Kärcher BDS 43/150 C Classic User manual

QUICKSTART
5.964-047.0 06/12
Warning
These are only brief instructions! Please read and comply with these instructions prior to using or servicing your
appliance.
Thenon-complianceoftheoperatingandsafetyinstructionsmaylead to damages of the appliance and to dangers
for the operator and other persons.
Start up
1A B Danger
Risk of injury. Pull the plug from the mains
before carrying out any tasks on the appliance.
A Pull the lever for level adjustment and
bring the handle toward the front into a
vertical position.
Tilt the appliance rearward.
B Place the disc brush/driver plate onto the
actuator and turn in anti-clockwise direction.
Set up the appliance.
2A B Detergent tank (option)
A Remove the lid.
Insert the filling hose into the fill opening
and guide the other end to a water faucet.
Fill in fresh water (maximum 50 °C).
B Fill detergent solution into the detergent
tank. Replace the lid.
3ABCA Insert the mains plug into a socket.
B Pull the lever for level adjustment.
C Tilt the handle into a comfortable position
(arms outstretched).
Hold the handle with both hands.
Release the lever for level adjustment.
Operation
1AStarting the machine
A Press and hold the unlocking button.
Use the ON/OFF switch.
Release the unlocking button.
Caution
Risk of damage to the floor covering.
Do not operate the appliance on the spot.
2AControl the direction
ALeft: Press the handle downward.
Right: Raise the handle.
BDS 43/150 C

QUICKSTART
5.964-047.0 06/12
3ACleaning
A Apply the detergent solution to the floor or
use the dosing lever of the detergent tank
(option).
Move the appliance over the surface to be
cleaned.
Repeat process for severe contamination.
Afterwards, pick up the wastewater with a
wet vacuum or a cloth.
Finish operation
1A
C
B
D
Turn off the appliance
A Release the handle switch.
B Pull the lever for level adjustment and
bring the handle in a vertical position.
C Disconnect the mains plug from the
socket.
D Wind the mains cable around the cable
holders.
Swivel the top cable hook upward.
2AEmpty and clean the detergent tank
(option)
몇Warning
Pleaseobservethelocalprovisionsregardingthe
wastewater treatment.
A Remove the detergent tank (option) and
dispose of unused detergent solution.
Rinse the detergent tank (option) with
clear water.
3ATurn off device
A Pull the lever for level adjustment and
bring the handle toward the front into a
vertical position.
Tilt the appliance rearward.
Remove the driver plate / disc brush.
Operation

QUICKSTART
5.964-047.0 06/12
Maintenance and care
daily monthly Kärcher Customer Service
1AA Check brush for wear and tear and
clean it.
Check the brushes for wear (bristle
length at least 10 mm), replace if
required.
Rinse contaminated disc brushes
with water.
Washcontaminatedpadsata max.
temperature of 60 °C.
2AA Check the mains connection cable
for damages.
3AA Clean the casing with a damp cloth.
Troubleshooting
1AInsufficient cleaning result
A Check brush for wear and tear and clean it.
Check the brushes for wear and replace if
necessary; replace the brush if the bristles
are shorter than 10mm.
–Replace contaminated pads and wash them
at a max. temperature of 60 °C.
–Rinse contaminated disc brushes with water
–Check the suitability of brush/pad and deter-
gent for the respective use.
2A B Appliance vibrates strongly
A Check for correct seating of disc brush/pad.
Check pad attachment.
B Position the handle lower (arms out-
stretched).
3APad does not turn
A Check if foreign bodies are blocking the
brush/pad; remove the foreign bodies if
required.