JWA FABIAN 69765 User manual

1
Imported by JWA Furniture Pty Ltd, Qld, Brisbane Australia.
For any assistance with assembly or for missing parts please refer to your receipt
ASSEMBLY INSTRUCTION
FABIAN
69765
GREY QUEEN BED

Allow 45 min For 2person Additional tools required
PRE-ASSEMBLY PREPARATION
Before you start:
1. Choose a clean, level, spacious assembly area. Avoid hard surfaces that may
damage the product
2. Take care when lifting. Product should be assembled as near as possible to the
point of use
3. Ensure that you have all required contents for complete assembly
4. Always read the assembly instructions carefully before beginning assembly.
5. Keep all hardware parts and packaging out of reach of small children.
6. Do not over tighten the screws and bolts as this may damage the threads
7. Assembly is to be carried out by a competent adult(s) ONLY
8. During assembly, children should be kept away from the product due to possible
risk to injury.
9. Do not use this item if any components are missing or damaged.
10. Please keep the instructions for future reference.
2

3
PARTS LIST
Part ltem QTY Part ltem QTY
1Headboard 1 2 Rail 1
3Rail 1 4 Rail 1
5Rail 1 6 Footboard 1
7
Center slat
rail 2 8 Support leg 1
9Support leg 210 Support leg 2
11
Slat
112 Leg 4

STEP 1:
4
STEP 2:

5
STEP 4:
STEP 3:

6
STEP 5:
STEP 6:

7
STEP 7:
ASSEMBLY IS COMPLETE

8
REGULAR CARE:
•Protect from direct sunlight
• Vacuum regularly using low suction
•Rotate reversible cushions regularly
CLEANING:
•Do not remove cushion covers for separate cleaning even though
they may have zippers
•Do not wash, Do not dry clean, Do not shampoo clean
•Clean with hot water extraction machine. Professional
cleaning recommended
•Do not use dishwashing liquid or laundry detergent
•Use only upholstery detergents
•Do not wet filling
•Dry in shade away from direct heat and sunlight
•Allow to dry thoroughly before re-use
SPOT CLEANING:
•Do not rub
•Do not spot clean with any solvent
•Treat spills and stains as soon as possible
•Gently scrape off any soil or mop any liquid from the surface of the
fabric
•Apply proprietary cleaning agents strictly according to instructions
to remove the residue of the spill
•Do not saturate the fabric or interior with water or other cleaning liquids
WARNING:
Apply only water-based soil resist (fabric protection) treatments. Do
not use aerosol products
* PILLING IS NOT A FABRIC DEFECT OR FAULT AND IS
NOT COVERED BY WARRANTY
*PILLING IS ANORMAL OCCURRENCE CAUSED BY WEAR AND TEAR AND DOES
NOT AFFECT THE DURABILITY OR FUNCTIONALITY OF THE FABRIC AND IS EASILY
REMOVED