Kenmore 911.47189 User manual

OWNER'S MANUAL
27" BUILT-IN WALL
OVEN MODEL HO.
CAUTION:
Before using this oven,
read this manual and
follow all its Safety Rules
and Operating
instructions,
oSafety Instructions
° Operation
• Care and Cleaning
oProblem Solving
Sears, Roebuck and Co,, Hoffrnan Estates, IL 60t 79 U,S.A.
229C4O2OP193.1 (SR-10402)

Tableof Contents
27"BUlLFIN WALLOVElY
Oven Safety ............................ 3-4
Features of Your Oven 5
Removal of Packaging Tape .... 5
Oven Control, Clock, Timer ..... 6
Control Display .................. 7
Clock .................................. 8
Kitchen Timer ..................... 8
Tones ................................. 9
F Code ............................. 9
Oven Cooking Tips ......... 10-1I
Baking ................................ 12
Broiling ...................... 13
Setting Special Features 14-!5
Control Panel ......................... 16
Broiler Pan and Grid ............... 16
Standard Oven Interior ........... 16
Oven Light Bulb ........... 16
Oven Racks ............. 17
Oven Door ................. 17
Before Calling for Service ..... 18-19
Temperature Adjustment 20
Warranty ................................. 21
Consumer Service Numbers 22
For your convenience and future reference, please write down
your model and serial numbers in the space provided. They are
located on the front frame behind the oven door,
MODEL NUMBER: SERIAL NUMBER:
2

IMPORTANTSAFETY
INSTRUCTIONS
SAVE THESE mHSTRUCTIOHS
Read all instructions before using this appliance. When using
gas or electrical appliances, basic safety precautions should
be followed, including the following:
|MPORTANT: To insure safety for
yourself, family and home, please
read your Owner's Manual carefully
Keep it handy for reference Pay
close attention to Safety Sections
BE SURE your appliance is in-
stalled and grounded by a qualified
technician
oDO HOT leave children alone or
unattended near an appliance in
use.
o TEACH CHILDREN not to play
with controls or any part of the
appliance, and not to sit, climb or
stand on the door or any parts of
the appliance
° CAUTUON: NEVER STORE
items of interest to children in
cabinets above the appliance,
Children climbing on the appliance
could be seriously injured.
oKEEP THIS book for later use
° NEVER TRY to repair or replace
any part of the apptiance unless
instructions are given in this
manual All other work should be
done by a qualified technician
,,,NEVER USE your appliance for
warming or heating the room
•ALWAYS KEEP combustible wall
coverings, curtains, dishcloths,
towels, potholders, and other linens
a safe distance from the appliance 3
NEVER USE a towel or other
bulky cloth as a potholder and
make sure the potholder is dry.
Moist potholders could cause
steam burns DO NOT let
potholders [ouch hot surfaces
ALWAYS KEEP the appliance
area free from things that will burn
Food, wooden utensils, and grease
buildup could catch fire, Plastic
utensils could melt and canned
foods could explode Your
appliance should never be used as
a storage area.
ALWAYS KEEP your appliance
clear of things that will burn
(gasoline and other flammable
vapors or liquids).
NEVER HEAT unopened food
containers Pressure buildup can
cause the container to burst and
cause injury,
NEVER LEAVE jars or cans of fat
or drippings in your oven_
NEVER TRY to clean a hot
surface. Some cleaners produce
noxious fumes, and wet cloths or
sponges could cause steam burns
NEVER WEAR loose fitting
clothing when using your
appliance
BE SURE the oven is securely
installed in a cabinet that is firmly
attached to the house structure

IMPORTANTSAFETY
iNSTRUCTiONS
•DO NOT touch heating elements,
surfaces near them, or interior oven
surfaces These may be hot enough
to cause burns even though they
are dark in color During and after
use, do not touch or let clothing or
flammable material contact the
elements or hot surfaces until they
have had time to cool. Other
surfaces near the oven vent
openings, oven door, or window
may also be hot enough to cause
burns.
READ AND UNDERSTAND
THiS "NFORMATIOH
NOW!
De sure everyone in your home
knows what to do in case of
fire. Never use water on a
grease fire; it win only spread
the flames.
OVEN FIRE:
Do not try to move the pan!
1. Close the oven door and turn
controls off
2. If fire continues, carefully open the
door, throw baking soda on the
fire, or use a dry chemical, foam,
or halon type extinguisher
oPLACE OVEN RACKS in the
desired position while the oven is
coot If racks must be moved while
oven is hot, do not let potholder
contact the hot oven element
oAFTER DROILaNG, always take
the broiler pan and grid out of the
oven and clean them Leftover
grease in the broiler pan could
catch fire the next time you use
your oven
• ALWAYS USE care when opening
the oven door, Let hot air and steam
escape before moving foods.
• NEVER USE aluminum foil to line
the oven bottom, Improper use of
foil could start a fire, or electrical
shock could result,
°NEVER BLOCK the oven vent
opening
4

OPERATION
FEATURESOFYOUROVEN
Oven
Broil Element
Broiler Pan I
Oven Control Clock Set Pad
Oven Light Switch
Automatic Oven
Bake Element
To remove the adhesive left from packaging tape, use household dishwashing
liquid, mineral oil or cooking oil With a soft cloth rub into the area and allow to
soak Rinse and dry well. Repeat procedure using an appliance polish to insure
no damage is done, This should be done before the oven is turned on
for the first time. The tape cannot be removed once the oven has
heated. Packaging tape may be found in the following areas: door handle,
control panel area, door trim and oven area,
5

OPERATION
OvenControl,Clockand Timer
f
TIMED OVEN KITCIIEN
TEMP HOUR MIN L o_/OFFJ
Your new touch pad oven control will allow you to set oven functions with ease
Below are the different types of functions and a description of each
BAKE -- Cooks foods in the traditional
oven with a temperature range of 170°F
to 550°F.
BROIL -- Cooks foods at 550°F HI
broil or 450° LO broil from the direct
heat of the upper element Broiling
should be done with the door opened to
the broi! stop position
Q Set the amount of time you
want foods to cook or the oven
to clean The oven turns off
automatically at the end of this
time
Set the time of day you want
the oven to turn on. The oven
will turn on automatically at the
time you have set. When
DELAY START TIME is
used with OVEN COOKING
TIME, the oven will also turn
off automatically, at the end of
the cooking time
HOUR MIN
@ vD
TEMP
@
t_'TCHEN
TIMER
G
6
The HOURFr,/ilN UP and
DOWN arrow pads set the
time of day, length of
cooking time, length of
cleaning time, the delayed
start time, and the time set
on the Kitchen Timer
The TEMP UP and DOWN
arrow pads set the
temperature used for
cooking.
The START pad must be
pressed to activate any oven
function
The CLEAR/OFF pad is
used to cancel any oven
function and the end of cycle
tone. It will not cancel
the Clock or Kitchen
Timer.
The KITCHEN TIMER ON/
OFF pad is used to turn the
Kitchen Timer on or off. It will
not control any of the other
oven functions.
The CLOCK pad is used to
set the time of day.
Turns oven light on or off,

OPERATION
Controlmsp/ay
Flashing
indicator To
Alert You To
A Temperature
Or A Time
Oven Temperature Indicator To Let You
indicator Know The Oven Has
/Turned On
j.uj .U
'QO 0CLEAI_
Location For The
Of Day Clock,
Kitchen Timer,
Delay Start Time,
Or Oven Cooking
Oven Function
indicator
The Control Display is an easy
reference for using your oven control.
Below are descriptions of how the
Control Display works.
OVEN TEMPERATURE
iNDICATOR -- This indicator has a
multiple purpose.
oDisplays the temperature
•Displays an error code
"ERR" -If the oven temperature
indicator flashes "ERR", then you
have set an invalid time or
temperature.
° Displays Oven ProbJems -- If
your control flashes "F" and a
number or letter, you have
experienced an oven problem
Please read the section on
F.CODES in your manual.
"ON" iNDICATOR --Wilt light
when the oven turns on
Oven Function
Indicator
SET iNDiCATORS -- The set
indicator will flash in combination with
an oven function or timed function to
let you know you need to set a time or
temperature Example: "SET" and
"BAKE" will Flash to let you know
you need to set the bake temperature
TAMED INDICATOR -- Displays the
time of day, cooking time, delay start
time, or the time set on the Kitchen
Timer
oDisplays areminder cede
"PUSH START"-If the time
indicator flashes the words "PUSH
START", then you need to press
the START pad to activate your
setting,
OVEN FUNCTION iNDiCATORS
Displays which oven function has
been set, and if the function is
delayed
7

OPERATION
Clockand Timer
The clock must be set for the correct
time of day before a delayed oven
function can work properly The time
of day cannot be changed during a
timed oven function, but can be
changed during a bake or broil
function.
HOW TO SET THE CLOCK
HOUR MIN
1. Press the CLOCK pad.
2. Press the HOUR/MIN UP and/or
DOWN arrow pads to set the
time,
3. Press the START pad.
RECALL THE CLOCK
While using your oven for cooking,
press the CLOCK pad if you wish to
check the time of day. The current
time of day will show in the display
POWER FAILURE
If you have experienced a power
failure, the time will flash in the display
and will be incorrect Reset your
clock.
Any oven cooking function that was in
process will need to be reset.
The Kitchen Timer is used to time
cooking processes or other
household activities, It does not
control the oven. it can be set for up
to 9 hours and 59 minutes It will
count down in minutes until the LAST
60 SECONDS is reached, then the
control will beep once When the
countdown reaches ;ZERO, the
control will beep 3 times followed by
one beep every 6 seconds until the
KITCHEN TIMER ON/OFF pad is
pressed. The 6 second beep can be
removed for future cycles if desired.
For directions on removing this
continuous beep, see Tones on the
following page
HOW TO SET THE TIMER
HOUR MIN
t. Press the KITCHEN TnMER
ON/OFF pad,
2. Press the HOUR/MIN UP and/or
DOWN arrow pads to set time_
3. Press the START pad.
4. When the countdown has reached
zero, press the KITCHEN
TIMER ON/OFF pad to turn off
the beep
To cancel the timer during the
countdown, press the KITCHEN
TIMER ON/OFF pad TWICE,
8

OPERATION
OvenControl,Clockand Timer
Your new control has a series of tones
that will sound at different times These
tones may sound while you set the
control for an oven function, or at the
end of the oven function it wili atso alert
you that there may be a problem with
the functions Below are the types of
tones and a brief description of each
TONES WHILE SETTING THE
CONTROL -- When you press a touch
pad you wilt hear a beep This beep will
let you know you have placed enough
pressure on the pad to activate it (The
arrow pads do not beep)
END OF TIMED CYCLE TONE --
At the end of a timed cooking function,
you will hear 3 short beeps followed by
1 beep every 6 seconds. This 6
second beep wilt continue to sound
until the CLEAR/OFF pad is pressed
or you may select the special feature to
cancel this 6 second beep from
sounding at the end of future cycles
TO CANCEL THE 6 SECOND
SLEEP
1. Press and hold the SLAKE and
BROIL pads, at the same time
for 3 seconds, until the display
shows "SF",
2, Press the KITCHEN TIMER ON/
OFF pad The display will show
"CON SLEEP" (continuous beep)
3. Press the KITCHEN TIMER ON/
OFF pad again The display will
show "SLEEP" (beep canceled)
4. Press the START pad to cancel the
6 second beep and leave the
special feature mode
If you would like to return the 6 second
beep, repeat steps above until the
display shows your choice and press
the START pad
ATTEHTnON TONE -- This tone will
sound if you make an error or an
oversight is made while setting an
oven function.
Examples would be:
a. Setting function and not pressing the
START pad,
b. Pressing an additional _unction pad
without first setting a temperature or
time
c. ERR wilt flash if you set an invalid
temperature, Press the CLEARtOFF
pad to clear the control and reset
your oven function
Any of these can be quickly identified
by watching the display.
PREHEAT TONE --When you set an
oven temperature, the oven
automatically starts to heat When the
temperature inside the oven reaches
Ihe temperature you have set, a tone
will sound to let you know the oven is
ready for baking
If you set an oven function and the
control beeps while the display is
flashing "F" and a number or letter
such as "F.4" or "FI," there may be a
problem with the control or oven.
Simply press the CLEAR/OFF pad and
wait about an hour. Try setting the
function again, If the code repeats, write
down the flashing code and call for
service Tell the technician what code
was flashing
9

OPERATION
OvenCookingTips
it is normal to have some odor when
using your oven for the first time To
help eliminate this odor, ventilate
the room by opening awindow
or using avent hood
IMPORTANT: Never cover the oven
bottom or oven rack with aluminum
foil. Improper use can cause poor
heat flow, poor baking results, and
may damage the oven finish To
prevent staining from spillovers, you
may place a piece of aluminum foil or
a cookie sheet below foods which
may spill over
The oven vent is located under the
control panel This area could
become hot during oven use The
vent is important for proper air
circulation, Hever block this
vent, Oven Vent
_1 Location
Opening the door often to check
foods will cause heat loss and poor
baking results
Preheating is bringing the
temperature up to the temperature
you will be using during baking. Let
the oven preheat thoroughly when
recipes call for preheating
in the back of the oven you will notice
a small tube This is a heat sensor
that maintains the temperature of the
oven. Never move or bend this tube.
11t oven
H]_._;8_ Temperature Sensor
The low temperature zone of your
oven (between 170 ° and 200°F) is
available to keep hot cooked foods
warm. However, foods should not be
kept at these temperatures longer
than 2 hours
When using your convenient Delay
Start operation, foods such as dairy
products, fish, poultry, etc., should
never sit more than 1 hour before
cooking. Room temperatures and the
heat from the oven light promote
bacterial growth
Most recipes for baking have been
developed using high-fat products
such as butter or margarine (80% fat
by weight - the federal requirement for
products labeled "margarine")You
will get poor results if cakes, pies,
pastries, cookies or candies are made
with low-fat spreads. Low-fat spreads
continued on next page
10

OPERATION
OvenCookingTips
Margarine (cont,)
contain less fat and more water,, The
high moisture content of these
spreads affects the texture and flavor
of favorite baked recipes ]he lower
the fat content of a spread product,
the more noticeable these differences
become, To ensure best results, use
margarine, butter or stick spreads
containing at least 70% vegetable oil
SHIHY PAHS reflect heat, and are
perfect for cakes and quick breads that
need a light brown crust
GLASS, DARK NON-STICK OR
DARKENED BY AGE BAKEWARE,
absorb heat, and can be used for yeast
breads, pie crust or foods that need a
brown crust The oven temperature,
when using these pans should be
reduced by 25°F
The oven racks are designed with stop
locks, a convenience as wefl as a safety
precaution The guides have a bump to
prevent the racks from tilting when
racks are pulled out of the oven
The Oven Temperature Sensor at the
back of the oven continuously senses
and controls the temperature inside the
oven. To keep a constant set
temperature, the elements will cycle or
turn on and off during cooking
If baking with more than one pan, place
the pans so each has at least 1 to 1 1/2"
of air space around it. Place pans so
one is not directly above the other
FLAT COOKIE SHEETS, without
sides, allow air to circulate all around
the cookies for even browning.
11
Bump In
Rack Guide,
Your oven has four (4) rack positions
The area above the top guide cannot be
used for a rack position
Guide
3-- 3
Always place oven racks in the
proper position while oven is
cool.
o = ..
You may feel that your new oven cooks
differently than the oven it replaced We
recommend that you use your new oven
a few weeks to become more familiar
with it, following the times given in your
recipes as a guide See Do tt Yourself
Temperature Adjustment in the back of
this manual to make the adjustment if
you feel your oven is too hot or too cool
for your cooking preference,

OPERATION
Baking
TEMP
1. Press the BAKE
pad.
2, Press the TEMP UP
and/or DOWN arrow
pads to set the oven
temperature you
prefer to use
3. Press the START
pad
To set the oven to cook for a specific
time and turn off automatically
t. Press the BAKE
pad_
_2.
TEMP
@
HOUR MIN
Press the TEMP UP
and/or DOWN arrow
pads to set the oven
temperature you
prefer to use
Press the OVEN
COOKING TIME
pad
Press the HOURI
MIN UP and/or
DOWN arrow pads
to set the amount of
time you prefer your
foods to cook
5. Press the START
pad
To set the oven to turn on at a later
time of day, cook for a specific
amount of time and turn off
automatically t, Press the BAKE
pad.
2, Press the TEMP UP
and/or DOWN arrow
TEMP pads to set the oven
temperature you
prefer to use.
3, Press the OVEN
COOKING TIME
pad.
HOUR MIN
@@
u
HOUR MIN
@@
Press the HOURI
tVtlN UP and/or
DOWN arrow pads
to set the amount of
time you prefer your
foods to cook
Press the DELAY
START TIME pad
Press the HOURI
MIN UP and/or
DOWN arrow pads
to set the time of day
you prefer the oven
to turn on.
7. Press the START
pad
12

OPERATION
Broiling
Broiling is cooking by direct heat
from the upper element. The oven
door should remain open to the broil
stop position during broiling.
It is not necessary to preheat the
oven when broiling Use the broiler
pan and grid that came with your
oven Both are designed for proper
drainage of fat and liquids
__ f foil is used it must
be molded tightly to
the grid and slits cut
into the foil to match
those of the grid, This
allows fats and liquids to
drain into the broiler pan,
preventing fire and
excessive smoke.
Always remove the pan and
grid from the oven,
Storing or forgetting
asoiled broiler pan
in the oven is apotential
smoke or fire hazard,
The US Department of Agriculture
recommends to cook meat and
poultry thoroughly--meat to at least
an INTERNAL temperature of 160° F
and poultry to at least an INTERNAL
temperature of 180 ° F Cooking to
these temperatures usually protects
against food-borne illness
The closer you place foods to the
broil element, the faster foods brown
on tile outside yet remain red to pink
in the center
Moving meats away from the element
wilt allow the meat to cook to the
center while browning on the outside
Cook side 1 at least 2 minutes longer
than side 2 If your oven is connected
to 208 volts, you may want to use a
higher rack position andlor broil
foods longer
The size, weight, thickness, starting
temperature and your preference of
the doneness of the meat will affect
broiling This chart is based on meats
at refrigerator temperature
FOOD
Steak 1" thick
Ground beef
patties
1" thick
Pork Chops -
1/2" thick
Fish (fillets)
Chicken (pieces',
RACK
POSITION
3
3
3
3
2
"TOTAL
TIME (MIN,)
9-11
16-18
27-29
11-13
45-55
la. Press the BROIL pad. (This
will automatically set Hi
Broil),
lb. While the set indicator is flashing
in the display, press the BROIL
pad again if you prefer to use Lo
Broil. Use Lo Broil to cook foods
such as poultry or thick cuts of
meat thoroughly without over-
browning them
2, Press the START pad
3. When broiling is finished, press
the CLEAR/OFF pad
'13

OPERATION
SettingSpecial Features
Your new touch pad control has
additional features that you may choose
to use After making your selection, if
you want to change that setting, follow
the steps until the display shows your
choice
The control is automatically set to turn
off the oven after 12 hours baking or 3
hours broiling should you forget and
leave the oven on tf you want to
remove this feature:
It Press and hold, at the same
time, the BAKE and BROIIL pads
for 3 seconds, until the display
shows SF
2, Press the DELAY START TIME
pad The display shows 12shdn
(12 hour shut-off),
Press the DELAY START T!IME
pad again. The display will show no
shdn (no shut-off)
3. Press the START pad
Your oven control is set for the
Fahrenheit temperature selections Most
recipes are given using the Fahrenheit
scale You can change this to use the
Celsius selection
lit Press and hold, at the same
time, the BAKE and BROIL pads
for 3 seconds, until the display
shows SF
2. (a) Press the BROIL pad. The
control display will show the
degrees sign and F.
(b) Press the BROIL pad again.
This will change F(Fahrenheit) to C
(Celsius)
3, Press the START pad.
Your control is set to use the 12 hour
clock If you prefer to use the 24 hour
Military Time clock or black out the
display:
1, Press and hold, at the same
time, the BAKE and BROIL pads
for 3 seconds, until the display
shows SF
2. (a) Press the CLOCK pad The
display shows t 2hr. If this is your
choice press the START pad
or
(b) Press the CLOCK pad again.
The display will show 24hr
Example: 5:00 on the 12 hour clock
wilt show 17:00 hours on the military
clock. If this is your choice press the
START pad.
or
(c) Press the CLOCK pad again
The display will show OFF. If this is
your choice press the START pad
The display will not show time. (The
Delay Start Time feature will not
operate)
14

OPERATION
SettingSpecial Features
Your new control has a cook and hold
feature for timed cooking only that will
keep hot cooked foods warm up to 3
hours after the timed cooking is
finished. To activate this feature:
1. Press and hold, at the same
time, the BAKE and BROIL pads
for 3 seconds, until the display
shows SF
2. (a) Press the OVEN COOKItNG
TIME pad. The display will show
HLd OFF
(b) Press the OVEN COOKING
T|IVtE pad again to activate the
feature The display will show HLd
ON
3. Press the START pad
This special feature will allow you to
change the speed; #1 means speed of
change is stow up to#5 which means
speed of change is fast To set the
speed you prefer, follow these steps:
1. Press and hold, at the same
time, the BAKE and BROIL pads
for 3 seconds, until the display
shows SF,
2. Press the UP arrow pad The
display will show the current set
speed.
3. Press the UP arrow to increase the
speed up to the number 5_
or
Press the DOWN arrow pad to
decrease the speed down to the
number 1
4. Press the START pad
15

CAREANDCLEANING
RemovableParts
CLEANING MATERIALS
o Dishwashing detergent
• Warm water
• Soft cloth
Do not use abrasive cleaners,
industrial cleaners or bleach.
CLEANING MATERIALS
• Dishwashing detergent
o Warm water
, Soap-filted scouring pad
• Commercial oven cleaner
TO CLEAN
Allow the pan to soak Sprinkle the
grid with dishwashing detergent and
cover with a damp cloth or paper
towel Rinse and dry well Scour as
needed You may also place both the
pan and grid in the dishwasher
CLEANING MATERIALS
• Oven Cleaner
,, Soap-filled steel wool pad
TO CLEAN
Clean up after each oven use Rinse
thoroughly Do not coat bake or broil
element with oven cleaner When using
oven cleaner read directions on
container carefully,
CAUTION: Disconnect
electrical power to
the oven at the main
circuit breaker or fuse box
before attempting to replace
the oven light bulb. Do not
touch a hot light bulb with
wet hands or awet cloth.
Wait unti! the bulb has
cooled and use adry cloth.
Bulb Live Socket
Collar
Bulb Cover Bail Wire
TO REMOVE THE COVER
1. Disconnect electrical power to the
oven at the main circuit breaker or
fuse box_
2. Hold your hand under cover and
firmly push back the bait wire, until it
clears and releases the bulb cover
REPLACE THE LIGHT BULB
Unscrew the light bulb and replace it
with a 40-watt appliance bulb
TO REPLACE COVER
1. Place the bulb cover into the groove
of the bulb socket
2, Pull the bail wire forward until it
snaps into the indentation on top of
the butb cover
8. Reconnect the electrical power to
the oven
16

CAREANDCLEANING
Removable Parts
CLEANING MATERIALS
o Dishwashing detergent
• Warm water
• Scouring pad or soap-filled steel wool
pad
Bump In
Rack Guide
Raised Back
Of The Rack
TO REMOVE:
t. Pull the racks out to the stop lock
position.
2. Pull up the front of the rack and
slide under the bump of the rack
guide
TO CLEAN:
Clean with warm water and detergent
For hard to remove stains, gently scrub
with a scouring pad or a soap-filled
steel wool pad Rinse well
TO REPLACE:
1. Place the raised back of the rack
onto the rack guides
2. Lift the front of the rack until the
raised back slides under the bump
of the rack guides
3. Slide the rack all the way back
Broil Stop Position
Hinge
TO REMOVE:
1. Open the door to the broil stop
position
2. Grasp the door at each side and lift
up and off the hinges. DO NOT
LIFT DOOR BY THE HANDLE.
_L ..... ,,,,,, ,,,,............. ,,!4_
_AUTiObh When
the door is removed
and the hinge arms
are at the broil stop
position, as a precaution,
cover the hinge arms with
toweling or an empty paper
towel roll. Do not bump or
try to move the hinge arms
while working in the oven
area. They could snap back
causing injury to the hands
or damage the porcelain
finish of the front frame.
TO REPLACE:
t. Make sure the hinge arms are in the
broil stop position
2, Lift the door by the sides
3, Line up the slots at the bottom edge
of the door with the hinge arms
4. Slide the door down onto the hinge
arms as far as it will go
5, Close the door
17

BEFORECALLINGFORSERVICE
To save you time and money, before making a service call check the list below for any
problem you may feel you have with the performance of your oven, If the problem is
something you cannot fix use the Consumer Service Numbers located at the back of this
manual When making any calls have the Model No., Repair Parts list,
Use and Care Manual and the Date of Purchase available.
PROBLEM POSSIBLE CAUSE POSSIBLE SOLUTION
The display of your
control is flashing
"F" followed by a
number or letter,
Oven malfunction
Oven and oven
control will not
work,
No power to oven
Press the CLEAR/OFF
pad Let the oven cool for
1 hour and enter an oven
operation. If code
repeats, call for service
Check the circuit breaker
or fuse, Make sure the
power cord is plugged in
The clock is in the
black-out mode See the "Setting Special
Features" section of this
manual
::: : : : :: : :: ... : : ........................................
Oven temperature Thermostat calibration See the adjustments
seems inaccurate, described following this
section
Oven light will not
work. a, Light switch in off
position,
b. Oven light bulb
burned out
a. Check oven light
switch on the control
panel
b. Check the oven light
bulb
18

BEFORECALLINGFORSERVICE
PROBLEM POSSIBLE CAUSE POSSIBLE SOLUTIOH
Oven a, Dirty oven a. Check for heavy spiltover
smokes, b. improper use of b, Use of foi! not recom-
aluminum foil mended.
e, Broiler pan containing c, Clean pan and grid after
grease left in the oven. each use
Foods do net a. Oven is not preheated a. Be sure to preheat until
bake properly, b. Improper rack or pan
placement.
c. Oven vent blocked or
covered
d. Improper use of foil.
e. Improper temperature
setting for utensil used
f,, Recipe not followed
g. Improper oven control
calibration
h. Oven and oven rack not
level
the tone sounds
b, Maintain uniform air space
around pans and utensils
See oven cooking section
c, Keep vent clear
d, Racks should not be
covered during baking
e, Reduce temperature 25
degrees for glass or dull/
darkened pans
f. Check recipe and
measurement
g, Check the temperature
adjustment following this
section
h, Check the installation
instructions for leveling
Foods do not a, Improper rack position a, Check broil pan
broil properly, placement; see broiling
b. Oven preheated
c, Improper use of foil
d. Oven door closed during
broiling
e. Low voltage (208 Volts)
f, Improper broiling time
section
b. Do not preheat when
broiling
c, Check broiling section
d. Open door to broil stop
e, Use higher rack position
andtor longer cooking
time
f, Check broiling chart in
broiling section
19

"DOIT YOURSELF"
TEMPERATURE
ADJUSTMENT
You may feel that your new oven cooks
differently than the oven it replaced. We
recommend that you use your new oven
a few weeks to become more familiar
with it, following the times given in your
recipes as a guide.
If you think your new oven is too hot
(burning foods) or not hot enough
(foods are undercooked), you can
adjust the temperature yourself. The
appearance and texture of foods is a
better indicator of oven accuracy than
oven thermometers, to check the
temperature setting of your new oven.
These thermometers can vary by 20-40
degrees tn addition, the oven door
must be opened to read these
thermometers Opening the door wil!
change the temperature of the oven
To decide how much to change the
temperature, set the oven temperature
25 degrees higher (if foods are
undercooked) or 25 degrees lower
(if foods are burning) than the
temperature in your recipe, then bake
The results of this "test" should give you
an idea of how much the temperature
should be changed
+
t11. Press and hold down
both the BAKIE and
BROIL pads for 3
seconds, until the
display shows SF'.
TEMP
@
2. Press the BAKE pad
A factory set 2 digit
number will show in the
display, usually 00,
if you think the
oven is not hot
enough,
3a. Press the TEMP UP
arrow pad to
increase 1+1 the
temperature up to
+35°F.
if you think the
oven is too hot,
3b. Press the TEMP
DOWN arrow pad to
decrease (-)the
temperature down to
.35°F.
4, Pressthe START pad.
This increased or decreased
temperature setting will remain in
memory until the above steps are
repeated. A power failure wilt not affect
this setting,
The broil temperature will not be
affected.
2O