KBL MegaSun 7000a User manual

OPERATING INSTRUCTIONS
PRODUCT LINE
&

Copyright and Trademark
© Copyright 2019 KBL GmbH
This documentation only covers products manufactured by KBL GmbH. It must not be duplicated, photocopied,
translated or stored without prior special consent by KBL GmbH. Duplication on electronic media or in a machine-
readable form, either in whole or in part, is also prohibited.
is a registered trademark of KBL GmbH.
LICENSE INFORMATION AND SOURCE CODE
This product contains software components that are licensed by the holder of the rights as free software, or open
source software, under GNU General Public License, Version 2. You may obtain the source code for these soft-
ware components from the manufacturer on a data carrier (DVD) by submitting a request to our customer service
Department within three years after distribution of the product by the manufacturer. For providing the data carrier
and for shipping, we will charge you with 15 euros.
DISCLAIMER
All information given in this document correspond to the status quo at the date of publication but may be subject
to changes. Therefore, we do not accept any liability for, nor do we guarantee the accuracy and/or completeness
of the information.
EXPORT
Technical equipment and versions of the devices are in accordance with the legal prescriptions of the respective
country of destination. Export to the USA and Canada of the KBL products, listed in this guide, or operation of
the systems in these countries, are not permitted. KBL does not accept any manufacturers liability in case this
direction is not adhered to. It is expressly pointed out that any violation of the export/operation prohibition will
involve substantial risks of liability for the exporter and/or operator.
For instruction updates, please refer to https://media.kbl.de
TRANSLATION OF THE ORIGINAL OPERATING
INSTRUCTIONS
Version: BA-6808mod2018_B-en
Date: 04/2019
Item no: 0100036232
Tanning device name [tech.]: 6808
KBL GmbH
Ringstraße 24-26 · 56307 Dernbach · Germany
fon +49(0)2689.9426-0 · fax [phone]
eMail [email protected]
www.megaSun.de

Operating Instructions |megaSun 7000/7800 alpha
4
General information .............................................. 5
About these instructions ......................................... 5
Safety signs............................................................. 5
Signal words............................................................ 5
Definitions................................................................ 6
Transport ................................................................. 6
Old equipment disposal .......................................... 7
Setup location ......................................................... 7
Service..................................................................... 7
Safety notes ........................................................... 8
Intended use............................................................ 8
Foreseeable misuse ................................................ 8
Duties of the studio operator................................... 9
General safety advice.............................................. 9
Training of staff...................................................... 10
Measure to maintain operational safety ................ 10
Updating system software .................................... 10
Use of headphones ............................................... 10
Timer operation ..................................................... 10
Tanning times ........................................................ 10
Description of the tanning device...................... 11
Standards .............................................................. 11
Components.......................................................... 11
Connections - Audio ........................................... 12
Level adjustment studio music signal ................... 12
Operation using different audio sources ............... 12
Bluetooth connection ............................................ 13
Start-up ................................................................ 15
Operating modes................................................... 15
Tanning instructions............................................ 16
Instructions for the user ........................................ 16
Tanning times ........................................................ 17
Tanning mode ...................................................... 18
Pre selection at the touch screen.......................... 18
Starting the tanning session.................................. 22
Operation during the tanning session ................... 22
Basic functions...................................................... 23
Variable section of the interior control panel......... 24
Standby mode...................................................... 26
Service mode ........................................................ 26
LED boosters in standby mode............................. 26
Standby functions ................................................. 26
Set decorative lighting........................................... 29
Maintenance and cleaning ................................. 30
Cleaning and disinfection...................................... 31
Performing maintenance ....................................... 33
Maintenance intervals ........................................... 33
Maintenance by staff............................................. 35
Tools and aids ....................................................... 35
Unlocking the bench ............................................. 35
Acrylic panes......................................................... 35
Tubes ..................................................................... 36
Filter cartridges ..................................................... 37
Recording to an SD card....................................... 38
Aroma and aquaCool ............................................ 39
System messages ............................................... 41
Dimensions and distances .................................... 46
Contents

Operating Instructions |megaSun 7000/7800 alpha 5
About these instructions
This operating manual is intended for use by
• studio operator,
• user,
• staff,
• qualified, trained and authorized service technician.
Any person dealing with with this tanning device
must have read and understood these instructions.
This manual describes tanning devices equipped
with the maximum number of features.
Keep this manual ready to hand at all times.
Safety signs
This symbol indicates that general haz-
ards exist for the human health.
This symbol indicates that due to elec-
trical tensions hazards exist to the
human health.
This symbol indicates that due to UV
radiation hazards exist to the human
health.
This symbol indicates that due to fall-
ing loads hazards exist to the human
health.
This symbol indicates the danger of
pinching.
When closing and opening panels and
covers, you can pinch your hands.
This symbol indicates the danger of
burns from hot lamps and housing
parts.
If the tanning device was operated
before being opened, lamps and hous-
ing parts may be hot.
This symbol indicates that damages
may occur at the tanning device, at the
material or at the environment.
IMPORTANT INFORMATION
This symbol does not identify safety
notices, but states information for a bet-
ter understanding.
Signal words
DANGER
• Death or serious injury is imminent.
WARNING
• Death or serious injury is possible.
CAUTION
• Moderate or minor injury is possible.
General information

Operating Instructions |megaSun 7000/7800 alpha
6
Denitions
STUDIO OPERATOR
People who provide tanning devices to users on a
commercial basis. The studio operator is trained
to operate and maintain the tanning device. He is
responsible for the proper operation of the tanning
device as well as for compliance with the mainte-
nance intervals.
USER
A person who uses the tanning device.
STAFF
People who are responsible for the operation, clean-
ing and disinfection as well as for the general main-
tenance work and instruction of the user on how to
operate the tanning devices.
QUALIFIED, TRAINED AND AUTHORIZED
SERVICE TECHNICIAN
Qualified and safety-trained specialist personnel of
the manufacturer, or an outside company trained and
authorized by the manufacturer for the installation
and maintenance of KBL tanning devices.
Transport
WARNING
Overturning load
Danger of being crushed by heavy parts
of the equipment.
• Keep the safety distance to the trans-
port machine.
• Do not walk under the load.
• Wear safety shoes.
TRANSPORT BY FORKLIFT TRUCK
During transport the tanning device may
be damaged when using forklift forks that
are too short.
• Use only sufficiently long forks.
The tanning device is mounted on a pallet.
• Insert the forks carefully into the openings of the
pallet.
• Lift the load by a few centimeters.
• Transport the load carefully to the place of
installation.
OTHER MODES OF TRANSPORT
If a forklift truck cannot be used for transport, the
tanning device must be partially disassembled and
the parts must be transported individually to the
place of installation, e.g. using a dolly. Depending
on the weight of the components, lifting them might
require several people.

Operating Instructions |megaSun 7000/7800 alpha 7
Old equipment disposal
This tanning device consists of
components that cannot be thrown into the
household garbage!
Dispose of your old equipment in an environmentally
friendly manner after the end of its useful life. Metals
and plastics can be recycled. Electrical and elec-
tronic components must be disposed of as e-waste.
Fluorescent lamps must be dropped off at authorized
collection points for pollutants.
This helps to avoid damaging effects to the envi-
ronment and human health caused by improper
disposal.
This makes a valuable contribution to recycling and
other forms of utilization of old electrical and elec-
tronic equipment.
You can obtain information about environmentally
friendly disposal from your local government or the
municipal administrations.
CAUTION
Risk of mercury toxicity
Risk of mercury toxicity after a lamp
breakage.
• Ventilate the room / environment at least
15 minutes before disposing the lamp
fragments.
Setup location
Operation only in dry rooms with sufficient airing and
ventilation.
Do not operate the tanning device in
locations with aggressive environmen-
tal conditions (e.g. salty air or air con-
taining chlorine).
DANGER OF OVERHEATING BY OBSTRUCTION
OF THE AIRFLOW
Avoid in any case a change, obstruction or block-
age of the air inflow and outflow area to the tanning
device or to make any unauthorized changes to the
tanning device. The manufacturer shall bear no liabil-
ity for damage or injuries resulting from such actions.
• Maintain the minimum distances from ceiling, bot-
tom and the walls! Dimensions are given in chapter
technical data .
Insufficient air supply leads to overheat-
ing which may result in damaging the
tanning device!
OPERATION IN MOBILE FACILITIES
CAUTION
Crushing hazard caused by sudden
movements
The tanning device is unsuitable for oper-
ation in mobile facilities (buses, trains,
ships).
• The tanning device must be adapted
in order to ensure trouble-free oper-
ation when used in mobile facilities.
DIFFERENCE IN TEMPERATURE
Risk of damage by switching on the
power supply voltage.
When there are great differences in tempera-
ture between the transportation route and the
installation site the tanning device shall not be
put into operation immediately after being set
up.
• Before connecting the tanning device
to the power supply, wait at least for
2 hours.
Service
For all service-related questions, please contact your
responsible specialist dealer.

Operating Instructions |megaSun 7000/7800 alpha
8
This chapter provides a summary of general infor-
mation on safety and proper handling of the tanning
device. More specific safety advice is given in other
chapters of the operating manual.
Intended use
This tanning device is intended to be used for the
tanning of one single person at a time. This person
must not fall in one of the categories mentioned
below, otherwise using the tanning equipment is
prohibited for him or her. The following individuals
must not use the tanning device:
• Persons under 18 years of age.
• Persons, who are suffering or have suffered from
skin cancer or have a predisposition toward this,
or those whose first-degree relatives are suffering
or have suffered from malignant melanoma (black
skin cancer).
• Persons taking photosensitive medications.
• Persons, who are being treated by a physician for
conditions associated with photosensitivity.
• Persons suffering from acute sunburn.
• Persons, who are prone to freckles.
• Persons with atypical discoloured skin areas or/
and with more than five atypical moles with a
diameter of 5 millimetres or more and persons with
more than 16 moles with a diameter greater than
or equal to 2 millimetres. If in doubt, consult a phy-
sician!
• Persons, who had several severe sunburns as chil-
dren.
• Persons with naturally red hair colour.
• Persons, who do not tan at all or cannot tan with-
out getting sunburn.
• Persons, who have a predisposition toward sun-
burn.
Lie down on the bench in a straight position and with
physical contact to the bench. Choose a suitable
position to reach the interior control panel at all times
during the tanning.
Foreseeable misuse
• This tanning device is not designed to be used by
persons with reduced physical, sensory or mental
abilities and lack of experience and/or insufficient
knowledge.
• During operation, no other person may remain in
the radiation area of the tanning device.
• Children should be supervised to ensure that they
do not play with the tanning device.
• The irradiation of animals, especially reptiles.
• Any type of use that differs from the provisions
under the chapter Intended use is considered mis-
use.
Safety notes

Operating Instructions |megaSun 7000/7800 alpha 9
Duties of the studio operator
The studio operator is responsible for:
• Informing users of potential risks related to the
application.
• Ensuring that all hazard notices and safety instruc-
tions on the tanning device are legible, observed,
and not removed.
• Ensuring that safety equipment (such as thermal
circuit breakers) is not removed, deactivated or
otherwise bypassed.
• Ensuring that operating, cleaning and maintenance
instructions are available.
• Through training and instruction of staff, ensuring
the proper use (operation, control and mainte-
nance) of the tanning device.
Operating instructions must enable the
safe operation and control of the tanning
device under consideration of national
environmental protection and occu-
pational health and safety provisions.
Special characteristics of the studio
operation and resulting insights also have
to be taken into account.
• Directive 89/391/EEC applies in the EU.
• The Industrial Safety Directive (Betr-
SichV) applies in Germany.
The manufacturer assumes no liability for damages
or injuries due to improper use or failure to observe
these operating instructions.
Only use replacement parts approved by KBL!
Only replace the tubes and high-pressure lamps with
the type identified on the tanning device, otherwise
the operating permit and warranty will be voided!
General safety advice
• This tanning device was designed exclusively for
use in a commercial environment.
• Follow all instructions given in this manual. In addi-
tion, observe all relevant statutory provisions and
regulations, also those applicable in the country of
operation.
• The tanning device may only be installed and set
up by trained and authorised personnel having
received safety-related instruction.
• Arbitrary modifications or conversions of the equip-
ment are not permissible.
• Observe all danger signs and safety notices
attached to the equipment.
• Safety notices must not be removed, and safety
equipment must not be disabled or removed.
• The tanning device must only be operated when in
perfect working condition.
• Never operate the tanning device with the outer
covers or acrylic panes removed.
• Absolutely observe the maintenance frequencies
indicated in the maintenance plan.
• Pay attention to the load limit of the bench pane
(tanning bed units only).
• The bench must only be opened with bench pane
folded down.
The canopy is not designed to carry
additional loads.
• Do not lean over the equipment cover.

Operating Instructions |megaSun 7000/7800 alpha
10
Training of staff
The studio operator is obligated to train his staff and
to instruct them in the established legal and accident
prevention regulations. He must ensure that his staff
has understood and observes these instructions.
This includes:
• Operating instructions.
• Safety instructions.
• Information regarding intended use and foreseea-
ble misuse.
• Cleaning/disinfection and maintenance instruc-
tions.
• The instructions and additional information from
the manufacturer must be available to the staff at
their workplace. Regularly test your staff‘s safety
consciousness and awareness of the risks, taking
into account the operating instructions of the tan-
ning device.
• Make sure that the cleaning/disinfection intervals
are complied with, especially the cleaning and dis-
infection of the tanning device after every use.
• Make sure that your staff provides the customers
with appropriate advice, especially regarding use
times, possible risks and the operation of the tan-
ning device.
Measure to maintain opera-
tional safety
To maintain operational safety, a recurring inspec-
tion of the tanning device has to be performed every
12 months from the commissioning date by KBL
Customer Service or an approved specialised firm.
Inspections and maintenance must be recorded in
the inspection record and log book for the tanning
device! (KBL article no.: 1100117110)
Updating system software
Risk of damage by switching off the
power supply voltage.
Disconnecting power supply during the
update process, will lead to damage of elec-
tronic components.
• Make sure that the tanning device is not dis-
connected from the power supply voltage dur-
ing the update.
• To accomplish the update, download the update
software offered by KBL.
• For detailed information about the update process
refer to the help files included in the software pack-
age.
Use of headphones
CAUTION
Hearing damage possible
Using headphones or earphones at high
volume may result in permanent hearing
damage.
• Do not set the volume too high.
Timer operation
The tanning device must be controlled via an exter-
nal timer that meets the requirements of EN 60335-
2-27, cl. 22.105
Tanning times
Adhering to tanning times and schedules is essential.

Operating Instructions |megaSun 7000/7800 alpha 11
Description of the tanning device
Standards
This tanning device complies with the following
standards in their respectively applicable version:
• EN 60335-2-27
• EMC Directive 2014/30/EU
• Low Voltage Directive 2014/35/EU
Components
The tanning device basically consists of the following
components:
• The canopy including 20 tubes, 3 facial tanners, 40
LED boosters, exterior- and interior control panel.
• The side part including 6 tubes and face tanner.
• The base part including 20 or 24 tubes and the
electronic unit.
Depending on the model also with further, optionally
available components.
1aquaCool - nozzles (optional equipment)
2Exterior control panel (touch screen)
3Interior control panel
4LED booster
5Facial tanner
6Shoulder tanner
7Line connectors (In/Out)
(Player/Headset)
8Base (faceplate)
9Bench pane
10 P2 tubes
11 Side pane
12 Canopy pane
13 Air nozzles
14 Canopy
④
③
⑤
②
⑥
①
⑦
⑪
⑨
⑩
⑫
⑬
⑧
⑭
Example: MS 7000 alpha extraSun

Operating Instructions |megaSun 7000/7800 alpha
12
Connections - Audio
For information on further tanning
device connections, refer to your
ASSEMBLY INSTRUCTION in the sec-
tion “ Connections & Initial operation ”.
Level adjustment studio music
signal
The voice / audio system components are built in the
middle of the bench part (vacuum housing) of the
tanning device. The potentiometer which serves of
the external audio signal is located on the left side
of the housing. To avoid overdrive, select the level
adjustment accordingly. The level setting depends
on the strength of the external signal and should be
carried out by a service engineer. Adjustment of the
sound level can only be conducted in the service
menu.
Operation using different
audio sources
The audio source can be changed via the interior
control panel.
The tanning device can be operated using the
following audio sources:
INTERNAL MP3 PLAYER
When using the internal MP3 player, you can either
play the music tracks that are originally supplied on
the SD card, or you can record your own tracks to
the SD card.
EXTERNAL AUDIO SOURCES
LINE-IN
As an external audio source, you can connect
devices ranging from the standard-line level to low
loudspeaker levels.
These sources comprise:
• Studio music
• External players such as MP3 players, mobile
phones (cell phones), I-pods, etc.
EXTERNAL 100 V AUDIO SIGNAL ON STUDIO
CHANNEL (OPTIONAL FEATURE)
If you decide for a connection to a 100 V audio
system, you will need a transformer (KBL no.: 9100
0170 00) for the transmission of the audio signal.
This connection must be made by trained and
authorised personnel.
EXTERNAL PLAYERS & HEAD-/EARPHONES
A line connection has been integrated on the right-
hand side of the bench’s head end so that the tan-
ning device user can connect his or her own player
such as an MP3 player, an iPod, etc. Take hold of the
jack plug and pull the cable out of the opening. Then
connect the jack plug to the earphone jack of your
player. Then select ”MP3 ext.” as the audio source
from the interior control panel of the tanning device
before you start playing your own tracks from the
player.

Operating Instructions |megaSun 7000/7800 alpha 13
The tracks can only be selected via the user’s own
player. The volume can be controlled via the control
panel of the tanning device and also via the corre-
sponding operating elements provided by the user’s
player.
Either a headphone or an earphone with a 6.3 mm
jack plug can be used. The corresponding connec-
tor socket is located next to the line connector. The
audio signal is switched over automatically.
MP3
ATTENTION
• Danger of damage to the player due to
overheating.
• Do not place your player within areas that are
directly exposed to UV radiation.
Bluetooth connection
To connect an external player (smartphone etc.) wire-
lessly to the tanning device an optional Bluetooth
interface is available.
CONNECT EXTERNAL PLAYER
A Bluetooth connection can be established in
standby and during tanning mode.
Make sure that you are within the recep-
tion area (about 2 meters).
Make sure that your player is configured
to search for other bluetooth devices.
Should this not be the case, enable blue-
tooth manually. To do so, please read the
instructions for your player.
• Depending on your settings the search will be
performed automatically or manually. All available
Bluetooth devices within reach will be listed after
a short time.
• Among the available tanning devices choose
“megaSun Sound”. In the service menu, a trailing
number (01, 02, 03, ...) can be added to tanning
device name.
• If necessary confirm the shown code and connect
again. Not every smart phone asks for a code.
megaSun 01
megaSun 01

Operating Instructions |megaSun 7000/7800 alpha
14
• A two-time beep indicates that your player is con-
nected to the tanning device.
megaSun 01
megaSun 01
• Set your player to a medium volume level and
start the music.
• Adjust the volume level on your player.
• During the tanning session, the volume control has
to be done at the tanning device.
DISCONNECT EXTERNAL PLAYER
An existing connection is disconnected automati-
cally after tanning.
The connection is automatically disconnected if the
tanning session is not started within 6 minutes.
COMPATIBILITY OF BLUETOOTH DEVICES
KBL GmbH attaches great importance to hardware
compatibility. Due to the large number of manufac-
turers, KBL can not guarantee a 100 % compatibility.
In rare cases, it may happen that a bluetooth con-
nection can not be established.
CORRECTIVE ACTION
Each bluetooth device offers a list of paired devices.
Delete the older entries in this list which have a pro-
file that overlaps with the ones for which you want to
pair your player.
Start the bluetooth device detection again.

Operating Instructions |megaSun 7000/7800 alpha 15
Start-up
Commissioning is performed by the manufacturer or
qualified, trained and authorized service technicians.
The tanning device is operational on delivery.
As the studio operator, you are responsible for com-
pliance with the electrical regulations applicable at
the installation location.
If the tanning device has not been used for an
extended period of time, it has to be inspected by
qualified, trained and authorized service technicians
before it is put back into operation.
BEFORE SWITCHING ON FOR THE FIRST TIME
• Fix the supplied warning sign or one with the
following wording permanently to the wall close to
the tanning device:
Warning
• UV-radiation can cause eye and skin damage as
well as skin aging and possibly skin cancer. Ask
the studio staff for further information.
• Wear protective goggles.
• Certain medicines or cosmetics can increase the
sensitivity of the skin to UV radiation. If in doubt,
consult a physician.
• Determine the pre settings for the tanning device in
the service menu.
• Check correct installation of fluorescent tubes. The
tube labelling must be visible, otherwise no tanning
effect may be obtained.
• Store these Operating Instructions in a place that
allows for easy access at any time.
Operating modes
STANDBY MODE
The tanning device is in an idle state, i.e. it is
connected to the mains but is currently not being
used. The tubes and the tanning lamps are switched
off. From the standby mode, you can change over to
the tanning mode or to the service mode.
TANNING MODE
The tubes and the tanning lamps are switched
on and a tanning session is in progress. While the
tanning device is in tanning mode, the settings for
the ongoing tanning session can be changed via the
interior control panel.
SERVICE MODE
In the service mode, the tanning device is configured
for the tanning mode. Various values can be displayed
and test functions can be carried out.
FAN RUN-ON
After the tanning session, the fan runs on for 3
minutes in order to cool down the tanning device.
The fan power is automatically decreased as the
tubes cool down.

Operating Instructions |megaSun 7000/7800 alpha
16
Tanning instructions
As a rule, an averagely tanning skin has achieved
a uniform tan after three to five tanning sessions.
These sessions should take place every second day.
To preserve the suntan achieved, one or two tanning
sessions per week are normally sufficient.
Instructions for the user
Observe the following tanning instructions:
GENERAL
• Any person that complies with the requirements
laid down in the chapter “Intended use” may use
the tanning device.
• Never exceed your personal minimum erythema
dose (MED). Follow the prescribed exposure times.
• If reddening of the skin (erythema) occurs hours
after tanning, temporarily stop tanning. After a
week the tanning can be resumed at the beginning
of the tanning table.
• If unexpected effects (such as itching) occur within
48 hours after the first tanning session, you should
consult a physician before tanning again.
• Once final tanning has been achieved, additional
tanning is only possible by greatly exceeding the
permissible tanning times. It is essential to avoid
this.
• UV-radiation from the sun or from UV-devices can
cause irreversible skin or eye damage. These bio-
logical effects depend on the type and amount of
radiation as well as on the individual sensitivity of
the skin.
• In cases of pronounced individual sensitivity or allergic
reactions to UV-radiation, a physician should be con-
sulted before beginning tanning.
• After excessive exposure to radiation, the skin may
exhibit sunburn. Excessively repeated exposure to
UV radiation of sunlight or UV appliances can result
in premature ageing of the skin and in a higher risk
of skin cancer.
• The unprotected eye can suffer from surface
inflammation, and in certain cases, e.g. after a cat-
aract operation, excessive radiation can damage
the retina. After many repeated sessions, a cata-
ract may form.
• Seek medical advice if persistent swellings or sores
develop on the skin or if pigmented moles change
in appearance.
FOR EACH TANNING SESSION
• Always wear the supplied protective goggles. Con-
tact lenses or sunglasses are no substitute for the
protective goggles!
• Remove cosmetics before tanning and do not use
any sunscreen, or products that accelerate tanning.
• Allow for at least 48 hours to pass between
sessions.
• After a tanning session in a studio, do not take
another sunbath out of doors on the same day
• Protect sensitive areas, such as scars, tattoos, and
genitalia, from radiation.

Operating Instructions |megaSun 7000/7800 alpha 17
Tanning times
Please refer to the following tables for learning the individually applicable tanning times that depend on the skin
type. If the tanning session sequence is interrupted for 4 weeks or more, you will have to start with the first ses-
sion again.
The interval between two tanning sessions must be at least 48 hours.
The times mentioned in the tanning schedules only apply on the condition that tubes are replaced according
to the maintenance intervals stipulated in the section “ Maintenance and cleaning ” (Tubes equipment see table
“ Technical data ”).
7000 ALPHA & 7800 ALPHA
EU TANNING SCHEDULE - according to UV-Type III and 0,3W/m2in compliance with EN 60335-2-27
Skin type
I II III IV V VI
1. Session 6 min 6 min 6 min 6 min 6 min 6 min
2. Session 6 min 7 min 7 min 8 min 10 min 11 min
3. Session 7 min 7 min 9 min 10 min 14 min 17 min
4. Session 7 min 8 min 10 min 12 min 19 min 22 min
5. Session 8 min 9 min 12 min 14 min 23 min 28 min
6. Session 9 min 10 min 13 min 16 min 27 min 33 min
7. Session 9 min 11 min 15 min 19 min 32 min 33 min
8. Session 10 min 12 min 16 min 21 min 33 min 33 min
9. Session 10 min 13 min 18 min 23 min 33 min 33 min
10. Session 11 min 14 min 19 min 25 min 33 min 33 min
Max. number of tanning sessions per year
extraSun 63 50 37 28 21 21
hybridSun 83 65 48 36 28 28
smartSun 90 71 52 40 30 30
beautySun 84 67 48 37 21 18

Operating Instructions |megaSun 7000/7800 alpha
18
Tanning mode
WARNING
Excessive dose of UV radiation
Excessively prolonged tanning ses-
sions may cause severe damage to skin
and eyes.
• Never operate the tanning device with a
defective timer.
• Observe the tanning times given in the
tanning schedule.
The following explanations and functions refer to a
tanning device that is fully equipped with all features.
Pre selection at the touch
screen
Before starting your tanning session, the touch
screen allows you to choose certain tanning options
in advance.
Simply select your preferences and enjoy your
tanning session from the very beginning.
PRINCIPALS OF OPERATION
There is a touch screen panel in the middle of the front
part of the canopy. Depending on the configuration
of the tanning device, up to eleven functions are
available for you to make your choice.
Your choice remains stored for 3 minutes.
If you do not start your tanning session within this
time, the system is reset to the default settings
defined in the service menu.
Browse through all functions
Function group direct selection

Operating Instructions |megaSun 7000/7800 alpha 19
sun
SELECTION
MARKER
PRE - SELECTION OPTIONS
sun - tanning level pre selection
audio - audio source pre selection
voice - megaVoice on / off
aircon - airconditioning on / off
aroma - aromatization on / off
aqua - aquaCool on / off
ICON STATUS (EXAMPLE)
Active options light up in yellow.
Inactive (disabled) options are white.
If the option is not available, or has not
been activated in the service menu, the
icon remains grey.
• During the fan run-on the pre selection
menu is blocked.
• The default settings of the pre selection
menu can be determined in the service
menu.

Operating Instructions |megaSun 7000/7800 alpha
20
sun
ACTIVE SELECTION
LIGHTS YELLOW
Tanning level pre selection
Optimum tanning conditions suited to meet the
requirements of individually different pretan lev-
els are achieved by specifically adapting the UV
spectrum.
Use the three buttons BASIC, MEDIT. and CARIBIC
to choose the setting that matches your individual
level of skin pigmentation.
The option of preselecting the tanning level is
only available with ICS (Intelligent control system)!
BASIC
Equal proportions of UV-A and UV-B result in a
balanced tanning effect.
MEDIT (MEDITERRAN)
A higher proportion of UV-A results in faster tanning.
CARIBIC
A higher proportion of UV-B helps achieve a more
intense tan.
audio
Audio source pre selection
You can pre select one out of three different audio
sources.
During the tanning session, you can change the
audio source any time via the interior control panel.
SOLARIUM (MP3-INTERN)
During the tanning session, you will listen to the
tracks played by the internal MP3 player of the tan-
ning device.
SALON (STUDIO)
You will listen to the music that is provided externally
by the studio operator.
BLUETOOTH (MP3-EXTERN)
Use your own bluetooth player (smartphone etc.) or
plug in your cable tied MP3-player like iPod etc. into
the line-in headphone jack at the head end of the
tanning device.
OFF
Music off.