KAM KML305 User manual

USER MANUAL
Version 1.0
RGB
KML305
Power Party Bar WFS
Worldwide Trade Distributors
.KU,RH252SLSDEEL,HTROFRAG,HCAORPPANOSNIKRAP,ESUOHMELAS,SHJ
©2020 JHS. Specifications are subject to change without prior notice. Made in China.

1
Read Manual before Operation
Dear user,
Thanks for choosing our LED device. Before operating this device, please read this manual
thoroughly, and retain it for future reference.
Unpacking Instructions
Please note the warnings in bold which will ensure the safe and smooth operation. These
warnings are important to a certain extent.
Warning Data
This unit is in perfect condition before delivery, please check all accessories when unpacking
the unit. User should follow this user manual to operate this unit, and make sure that you are
clear on all safety information and unit operation before power it on. Any wrong operation
will make this unit out of warranty.
Carefully moving after receiving it, checking whether there is any damage from shipping, and all
the accessories in it.
Attention!
Unpacking Instructions
NAME
LED system
Power Cord
User manual
Stand
Wireless Footswitch
Packing Case
Attention! Indicates a skill or other useful information for special situations.
Important! Indicates important information to protect personnel from laser incident or injury.
Caution! Prevent damage or injury from incorrect operation.
Warning!
If the external flexible cable or cord of this luminaire is damaged, it shall be replaced by a
special cord or cord exclusively available from the manufacturer or his service agent.
Shields, lenses or ultraviolet screens shall be changed if they have become visibly damaged to
such an extent that their effectiveness is impaired, for example by cracks or deep scratches.
The lamps shall be changed if it has become damaged or thermally deformed.
QTY
1set
1pcs
1pcs
1pcs
1pcs
1set
C

Safety Instructions
2
Safety Instructions
To protect the environment, please try to recycle the packing material as much as possible.
The projector is for indoor use only, IP20. Use only in dry locations. Keep this device away
from rain and moisture, excessive heat, humidity and dust. Do not allow contact with water
or any other fluids, or metallic objects.
Don’t throw this product away just as general trash, please deal with the product follow the
abandon electronic product regulation in your country.
Locate the fixture in a well ventilated spot, away from any flammable materials and/or
liquids. The fixture must be fixed at least 50cm from surrounding walls.
To avoid condensation to be formed inside, allow this unit to adapt to the surrounding
temperatures when bringing it into a warm room after transport. Condense sometimes
prevents the unit from working at full performance or may even cause damages.
Don’t cover any ventilation openings as this may result in overheating.
Don’t install it on flammable objects.
Do not use it when maximum ambient temperature is higher than 40 degree.
Unplug the unit when it is not used for a longer time or before replacing the bulb.
Don’t open the top cover to avoid unit damage.
Please use the original packing when the device is to be transported.
◆
◆
◆
◆
◆
◆
◆
Never expose the lens to direct sunlight, even for a short period, this may damage the light
effect or even cause fire!

DMX-512 connection
Overhead Rigging
Make sure the area below the installation place is free from unwanted persons during rigging, de-
rigging and servicing.
Locate the fixture in a well ventilated spot, far away from any flammable materials and/or liquids.
The fixture must be fixed at least 50cm from surrounding walls
The device should be installed out of reach of people and outside areas where persons may walk
by or be seated.
The device should be well fixed; a free swinging mounting is dangerous and may not be
considered!
Do not cover any ventilation opening as this may result in overheating
Before the first time use, it must be inspected by professional staff to make sure safety, inspection
regularly every year.
◆
◆
◆
◆
◆
◆
Attention!
The installation must be carried out by qualified service personal only. Improper installation can
result in serious injuries and /or damage to property. Overhead rigging required extensive
experience! Working load limits should be respected, Certified installation materials should be
used, the installed device should be inspected regularly for safety.
Overhead Rigging
3
AC Power
Please use the attached power cord , note that power voltage and frequency
are the same as the marked voltage and frequency of device when
connecting power. Every device’s power should be connected separately,
so that device can be controlled individually.
Cable spec. Cable(EU)
Brown
Light blue
Yellow/Green
Cable(US)
Black
White
Yellow/Green
Pin
Live
Neutral
Earth
International
L
N
Connection between lights and DMX must use the shielded cable of diameter more than 0.5mm.
Please use the attached 3 pin XLR plug/socket to connect the DMX output/input interface. The
connection between socket and cable as below (note the plug/socket’s 3 pin number and position).
Note, XLR plug/socket’s 3pin can not be touched by inner hull, connection between pins is not allowed.
Except above connection, XLR plug/socket can not be connected with XLR control line. Device receives
international standard DMX512(1990) control signal.
When using standard DMX512 control signal, the last device’s output interface must be
connected to a DMX plug. This plug is putting a 120 ohm resistance between “canon”
plug’s 2 pin and 3 pin. Showing as below pic. Sticking this plug into the last device’s signal
output interface, it will avoid the interference during the process of signal transmission.
DMX-output
XLR mounting-sockets(rear view)
DMX-input
XLR mounting-plugs(rear view)
1-Shield
2-Shield(-)
3-Shield(+)

Operation instructions
Footswitch Operation Instruction
4
NO
1
2
3
4
5
FUNCTION
LED PAR lights
DMX input/output
Power connection
Power input
DESCRIPTION
12*Tri-9W
3PIN male/female XLR interface，for DMX communication
Power output connect with next light
Power input socket, built-in protective tube and spare tube
Receiving the audio signal through a microphone, and positive
response to the intensity by the potentiometer
To adjust the sound activated sensitivity
Microphones
Potentiometer
LCD control interface
6
7
NOTE：All the operations from the footswitch is invalid to the DMX mode and the SLAVE mode.
NAME FUNCTION
Press AUTO to activate the auto program controls. When working, all the lights will
begin in auto mode.
AUTO
Press SOUND to activate the sound program controls. When working, all the lights will
begin in sound mode.
SOUND
Color setting: R-G-RG-B-RB-GB-RGB
Light off.
BLACKOUT
1
POWER INPUT:100-240VAC 50/60HZ
POWER OUTPUT
FUSE:T1.6A 250V/60W
DMXIN
DMXOUT
IMIC MICROPHONE
SENSITIVITY
FUNCTIONSETTING
MENU UP DOWN ENTER
2 3 4 5 6 7
Product operation diagram
Various mode setting operations of the machinel
COLOUR

5
Menu operating instruction
After every power on the VERSION and MANUFACTURE INFORMATION will be shown
in LED monitor of rear panel. When the machine is powered on, LED monitor on rear
panel shows the current operating standalone mode or DMX address of DMX mode.
With help of LED control panel, isit very easy to set and change the operating mode.
After every resetting and saved, the new mode information will be shown on LED monitor at
next power .
Model choice,return to the previous menu.
Go into the deeper menu.
For higher numeric value operation.
For lower numeric value operation.
LED Display Functional Description
PAR light auto mode
Effect speed adjustment. 01 is the slowest, 99 is the fastest
PAR light sound mode
Color manual adjustment
LED color setting
Flash light speed adjustment. S.00: all on; S.99 is the fastest
Synchronous auto mode
Synchronous sound mode
Be the master for synchronous mode.
（under AUTO/SOUND/COLOR Mode）
Wireless pedal working mode
Aging testing and main board testing program.
Restore the factory initial setup
DMX channel selecting
Channel address setting
Slave mode
Address setting

6
Menu operating instruction
Initial Setting
ENTER into the next
step. To choose the
effect speed through
the UP/DOWN button.
S.01-S.99：
Effect speed adjustment.
01 is the slowest,
99 is the fastest
ENTER:
confirm and back
to the previous step.
AP01-AP17
PAR light auto show
Built-in
auto
programs
Rut
SP01-SP12
PAR light sound show
Built-in
sound
programs
SOU
Enter to confirm.
To adjust the sound sensitivity through the potentiometer.
ENTER into the next
step. MENU to
the previous step.
S.00—S.99：
strobe speed
S.00: all on,
S.99: the fastest
ENTER:
confirm and back
to the previous step.
R.000-R.255
G.000-G.255
B.000-B.255
COLO
color
setting
COL
Selecting the channel d001-dXXX Setting the address
03/04/12/20CH
DMX
mode
DNH
ENTER into the
next step 001-255 address setting
When selecting the
SLAVE mode, this
machine will follow
the master’s built-in
program through the
DMX cable.
SLAVE
mode
SLR
ENTER:
confirm and back
to the previous step.
ENTER into the
next step
ON：
turn on master mode
M-En: master mode
System
setting
sys
ENTER:
confirm and back
to the previous step.
ENTER into the
next step
ON：
turn on the wireless
footswitch working mode
W-En:
wireless pedal
working mode
ENTER:
confirm and back
to the previous step.
OFF：
turn off the wireless
footswitch working mode
OFF：
turn off master mode
TEST: testing mode
REST:
restore the
factory initial setup
ENTER to the testing mode
ENTER to restart the machine
NOTES：（1）S.01-S.99: program speed adjusting; S.01: the slowest, S.99: the fastest
2 A point will be shown on the screen if there’s no operation in 30s.
3 Machine address bit instruction, face to the LED screen, from left to right, the address
is 1-2-3-4.
4 The nixie tube will twinkle when there’s no signal input to SLAVE,D001.

7
DMX operation instructions
DMX Channels Chart.This device adopts large storage and high speed chip, which has been written with
lots of effect based on laser light DMX application. There are many kinds of model in channel one.
3 Channel DMX mode
CH1
CH2
Auto show
Sound-
to-Light
Auto shows
Channel Description
Value
Blackout
Standard Auto mode
Flashing Auto mode
000-009
010-127
128-255
000-014
015-029
030-044
045-059
060-074
075-089
090-104
105-119
120-134
135-149
150-164
165-179
180-194
195-209
210-224
225-239
240-255
Standard Auto show 1
Standard Auto show 2
Standard Auto show 3
Standard Auto show 4
Standard Auto show 5
Standard Auto show 6
Standard Auto show 7
Standard Auto show 8
Standard Auto show 9
Standard Auto show 10
Standard Auto show 11
Standard Auto show 12
Standard Auto show 13
Standard Auto show 14
Standard Auto show 15
Standard Auto show 16
Standard Auto show 17
Sound-to-Light show 1
Sound-to-Light show 2
Sound-to-Light show 3
Sound-to-Light show 4
Sound-to-Light show 5
Sound-to-Light show 6
Sound-to-Light show 7
Sound-to-Light show 8
Sound-to-Light show 9
Sound-to-Light show 10
Sound-to-Light show 11
Sound-to-Light show 12
000-019
020-039
040-059
060-079
080-099
100-119
120-139
140-159
160-179
180-199
200-219
220-255
CH3 Program speed setting
000-255

8
DMX operation instructions
12 Channel DMX mode
Value
Channel Description
CH1
CH2
CH3
CH4
CH5
CH6
CH7
CH8
CH9
CH10
CH11
CH12
Red Dimmer
Green Dimmer
Blue Dimmer
RGB overall dimmer
Sound-to-Light flashing
Flashing speed
All On
000-255
000-255
000-255
000-191
192-200
201-249
250-255
Value
Channel Description
CH1
CH2
CH3
CH4
4 Channel DMX mode
PAR1
PAR1
PAR1
PAR2
PAR2
PAR2
PAR3
PAR3
PAR3
PAR4
PAR4
PAR4
Function
Red dimmer
Green dimmer
Blue dimmer
Red dimmer
Green dimmer
Blue dimmer
Red dimmer
Green dimmer
Blue dimmer
Red dimmer
Green dimmer
Blue dimmer
000-255
000-255
000-255
000-255
000-255
000-255
000-255
000-255
000-255
000-255
000-255
000-255

9
DMX operation instructions
Par can 2 flashing speed
Par can 3 red dimmer
Par can 3 green dimmer
Par can 3 blue dimmer
Par can 3 RGB overall dimmer
Par can 3 flashing speed
Par can 4 red dimmer
Par can 4 green dimmer
Par can 4 blue dimmer
Par can 4 RGB overall dimmer
Par can 4 flashing speed
000-255
000-255
000-255
000-255
000-255
000-255
000-255
000-255
000-255
000-255
000-255
CH10
CH11
CH12
CH13
CH14
CH15
CH16
CH17
CH18
CH19
CH20
20 Channel DMX mode
Value
Channel Description
CH1
CH2
CH3
CH4
CH5
CH6
CH7
CH8
CH9
Par can 1 red dimmer
Par can 1 green dimmer
Par can 1 blue dimmer
Par can 1 RGB overall dimmer
Par can 1 flashing speed
Par can 2 red dimmer
Par can 2 green dimmer
Par can 2 blue dimmer
Par can 2 RGB overall dimmer
000-255
000-255
000-255
000-255
000-255
000-255
000-255
000-255
000-255

10
Product Parameter
Model Power partybar(WLS)
Power:
PAR LED:
Beam angle:
LED:
DMX channels:
Spare parts:
AC power:
Fuse ：
Stand :
Weight：
Product size：
Packing size:
Shipping data:
Specifications
84W
12*Tri-9W
15°
R-620nm/100lm, G-520nm/160lm ，B-462nm/50lm
3 / 4 / 12 / 20CH
T-Bar, stand, carrying bag, wireless footswitch, IR remote control, standing foot
switching power supply, 100V-240V 50/60Hz (for all international markets)
T 1.6A, 250V
1.5m—2.5m（adjustable）
10.2kg
L1032×W71×H235mm
L1057×W145×H457mm
40HQ: 924ctns / 40GP: 616ctns / 20GP: 375ctns
1032mm
235mm
71mm