JWA OLTA 69738 User manual

1
ASSEMBLY INSTRUCTION
ITEM CODE 69738
OLTA COFFEE TABLE
Imported by JWA Furniture Pty Ltd, Qld, Brisbane Australia.
For any assistance with assembly or for missing parts please refer to your receipt
472MM
540MM 1000MM

Allow 30 min For 1 person Addional tools required
2
PRE-ASSEMBLY PREPARATION
Before you start:
1. Choose a clean, level, spacious assembly area. Avoid hard surfaces that may
damage the product
2. Take care when liing. Product should be assembled as near as possible to the
point of use
3. Ensure that you have all required contents for complete assembly
4. Always read the assembly instrucons carefully before beginning assembly.
5. Keep all hardware parts and packaging out of reach of small children.
6. Do not over ghten the screws and bolts as this may damage the threads
7. Assembly is to be carried out by a competent adult(s) ONLY
8. During assembly, children should be kept away from the product due to possible
risk to injury.
9. Do not use this item if any components are missing or damaged.
10. Please keep the instrucons for future reference.

3
PARTS LIST
A
18pcs
B
18pcs
C
30pcs
M8X30mm
M3.5X14mm
M14.8X12mmM7X39mm
M4X14mm
D
F G H
14pcs
M5X40mm
4pcs 24pcs 4pcs
CR DL
2pcs 2pcs
E
I
20pcs
2pcs
1pcs
1
2
3
4
5
6
7
8
9
10
11
12
13
14
DR
CL
2pcs
× 2
814
11
2
1
3
4
5
6
7
9
12 10
13
SIDE PANEL
SIDE PANEL
MIDDLE PANEL
MIDDLE PANEL
SHELF
BOTTOM PANEL
TOP PANEL
DRAWER FRONT
DRAWER FRONT
BACK PANEL
DRAWER SIDE PANEL
DRAWER SIDE PANEL
DRAWER BACK PANEL
DRAWER BASE
M4x30mm M3.5x14mm

4
STEP 1:
STEP 2:
G
CL
3
GCR
3
GCR
2
CL
AA
1
G
CL
G
CR
G
CR
G
CL
AAA
A
D
C
4
4
5
Fix runners (CL)(CR) to panels (1)(2)(3) with screws (G).
Fix cam pin (B) to panels (1)(2)(3).
Fix cam pin (B) to panel (4).
Aach panel (5) to panel(4) with dowel(A)and screws (D).

5
STEP 3:
STEP 4:
B
B
C
4
5
39
B
C
4
2
1
C
BB
Aach panels (3) (9) to panel(4) with dowel(C)and
cam lock (B).
Aach panels (1) (2) to the body with dowel(C)and
cam lock (B).

6
STEP 5:
STEP 6:
DD D D
CC
C
6
9
A A A
C
7
1 2
BB
B
C
C
7
Aach panel (6) to the body with screws (D).
Fix cam pin (A) to panel (7).
Aach panel (7) to the body with dowel(C)and
cam lock (B).

7
STEP 7:
STEP 8:
6
F
E
6
H
H
HH
EEE
E
Fix metal plate(F) to panel(6) with screws (E).
Fix legs (H) to panel(6).

8
STEP 9:
STEP 10:
AA
B
B
DL
DR
G
G
C
11
8 14
8 14
8 14
D
D
C
10
X2
X2
11
12
13
Aach panels (10)(11) to panel(12) with screw(C)
and screws (D).
Insert drawer base as shown.
Fix cam pin (A)to panels (8)(14).
Aach drawer front to the body with cam lock parts.

STEP 11:
9
ASSEMBLY COMPLETE
8 14
814
Assemble drawers to the body.

10
SAFETY BRACKETS
INSTRUCTIONS
1. Attach one Mounting Plate to the wall with the Large Screws. Make sure to
attach the Mounting Plate into a stud. If mounting into brick or masonry you
will need to acquire wall anchors.
2. Attach the second Mounting Plate to the furniture frame with the Short
Screws.
3. Move the furniture to its final position. Thread a Wall Strap through the both
Mounting Plates and tighten until snug. Do not over tighten.
4. Make sure that the Mounting Plates are firmly attached to the wall and
furniture and that the Wall Strap is snug.
HARDWARE
Wall
Back side
Large Screw x 2Wall Strap x 1Mounting Plate x 2 Small Screw x 2
I