Kemppi MXF 63 User manual

FastMig
MXF 63, 65, 67
Operating manual
Brugsanvisning
Gebrauchsanweisung
Manual de instrucciones
Käyttöohje
Manuel d’utilisation
Manuale d’uso
Gebruiksaanwijzing
Bruksanvisning
Instrukcja obsługi
Manual de utilização
Инструкции по эксплуатации
Bruksanvisning
操作手册
EN
DA
DE
ES
FI
FR
IT
NL
NO
PL
PT
RU
SV
ZH

OPERATING MANUAL
English

EN
CONTENTS
1. Preface........................................................................................................... 3
1.1 General ....................................................................................................................................... 3
1.2 About FastMig products...................................................................................................... 3
2. Installation.................................................................................................... 4
2.1 Machine introduction, MXF 65, MXF 67 and MXF 63................................................ 4
2.2 Connection of system........................................................................................................... 5
2.3 Assembly of MIG/MAG system.......................................................................................... 6
2.4 Accessories corresponding to wire diameter.............................................................. 7
2.5 Welding gun selection.......................................................................................................... 7
2.6 Mounting and locking of wire spool............................................................................... 7
2.7 Loading the ller wire and automatic feed .................................................................. 8
2.8 DuraTorque™ 400, 4-wheel wire feed mechanism..................................................... 8
2.9 Wire liners................................................................................................................................10
2.10 Adjustment of pressure arms...........................................................................................11
2.11 Adjustment of spool brake...............................................................................................11
2.12 Burn back time ......................................................................................................................11
2.13 Earth return cable.................................................................................................................11
2.14 Shielding gas..........................................................................................................................12
2.15 Main switch I/O .....................................................................................................................13
2.16 Operation of cooling unit, FastCool 10 ........................................................................13
2.17 MXF hanging kit....................................................................................................................14
3. Control panel operations........................................................................ 15
3.1 Connecting and mounting...............................................................................................15
4. Welding software delivery prole........................................................ 16
5. Panel button functions ........................................................................... 19
5.1 PF 63 and PF 65 control panel for FastMig Pulse......................................................19
5.2 PF 63 and PF 65 control panel button functions......................................................20
5.3 SF 51 and 54 control panel for FastMig KMS..............................................................23
5.4 SF 52W and 53W control panel for FastMig KMS .....................................................24
5.5 MS 200 and MS 300 control panel for FastMig M.....................................................25
5.6 MR 200 and MR 300 control panel for FastMig M ....................................................26
6. Basic troubleshooting ............................................................................. 27
7. Maintenance.............................................................................................. 28
7.1 Daily maintenance...............................................................................................................28
7.2 Service shop maintenance ...............................................................................................28
8. Disposal of the machine ......................................................................... 28
9. Ordering numbers.................................................................................... 29
10. Technical data............................................................................................ 33
FastMig MXF 63, 65, 67
2

EN
1. PREFACE
1.1 General
Congratulations on choosing the FastMig MXF equipment. Used correctly, Kemppi products
can signicantly increase the productivity of your welding, and provide years of economical
service.
This operating manual contains important information on the use, maintenance and safety of
your Kemppi product. The technical specications of the equipment can be found at the end
of the manual.
Please read the operating manual and the safety instructions booklet carefully before using
the equipment for the rst time. For your own safety and that of your working environment,
pay particular attention to the safety instructions in the manual.
For more information on Kemppi products, contact Kemppi Oy, consult an authorised Kemppi
dealer, or visit the Kemppi web site at www.kemppi.com.
The specications presented in this manual are subject to change without prior notice.
Important notes
Items in the manual that require particular attention in order to minimise damage and
personal harm are indicated with the ’NOTE!’notation. Read these sections carefully and follow
their instructions.
Disclaimer
While every eort has been made to ensure that the information contained in this guide
is accurate and complete, no liability can be accepted for any errors or omissions. Kemppi
reserves the right to change the specication of the product described at any time without
prior notice. Do not copy, record, reproduce or transmit the contents of this guide without
prior permission from Kemppi.
1.2 About FastMig products
Kemppi FastMig™ MXF 63, MXF 65 and MXF 67 are wire feeders designed for demanding
professional use. MXF 63 is intended for 200 mm wire spool, MXF 65 and MXF 67 for 300 mm
wire spool. Wire feeders can be used with FastMig Pulse, FastMig KMS and FastMig M power
sources.
Which alternative panel to choose for MXF 63, 65 and 67 depends on the used power source
i.e. FastMig KMS becomes compatible by connecting SF 51, SF 52W, SF 53W or SF 54 control
panels with MXF wire feed unit, and in the case of PF 63 and PF 65 control panels FastMig
Pulse power source can be connected. With FastMig M the MR 200, MR 300, MS 200 or MS 300
panels are used. Operation of wire feed units is controlled and adjusted by microprocessor. By
adding an optional synchronization unit (MXF Sync 65), SuperSnake sub-feeder device may be
connected to MXF 63, 65 and 67.
This manual provides instructions on the start-up and use of the MXF 63, 65 and 67 MIG/MAG
wire feeding units.
3
© Kemppi Oy / 1515

EN
2. INSTALLATION
2.1 Machine introduction, MXF 63, MXF 65 and MXF 67
WF #
5.
5.
1.
1.
3.
2.
2.
3.
4.
1. Control panel
2. Remote control connector
3. Sub-feeder sync connector (kit optional)
4. Gun water connections (cooling optional)
5. Euro gun connector
6.
7.
8.
9.
8.
7.
6.
9.
6. Shielding gas connection
7. Connection for control cable
8. Welding current cable connector
9. Lead-in and clamping of cooling liquid hoses
FastMig MXF 63, 65, 67
4

EN
10. 11.
10. Wire Inch button
11. Gas Test button
2.2 Connection of system
2.2.1 Liquid cooled system: FastMig power source + MXF + FastCool 10
1.
4.
8.
2.
3.
9.
5.
6.
7.
1. MXF wire feed unit
2. FastMig power source
3. FastCool water cooler and power connection
4. Gas supply
5. MMA electrode holder
6. Remote control device
7. Liquid cooled welding Gun
8. Power cable
9. Earth return lead and clamp
5
© Kemppi Oy / 1515

EN
2.2.2 Air cooled system: FastMig power source + MXF
1.
4.
5.
6.
8.
2.
3.
7.
1. MXF wire feed unit
2. FastMig power source
3. Gas supply
4. MMA electrode holder
5. Remote control device
6. Air cooled welding gun
7. Power cable
8. Earth return lead and clamp
2.3 Assembly of MIG/MAG system
Assemble the units in the order mentioned below. Follow the additional mounting and
operating instructions delivered with each package.
1. Installation of power source
Read paragraph: ”Installation”in the operation instructions for FastMig power sources, and
complete the installation according to that advice.
2. Mounting of power sources to transport wagon
Read and follow the instructions given in the transport cart installation/assembly manual.
3. Mounting the FastMig MXF wire feed unit to the power source
Remove the cover sticker on top of the power source. Screw the fastening pivot into the
power source – hand tighten only. Place the supplied plastic spacers over the pivot. Lift the
MXF wire feeder into place, locating over the pivot.
4. Connecting cables
Connect the cables in accordance with the equipment notes provided in this manual.
The polarity of the welding wire (+ or –) can be selected by connecting the wire feed unit to
either the positive or the negative power source terminals.
Most MIG/MAG applications run the wire feed unit connected to the positive terminal of the
power source.
5. Mounting FastMig wire feed units to boom and swing arms
When mounting wire feed units to boom and swing arms, the unit must be electrically
isolated from both.
Suspension angle of wire feed unit can be changed by moving the xing point in handle.
FastMig MXF 63, 65, 67
6

EN
2.4 Accessories corresponding to wire diameter
Colour coded wire feed rolls and guide tubes are available to suit a variety of ller wire types
and sizes. Drive roll groove geometry and design vary depending on the application. Further
details are available in the spare part tables.
Please ensure you select the correct drive rolls and guide tubes from the table to suit your
particular welding application.
2.5 Welding gun selection
Please ensure that the welding gun selected is suitable for the target application. Check the
gun manufacturer's specication and ensure the gun meets the welding duty requirements.
Also consider the extra heating eects of Pulse MIG/MAG welding on the gun selected.
Kemppi gun products are designed to meet many dierent applications. Special wire liners
and contact tips are available for dierent wire types and sizes.
Distance wire feeding is accommodated with WeldSnake and SuperSnake products in either
air or liquid cooled models.
Thermal and load protection is also designed to some Kemppi Gun models and feed units, so
carefully consider your requirements and consult your local Kemppi sales team to ensure you
choose the correct alternative for your needs.
2.6 Mounting and locking of wire spool
NOTE! Check that the ller wire spool is correctly mounted and locked into position. Ensure the
spool is not damaged or deformed in such a way that it can rub or cha against the internal
surface of the wire feed unit chassis or door. This may result in increased drag, impacting on weld
quality. This may also result in long term wire feed unit damage, rendering the unit unserviceable
or unsafe to use.
7
© Kemppi Oy / 1515

EN
2.7 Loading the ller wire and automatic feed
Automatic wire feed makes wire spool changes faster. When changing the wire spool, the
pressure of feed rolls need to be released.
Simply ensure that the groove of the feed roll matches the diameter of ller wire used. Release
the wire end from the spool and cut o any deformed section. Be careful the wire does not
spill from the spool sides.
Straighten about 20 cm of ller wire and ensure the tip has no sharp edges. File if necessary, as
a sharp wire edge may damage the wire gun liner - particularly softer plastic liners.
Present the ller wire tip to the back of the wire feed rolls and press the Wire Inch button on
the wire feed panel or use the switch inside the wire spool cabinet. Feed the wire to the gun
contact tip and prepare to weld.
NOTE! Smaller diameter ller wires may need to be loaded manually – with the feed roll pressure
arms released. This is because it is easy to overestimate the pressure required to feed these smaller
ller wires. Too high feed roll pressures can easily deform ller wires and contribute to later feeding
problems.
2.8 DuraTorque™ 400, 4-wheel wire feed mechanism
Wire guide tubes
ø mm outlet tube middle tube inlet tube
Ss, Al,
(Fe, Mc, Fc)
plastic
0.6 W007437 W007429 W007293
0.8 – 0.9 W007438 W007430 W007294
1.0 W007439 W007431 W007295
1.2 W007440 W007432 W007296
1.4 W007441 W007433 W007297
1.6 W007442 W007434 W007298
2.0 W007443 W007435 W007299
2.4 W007444 W007436 W007300
Fe, Mc, Fc
metal
0.8 – 0.9 W007454 W007465 W007536
1.0 W007455 W007466 W007537
1.2 W007456 W007467 W007538
1.4 – 1.6 W007458 W007469 W007539
2.0 W007459 W007470 W007540
2.4 W007460 W007471 W007541
24.8.2005 12:55
FastMig MXF 63, 65, 67
8

EN
Wire feed rolls, plastic
ø mm lower upper
Fe, Ss,
(Al, Mc, Fc)
V-groove
0.6 W001045 W001046
0.8 – 0.9 W001047 W001048
1.0 W000675 W000676
1.2 W000960 W000961
1.4 W001049 W001050
1.6 W001051 W001052
2.0 W001053 W001054
2.4 W001055 W001056
Fc, Mc, (Fe)
V-groove, knurled
1.0 W001057 W001058
1.2 W001059 W001060
1.4 – 1.6 W001061 W001062
2.0 W001063 W001064
2.4 W001065 W001066
Al, (Fc, Mc, Ss, Fe)
U-groove
1.0 W001067 W001068
1.2 W001069 W001070
1.6 W001071 W001072
Wire feed rolls, metal
ø mm lower upper
Fe, Ss,
(Al, Mc, Fc)
V-groove
0.8 – 0.9 W006074 W006075
1.0 W006076 W006077
1.2 W004754 W004753
1.4 W006078 W006079
Fc, Mc, (Fe)
V-groove, knurled
1.0 W006080 W006081
1.2 W006082 W006083
1.4 – 1.6 W006084 W006085
2.0 W006086 W006087
Al, (Fc, Mc, Ss, Fe)
U-groove
1.0 W006088 W006089
1.2 W006090 W006091
1.6 W006092 W006093
NOTE! Mount the lower feed roll, ensuring that the pin on the shaft ts in the cut on the feed roll.
9
© Kemppi Oy / 1515

EN
2.9 Wire liners
Designed to suit specic ller wire materials and applications, Kemppi liners support the
ller wire and ensure reliable delivery to the welding arc. The liner selection tables describe
gun type, ller material, liner colour, item code and gun length. Steel spiral liners carry the
same colour coding as Kemppi machine feed rolls and drive rolls, making wire size, liner and
drive roll matching easier if the gun is connected to Kemppi equipment. Steel spiral liners are
suitable for welding solid and cored ller wires of corresponding wire diameter.
Kemppi DL Chili -Teon liners are the latest solution for reliable feeding of aluminium, stainless
steel, acid-resistant and solid steel ller wires. Kemppi’s patented technology, two layer DL
Chili liner material signicantly reduces friction losses between the ller wire material and
liner wall, ensuring reliable and worry-free feeding for listed wires types, even with guns up to
8 meters in length. Please refer to the following tables to ensure accurate selection of liners for
your chosen welding gun and application.
Wire liners for MMT, PMT guns
Steel/cored wire Filler wire ø, mm Order number, 3 m Order number, 4.5 m
0.6…0.8 4188571 4188572
0.9…1.2 4188581 4188582
1.4…1.6 (1.2) 4188591 4188592
1.6…2.0 4188601 4188602
2.0…2.4 4188611 4188612
2.8…3.2 4188621 4188622
Steel/Aluminium/
Stainless steel
Filler wire ø, mm Order number, 3 m Order number, 4.5 m
DL Chili 5.9/1.5 0.6…1.0 W005920 W005937
DL Chili 5.9/2.0 1.0…1.2 W005921 W005938
DL Chili 5.9/2.5 1.2…1.6 W005922 W005939
Aluminium
DL Chili 5.9/3.0 1.6 W007671 W007957
Wire liners for Weldsnake
Steel/Aluminium/
Stainless steel
Filler wire ø, mm Order number, 6 m Order number, 8 m
DL Chili 5.9/1.5 0.6…1.0 W005943 W005946
DL Chili 5.9/2.0 1.0…1.2 W005944 W005947
DL Chili 5.9/2.5 1.2…1.6 W005945 W005948
Aluminium
DL Chili 5.9/3.0 1.6 W007672 W007958
FastMig MXF 63, 65, 67
10

EN
2.10 Adjustment of pressure arms
Adjust the drive pressure to the ller wire with the thumb screws mounted over the pressure
arms. Notice the graduated scales indicating load. The load applied should be sucient to
overcome a light braking force applied by hand to the ller wire, as it exits the welding gun
contact tip.
For smaller diameter and soft ller wires, less feed pressure is required. It should be possible to
apply a light breaking force to the ller wire by hand, as it exits the gun contact tip. But slightly
more wire ow restriction should render the drives rolls to slip slightly over the ller wire
without deforming the wire.
NOTE! Excessive pressure causes attening of the ller wire and damage to coated or cored ller
wires. It also causes undue wear of the feed rolls and increases gearbox load, so reducing service
life.
2.11 Adjustment of spool brake
Brake force is adjusted through the hole behind the locking clip. Remove the locking clip by
hand, and adjust the tension and pressure to the friction pads mounted inside with a screw
driver. See diagram and location A.
A
The load applied varies depending on the size and weight of the ller wire and spool, but also
the ller wire feed speed set. The heavier the wire spool and the faster the feed speed, the
greater the need to increase the braking load. Adjust the pressure, secure the locking clip, set
the wire feed speed and check that the braking force is enough to ensure the ller wire does
not spill from the spool on overrun.
NOTE! Too much or unnecessary loads can impact welding quality, load and wear to the wire feed
system.
2.12 Burn back time
FastMig electronics controls the burn back time. When welding stops, an automatic sequence
ensures that the ller wire does not stick to the work piece and that no ball is formed at the
wire tip, ensuring reliable re-ignition. This system works regardless of the wire feed speed set.
2.13 Earth return cable
Preferably the earth return cable and clamp should be connected directly to the welding
material.
Always use a good quality, 70 mmheavy copper cable, and if possible a screw type 600 A
clamp. Ensure that the surface contact to the work piece is clean of metal oxide and or paint.
Make sure the clamp is rmly secured.
11
© Kemppi Oy / 1515

EN
2.14 Shielding gas
NOTE! Handle shielding gas bottle with care. Assess the risks associated with handling and using
compressed gas. Always use a cylinder transport carriage and secure the cylinder safely.
There are many dierent suppliers of quality shielding gases for welding. Please ensure
that you are selecting the correct gas for your application. FastMig products uses welding
programs for Synergic and Pulsed welding. These curves are created and recommend against
a particular shielding gas.
Shielding gas eects welding performance and is a fundamental component to overall weld
quality.
MMT 32
l/min
5
10
15
20
NOTE! Shielding gas ow rate from the welding gun is set according to the application, weld joint,
gas type and gas nozzle shape and size. The ow rate should be measured at the welding gun
nozzle before welding via a rotameter, and normally measure's between 10 – 20 litres per minute
for many welding applications.
2.14.1Installing gas bottle
Always fasten the gas bottle properly in the vertical position, in a special holder against the
wall or on a cylinder carriage. Remember to close gas bottle valve after welding.
Parts of gas ow regulator
5
2
4
7
16
3
1. Gas bottle valve
2. Flow regulation screw
3. Connecting nut
4. Hose tail
5. Hose tail nut
6. Gas bottle pressure gauge
7. Shielding gas ow meter
FastMig MXF 63, 65, 67
12

EN
2.15 Main switch I/O
When you turn the main switch of the FastMig power source into I-position, the pilot lamp
closest to this switch will illuminate, indicating the power source is ready for welding. The
equipment will return to the operation state as before the main switch was turned to the zero
position.
Always start and switch o the machine with the main switch, never use the mains plug as a
switch.
2.16 Operation of cooling unit, FastCool 10
When FastCool 10 is connected to the FastMig power source for the rst time, the cooler
function is normally active. To deselect the cooler function, follow the instructions below
depending on the power source type in use.
FastMig KMS and FastMig M
When leaving the factory, cooling unit status is set 'ON'. If no cooling unit is connected, set the
cooling unit status to 'OFF'. Depending on your panel type follow the instructions described
in the graphic below. Having selected the cooling state required, reset the power source by
switching o at the main on/o switch. Restart the power source and weld.
SF 51/SF 54
WIRE INCH
weld
data
V
A
m/min
4T
SETUP
2T
U
MMA
MIG
MMA
PANEL
SF 51
W001318
DYNAMICS
ARC FORCE
GAS TEST
GAS TEST
ARC FORCE
DYNAMICS
GAS TEST
ARC FORCE
DYNAMICS
MR 200/MR 300
13
© Kemppi Oy / 1515

EN
SF 52W/SF 53W and MS 200/MS 300
> 5 s
SETUP
A + D B
WIRE INCH
GAS TEST
ch
ch clear
MINILOG
SET
ON
MEMORY
PANEL
SAVE
SET
quick
setup
weld
data
ARC FORCE
DYNAMICS
4T
2T
SETUP
POWER
U
SELECT
SYNERGIC
PROGRAM
MMA
WISE
1-MIG
MIG
AV
m/min
mm
SF 52W
W004269
MMA
PEN
remote
CH
C
WIRE INCH
GAS TEST
ch
ch clear
MINILOG
SET
ON
MEMORY
PANEL
SAVE
SET
quick
setup
weld
data
ARC FORCE
DYNAMICS
4T
2T
SETUP
POWER
U
SELECT
SYNERGIC
PROGRAM
MMA
WISE
1-MIG
MIG
AV
m/min
mm
W004269
MMA
PEN
remote
CH
SF 52W
FastMig Pulse
The factory default setting for FastMig Pulse is AUTO. If a cooling unit is not connected and
the operator tries to establish air cooled operation together with an air cooled gun, Err 27
is displayed. To establish air cooled operation, select cooler ‘OFF’. This is done in the ‘System
Cong Menu’ as follows: Press the Menu button on the P65 power source panel. Move the
menu display arrow (via panels left-hand up-down arrow keys) to select‘System Cong Menu’
and then press select button. Choose‘Water Cooling:Auto’and change via control knob to
setting‘Water Cooling:OFF’, then press Back/Exit. Cooler will then be set to the ‘OFF’state for
air cooled operation. Reset power source via on/o switch and continue welding.
When selected, the operation of the cooling unit is automatic, starting when welding
commences. When welding stops the pump will continue operation for approx. 5 min,
so reducing the gun and the cooling liquid to ambient temperature. Read the operation
instructions for the FastCool 10 unit.
2.17 MXF hanging kit
The MXF 63, 65 and 67 wire feed units can be hanged from a special hanging kit available as
an accessory. This allows the wire feed unit to be suspended above the work area.
3. CONTROL PANEL OPERATIONS
MXF wire feeders can be connected to either FastMig Pulse, FastMig KMS or FastMig M power
sources.
PF 63 and PF 65 control panel are compatible with FastMig Pulse.
SF 53W and SF 54 or SF 51 and SF 52W panels enable compatibility with FastMig KMS power
sources.
MR 200, MR 300, MS 200 and MS 300 panels are compatible with FastMig M power sources.
FastMig MXF 63, 65, 67
14

EN
3.1 Connecting and mounting
Fasten the ribbon cable connector from the MXF wire feed unit to the control panel. Attach
the yellow-green earth lead into the fork connector on the PF panel.
MXF 65
1. 2.
1. Place the bottom edge of the panel behind the securing clips on the machine. Remove the
xing pin from the top edge with, for example, a screwdriver. Then gently push the
upper part of the panel into place. Make sure that the cables do not get damaged,
continue gently pushing the upper part of the panel until it clips into place.
2. Finally secure the panel into place with the additional black plastic security clip provided
(MXF 65 only). Ensure that the clip is positioned correctly. You will notice that the clip
does not seat snuggly if its positioned upside down.
MXF 63 + MXF 67
MXF 63 MXF 67
+
15
© Kemppi Oy / 1515

EN
4. WELDING SOFTWARE DELIVERY PROFILE
FastMig Pulse
The following information details welding software options for FastMig Pulse. Welding
software is developing regularly as new function and performance is designed for specic
applications. If you have a specic need beyond your standard equipment prole, check
Kemppi DataStore for new welding software options or discuss with your supplier.
FastMig Pulse is designed to allow customer specied welding software choice. Following
delivery and installation your machine will include welding software specied at the point of
order. The tables below show typical welding programs, but there are more of them available.
Please check availability from your supplier. If the delivery specication is focused to a specic
project and you wish to update the machine in the future, you can select additional welding
software from the Wise & Match software products. Order and load these software products to
your machine with Kemppi DataGun eld program device.
Wise and Match products provide optional welding application solutions. Wise and Match
products menu includes special weld process for (1) root pass and (2) thin plate welding, (3)
auto power regulation and (4) arc length recognition, (5) minilog function, plus additional
base material welding programs and optional panel function.
1. WiseRoot 6265011
2. WiseThin 9991013
3. WisePenetration 9991000
4. WiseFusion 9991014
5. MatchLog 9991017
Kemppi DataStore oers new welding software packages and special enhanced arc
performance solutions.
Customization of FastMig Pulse systems can make welding more ecient. Solutions oered
are designed to meet the needs of wide ranging welding environments.
You can order materials specic welding programs and Wise solutions separately through
Datastore or via your local supplier.
FastMig MXF 63, 65, 67
16

EN
ALUMINIUM PACK
Group Material Wire ø (mm) Shielding gas Process Number
Al AlMg5 1.0 Ar Pulse/Double Pulse A01
Al AlMg5 1.2 Ar Pulse/Double Pulse A02
Al AlMg5 1.6 Ar Pulse/Double Pulse A03
Al AlSi5 1.0 Ar Pulse/Double Pulse A11
Al AlSi5 1.2 Ar Pulse/Double Pulse A12
Al AlSi5 1.6 Ar Pulse/Double Pulse A13
Al AlMg5 1.0 Ar 1-MIG A01
Al AlMg5 1.2 Ar 1-MIG A02
Al AlMg5 1.6 Ar 1-MIG A03
Al AlSi5 1.0 Ar 1-MIG A11
Al AlSi5 1.2 Ar 1-MIG A12
Al AlSi5 1.6 Ar 1-MIG A13
STAINLESS STEEL PACK
Group Material Wire ø (mm) Shielding gas Process Number
Ss CrNiMo 19 12 0.8 Ar+2%CO₂ Pulse/Double Pulse S01
Ss CrNiMo 19 12 0.9 Ar+2%CO₂ Pulse/Double Pulse S02
Ss CrNiMo 19 12 1.0 Ar+2%CO₂ Pulse/Double Pulse S06 Soft
Ss CrNiMo 19 12 1.2 Ar+2%CO₂ Pulse/Double Pulse S04
Ss CrNiMo 19 12 1.0 Ar+He+CO₂ Pulse/Double Pulse S26 Soft
Ss CrNiMo 19 12 1.2 Ar+He+CO₂ Pulse/Double Pulse S24
Ss CrNiMo 19 12 0.8 Ar+2%CO₂ 1-MIG S01
Ss CrNiMo 19 12 0.9 Ar+2%CO₂ 1-MIG S02
Ss CrNiMo 19 12 1.0 Ar+2%CO₂ 1-MIG S03
Ss CrNiMo 19 12 1.2 Ar+2%CO₂ 1-MIG S04
Ss FC-CrNiMo 19 12 1.2 Ar+15–25%CO₂ 1-MIG S84
Ss MC-CrNiMo 19 12 1.2 Ar+2%CO₂ 1-MIG S87
STEEL PACK
Group Material Wire ø (mm) Shielding gas Process Number
Fe Fe 0.8 Ar+15–25%CO₂ 1-MIG F01
Fe Fe 0.9 Ar+15–25%CO₂ 1-MIG F02
Fe Fe 1.0 Ar+15–25%CO₂ 1-MIG F03
Fe Fe 1.2 Ar+15–25%CO₂ 1-MIG F04
Fe Fe 0.8 CO₂ 1-MIG F21
Fe Fe 0.9 CO₂ 1-MIG F22
Fe Fe 1.0 CO₂ 1-MIG F23
Fe Fe 1.2 CO₂ 1-MIG F24
Fe Fe Metal 1.2 Ar+15–25%CO₂ 1-MIG M04
Fe Fe Metal 1.2 CO₂ 1-MIG M24
Fe Fe Rutil 1.2 Ar+15–25%CO₂ 1-MIG R04
Fe Fe Rutil 1.2 CO₂ 1-MIG R14
17
© Kemppi Oy / 1515

EN
WORK PACK
Group Material Wire ø (mm) Shielding gas Process Number
Al AlMg5 1.2 Ar Pulse/Double Pulse A02
Al AlSi5 1.2 Ar Pulse/Double Pulse A12
Fe Fe 1.0 Ar+15–25%CO₂ Pulse/Double Pulse F03
Fe Fe 1.2 Ar+15–25%CO₂ Pulse/Double Pulse F04
Ss CrNiMo 19 12 1.0 Ar+2%CO₂ Pulse/Double Pulse S06
Ss CrNiMo 19 12 1.2 Ar+2%CO₂ Pulse/Double Pulse S04
Al AlMg5 1.2 Ar 1-MIG A02
Al AlSi5 1.2 Ar 1-MIG A12
Fe Fe 0.9 Ar+15–25%CO₂ 1-MIG F02
Fe Fe 1.0 Ar+15–25%CO₂ 1-MIG F03
Fe Fe 1.2 Ar+15–25%CO₂ 1-MIG F04
Fe Fe 0.9 CO₂ 1-MIG F22
Fe Fe 1.0 CO₂ 1-MIG F23
Fe Fe 1.2 CO₂ 1-MIG F24
Fe Fe Metal 1.2 Ar+15–25%CO₂ 1-MIG M04
Fe Fe Metal 1.2 CO₂ 1-MIG M24
Fe Fe Rutil 1.2 Ar+15–25%CO₂ 1-MIG R04
Fe Fe Rutil 1.2 CO₂ 1-MIG R14
Ss CrNiMo 19 12 1.0 Ar+2%CO₂ 1-MIG S03
Ss CrNiMo 19 12 1.2 Ar+2%CO₂ 1-MIG S04
Ss FC-CrNiMo 19 12 1.2 Ar+15–25%CO₂ 1-MIG S84
More welding programs are available by purchasing MatchCurve and MatchCustom products.
You can also order welding program packs together with WiseFusion function.
FastMig MXF 63, 65, 67
18