JWA REIGN 68030 User manual

INSERT PAGE NUMBER
Imported by JWA Furniture Pty Ltd, Qld, Brisbane Australia.
For any assistance with assembly or for missing parts please refer to your receipt
ASSEMBLY INSTRUCTION
REIGN
68030
Upholstered Storage Bench

Allow 30 min For 2 person
PRE-ASSEMBLYPREPARATION
Before you start:
1. Choose a clean, level, spacious assembly area. Avoid hard surfaces that may
damage the product
2. Take care when lifting. Product should be assembled as near as possible to the
point of use
3. Ensure that you have all required contents for complete assembly
4. Always read the assembly instructions carefully before beginning assembly.
5. Keep all hardware parts and packaging out of reach of small children.
6. Do not over tighten the screws and bolts as this may damage the threads
7. Assembly is to be carried out by a competent adult(s) ONLY
8. During assembly, children should be kept away from the product due to possible
risk to injury.
9. Do not use this item if any components are missing or damaged.
10. Please keep the instructions for future reference.
1

(A) M8X19 x8 (B) M5X100 x1 (C) M8X50 x8
Part
Item
QTY
1
Bench
1
2
Arm
s
2
3
Feet
4
1
3
3
2
3
3
2
PARTS LIST
2

3
•Prepare a floor with a blanket or cardboard.
• Lay the Bench(1) with it’s base on the ground. Open the
lid.
•Attach the 2 x Arms(2) to the bench(1) as shown below.
•Use 2 x bolts(C) threaded through washers(A) per arm.
•Fasten with Allen Key(B)
STEP1:

4
ASSEMBLY IS COMPLETE
•Flip the bench with a 2nd person, base facing up.
•Screw 4 x legs(3) into the bench.
STEP2: