JWA 68026 User manual

ASSEMBLY INSTRUCTION
SAGE OFFICECHAIR
68026/70133/70134/74639
Imported by JWAFurniture Pty Ltd, Qld, BrisbaneAustralia.
For any assistance with assembly or for missing parts please refer to your receipt
1

PRE-ASSEMBLY PREPARATION
Before you start:
1.Choose a clean, level, spacious assembly area. Avoid hard surfaces that may damage the product
2.Take care when lifting. Product should be assembled as near as possible to the point of use
3.Ensure that you have all required contents for complete assembly
4. Always read the assembly instructions carefully before beginning assembly.
5. Keep all hardware parts and packaging out of reach of small children.
6. Do not over tighten the screws and bolts as this may damage the threads
2

PARTS LIST
A
M6x20MM
X4
B
X1
1
Chair body
2
Seat pate
3
Gas lift
cover
4
Gas lift
5
Base
6
Castors
1
2
4
5
6
3
3

STEP 1:
1
2
34
5
6
STEP 2:
Use bolts (A) to fix the seat plate ②onto the chair body ①.
B
Ax4
a. Push all the five castors ⑥into the underside of the base ⑤.
b: Insert the gas lift ④into the base ⑤.Use gas lift cover ③to cover the gas lift ④.
4

ASSEMBLY ISCOMPLETE
1
STEP 3:
Carefully locate the
chair body ①onthe
base unit.
5

6
REGULAR CARE:
•Protect from direct sunlight
•Vacuum regularly using lowsuction
•Rotate reversible cushions regularly
•Avoid exposure to new clothing, cushions or throws as this may lead
to dye transfer and permanentstaining
CLEANING:
•Do not remove cushion covers for separate cleaning even though they
may have zippers
•Do not wash, Do not dry clean, Do not shampoo clean
•Clean only with hot water extraction machine. Professional cleaning
recommended
•Do not use dishwashing liquid or laundry detergent. Use only
upholstery detergents
•Do not wet filling
•Dry in shade away from direct heat and sunlight
•Allow to dry thoroughly beforere-use
SPOT CLEANING:
•Do not rub
•Do not spot clean with anysolvent
•Treat spills and stains as soon as possible
•Gently scrape off any soil or blot any liquid from the surface of the
fabric before applying cleaner
•Apply proprietary cleaning agents strictly according to instructions
to remove the residue of thespill
•Do not saturate the fabric or interior with water or other cleaning
liquids
WARNING: Apply only water-based soil resist (fabric protection)
treatments. Do not use aerosolproducts
*PILLING IS NOT A FABRIC DEFECT OR FAULT AND IS NOT COVERED
BY WARRANTY
*PILLING IS A NORMAL OCCURRENCE CAUSED BY WEAR AND TEAR
AND DOES NOT AFFECT THE DURABILITY OR FUNCTIONALITY OF
THE FABRIC AND IS EASILYREMOVE