
76
FUNZIONAMENTO
Agite semplicemente sul tasto posteriore (6)
per accendere l’apparecchio.
L’apparecchio necessita di circa 3 minuti
per scaldarsi ed essere pronto all’uso. Per
azionarla premete un tasto del radiocomando
(TX) o il tasto del telecomando a lo (RX).
In caso di mancata accensione, scollegate
il cavo di alimentazione e vericate l’integrità
del fusibile (9). Eventualmente sostituitelo
con uno di eguale volore amperometrico.
All’attivazione del getto i led si accenderanno
in automatico illuminando il fumo di colore blu.
TERMINATO L’UTILIZZO
Dopo ogni utilizzo svuotate il serbatoio,
utilizzate un acone di liquido opzionale
LIQ C2-5 per ripulire i condotti e la caldaia
della macchina (seguite le istruzioni riportate
sul acone). Terminata la pulizia spegnete
l’apparecchio tramite il tasto (6), scollegate la
spina dalla presa di corrente e il comando a lo
(RX). Riponete l’apparecchio in luogo asciutto
e lontano dalla portata dei bambini.
NOTE
• Durante il riscaldamento della macchina si
noteranno dei piccoli sbu di fumo dovuti
allo smaltimento del liquido nel condotto.
Ciò è perfettamente normale. Anche dopo
aver rilasciato il tasto del radiocomando
(TX) o del comando a lo (RX) potrebbe
continuare ad uscire una piccola quantità
di fumo.
• Terminato l’utilizzo, prima di riporre a
macchina, bisognerebbe svuotare il
serbatoio e tenere premuto il tasto del
radiocomando o del comando a lo per
emettere fumo e nire tutto il liquido
presente nei condotti. Solo ora potrete
spegnere la macchina. Se lasciato nei
condotti, il liquido potrebbe seccarsi ed
ostruire i condotti.
OPERATION
Use the switch (6) on the back to turn on the
xture. Around 3 minutes are necessary for
heating and be ready for use. To start press a
button of the wireless transmitter (TX) or the
button of the wired remote control (RX)
If the machine doesn’t work, disconnect
the power cable and check that the
fuse (9) is ok. If necessary replace the
fuse with one of the same amperage.
At the starting of the smoke output the leds will
automatically light on, illuminating smoke in
blue color.
AFTER USE
When you have nished using the machine,
empty all the uid from the tank. Use a bottle
of optional cleaning uid LIQ C2-5 to clean the
tubes and the heater ( folllow the instructions on
the label). After the cleaning, turn o the xture
through the switch (6), disconnect the plug from
the power socket and the wired remote control
(RX). Put the machine in a dry place, away
form children’s reach.
NOTES
• During warming up you could notice some
smoke pus, due to the liquid that might
have remained in the machine’s tube. This
absolutely normal. Also after you have
released the wireless transmitter’s (TX)
or the wired receiver’s (RX) button a small
quantity of smoke might still come out.
• Once you have nished using the
machine, before you put it back, it is
necessary to empty the tank and keep
the transmitter’s or the receiver’s button
pressed, in order to expel all the residous
liquid from the machine. You can now turn
o the machine. If liquid remains for long
in the ducts, it could get solid and obstruct
them.