JWA Benton Queen 68221 User manual

ASSEMBLY INSTRUCTION
ITEM CODE 68221
Benton Queen Headboard
Imported by JWA Furniture Pty Ltd, Qld, Brisbane Australia.
For any assistance with assembly or for missing parts please refer to your receipt

Allow 15 min For 2 person Additional tools
required
1
PRE-ASSEMBLYPREPARATION
Before you start:
1. Choosea clean, level, spacious assembly area. Avoid hard surfaces thatmay
damagethe product
2. Take carewhen lifting. Product should be assembled as near as possibleto the
point of use
3. Ensurethat you have all required contents for completeassembly
4. Always read the assembly instructions carefully beforebeginning assembly.
5. Keep all hardware parts and packaging out of reach of small children.
6. Do not over tighten the screws and bolts as this may damagethe threads
7. Assembly is to be carried out by a competent adult(s) ONLY
8. During assembly, children should be kept away from the product dueto possible
risk to injury.
9. Do not use this item if any components are missing or damaged.
10. Please keep the instructions for futurereference.

PARTS LIST
M6 x 19 X4 M4 x 60 X1 M6 x 30 X4 M4 x 30 X2
Part Item QTY
1 Headboard 1
2 Brackets 2
2

3
•Prepare a floor or benchtop with a protective blanket or carboard.
•Stand the headboard(1) upside down, with the bolt holes on the top
end.
•Attach the 2x bracket(2) to bedhead(1).
•Secure each brackets with 2x Bolts(C) threaded through washer(A).
•Fasten with Allen Key(B)
STEP 1:

4
•Use a Philips head screw driver to fasten a screw(D) into each bracket as
shown below.
STEP 2:
ASSEMBLY IS COMPLETE

REGULAR CARE:
•Protect from directsunlight
•Vacuum regularly using low suction
•Rotate reversible cushions regularly
CLEANING:
•Donot removecushion covers for separate cleaning even though they
may have zippers
•Donot wash, Do not dry clean, Donot shampooclean
•Clean with hot water extraction machine. Professional cleaning
recommended
•Do not use dishwashing liquid or laundry detergent
•Use only upholstery detergents
•Do not wet filling
•Dry in shade away from direct heat andsunlight
•Allow to dry thoroughly beforere-use
SPOT CLEANING:
•Do not rub
•Do not spot clean with anysolvent
•Treat spills and stains as soon aspossible
•Gently scrapeoffany soil or mop any liquid from the surface of the fabric
•Applyproprietary cleaning agents strictly according to instructions to
remove the residue of the spill
•Donot saturate the fabric or interior with water or other cleaning liquids
WARNING:
Applyonly water-based soil resist (fabric protection) treatments. Do not
use aerosol products
* PILLINGISNOTAFABRIC DEFECTORFAULTAND ISNOT
COVERED BYWARRANTY
* PILLING IS A NORMAL OCCURRENCE CAUSED BY WEAR AND TEAR AND DOES
NOT AFFECT THE DURABILITY ORFUNCTIONALITY OF THE FABRIC AND ISEASILY
REMOVED
5