K-array Redline KR100S User manual

USER'S MANUAL ENGLISH
K
array
KR100S
K-array is the new voice that sings aloud, "outside the
chorus", and whose performance is better than any
other products. Born on-the-road, in the PA world,
where you get no discount, you have to give your
best as fast as you can, often with a "compressed"
budget, K-Array systems have been designed to
give precise answers to precise needs.
K-Array systems are driven by new generation
digital engines, with power/dimension/weight
ratios that are ten times better than any other
professional products; these systems can be
remotely controlled and come with a lot of
on-board software.
K-array systems can shape their
performance following your taste and
needs. Inside K-array systems you will
find something that only K-array can
offer: the best in technology, proudly
conceived, designed and produced in
Italy. If they were cars, they would be
Ferrari.
Don't agree to pay for a simple
brand, claim performance, and don't
believe those who maintain that
these products are only for few
people, the only truth is that K-
array systems are unique, but
affordable and within
everybody's reach!
HP Sound Equipment
The is a high performance ultra-slim powered two
way system designed for use with small to medium wavefront
systems, in both mobile and install applications. The
includes two KL12ma powered subwoofers and 2
KR100 1mt line array satellites.
features a 1000 watt 12" drive unit with magnet
structure and suspension engineered for maximum linear
excursion.
The ultra-light reflex cabinet is fitted with two pocket handles and
one 35mm pole mounting point for easy installation with every
satellite speaker on it. It features large area porting to reduce air noise.
ultra-slim satellite features a line array of 2" high
efficiency drive units with neodymium magnet structure and suspensions
engineered for maximum linear excursion and minimum noise problems.
The ultra-strong chassis ensures high resistance and durability also with
hardest work conditions.
KR100 S
KR100 S
KL12m a
KR100 S
KR100 S
The
The
All the components are designed by
R&D department and custom made under control
quality system.
K-arr ay K-array
SAFETY INSTRUCTIONS
• To reduce the risk of electric shock, disconnect the loudspeaker from the AC mains
before installing audio cable. Reconnect the power cord only after making all signal
connections.
• Connect the loudspeaker to a two-pole, three wire grounding mains receptacle. The
receptacle must be connected to a fuse or circuit breaker. Connection to any other type of
receptacle poses a shock hazard and may violate local electrical codes.
• Do not install the loudspeaker in wet or humid locations without using weather
protection.
• Do not allow water or any foreign object to get inside the loudspeaker. Do not put objects
containing liquid on, or near, the unit.
• To reduce the risk of overheating the loudspeaker, avoid exposing it to direct sunlight. Do not
install the unit near heat emitting appliances, such as a room heater or stove.
• This loudspeaker contains potentially hazardous voltages. Do not attempt to disassemble the
unit. The unit contains no user serviceable parts. Repairs should be performed only by factory
trained service personnel.
REV03

Amplifier panel
PRESET
keep pressed
for preset lock
INPUT
PARALLEL
OUT
INPUT
(balanced)
GROUND
LIFT
ON LIMIT
LINK
LINK
(parallel)
POWER
ON
ATTENTION!:
READ MANUAL FOR
CORRECT
PRESET SELECTION
1+ POSITIVE OUT
1- NEGATIVE OUT
2+ N.C.
2- N.C.
REMOTE
DSP
POWER
OUTPUT
ANALOG
POWER SUPPLY
INPUT
PAD
dB
0
0.5 34
5
6
9
12
18
35
0
0
RS485
ADDRESS
MADE IN ITALY
WARNINGS:
To ensure correct operation,
allow at least
20 cm clearance from
back surface and correct
ventilation. To reduce risk of
electric shockdo not remove
cover. No operatoror serviceable
parts inside. Refer servicing to
qualified personnel. To reduce the
risk of fire or electric shock do
not expose this appliance to
rain or moisture.
CAUTION
RISK OF ELECTRICAL SHOCK
DO NOT OPEN!
DO NOT EXPOSE
TO RAIN OR MOISTURE!
ATTENTION
RISQUE DE CHOC ELECTRIQUE
NE PAS ENLEVER!
is a product of
viale Roma 7/i, 50037 S.Piero a Sieve
Firenze ITALY Tel + 39 055 8487222
HP Sound Equipment srl
ID12
PRESET
I
0
PUSH
Balanced XLR
In \ Out parallel
RS485 connection
for remote control
Ground lift switch
Input pad level
Preset change button
Keep it pressed 10sec.
to store preset as default
ID number for remote
control
Speakon power output.
To use with KR100
satellite or with KL12
passive subwoofer
PowerCon Input
PowerCon parrallel
Output
Preset loaded
REV03

REV03
horizontal
500 Hz
250 Hz
8 KHz
4 KHz
1 KHz
500 Hz
250 Hz
8 KHz
4 KHz
1 KHz
90°
120° 60°
30°
-30°
-60°
150°
-90°
180°
-150°
-120°
0° front
back
vertical
90°
120° 60°
30°
-30°
-60°
150°
-90°
180°
-150°
-120°
0°
front
back
KR100S
Acoustics
Speaker power handling 500(sub) + 250(sat) W(AES)
Max power 1000(sub) + 600(sat) W 1
Impedance 4Ω(sub) + 8Ω(sat)
Frequency range 40Hz - 19 KHz +/- 3dB (preset relating)
SPL 1W / 1mt 98.5 dB (sub) 98 dB (sat) 2
Maximum SPL 124dB continuous - 130 dB peak
Coverage
Horizontal 100°
Vertical 7°
Crossover
Type DSP controlled
Frequency 150 Hz
Transducers
Low frequency 1 x 12” Neodymium speakers with 3” voice coil
High frequency 16 x 2” Neodymium speakers with 0,75” voice coil
Audio Input
Connectors male + female parallel 3-pin balanced XLR
Wiring Pin1 = ground - Pin2 = hot - Pin3 = cold
Power Audio Output
Connector 4-pin Female Speakon
Wiring Pin1+= CH1+ Pin1= CH1- Pin2+= N.C. Pin2= N.C.
Remote control Input
Connectors 1 x female 8 poles RJ45
Power Input
Connectors 2 x PowerCon IN/OUT
Type 1 modules class D - DSP controlled
Subwoofer power 750 Watt 3 @4Ω
Satellite power output 750 Watt 3 @4Ω
Protection Dynamic limiter, over current, over temp, short circuits
AC power
Operating range 210 - 240 Vac 50Hz (Default)
100 - 120 Vac 60Hz (Selectable)
I. nom 3.6 A / 115 Vac - 2.2 A / 230 Vac
Minimum operation voltage 95 Vac - 195 Vac
Maximum operation voltage 125 Vac - 205 Vac
Max continuos and
burst current
Default 6A(>10 sec) - 12A (<1 sec)
Selectable 10A(>10 sec) - 20A (<1sec)
Physical
Dimensions KL12ma: 32.5 x 33.5 x 43.5 cm (12.91” x 13.19” x 17.13”)
KR100: 5.7 x 120.5 x 7.4 cm (2.17” x 47.44” x 2.91”)
Weight KL12ma: 15 Kg (33.07 lbs) KR100: 4.4 Kg (9.7 lbs)
DISPERSION GRAPHS
Notes for data
1. Maximum RMS applicable power for a musical signal, the
reference signal is the one proposed by EIAJ standard.
2. Measured @4 mt then scaled @1 mt
the nominal load impedance.
New materials and design are introduced into existing products
without previous notice. Present systems may differ in some
respects from those presented in this brochure.

Presets
Clear
MCSB Music
Back Live
Dark
HP60 L i- 3Cl-3
Li-6Cl-6
- To upload new presets on the KL12ma it's needed the K-USB interface.
- To have news about new presets just send an e-mail with "KR100S" as
text at [e-mail]
REV03

4.5 Kg
13 Kg
100 cm
33.5 cm
33.5 cm
43.5 cm
KR100
KL12ma
Physical
XLR Input
Speakon Output
Speakon Input
AC Input
AC Output
REV03