KENT MAXX Owner's manual

Instruction Handbook
for Installation, Operation
and Maintenance.
UV Purifier with Ultra Filtration Process
and Computer Controlled Operation

to KENT

Avoid exposure to direct
sunlight and installation in damp
areas.
10 M
Water Source
Water in
Avoid sharpbends in pipes.
2
Do not try to service the purifier on your own. Instead,
call the service technician for help.
In case the purifier is not to be used for
more than two days, switch off the power
supply and drain the storagetank.
1
Introduction
Salient Features of the KENT MAXX
Items in the Box
Important Instructions
Use Genuine KENT spares for optimum performance.

UV Process
700400
Wavelength(nm)
UVB
280-315
UVC
200-280
X-Rays Ultraviolet Visible Infrared Microwave Radio
UF Process
3
Water Flow Diagram
4
Electrical Circuit Diagram

Installation Instructions
2 Sec. 2 Sec. 2 Sec. 2 Sec.
30 Sec. 30 Sec.
Slot holes
Computer Controlled Operation
6
5

Open the Upper Cover Remove the water tank Clean it under running
tap water and wipe dry
Switch off the power supply.
8
7
White
7L
0.3 kg/cm /10ºC
2
0.1 Micron
11W
Applications
Product Colour
Purification Production Rate
Body Material
Installation
Dimensions (mm)
Filter Cartridge
Inlet Water Pressure/Temp (min)
Weight
UF Membrane Pore Size
UV Lamp Wattage
60L/hr. (depending on inlet water pressure)
ABS Food Grade Plastic
Wall-mounting/Counter-top
390 (L) x 285 (W) x 400 (H)
Sediment, Activated Carbon, UF
6.10 kg
4 kg/cm /40ºC
2
Inlet Water Pressure/Temp (max)
111013Product Code
Product KENT MAXX
24V DC
Voltage Output of SMPS
5000 hrs. of operation
Life of UV Lamp
Water PurifierProduct Generic Name
Input Power Supply Single Phase 140-250 V AC, 50-60 Hz.
Total Power Consumption 36 W
Maintenance
Starting-up the Purifier
Important Safety Instructions
8
IPX1
Warning