KENT Mineral RO Supreme Cooper Manual

250332
Multiple purification by RO+UV+UF+
Copper+ TDS Con trol+Uv in Tank
Supreme Copper
RO + UV + UF + Copper + TDS Control + UV in Tank

KENT Supreme
Copper Mineral RO

1 2
Zero Water Wastage Technology
KENT Supreme Copper MINERAL RO
KENT Supreme Copper
* Tested & certified by TUV-SUD South Asia (P) Ltd. **Zero Water Wastage is based on the standard testing conditions
Do not try to service the purifier on your
own. Instead, call a technician for help.
Avoid sharp bends in the pipe
fittings. Do not bend or block
the reject water pipe.
Maximum distance between the water
source and the purifier should not be
more than 3 meters.
Make sure that the temperature
of the water entering the purifier
is within 10 C - 40 C.
o o
Avoid exposure to direct sunlight
and installation in damp areas.
Do not confine the
purifier in a cabinet.
10 M
Water Source
Water in
Use Genuine KENT Spares for optimum performance.
Rejected Water
Overhead
water tank
TANK
WATER
REJECTED
WATER
OVERHEAD
WATER TANK
PURE
WATER
ACTIVE
COPPER
ACTIVE
COPPER
Rejected
Water

3
4




56



KENT Supreme Copper Mineral RO
KENT Mineral ROSupreme Copper





Slot holes
KENT Supreme Copper Mineral

78
If the supply cord is damaged, it must be replaced by the original part in order to avoid hazard.
This appliance is not intended for use by persons (including children) with reduced physical,sensory or
mental capabilities, or lack of experience and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person responsible for their safety
Children should be supervised to ensure that they do not play with the appliance
 Read the maintenance instructions before opening the appliance.
The appliance must be disconnected from the supply before replacing the UV-C emitter.
Do not operate the UV-C emitter when it is removed from the appliance enclosure.

9
IP