JWA HOFFMAN 73679 User manual

ASSEMBLY INSTRUCTION
HOFFMAN Coffee Table
ITEM COD E 73679
Imported by JWA Furniture Pty Ltd, Brisbane Qld Australia.
For any assistance with assembly or for missing parts please refer to your receipt
2021-09-15 1 item code:73679
310

Allow 30 min For 2 person
2021-09-15 2item code:73679
PRE-ASSEMBLY PREPARATION
Before you start:
1. Choose a clean, level, spacious assembly area. Avoid hard surfaces that may
damage the product
2. Take care when liing. Product should be assembled as near as possible to the
point of use
3. Ensure that you have all required contents for complete assembly
4. Always read the assembly instrucons carefully before beginning assembly.
5. Keep all hardware parts and packaging out of reach of small children.
6. Do not over ghten the screws and bolts as this may damage the threads
7. Assembly is to be carried out by a competent adult(s) ONLY
8. During assembly, children should be kept away from the product due to possible
risk to injury.
9. Do not use this item if any components are missing or damaged.
10. Please keep the instrucons for future reference.
Addional tools required

2021-09-15 3 item code:73679

PARTS LIST
1
2
3
4
5
6
TOP PANEL
BOTTOM PANEL
SIDE PANEL
MIDDLE PANEL
DRAWER SIDE PANEL
DRAWER FRONT
7
8
9
10
11
12
34
MIDDLE PANEL
Standing Water
Short standing water
DRAWER SIDE PANEL
DRAWER BASE
DRAWER BACK PANEL
2021-09-15 4 item code:73679
N1PCS
M4*35mm M3.5*14mm
26

2021-09-15 5 item code:73679
Fix panel (3) to panel (2) with cam lock (B).

2021-09-15 6item code:73679
Fix panel (4) to panel (3) with cam lock (B).
Fix dowel (E) and cam pin (A) to panels (1).

2021-09-15 7 item code:73679
Fix panel (1)to panel (5) with cam lock (B).
Attach panel (5) to panel (2)(3)(4)with screw (D)
Turn screw (D) clockwise to tighten using allen key
(M), as shown.

2021-09-15 8item code:73679
Attach metal leg (6) (7) with cam lock (B).
Attach metal leg (6)(7) to bottom panel (5) with cam lock(B).

2021-09-15 9item code:73679
Insert cam pin(A)and screw(G) into panel (2).
Connect the three panels(9)(10)(11)
together with screw(H).
Insert panel(12) into groove.
Screw runner to the sides of the drawers.

11
2021-09-15 10 item code:73679

SAFETY BRACKETS
INSTRUCTIONS
1. Attach one Mounting Plate to the wall with the Large Screws. Make sure to
attach the Mounting Plate into a stud. If mounting into brick or masonry you
will need to acquire wall anchors.
2. Attach the second Mounting Plate to the furniture frame with the Short
Screws.
3. Move the furniture to its final position. Thread a Wall Strap through the both
Mounting Plates and tighten until snug. Do not over tighten.
4. Make sure that the Mounting Plates are firmly attached to the wall and
furniture and that the Wall Strap is snug.
HARDWARE
Wall
Back side
Wall Strap x 1Mounting Plate x 2 Large Screw x 2 Small Screw x 2
x 2
N
2021-09-15 11item code:73679

To protect your furniture, we suggest the following:
• Avoid placing your furniture in direct sunlight.
• Do not place furniture directly under windows.
• Do not place sharp materials (knife, fork, etc.) directly onto
your furniture as sharp material may scrape and damage the
finish.
• Do not place material with high temperature directly onto the
surface of your furniture.
• Clean up spills quickly. Water left over a prolonged period of
time may cause damage. Alcohol, perfume, nail polishes,
aftershave and some medication may cause severe finish
damage if not cleaned immediately.
• Use a clean, soft, dry, lint free absorbent cloth to clean your
furniture. Do not use any detergent as they may contain
ingredients that may react and damage the finish.
NOTE: If the above care advise is not adhered to your product
warranty may become void
2021-09-15 12 item code:73679