JWA EMBER 68016 User manual

INSERT PAGE NUMBER
Imported by JWA Furniture Pty Ltd, Qld, Brisbane Australia.
For any assistance with assembly orfor missing parts please refer to yourreceipt
ASSEMBLY INSTRUCTION
EMBER
68016
UpholsteredBench

Allow 30 min For 1 person
PRE-ASSEMBLY PREPARATION
Before you start:
1. Choose a clean, level, spacious assembly area. Avoid hard surfaces that may
damage the product
2. Take care when lifting. Product should be assembled as near as possible to the
point of use
3. Ensurethat you have all required contents for complete assembly
4. Always read the assembly instructions carefully before beginning assembly.
5. Keep all hardware parts and packaging out of reach of small children.
6. Donot over tighten the screws and bolts as this may damage the threads
7. Assembly is to be carried out by a competent adult(s) ONLY
8. During assembly, children should be kept away from the product due to possible
risk to injury.
9. Donot usethis item if any components are missing or damaged.
10.Please keep the instructions for future reference.
1

PARTS LIST
2
12

3
•Preparea floor or benchtopwith a blanket or cardboard.
•Lay the Bench(2)down,bottom facing up.
•Prepare8 bolt sets. Thread Bolt(A)throughspring washer(C)and
washer(B),as shownbelow.
•Attach 2 x Legs(1),as shownbelow.With 2 x bolt sets per let.
•Fastenwith Allen Key(D)
STEP1:
ASSEMBLY IS COMPLETE