Kartsana BRAVA TG-1000 User manual

1
C/ Narcís Monturiol, 34
08192 Sant Quirze del Vallès
ARCELONA
TEL. [phone]
[email protected]
[email protected]
INSTRUCTIONS MANUAL
BRAVA POWER STRETCHER
Read these maintenance instructions
before using the product and keep them
for future reference.

OPERATING AND HANDLING
THE BRAVA POWER STRETCHER

OPERATING AND HANDLING
THE BRAVA POWER STRETCHER
CONTENTS
1.- INTRODUCTION 1
1.1.- FOREWORD 1
1.2.- RESPONSIBILITY AND WARRANTY 2
1.3.- RESPONSIBILITY AND WARRANTY 2
1.4.- SPECIFICATIONS 3
1.5.- ATTENTION 3
1.6.- SUMMARY OF SAFETY PRECAUTIONS 4
2.- INSTRUCTIONS MANUAL 7
2.1.- TECHNICAL SPECIFICATIONS BRAVA STRETCHER 7
2.2.- VEHICLE’S CONFIGURATION 8
2.3.- OPERATING AND HANDLING THE STRETCHER 9
2.3.1.- INSTALLING THE BATTERY 9
2.3.2.- STARTING AND CONTROLLING THE STRETCHER. 10
2.3.3.- ADJUSTABLE RECLINING HEAD 14
2.3.4.- EXTENDABLE BACK REST FRAME 14
2.3.5.- ADJUSTABLE LEG REST 15
2.3.6.- SAFETY HANDRAIL 16
2.3.6.1.- Ho to remove rails and IV support 18
2.3.7.- INTRAVENOUS DRIP STAND 20
2.3.8.- WAY OF FASTENING THE SAFETY BELTS TO THE PATIENT. 21
2.3.8.1.- Head belts. 21
2.3.8.2.-Abdomen belts 21
2.3.9.- DISMANTLING-ASSEMBLY OF THE STRETCHER BELTS. 22
2.3.10.- POSITION OF THE BELTS. 23
2.3.10.1.- Lateral belts. 23
2.3.10.2.- Head belts. 23
2.3.11.- REAR WHEEL BRAKE LEVER. 24
2.3.12.- LEVER TO UNLOCK REVOLVING FRONT WHEELS. 25
2.3.13.- ASSEMBLING THE BRAVA STRETCHER ONTO THE BRAVO RAIL 27
2.3.14.- TRANSFERRING THE PATIENT TO THE STRETCHER. 30
3.- FAULTS 31
4.- DISINFECTION 32
5.- MAINTENANCE 32
6.- E PLODED BRAVA STRETCHER 33
7- ACCESSORIES 42

OPERATING AND HANDLING
THE BRAVA POWER STRETCHER

OPERATING AND HANDLING
THE BRAVA POWER STRETCHER
1
Rev.4
04-11-15
1.- INTRODUCTION
1.1.- Foreword
The BRAVA stretcher has been solely designed to rescue and transport patients. The
product complies ith the directive 93/43/EWG. It is an electric-hydraulic model that
allo s the height to be adjusted according to different needs, ith just t o buttons.
Manual operation is possible hen potential faults in the automated system occur.
The BRAVA stretcher model must be joined to the ambulance using the KARTSANA BRAVO rail.
This stretcher has been tested according to the regulation AS/NZS 4535:1999.
All information regarding treatment, disinfection and maintenance is indicated, taking
into consideration our current experience and kno -ho .
We reserve the right to change the specifications of the stretcher to improve the
products.
Maximum
duty cycle.
60 sec. -
operating
maximum
time.
100 sec. - Idle time.
Read the instructions manual Maximum load 300 Kg.
before using.
Medical Product class I. Electrical isolation class II.
- Do not throw away. Send to recycling center.
- Pac ing should be manage as a reusable refuse.
- Metals should be treated as old metal.
- Plastic product should be treated as recycling material.
- Waste management must be as regulation of the country.
- As municipal administration about recycling and refuse.
BRAVA information
sticker

OPERATING AND HANDLING
THE BRAVA POWER STRETCHER
2
Rev.4
04-11-15
1.2.- Responsibility and warranty
The stretcher must be checked at the time of its delivery to the rescue organisation. All
its functions must be explained in great detail. The assistance organisation must take
charge of teaching all its employees ho to use it correctly.
The product has a 24-months arranty from the delivery date to the end user.
The arranty does not cover defects resulting from incorrect installation, misuse or
improper use of the stretcher. All repairs must be made by a technical service
authorised by Kartsana or its respective representative.
The manufacturer ill not be liable for any anomaly caused to the stretcher as a result of
using products other than those provided by Kartsana.
1.3.- Responsibility and warranty
The stretcher must be checked at the time of its delivery to the rescue organisation. All
its functions must be explained in great detail. The assistance organisation must take
charge of teaching all its employees ho to use it correctly.
The product has a 24-months arranty from the delivery date to the end user.
The arranty does not cover defects resulting from incorrect installation, misuse or
improper use of the stretcher. All repairs must be made by a technical service
authorised by Kartsana or its respective representative.
The manufacturer ill not be liable for any anomaly caused to the stretcher as a result of
using products other than those provided by Kartsana.
Changes or modifications to the unit not expressly approved by Kartsana could void the
user’s authority to operate the system.

OPERATING AND HANDLING
THE BRAVA POWER STRETCHER
3
Rev.4
04-11-15
1.4.- Specifications
Maximum unassisted l ad
300Kg
Standards
UNE-EN-1865-2
EN-1789+A1
UNE-EN 60601-1 / UNE-EN 61000-6
UL-1642
Backrest Articulati n/Sh ck P siti n
De 0º a 80º
F trest Articulati n/Sh ck P siti n
D uble articulati n
Wheels diameter
160mm
T tal Length
1
1970mm
T tal Width
564mm
Maximum and minimum height
350mm-1185mm
L ading Height
3
Max. 1030mm
Minimum Operat rs Required f r L ading/
Unl ading an Occupied Stretcher
2
Minimum Operat rs Required f r L ading/
Unl ading an Un ccupied Stretcher
1
Rec mmended/C mpatible fixati n system
Rail Brav 1 - Rail Brav 2
1Total length could be shortened to1607mm (with the extensible back frame to the minimum position and the
backrest folded to 80º - position used in manoeuvres with little space, elevators, etc.)
2Heigt measured from ground level to main structure of the patient area.
3For weights higher than 250kg it recommended to use the stretcher by a low position in patient transport,
rising up the stretcher until the necessary position just in the moment of introduce it into the ambulance
Kartsana reserves the right to change specifications without notice.
1.5.- Attention
Through this sign, information is furnished on important safety measures for the
correct use of the stretcher, in order to prevent accidents. The warnings alerts the
reader about a situation hich, if not avoided, could result in death or serious injury.
The cautions alerts the reader of a potentially hazardous situation hich, if not
avoided, may result in minor or moderate injury to the user or patient or damage to
the equipment or other property. This includes special care necessary for the safe
and effective use of the device and the care necessary to avoid damage to a device
that may occur as a result of use or misuse.

OPERATING AND HANDLING
THE BRAVA POWER STRETCHER
4
Rev.4
04-11-15
1.6.- Summary of safety precautions
Carefully read and strictly follo the arnings and cautions listed on these pages.
Service only by qualified personnel.
WARNINGS:
- Improper usage of the stretcher can cause injury to the patient or operator. Operate the stretcher only as described in this
manual.
- Do not modify the stretcher or any components of the stretcher. Modifying the product can cause unpredictable operation
resulting in injury to the patient or operator. Modifying the product also voids its arranty.
- Any emergency vehicle to be used ith this stretcher must have the compatible fixation system installed.
- Do not attempt to operate the stretcher hen it is loaded into a stretcher fastener.
- Have the vehicle safety rail compatible installed by a certified mechanic. Improper rail installation can cause injury to the patient
or operator and/or damage to the stretcher. Verify that the stretcher legs lock into the load position before ithout contact ith the
fender of the vehicle. Failure to properly lock the stretcher height into position can cause injury to the patient or operator and/or
damage to the stretcher
- To avoid risk of electric shock, never attempt to open the battery pack for any reason. If the battery pack case is cracked or
damaged, do not insert it into the charger. Return damaged battery packs to a service center.
- Do not remove the battery hen the stretcher is activated.
- Avoid direct contact ith a et battery or battery enclosure. Contact may cause injury to the patient or operator
- Inspect batteries for damage before every use.
- Practice changing height positions and loading the stretcher until operation of the product is fully understood. Improper use can
cause injury.
-Do not allo untrained assistants to assist in the operation of the stretcher. Untrained technicians/assistants can cause injury to
the patient or themselves.
- Do not ride on the base of the stretcher. Damage to the product could occur, resulting in injury to the patient or operator.
- Transporting the stretcher side ays can cause the stretcher to tip, resulting in possible damage to the product and/or injury to
the patient or operator. Transporting the stretcher in a lo ered position, head or foot end first, minimizes the potential of a
stretcher tip.
- Grasping the stretcher improperly can cause injury. Keep hands, fingers and feet a ay from moving parts. To avoid injury, use
extreme caution hen placing your hands and feet near the base tubes hile raising and lo ering the stretcher.
- Al ays use all restraint straps to secure the patient on the stretcher. An unrestrained patient may fall from the stretcher and be
injured.
- Never leave a patient unattended on the stretcher or injury could result. Hold the stretcher securely hile a patient is on the
product.
- Never apply the optional heel lock(s) hile a patient is on the stretcher. Tipping could occur if the stretcher is moved hile the
heel lock is applied, resulting in injury to the patient or operator and/or damage to the stretcher.
- Side rails are not intended to serve as a patient restraint device.
- Hydraulically raising or lo ering the stretcher may temporarily affect electronic patient monitoring equipment. For best results,
patient monitoring should be conducted hen the stretcher is idle.
- High obstacles such as curbing, steps or rough terrain can cause the stretcher to tip, possibly causing injury to the patient or
operator.
- The Brava TG-1000 stretcher is designed to be compatible ith Bravo Rail, and is operator responsibility that these products
ork together.
- Transporting the stretcher in lo er positions reduces the potential of a stretcher tip. If possible, obtain additional assistance or
take an alternate route.
- T o operators must be present hen the stretcher is occupied.
- Operators must be able to lift the total eight of the patient, stretcher and any items on the stretcher.

OPERATING AND HANDLING
THE BRAVA POWER STRETCHER
5
Rev.4
04-11-15
- Never install or use a heel lock on a stretcher ith excessively orn heels. Installing or using a heel lock on a heel ith
less than a 160mm diameter could compromise the holding ability of the heel lock, possibly resulting in injury to the patient or
operator and/or damage to the stretcher or other equipment.
- When cleaning, use any appropriate personal safety equipment (goggles, respirator, etc.) to avoid the risk of inhaling contagion.
- Some cleaning products are corrosive in nature and may cause damage to the product if used improperly. If the products
described above are used to clean Kartsana equipment, measures must be taken to ensure the stretchers are iped ith clean
ater and thoroughly dried follo ing cleaning. Failure to properly rinse and dry the stretchers ill leave a corrosive residue on the
surface of the stretchers, possibly causing premature corrosion of critical components.
- Failure to properly clean or dispose of contaminated mattress or other stretcher components ill increase the risk of bloodborne
pathogens and may cause injury to the patient or operator.
- Escaping fluid under pressure can penetrate the skin causing serious injury. Avoid the hazard by relieving pressure before
disconnecting hydraulic or other lines. Tighten all connections before applying pressure. If an accident occurs, see a doctor
immediately. Any fluid injected into the skin must be surgically removed ithin a fe hours or gangrene may result. Doctors
unfamiliar ith this type of injury should reference a kno ledgeable medical source.
- To avoid the risk of injury, do not use bare hands to check for hydraulic leaks.
- Take special precautions regarding electromagnetic compatibility (EMC) hen using medical electrical equipment like Brava
TG-1000 stretcher. Portable and mobile RF communications equipment can affect the function of the stretcher.
- The use of accessories, transducers and cables other than those specified, ith the exception of transducers and cables sold
by Kartsana as replacement parts for internal components may result in increased emissions or decreased immunity of the TG-
1000 Brava stretcher.
CAUTIONS:
- Changes or modifications to the unit not expressly approved by Kartsana could void the user’s authority to operate the system.
- The stretcher can be set at any stretcher load height position. Establish the required stretcher load height before placing the
stretcher into service
- Set the stretcher load height to the proper stop height prior to operation.
- Installation of the safety hook should be done by a certified mechanic familiar ith ambulance vehicle construction. Consult the
vehicle manufacturer before installing the safety hook and be sure that the installation of the safety hook does not damage or
interfere ith the brake lines, oxygen lines, fuel lines, fuel tank or electrical iring of the vehicle.
- Only use the battery and charger as specified in this Instruction Manual.
- The stretcher is not for use ith an AC adapter.
- When charging a battery in an ambulance, locate the charger in an enclosed cabinet and out of patient reach during transport.
- Ensure that the battery is fully charged prior to placing into service. An uncharged or depleted battery may cause poor stretcher
performance.
- Before operating the stretcher, clear any obstacles that may interfere and cause injury to the operator or patient.
- When unloading the stretcher from the patient compartment, ensure that the caster heels are safely set on the ground or
damage to the product may occur.
- Remove the battery if the stretcher is not going to be used for an extended period of time (more than 24 hours).
- Wheel lock(s) are only intended to help prevent the stretcher from rolling hile unattended and to aid in patient transfer. A heel
lock may not provide sufficient resistance on all surfaces or under loads.
- Ensure that the restraints are not entangled in the base frame hen raising and lo ering the stretcher.
- Do not store items under the stretcher mattress. Storing items under the mattress can interfere ith the operation of the
stretcher.
- Do not steam clean or ultrasonically clean the unit.
- Maximum ater temperature should not exceed 80°C.
- Allo stretcher to air dry.
- To el dry all casters and interface points.
- Failure to comply ith these instructions may invalidate any/all arranties.
- Al ays remove the battery before ashing the stretcher.

OPERATING AND HANDLING
THE BRAVA POWER STRETCHER
6
Rev.4
04-11-15
- For additional maintenance information, see the preventative maintenance information.
- Improper maintenance can cause injury or damage to the product. Maintain the stretcher as described in this manual. Use only
Kartsana approved parts and maintenance procedures. Using unapproved parts and procedures could cause unpredictable
operation and/or injury and ill void the product arranty
- Failure to use authorized parts, lubricants, etc. could cause damage to the stretcher and ill void the arranty of the product.
- Hydraulic lines, hoses, and connections can fail or loosen due to physical damage, kinks, age, and environment exposure.
Check hoses and lines regularly to avoid damage to the stretcher. Check and tighten loose connections.
NOTES:
- Loose items or debris on the patient compartment floor can interfere ith the operation of the safety hook and stretcher
fastener. Keep the patient compartment floor clear
- This manual should be considered a permanent part of the stretcher and should remain ith the product even if the stretcher is
subsequently sold.
- Kartsana continually seeks advancements in product design and quality. Therefore, hile this manual contains the most current
product information available at the time of printing, there may be minor discrepancies bet een your stretcher and this manual
- Kartsana recommends that, prior to installation, the certified mechanic plan the placement of the safety hook in the rear of the
vehicle.
- Automatic charging ill only occur ith the batteries Pak batteries supplied by Kartsana.
- Only use Kartsana-approved batteries ith Bravo rail.
- Batteries slo ly lose po er hen not on the charger.