E8, IR G CH 46 E46 CC 07 S7 CC 37 S37
CH 09 E9 CH 47 E47 CC 08 S8 CC 38 S38
CH 10 E10, IR H CH 48 E48 CC 09 S9 CC 39 S39
CH 11 E11, IR J CH 49 E49 CC 10 S10 CC 40 S40
CH 12 E12 CH 50 E50 CC 11 S11 CC 41 S41
CH 21 E21 CH 51 E51 CC 12 S12 CC 75 X
CH 22 E22 CH 52 E52 CC 13 S13 CC 76 Y
CH 23 E23 CH 53 E53 CC 14 S14 CC 77 Z
CH 24 E24 CH 54 E54 CC 15 S15 CC 78 Z+1
CH 25 E25 CH 55 E55 CC 16 S16 CC 79 Z+2
CH 26 E26 CH 56 E56 CC 17 S17
CH 27 E27 CH 57 E57 CC 18 S18
CH 28 E28 CH 58 E58 CC 19 S19
CH 29 E29 CH 59 E59 CC 20 S20
CH 30 E30 CH 60 E60 CC 21 S21
CH 31 E31 CH 61 E61 CC 22 S22
CH 32 E32 CH 62 E62 CC 23 S23
CH 33 E33 CH 63 E63 CC 24 S24
CH 34 E34 CH 64 E64 CC 25 S25
CH 35 E35 CH 65 E65 CC 26 S26
CH 36 E36 CH 66 E66 CC 27 S27
CH 37 E37 CH 67 E67 CC 28 S28
CH 38 E38 CH 68 E68 CC 29 S29
CH 39 E39 CH 69 E69 CC 30 S30
“CH/CC” list
LT-46DS9BJ_EN.book Page 17 Wednesday, April 9, 2008 2:08 PM

LCD
18
Enjoy your new TV!
19
PAGE
Watching analogue
channels
20
PAGE
Change the aspect ratio
Change the sound mode or language
3D Cinema Sound
Emphasize the bass sound
Set the sleep timer
22
PAGE
Useful functions
Viewing teletext on
the analogue channel
Picture settings
(Picture Mode, Features, etc.)
Sound settings
(Stereo/t-u, 3D Cinema Sound,
etc.)
Set Up settings
(Auto Program, Language, etc.)
Features settings
(Sleep Timer / Child Lock, etc.)
Customising your TV
26
PAGE
Watching videos / DVDs
Picture
Watching digital
channels
WATCHING DIGITAL CHANNELS
P. 2 - 5
Customising your TV
DTV menu settings
WATCHING DIGITAL CHANNELS
P. 8 - 1 5
21
PAGE
PR List
09
08
07
06
05
04
03
02
01 BBC1
BBC2
ITV
CH4
CH5
_ _ _ _ _ _
_ _ _ _ _ _
AV
PR ID
LT-46DS9BJ_EN.book Page 18 Wednesday, April 9, 2008 2:08 PM