JWA Cara 71525 User manual

1
Imported by JWA Furniture Pty Ltd, Qld, Brisbane Australia.
For any assistance with assembly or for missing parts please refer to your receipt
ASSEMBLY INSTRUCTION
Cara
ITEM CODE:71525
Dining table

2
PRE-ASSEMBLY PREPARATION
Before you start:
1. Choose a clean, level, spacious assembly area. Avoid hard surfaces that may damage
the product
2. Take care when lifting. Product should be assembled as near as possible to the point of
use
3. Ensure that you have all required contents for complete assembly
4. Always read the assembly instructions carefully before beginning assembly.
5. Keep all hardware parts and packaging out of reach of small children.
6. Do not over tighten the screws and bolts as this may damage the threads
7. Assembly is to be carried out by a competent adult(s) ONLY
8. During assembly, children should be kept away from the product due to possible risk to
injury.
9. Do not use this item if any components are missing or damaged.
10. Please keep the instructions for future reference.
Allow 45 min For 2 person

3
PARTS LIST
①table top
②connection metal
③table frame

•Insert bolt A into Flat Washer C with Allen Key E to
connect the four Table frame ③with the connection
metal ②. Loosely tighten for now.
4
STEP 1:
③
③
③
③
②

•Insert bolt B into Flat Washer D with Allen Key E to
connect the table frame ③with table top ①. Loosely
tighten for now.
5
STEP 2:
•Stand the table, top side up. Place is on a level surface.
Adjust the legs until the table is level. Now go around
and firmly tighten all the bolts.
STEP 3:
①
③
③
③
③

6
ASSEMBLY OF THE TABLE IS COMPLETE

7
PRODUCT CARE:
As our timber is supplied from sustainable forests there will be natural variations in
surface texture and grain like knots, mineral streaks and sap runs that may affect
the finish. These differences in character are not defects, but distinctions that
make each piece of furniture unique
Our furniture is built to last. Following these steps for basic care should protect
your investment for years to come
•Dust frequently with a clean damp lint-free cloth. This will help
remove abrasive build up which can damage a finish over time
•Do not place hot objects on any furniture surface. Always use a hot
plate or placemat. Laminate and lacquer finishes on table tops
provide added scratch and heat resistance to our furniture, but they
can still be damaged without proper care
•Avoid exposing your furniture to strong sunlight, heat outlet, open
windows or dampness. Prolonged exposure to direct sunlight can
fade the finish of your furniture, while extreme temperature and
humidity changes can cause cracking or splitting
•Do not expose your furniture to any liquids. Never allow water to sit
on your furniture. Alcohol, nail polish and perfume are also
dangerous as they will dissolve the lacquer finish on contact and
may require professional repairs
•Do not allow plastic to come in direct contact with your furniture.
Chemicals in the plastic of placemats etc. may soften and mark the
finish if left in contact with the furniture for a period of time