Kenwood KAH359GL User manual

instructions
istruzioni
instrucciones
Bedienungsanleitungen
gebruiksaanwijzing
Instrukcja obsługi
KAH359GL
KAH359NS

English 2 - 6
Nederlands 7 - 11
Français 12 - 17
Deutsch 18 - 22
Italiano 23 - 27
Português 28 - 33
Español 34 - 39
Dansk 40 - 44
Svenska 45 - 49
Norsk 50 - 54
Suomi 55 - 59
Türkçe 60 - 64
Česky 65 - 69
Magyar 70 - 74
Polski 75 - 80
Русский 81 - 86
Қазақша 87 - 92
Ελληνικά 93 - 98
Slovenčina 99 - 103
Українська 104 - 109
Eesti 110 - 114
Lietuvių 115 - 119
Latviešu 120 - 124
ÝY
opw - ops

1
2
3
4
5
6
8
7
1
2
3
4
5
6
7
KAH359GL KAH359NS
N

A B
C D
E F

Min-Max
G H
I J
K L

1.6 L Max 30-60
1.2 L Max 60
1 L Max 60
1.2 L Min-Max 30
1 L Min-Max 30
10 (200 g) P 30
100 g Max 30
Max 60
1 L Max 60
300 g Max-2 60
300 g Max + P30
4cm
4-8˚C
4-8˚C
++
250 gx4 500 g
M
MAX (g) (secs)
MAX (g) (secs)

2
General Safety
O Read these instructions carefully and retain for future
reference.
OBefore using for the first time, remove all packaging
and any labels including the plastic blade covers.
Wash the parts: see ‘Cleaning’.
O Do not touch the sharp blades. Keep the blade unit
away from children.
O Do not touch any moving part.
O Always take care when handling the blade unit and
avoid touching the cutting edge of the blades when
cleaning.
O Only use the goblet with the base and blade unit
supplied.
O Never fit the blade unit to the outlet without the
blender goblet fitted.
O Always unplug the machine before putting your hands
or utensils in the goblet.
O Turn the speed control to ‘O’O OFF position and
unplug:
O
before fitting and removing parts and attachments;
O
after use;
O
before cleaning.
O When removing the blender from the power unit:
O
wait until the blades have completely stopped;
O
do not accidentally unscrew the goblet from the
blade unit.
O KAH359GL only:The blender lid must be fitted when
using the stir stick in the goblet.
O KAH359GL only: Only use the stir stick for
processing cold ingredients. DO NOT use when
processing hot liquids.
O SCALD RISK: Hot ingredients must be allowed to cool
to room temperature before placing in the goblet or
before blending.
O Never run the blender empty.
O Only operate the blender with the lid and filler cap in
place.
O Never leave the appliance unattended when it is
operating.
O Misuse of your blender can result in injury.
O Never blend more than the maximum capacity stated
in the recommended usage chart.
O Never run the blender for longer than one minute - it
will overheat. Switch off as soon as you have the right
consistency.
English

3
O Do not put dry ingredients into the blender before
switching on. Cut them into cubes and drop them
through the filler cap while the machine is running.
O Do not use the blender as a storage container. Keep it
empty before and after use.
O Never blend more than 1600 ml (2 pints 16 fl oz) cold
ingredients - less for frothy liquids like milkshakes.
O Smoothie recipes - never blend frozen ingredients
that have formed a solid mass during freezing, break
it up before adding to the blender.
IMPORTANT: HOT BLENDING
INSTRUCTIONS
To minimise the possibility of scalding when blending
hot ingredients keep hands and other exposed skin
away from the lid to prevent possible burns. The
following precautions must be observed:
OCAUTION: Blending very hot ingredients may
result in hot liquid and steam being forced
suddenly past the lid or filler cap.
OWe recommend that hot ingredients are allowed
to cool before blending.
ONEVER exceed 1200ml / 5 cups capacity if
processing hot liquids, such as soups (refer to the
markings on the goblet).
OALWAYS commence blending at a low speed and
gradually increase the speed. NEVER blend hot
liquids by using the Pulse setting.
OLiquids which tend to foam such as milk, should be
limited to a maximum capacity of 1000ml/4 cups.
OTake care when handling the blender as the goblet
and its contents will be very hot.
OTake particular care when removing the lid. The lid
is designed to be a tight fit to prevent leakage. If
necessary protect your hands with a cloth or oven
gloves when handling.
OEnsure the goblet is securely attached to the base
and when removing from the appliance, guide the
base and ensure it is removed together with the
goblet.
OEnsure that the lid and filler cap are securely in
place before every blending operation.
OAlways ensure that the vents in the filler cap are
clear before every blending operation .
OWhen fitting the lid to the goblet always ensure
that the lid and goblet rim are clean and dry to
ensure a good seal and prevent spillage.

4
O This appliance conforms to
EC Regulation 1935/2004
on materials and articles
intended to come into
contact with food.
Use the blender for soups,
drinks, pâtés, mayonnaise,
breadcrumbs, biscuit crumbs,
chopping nuts and crushing ice.
Before using your Kenwood
attachment for the first time
Wash the parts: see ‘Cleaning’.
Key
Filler cap
Lid
Goblet
Sealing ring
Blade unit
Base
Vents
Stir stick (KAH359GL only)
To use your Blender
Refer to Illustrations A–K
1 Fit the sealing ring into
the blade unit - ensuring
the seal is located correctly.
Leaking will occur if the seal
is damaged or not fitted
correctly.
2 Fit the blade unit into the
base .
3 Then screw the goblet onto
the base – ensuring the blade
base is fully tightened.
4 Put your ingredients into the
goblet.
5Fit the lid by pushing down
until secure. (Ensure one of
the protrusions on the lid fits
over the spout on the goblet.)
6 Place the filler cap into the lid
and push down to secure.
7 Remove the high speed outlet
cover.
8 Place the blender over the
outlet, turn clockwise and at
the same time push down
until the unit engages. Then
O Children should be supervised to ensure that they do
not play with the appliance.
O Appliances can be used by persons with reduced
physical, sensory or mental capabilities or lack of
experience and knowledge if they have been given
supervision or instruction concerning use of the
appliance in a safe way and if they understand the
hazards involved.
O Only use the appliance for its intended domestic use.
Kenwood will not accept any liability if the appliance
is subject to improper use, or failure to comply with
these instructions.
Refer to your main Stand Mixer instruction book for
additional safety warnings.
Cleaning N
O
Always switch off, unplug and dismantle before
cleaning. Empty the goblet before unscrewing the base.
O Blade Unit - remove and wash the sealing ring. Brush
the blades clean under the tap. Keep the underneath
of the unit dry. Leave to dry.
O Other parts - refer to cleaning chart N.

5
turn further clockwise until
the attachment locks into
position.
9 Switch to the required speed
(refer to the recommended
usage chart).
10 Once the desired consistency
has been achieved, switch
off and remove the blender
supporting it with both hands.
To use the Stir Stick
(KAH359GL only)
Refer to Illustration L
1 Fit the lid to the goblet and
remove the filler cap. DO
NOT use the stir stick in the
goblet without the lid fitted.
2 Insert the stir stick and move
it round the goblet slowly
whilst the motor is operating.
OUse the stir stick to help move
ingredients around the goblet
and prevent clogging during
processing.
Hints
OTo prevent leaks:
O
wet the sealing ring before
fitting it;
O
make sure the goblet is
locked firmly into the base.
OWhen making mayonnaise, put
all the ingredients, except the
oil, into the blender. Then, with
the machine running, remove
the filler cap and add the oil
slowly and evenly.
OThick mixtures, e.g. pâté,
dips: use low to medium
speed, scraping down when
necessary. If the mixture is
difficult to process, add more
liquid and use the stir stick
if supplied. Alternatively use
the pulse setting to get the
ingredients moving over the
blades.
OWhen crushing ice, process
small amounts at a time and
use the Pulse setting. It is
advisable to hold your hand
on the lid and filler cap during
the operation.
Cleaning
Refer to Illustration N
OAlways switch off, unplug and
dismantle before cleaning.
OEmpty the goblet before
unscrewing the base.
Blade unit
Always take care when
handling the blade unit and
avoid touching the cutting
edge of the blades.
1 Remove and wash the sealing
ring.
2 Brush the blades clean under
the tap. Keep the underneath
of the unit dry.
3 Leave to dry.
Other parts
Wash by hand and then dry
thoroughly or wash in the
dishwasher.