KaVo ESTETICA E50 Life User manual

Short instructions for use
ESTETICA E50 Life

Distributed by:
KaVo Dental GmbH
Bismarckring 39
D-88400 Biberach
Phone [phone]
Fax [phone]
Manufacturer:
Kaltenbach & Voigt GmbH
Bismarckring 39
D-88400 Biberach
www.kavo.com

Table of contents
1Controls............................................................................................................................................ 4
1.1 Dentist element TM table....................................................................................................... 4
1.2 Dentist element S-table.......................................................................................................... 5
1.3 Assistant element................................................................................................................... 5
1.4 Groups of keys....................................................................................................................... 6
1.5 Foot control............................................................................................................................ 8
2Moving the patient chair................................................................................................................... 9
2.1 Positioning the dental chair manually..................................................................................... 9
2.2 Positioning the patient chair with the foot control................................................................... 9
2.3 Automatic positioning of patient chair.................................................................................... 9
3User menu...................................................................................................................................... 11
3.1 Starting and exiting from the user menu.............................................................................. 11
3.2 Selecting and setting an option............................................................................................ 12
4Switching between levels and selecting a dentist.......................................................................... 13
5Setting the timer............................................................................................................................. 15
5.1 Select the timer time............................................................................................................ 15
5.2 Set the timer time................................................................................................................. 15
6Setting the handpieces.................................................................................................................. 16
6.1 Adjusting functions............................................................................................................... 16
6.2 Turbine................................................................................................................................. 18
6.3 INTRA LUX Motor KL 703 LED and COMFORTdrive ......................................................... 18
6.4 PiezoLED............................................................................................................................. 19
6.5 Multi-function syringe........................................................................................................... 19
6.6 KL 703 LED in ENDO mode (optional accessories)............................................................. 19
7Using handpieces........................................................................................................................... 23
8Operation of the operating light KaVoLUX 540 LED (optional)...................................................... 24
9Using the patient communication menu (optional)......................................................................... 27
9.1 Using the patient communication menu with the foot control............................................... 28
10 Hygiene.......................................................................................................................................... 30
10.1 Tumbler filling and bowl flushing.......................................................................................... 30
10.2 Rinsing program................................................................................................................... 30
10.3 Intensive germ reduction...................................................................................................... 31
10.4 Reprocessing the suction system including suction hoses.................................................. 33
10.5 HYDROclean function.......................................................................................................... 33
10.6 Replenishing Oxygenal........................................................................................................ 34
11 Charging the wireless foot control.................................................................................................. 35
12 Warning messages........................................................................................................................ 37
12.1 Safety shut-off...................................................................................................................... 37
12.2 Additional warning messages.............................................................................................. 38
13 Error messages in MEMOdent menu............................................................................................. 39
Table of contents 3

Short instructions for use 1 Controls 4
1 Controls
CAUTION
These brief instructions for use only contain the essential operating
functions.
It does not substitute for the Instructions for Use and Servicing that are part of the
scope of delivery.
▶ The Instructions for Use and Servicing include all information and safety notes
that must be observed to ensure intended use and safe operation of the product!
▶ The user must ensure that the unit works properly and is in satisfactory condition
before each use.
1.1 Dentist element TM table
Dentist's unit
AGroup of keys for the dental chair BGroup of keys for illumination
CGroup of keys for hygiene DGroup of keys for menu selection
(MEMOdent menu)
EGroup of keys for the timer

Short instructions for use 1 Controls 5
1.2 Dentist element S-table
AGroup of keys for menu selection
(MEMOdent-menu)
BGroup of keys for illumination
CGroup of keys for hygiene DGroup of keys for the timer
EGroup of keys for the dental chair
1.3 Assistant element
AGroup of keys for hygiene BGroup of keys for illumination
CGroup of keys for the timer DGroup of keys for the dental chair

Short instructions for use 1 Controls 6
1.4 Groups of keys
Group of keys for the dental chair
The keys of the assistant unit each have two functions and show two symbols.
Assistant element key Dentist element key Name
"Chair up" key
"AP 0" key
(automatic position 0)
"Chair down" key
"SP" key
(rinsing position)
"LP" key
(last position)
"AP" key
(activate automatic position)
"Backrest down" key
"AP 1" key
(automatic position 1)
"Backrest up" key
"AP 2" key
(automatic position 2)
"Collapsed position" key
Group of keys for illumination
Key Name Control element
"Operating light" key dentist element only
"Operating light dimming" key Dentist element and
assistant element
"X-ray image viewer" key dentist element only

Short instructions for use 1 Controls 7
Group of keys for hygiene
Key Name Control element
"Tumbler filler" key Dentist element and assistant el‐
ement
"Bowl rinsing" key Dentist element and
assistant element
"Bell" key dentist element only
"Intensive germ reduction" key assistant element only
"HYDROclean" key assistant element only
MEMOdent menu
Group of keys for menu selection
①Selection keys for menu functions ②Display
Group of keys for the timer
Key Name Control element
"Additional motor drives" key Dentist element only
"Remote Control" key Dentist element only
"Timer 1" key Dentist element and
assistant element
"Timer 2" key Dentist element only
"Timer 3" key Dentist element only
"Timer 4" key Dentist element only

Short instructions for use 1 Controls 8
1.5 Foot control
Item Name Function with instrument
mounted
Function with instrument tak‐
en out
①U-shaped switch Switches the foot buttons to
the "Chair movement" func‐
tion.
② "LP/preselected spray" foot-
operated button
Drives dental chair to last po‐
sition.
Sets the spray preselection.
③ "Chair position/direction of
motor rotation" cross switch
Changes the position of the
dental chair.
Selects the direction of motor
rotation (for motors KL 701 /
KL 703 LED / COMFORT‐
drive 200XD).
④ "SP/blown air" foot-operated
button
Drives dental chair to rinsing
position.
Activates blown air (chip
blower) on instrument (does
not apply to PiezoLED).
⑤ "Preselection of level/hand‐
pieces" foot-operated button
Preselection of level Starts the motor/handpieces
and controls the speed/inten‐
sity of the handpieces.
"Chair position" cross switch
①Chair up ②Backrest up
③Chair down ④Backrest down

Short instructions for use 2 Moving the patient chair 9
2 Moving the patient chair
2.1 Positioning the dental chair manually
Key Function
The chair moves up.
The chair moves down.
The backrest moves upward.
The backrest moves downward.
2.2 Positioning the patient chair with the foot control
See also:
2"Chair position" cross switch, Page 8
21.5 Foot control , Page 8
2.3 Automatic positioning of patient chair
Recalling automatic position through the dentist element
▶ Briefly press the desired button.
ðChair automatically moves to the saved chair position.
ðWhen the saved chair position is reached, the LED on the button lights up.
Saving the automatic position through the dentist element
▶ Move the chair to the desired position.
▶ To save the chair position, press the "AP 0", "AP 1", "AP 2", "SP" or "Collapsed
position" button until you hear a signal.
ðLED of the pressed button lights up. The chair position is saved.

Short instructions for use 2 Moving the patient chair 10
Recalling an automatic position through the assistant element
▶ Briefly press the "AP" key.
ðThe LEDs of the "AP 0", " AP 1", " AP 2", "SP", and "LP" keys flash for approxi‐
mately four seconds.
▶ During these four seconds, briefly press the "AP 0", " AP 1", " AP 2", "SP" or "LP"
key.
ðThe chair moves into the selected automatic position.
Saving an automatic position through the assistant element
▶ Move the chair to the desired position.
▶ Briefly press the "AP" key.
ðThe LEDs of the "AP 0", " AP 1", " AP 2", "SP", and "LP" keys flash for approxi‐
mately four seconds.
▶ During these four seconds, press the "AP 0", "AP 1", "AP 2" or "SP" button, until
an acoustic signal is issued.
ðLED of the pressed button lights up. The chair position is saved.
Recalling an automatic position through the foot control
▶ Press the "SP" foot switch.
or
▶ Press the "LP" foot switch.
ðThe chair moves into the selected automatic position.
Saving an automatic position with the foot control
▶ Hold down the foot pedal and foot-operated button "SP" or "LP", and simultane‐
ously press any button for an automatic position ("AP 0", "AP 1", "AP 2" or "SP")
on the dentist or assistant element until you hear a signal.
ðThe automatic position is saved to the foot-operated button.

Short instructions for use 3 User menu 11
3 User menu
The following options can be opened in the user menu:
Option Function Description
1User Set number of users.
2 Tumbler Set tumbler filling time.
3 Bowl Set bowl rinsing time.
4 Handpiece light Set cold light afterglow period.
5 ENDO Set ENDO holder.
Available only if an ENDO dongle is present.
6 Equipment profile • Save equipment profile from treatment
unit to SD card.
▪ Save equipment profile from SD card to
treatment unit.
7 Time of day Set time of day.
8 Date Set date.
9 Time / date display mode Set display mode for time of day and date:
• Time of day only
• Time of day without seconds
• Time of day and date
▪ Date only
10 LCD Set contrast of LCD display.
11 Language Set menu language:
• Deutsch
• English
• Italiano
• Français
▪ Castellano
12 LED lamp DIM mode Set dimming mode for LED lamp.
Available only if an LED lamp is present.
13 Colour temp. of LED lamp Set color temperature of LED lamp.
Available only if an LED lamp is present.
14 Firmware Display current firmware version.
3.1 Starting and exiting from the user menu
▶ Press the "Next" key (S6) to switch to the user menu.
ðOption 1 "Number of users" or most recently used option is displayed.

Short instructions for use 3 User menu 12
▶ Press the "Enter" key (S6) to exit from the option menu.
ðThe changed settings are saved.
3.2 Selecting and setting an option
▶ Press the "Back" and "Forward" keys to select the desired option (1 through 14).
▶ Press the "Increase value" and "Decrease value" keys to select the desired pa‐
rameter or value.
See also:
2Instructions for use ESTETICA E50 Life

Short instructions for use 4 Switching between levels and selecting a dentist 13
4 Switching between levels and selecting a dentist
Standby menu
The unit starts in the standby menu.
Likewise, when you exit from the handpiece menu and the patient communication menu, the unit auto‐
matically switches to the standby menu.
Example standby menu with selection buttons
Switching between levels
Level switching is deactivated in the basic state.
The level switching symbol displays the current dentist.
Note
The device acts like on level E when level switching is deactivated.
This means: centring of the foot pedal is not activated.
▶ To switch between levels, keep the "Bell" and the "Bowl flushing" keys and the foot
pedal depressed, until a signal sound can be heard.
After activating level switching, the level switching symbol shows the level (E, 1 2 or 3 - in this example
level 2 is selected). The pre-selected dentist is only displayed very small in the level switching symbol.
Note
The device automatically saves the activation of level switching for the current den‐
tist.

Short instructions for use 4 Switching between levels and selecting a dentist 14
Note
Level switching is deactivated using the same key combination as activation.
▶ Briefly press "Preselect level" key to select the level.
Selection of dentist
▶ Level switching blocked: press "operator" key.
ðThe display switches to the settings menu.
or
▶ Level switching permitted: press "Preselect level" key for 4 seconds.
▶ Press the key for the desired dentist (dentist 1 to dentist 6).

Short instructions for use 5 Setting the timer 15
5 Setting the timer
5.1 Select the timer time
▶ To start a timer time, e.g. Timer 1, press the "Timer 1" button.
ðTime on the timer starts to run. A beep is issued after the timer time is elapsed.
▶ In order to stop the time on a timer, press the selected "Timer" button again.
5.2 Set the timer time
A maximum 59:59 minutes can be set using the timer.
▶ To set a timer time, e.g. Timer 1, press the "Timer 1" key until you hear a signal.
ðThe display switches to the settings menu for the timer time.
▶ Press the "Decrease value" key to reduce the time.
or
▶ Press the "Increase value" key to increase the time.
ðThe set time is shown on the display.
Symbol Function
The timer counts down (for example: 0:30 to 0)
The timer counts up (for example: 0 to 0:30)
▶ Press the "Save" button to save the value.
ðA beep confirms that the value has been saved.
or
▶ Press the "Back" button to return to the default (without saving).

Short instructions for use 6 Setting the handpieces 16
6 Setting the handpieces
6.1 Adjusting functions
Switch to the settings menu of the active element
Level switching must be activated for the selection of a level.
See also:
24 Switching between levels and selecting a dentist, Page 13
▶ Remove the handpiece from the holder.
▶ Briefly press "Preselect level" key to select the level.
▶ Press "Preselect level" button for 4 seconds in order to change settings.
ðThe display switches to the Settings menu of the selected instrument.
Saving the values
▶ Press the "Save" key to save the values. Single values or all values can be saved
simultaneously.
ðSaving is acknowledged by a beep.
Set the speed/power intensity (in levels 1 to 3 only)
▶ Press the "Decrease value" key to decrease the speed.
or
▶ Press the "Increase value" key to increase the speed.
ðThe speed is shown in the display.
Set the power intensity (in levels 1 to 3 only)
▶ Press the "Decrease value" key to decrease the speed/power intensity.
or
▶ Press the "Increase value" key to increase the speed/power intensity.
ðThe speed/power intensity is shown on the display.
Setting the cooling level
▶ Adjust the cooling with the "Cooling level" key.
Symbol Feature
No cooling

Short instructions for use 6 Setting the handpieces 17
Symbol Feature
Spray air cooling status
Spray cooling status
NaCl cooling status (optional accessory)
Requirement:
NaCl is preselected through foot control.
Activation through cross switch.
Setting the direction of motor rotation
Note
The direction of motor rotation can only be changed when the motor is at rest.
▶ Choose clockwise or counterclockwise rotation with the selection button for "Motor rotational di‐
rection".
Symbol Function
Clockwise rotation
CCW rotation
Setting the water/air heating (only with the multifunctional handpiece)
▶ Adjust the heating with the key for "Air/water heating".
Symbol Function
Air/water heating "on"
Air/water heating "off"
Setting the cold light
▶ Set the cold light with the "Cold light" key.
ðThe cold light intensity changes one level each time the key is pressed.
Symbol Function
Cold light "off"

Short instructions for use 6 Setting the handpieces 18
Symbol Function
Cold light to "level 0 - 9"
Turn the light On / Off (PiezoLED only)
▶ Briefly press the "Light" button to switch between "On" and "Off".
Symbol Function
Light "Off"
9Light "On"
Define operating mode (PiezoLED only)
Note
The selection of the mode depends on the treatment method and the tip used. For
information about the selection of an operating mode, please refer to the "Operat‐
ing modes P1 / P2 / P3 and E" section of the "PiezoLED Instructions for Use".
▶ Press the "Mode" key to select the operating mode.
Modes P1 / P2 / P3 / E are available for selection.
Symbol Feature
Mode P1
Mode E
6.2 Turbine
The following settings can be changed in the MEMOdent menu:
• Speed
• Cooling status
▪ Cold light intensity
6.3 INTRA LUX Motor KL 703 LED and COMFORTdrive
The following settings can be changed in the MEMOdent menu:
• Direction of motor rotation
• Speed
• Cooling status
▪ Cold light intensity

Short instructions for use 6 Setting the handpieces 19
6.4 PiezoLED
Note
Please comply with the enclosed "PiezoLED" Instructions for Use.
The following settings can be changed in the MEMOdent menu:
• Output intensity
• Operating mode (P1 / P2 / P3 / E)
• Cooling status (no cooling / spray water cooling)
▪ Light On/Off (intensity cannot be set)
6.5 Multi-function syringe
The following settings can be changed in the MEMOdent menu:
• Cold light intensity
▪ Air/water heating
6.6 KL 703 LED in ENDO mode (optional accessories)
Call up ENDO mode
CAUTION
Incorrect transmission ratio
Damage from incorrect speed / incorrect torque.
▶ Before using the endomotor, always check the speed and transmission ratio.
▶ Only use KaVo 1:1 reducing shanks 20LH or 20LP with 1:1 INTRA LUX head 68
LU (Mat. no. 1.003.7191) or 3:1 INTRA LUX head 66 LU (Mat. no. 1.004.4587).

Short instructions for use 6 Setting the handpieces 20
▶ Take the INTRAmatic LUX KL703 LED endo-motor from the holder.
▶ Press the "Additional motor drives" button.
ðThe display switches to the "ENDO" menu.
①Direction of motor rotation ②Torque mode
③Transmission factor ④ENDO Mode
⑤Speed ⑥Parameter memory
⑦Torque
Setting options
▶ Press the "Next" key to switch to the option menu.
ðThe most recently used menu is displayed.
Display Function
Option: 1. Transmission factor
Set the transmission factor to 1:1 or 3:1
Option: 2. Display of torque
Set the torque display in Ncm or in %
1:1 transmission: 100% = 2.5 Ncm
3:1 transmission: 100% = 8 Ncm
Option: 3. Autorev./Fwd. time
In Autorev./Fwd time mode, you can set the time
(1 to 10 seconds) in which the motor automatically
starts rotating to the right which makes it unnec‐
essary to stop with the foot control.
Options 1, 2 or 3 can be selected by pressing the "Back" and "Forward" keys.
The "Decrease value" and "Increase value" keys can be used to modify the parame‐
ters of the option.
▶ Press the "Enter" key to exit from the option menu.
ðThe changed parameters are saved.
Setting the parameters
There are six parameter memories (P1 to P6).