JWA HARMON 74690 User manual

Imported by JWA Furniture Pty Ltd, Brisbane Qld, Australia.
For any assistance with assembly or for missing parts please refer to your receipt
1
ASSEMBLY INSTRUCTION
ITEM CODE 74690
HARMON BUFFET

Allow
6
0min For2person Additional toolsrequired
PRE-ASSEMBLY PREPARATION
Before you start:
1. Choose a clean, level, spacious assembly area. Avoid hard surfaces that may
damage the product
2. Take care when liing. Product should be assembled as near as possible to the
point of use
3. Ensure that you have all required contents for complete assembly
4. Always read the assembly instrucons carefully before beginning assembly.
5. Keep all hardware parts and packaging out of reach of small children.
6. Do not over ghten the screws and bolts as this may damage the threads
7. Assembly is to be carried out by a competent adult(s) ONLY
8. During assembly, children should be kept away from the product due to possible
risk to injury.
9. Do not use this item if any components are missing or damaged.
10. Please keep the instrucons for future reference.
2

8mm
3

PARTSLIST
A
30pcs
M6x40mm
BCEF
Q
30pcs
15x12mm
30pcs
8x30mm
1pc
M4 M7x50
6pcs
14pcs
12pcs 1pc
H
V3
M4x35
4
I2
I2=2pcs
V2=12pcs
I3
I3=4pcs
V2=24pcs
L
12pcs

15A
15A
15B
1
2
3
4
5
6
7
8
9
9
10
11
11
12
13
13
14
16
16
17
18
17
5

A=30
1
2
3
4
5
5
6
6
8
8
STEP 1:Fix dowel (B) and cam pin (A) to panel (1) (2) (3) (4) (5)
(6) (8).
6

5
6
10
5
10
6
8
7
STEP 2: Fix panel (5) (6) to panel (10) with cam lock (C).
STEP 3: Fix panel (5) (6) to panel (8) with cam lock (C).

4
7
1
14
13
13
8
STEP 4:Fix panel (3) (4) (7) to panel (8) with cam lock (C).
Fix panel (9) to panel(3) (4) (5) (6) with cam lock (C).
9
9
10
STEP 5: Insert panel (13) (14) into grooves between panel (1) (3)
(4) (5) (6) (8). Fix panel (1) to panel (3) (4) (5) (6) (9) (10)
with cam lock (C).
8
9
9
10

16
16
17
17
18
42
3
1
5
7
68
Q=6
H=1
8
1
5
4
V3=14
3
67
2
9
STEP 6: Fix panel (2) to panel (3) (4) (7) with screw (Q).
STEP 7: Fix panel (16) (17) (18) to panel (2) with screw (V3).

L=12
1
2
3
4
5
6
8
STEP 8:Insert the shelf support (L) into the panel (3) (4) (5) (6),
as shown.
10
1
2
3
4
5
611
11
12
STEP 9:Put the panel (11) (12) on the shelf support.