KaVo Scan eXam One User manual

KaVo Scan eXam™ One
Quick guide Scan eXam™ One
Imaging plate handling, Image capturing, Installation
www.stomshop.pro

KaVo Scan eXam™ One – Imaging plate packing & handling
2
3 4
1 4
5
6
2
3
1
Right orientation
False orientation
Store the imaging plate max 24 hours packed before the exposure.
INSTRUCTIONS
1 2 3 4
www.stomshop.pro

KaVo Scan eXam™ One – Image capturing
2
3 4
1
Make sure the right patient is selected.
Activate the Scan eXam™ One unit by pressing the Device button
in the Image Capturing window if it is not in the ready-state.
Ready
available
disconnected
Exposure time
(s)
Position and exposure.
1 2
34 5
Process max 1 hour from
exposure.
Remove the plastic hygiene
bag.
Feed the imaging plate
carefully into the unit with
protective cover. 1
2
3
Imaging plate is ready for reuse.
Handle with care after exposure.
Hygiene bags and protective
covers are single use items.
www.stomshop.pro

KaVo Dental GmbH · D-88400 Biberach/Riß · Telefon [phone] · Fax [phone] · www.kavo.com
Mat.-Nr 209439-1 07/13 en We reserve the right to make technical modifications. Slight colour dierences are due to the printing process. © Copyright KaVo Dental GmbH.
KaVo Scan eXam™ One – Installation
1 2 3
4 5 6
Connect the
cables.
Switch the unit on.
Do not position the system in direct sunlight.
Insert the software installation media
(DVD) and launch the software installer if it
does not start automatically. Select a correct setup.
A always needed, B optional
A
B B B
Configure the devices with the Add Decive
Wizard.
If the Wizard does not open automatically
press Setup on the image capture window.
Select the desired device from the list and
press Finish.
Take a test image.
correct exposure
over exposure
under exposure
1 2 3 4
www.stomshop.pro