Kenwood KOS-A200 - Car Audio Expansion Module User manual

KOS-A200
EXTERNAL MEDIA CONTROLLER WITH RDS ENCODER
INSTRUCTION MANUAL
CONTRÔLEUR MÉDIA EXTERNE AVEC CODEUR RDS
MODE D’EMPLOI
EXTERNER MEDIA CONTROLLER MIT RDS-KODIERGERÄT
BEDIENUNGSANLEITUNG
EXTERNE MEDIA CONTROLLER MET RDS-ENCODER
GEBRUIKSAANWIJZING
© B64-3422-00/00 (EW)
B64-3422-00EEnglish.Indd1B64-3422-00EEnglish.Indd1 06.4.259:52:12AM06.4.259:52:12AM

2|English
Contents
Safety precautions 3
Notes 4
About USB device 5
About AAC, MP3 and WMA 6
General features 8
Loading and Replacing the battery
Power
Selecting the Source
Switching Display
USB device/Audio file/External disc
control features 10
Playing USB device
Playing External Disc
Fast Forwarding and Reversing
Track/File Search
Disc Search/Folder Search
Direct Track/File Search
Direct Disc Search
Track/File Repeat
Disc/Folder Repeat
Scan Play
Random Play
Magazine Random Play
All Random Play
Folder Select
Text/Title Scroll
DAB tuner control features 14
About DAB Tuner control
Service Preset Memory
Recalling a Preset Service
Program Type (PTY) Function
Program Type preset
DAB Reception
Primary/Secondary Switching
Text Scroll
Menu system 17
Menu System
Transmission Frequency
Modulation Level
Data Transmission Speed
Touch Sensor Tone
Touch Sensor Tone Volume
Text Scroll
Built-in Auxiliary Input Setting
Auxiliary Input Display Setting
Firmware version display
Search Mode Setting
Auto Memory Entry
Switching Seek Mode
PTY Watch Select Mode
Language Filter Search Mode
Accessories/ Installation Procedure 22
Installation 23
Connecting Wires to Terminals 24
Troubleshooting Guide 26
Specifications 28
B64-3422-00EEnglish.Indd2B64-3422-00EEnglish.Indd2 06.4.259:52:12AM06.4.259:52:12AM

English |3
Safety precautions
About CD players/disc changers
connected to this unit
Kenwood disc changers/ CD players released in
1998 or later can be connected to this unit.
Refer to the catalog or consult your Kenwood
dealer for connectable models of disc changers/
CD players.
Note that any Kenwood disc changers/ CD players
released in 1997 or earlier and disc changers made
by other makers cannot be connected to this unit.
Connecting unsupported disc changers/CD players
to this unit may result in damage.
Set the "O-N" Switch to the "N" position for the
applicable Kenwood disc changers/ CD players.
The functions you can use and the information
that can be displayed may differ depending on the
models being connected.
• You can damage both your unit and the CD changer if
you connect them incorrectly.
2WARNING
To prevent injury or fire, take the
following precautions:
• To prevent a short circuit, never put or leave any
metallic objects (such as coins or metal tools)
inside the unit.
• Mounting and wiring this product requires
skills and experience. For safety’s sake, leave the
mounting and wiring work to professionals.
2CAUTION
To prevent damage to the machine, take
the following precautions:
• Make sure to ground the unit to a negative 12V
DC power supply.
• Do not install the unit in a spot exposed to direct
sunlight or excessive heat or humidity. Also avoid
places with too much dust or the possibility of
water splashing.
• When replacing a fuse, only use a new fuse with
the prescribed rating. Using a fuse with the wrong
rating may cause your unit to malfunction.
• Do not use your own screws. Use only the screws
provided. If you use the wrong screws, you could
damage the unit.
The "AAC" logo is trademark of Dolby
Laboratories.
B64-3422-00EEnglish.Indd3B64-3422-00EEnglish.Indd3 06.4.259:52:13AM06.4.259:52:13AM

4|English
This Product is not installed by the manufacturer
of a vehicle on the production line, nor by the
professional importer of a vehicle into an EU
Member State.
Information on Disposal of Old Electrical
and Electronic Equipment (applicable for
EU countries that have adopted separate
waste collection systems)
Products with the symbol (crossed-out
wheeled bin) cannot be disposed as
household waste.
Old electrical and electronic equipment
should be recycled at a facility capable
of handling these items and their
waste byproducts. Contact your local
authority for details in locating a
recycle facility nearest to you. Proper
recycling and waste disposal will help
conserve resources whilst preventing
detrimental effects on our health and the
environment.
• No USB device comes with this unit. You need to
purchase a commercially available USB device. For
the types of available USB devices, refer to <About
USB device> (page 5).
• If you experience problems during installation,
consult your Kenwood dealer.
• When you purchase optional accessories, check
with your Kenwood dealer to make sure that they
work with your model and in your area.
• The characters which can be displayed by this
unit are A-Z 0-9 @ " ‘ ` % & * + – = , . / \ < > [ ] ( ) : ;
^ - { } | ~ ! ? # .
• The illustrations of the display and the panel
appearing in this manual are examples used to
explain more clearly how the controls are used.
Therefore, what appears on the display in the
illustrations may differ from what appears on the
display on the actual equipment, and some of the
illustrations on the display may be inapplicable.
• The reception of tuner may be reduced a little if
the KOS-A200 is used.
• If your car stereo does not have muting, there
may be some noise before power switch of
control unit is ON and OFF. If this happens, turn
down the volume of the car stereo.
How to reset your unit
• If the unit fails to operate properly, take off power
supply cord plug from the unit. After waiting
several seconds, connect power supply cord plug
again. The unit returns to factory settings.
Cleaning the Unit
If the faceplate of this unit is stained, wipe it with a
dry soft cloth such as a silicon cloth.
Notes
B64-3422-00EEnglish.Indd4B64-3422-00EEnglish.Indd4 06.4.259:52:13AM06.4.259:52:13AM

English |5
About USB device
Notes on Use of the USB device
This unit can play audio files stored in the flash
memory and digital audio player that have a USB
port (these devices are referred to as USB devices in
this document).
The following restrictions are placed on the types
and usage of available USB devices:
Available USB devices
• USB devices belonging to the USB mass storage
class.
• USB devices whose maximum current
consumption is 500 mA or less.
For the supported formats and USB device types,
refer to http://www.kenwood.com/usb/.
• USB Mass Storage Class:
USB devices that the PC can recognize as an external
storage without using any special driver or application
software.
• Contact the sales agent as to whether your USB device
conforms to the USB mass storage class specs.
• Using an unsupported USB device can result in abnormal
playback or display of the audio file.
Even if you use the USB device conforming to the above
specs, audio files cannot be played normally depending
on the type or condition of the USB device.
About the Connection of the USB device
• When connecting the USB drive, usage of the
supplied USB cable is recommended.
Normal playback is not guaranteed when a cable
other than the USB compatible cable is used.
Connecting a cable whose total length is longer
than 5 m can result in abnormal playback.
• Do not directly connect the USB device to the USB
connector on the unit. Connect it using a cable.
• You cannot connect a USB device via a USB hub.
• Install the USB device in the place where it will not
prevent you from driving your vehicle properly.
• Do not leave the USB device in the vehicle for a long
time. It can deform or damage due to direct sunlight,
high temperature, etc.
• Take backups of the audio files used with this unit.
The files can be erased depending on the operating
conditions of the USB device.
We shall have no compensation for any damage arising
out of erasure of the stored data.
• Leave the cap on when not using an USB device.
B64-3422-00EEnglish.Indd5B64-3422-00EEnglish.Indd5 06.4.259:52:13AM06.4.259:52:13AM

6|English
About AAC, MP3 and WMA
The playable AAC/MP3/WMA file (hereafter called
Audio file) and the media format has the following
limitation. The Audio file, which is not conforming
to the specification, may not play normally, or the
file and folder names may not display correctly.
Playable Audio file
• AAC, MP3, WMA
• Attach the correct extension for the Audio file (AAC:
".M4A", MP3: ".MP3", WMA: ".WMA")
• Do not attach the extensions to files other than the
Audio file. If the extension is attached, the file, which is
not the Audio file, will play and outputs a loud noise,
causing damage to the speaker.
• The files with copy protection cannot be played.
• Audio files cannot be played depending on the encoding
software setting, USB device type, and/or recording
conditions.
• The unit may not be compatible with upgrade
of compression format standard and additional
specifications.
• For details on the formats used for USB devices and
restrictions, refer to http://www.kenwood.com/usb/.
Playable AAC file
• ".m4a" file encoded by AAC-LC format.
Refer to http://www.kenwood.mediamanager.jp
for the details.
Playable MP3 file
• MPEG 1/2 Audio Layer 3 file
• Transfer bit rate: 8-320 kbps
• Sampling frequency: 16, 22.05, 24, 32, 44.1, 48 kHz
Playable WMA file
• The file in accordance with Windows Media Audio
(Except for the file for Windows Media Player 9 or
after which applies the new functions)
• Transfer bit rate: 48-192 kbps
• Sampling frequency: 32, 44.1, 48 kHz
Playable Storage media
• USB device
• For details on the available USB devices, refer to <About
USB device> (page 5).
Playable file format of USB device
• For the formats supported by USB devices, refer to
http://www.kenwood.com/usb/.
The maximum number of characters for
display
File/Folder name: 128 characters
MP3 ID3 Tag/ WMA Contents property:
30 characters
AAC song information: 60 characters
• File/Folder name is the number of the characters
including the extensions.
• This unit can display the following versions of MP3 ID3
tag: version 1.0/ 1.1/ 2.3
• AAC ID3 Tag cannot be displayed.
Limitation of structure for the file and the
folder
• Maximum number of directory levels: 8
• Maximum number of folders: 100
• Maximum number of files per folder: 4096
About partition of the USB device
• While using the USB device, virtual folders are
created to control the partition in the USB device.
These folders appear in the first level (root)
directory as "#:". "#" is an alphabet to identify each
partition.
• Even when the USB device does not have
partition, "A:" folder is created, and audio files are
controlled inside this folder.
B64-3422-00EEnglish.Indd6B64-3422-00EEnglish.Indd6 06.4.259:52:14AM06.4.259:52:14AM

English |7
Playing order of the Audio file
• Audio files are played in the order the files are
written. You can specify the order of playback by
numbering files in a folder and writing them by
folder. (USB device)
Example
CD
¡!
2
(1)
^: Folder
¡: Audio file
3
¡$
4
¡"
¡#
¡P
5¡%
Folder
Audio file
• Playing order
Playing order after ¡! play.
➡¡", ¡#, ¡$, ¡%...
• File search
Forward file search during ¡" play.
Press the [¢] button ➡¡#
• Folder search
Forward folder search during ¡" play.
Press the [5] button ➡4, 5...
• Folder select
When the selection is set to directory 4, and you
want to skip to the folder 2at the same level.
Press the [4] button ➡2
When the selection is set to directory 3, moves
the level up by folder select.
Press the [∞] button ➡2
B64-3422-00EEnglish.Indd7B64-3422-00EEnglish.Indd7 06.4.259:52:14AM06.4.259:52:14AM

8|English
General features
Loading and Replacing the battery
Use two "AA"/ "R6"-size batteries.
Slide the cover while pressing downwards to
remove it as illustrated.
Insert the batteries with the + and – poles aligned
properly, following the illustration inside the case.
2WARNING
• Store unused batteries out of the reach of children.
Contact a doctor immediately if the battery is
accidentally swallowed.
• Do not set the remote control in hot places such as
on the dashboard.
Power
Sets the car radio FM station to 88.3 MHz and
select the PS (program service name) mode for
display.
You can change the transmission frequency. Refer
to <Transmission Frequency> (page 18).
Turning ON the Power
Slide the [POWER] switch to ON.
Turning OFF the Power
Slide the [POWER] switch to OFF.
SRC
4/¢
MENU
POWER
ONOFF
B64-3422-00EEnglish.Indd8B64-3422-00EEnglish.Indd8 06.4.259:52:14AM06.4.259:52:14AM

English |9
Selecting the Source
Press the [SRC] button.
Source required Display
Standby "STANDBY"
DAB (Optional accessory) "DAB"
USB device "USB"
External disc (Optional accessory) "CD CH"
Auxiliary input 1* "AUX1"
Auxiliary input 2* "AUX2"
• * You can select this source when <Built-in Auxiliary
Input Setting> (page 19) is set to "ON".
Switching Display
Changing the information displayed.
1Select the source
Press the [SRC] button.
2Enter Menu mode
Press the [MENU] button.
"MENU" is displayed.
3Enter Switching Display mode
Press the [5] or [∞] button.
"DISP SEL" is displayed.
4Select the Display item
Press the [4] or [¢] button.
In External disc source
Information Display
Disc title (In External disc source) "D-TITLE"*
Track title (In External disc source) "T-TITLE"*
Disc number & Track number "NUMBER"
In Audio file source
Information Display
Song title & Artist name "TITLE"*
Album name & Artist name "ALBUM"*
Folder name "FOLDER"
File name "FILE"
Folder number & File number "NUMBER"
In DAB source
Information Display
Service label "SERV LBL"*
Dynamic label "DYNAMIC"*¹
PTY label "PTY"*¹
Component label "COMP"*
Audio quality "QUALITY"*¹
Ensemble label "ENSEMBLE"*
Region label "REGION"*
Received Frequency "FREQ"
5Exit Switching Display mode
Press the [MENU] button.
• * If the contents of the information cannot be
displayed, Disc/Track number, Folder/File number or
Frequency is displayed.
• *¹ If the contents of the information cannot be
displayed, "NO TEXT"/"NONE"/"OBSCURE" is
displayed.
• Track number at Audio file displays the last 3 digits
when it exceeds 1000 songs.
B64-3422-00EEnglish.Indd9B64-3422-00EEnglish.Indd9 06.4.259:52:15AM06.4.259:52:15AM

10 |English
USB device/Audio file/External disc control features
Playing USB device
Playing USB device
1Select a source other than the USB device
Press the [SRC] button.
2Connect the USB device.
3Select USB source
Press the [SRC] button.
Select the "USB" display.
• Refer to <About AAC, MP3 and WMA> (page 6) for the
Audio file you can play.
• For the types of available USB devices and how to
connect USB devices, refer to <About USB device>
(page 5).
• After you stopped playing a file contained in the USB
device, you can restart playing the file from the point
where you stopped its playback.
Even after removing the USB device, you can restart
playing the file from the point where you stopped
its playback as long as the files contained in the USB
device are all the same.
• Be sure to insert the USB device connector as far as it
will go.
Pause and play
Press the [38] button.
Each time you press the button, the audio pauses
or plays.
Removing the USB device
1Select a source other than the USB device
Press the [SRC] button.
2Remove the USB device.
• Removing the USB device with it selected as a source
can damage the data stored in the USB device.
• You can remove the USB device safely with the unit
power turned off.
SRC
F.SEL
SCRL
RDM
REP
[3]
4/¢
SCAN
A.RDM
38
[0] — [9]
F.REP
B64-3422-00EEnglish.Indd10B64-3422-00EEnglish.Indd10 06.4.259:52:15AM06.4.259:52:15AM

English |11
Playing External Disc
Playing discs set in the optional accessory disc
player connected to this unit.
Press the [SRC] button.
Select the display for the disc player you want.
Display examples:
Display Disc player
"CD CH" CD changer
"MD CH" MD changer
Pause and play
Press the [38] button.
Each time you press the button, the audio pauses
or plays.
• The functions that can be used and the information
that can be displayed will differ depending on the
external disc players being connected.
Fast Forwarding and Reversing
Fast Forwarding
Hold down the [¢] button.
Release to resume the playback.
Reversing
Hold down the [4] button.
Release to resume the playback.
• You can control this function when <Search Mode
Setting> (page 19) is set to "MANUAL".
• There is no sound while the Audio file is being
searched.
• You cannot fast Forwarding and Reversing depending
on AAC file format.
Track/File Search
Searching for a song on the disc or in the Audio
file folder.
Press the [4] or [¢] button.
• You can control this function when <Search Mode
Setting> (page 19) is set to "TRACK".
Function of disc changer/ Audio file
Disc Search/Folder Search
Selecting the disc set in the Disc changer or the
folder recorded on the Audio file media.
Press the [5] or [∞] button.
Direct Track/File Search
Doing Track/File Search by entering the track/file
number.
1Enter the track/file number
Press the number buttons.
•You can select Direct File Search up to 999.
2Do Track/File Search
Press the [4] or [¢] button.
Cancelling Direct Track/File Search
Press the [38] button.
Function of disc changer
Direct Disc Search
Doing Disc Search by entering the disc number.
1Enter the disc number
Press the number buttons.
2Do Disc Search
Press the [5] or [∞] button.
Cancelling Direct Disc Search
Press the [38] button.
• Input "0" to select disc 10.
B64-3422-00EEnglish.Indd11B64-3422-00EEnglish.Indd11 06.4.259:52:15AM06.4.259:52:15AM

12 |English
USB device/Audio file/External disc control features
Disc/Folder Repeat
Replaying the song, disc in the Disc changer or
Audio file folder you are listening to.
Press the [F.REP] button.
"DREP"/"FREP" is displayed, when <Switching
Display> (page 9) is select to "NUMBER".
Each time you press the button, the Repeat Play
alternates between the modes shown in the
tables below.
In External disc source
Repeat play Display
Disc Repeat (In Disc Changer) "DISC REP"
OFF "REP OFF"
In Audio file source
Repeat play Display
Folder Repeat "FOLD REP"
OFF "REP OFF"
Scan Play
Playing the first part of each song on the disc
or Audio file folder you are listening to and
searching for the song you want to hear.
1Start Scan Play
Press the [SCAN] button.
"SCN"/"TRAC SCN"/"FILE SCN"/"SCAN" is
displayed.
2Release it when the song you want to listen
to is played
Press the [SCAN] button.
Random Play
Play all the songs on the disc or Audio file folder
in random order.
Press the [RDM] button.
"RDM" is displayed, when <Switching Display>
(page 9) is select to "NUMBER".
Each time you press the button, Random Play
turns ON or OFF.
When the Random mode is ON, "DISC RDM"/
"FOLD RDM" is displayed.
• When you press the [¢] button, the next random
song starts.
Track/File Repeat
Replaying the track/file you are listening to.
Press the [REP] button.
"REP" is displayed, when <Switching Display>
(page 9) is select to "NUMBER".
Each time you press the button, the Repeat Play
alternates between the modes shown in the
tables below.
In External disc source
Repeat play Display
Track Repeat "TRAC REP"
OFF "REP OFF"
In Audio file source
Repeat play Display
File Repeat "FILE REP"
OFF "REP OFF"
B64-3422-00EEnglish.Indd12B64-3422-00EEnglish.Indd12 06.4.259:52:16AM06.4.259:52:16AM

English |13
Function of disc changer
Magazine Random Play
Play the songs on all the discs in the disc changer
in random order.
Press the [A.RDM] button.
"MRDM" is displayed, when <Switching Display>
(page 9) is select to "NUMBER".
Each time you press the button, the Magazine
Random Play turns ON or OFF.
When the Magazine Random mode is ON,
"MGZN RDM" is displayed.
• When you press the [¢] button, the next random
song starts.
Function of Audio file
All Random Play
Playing randomly from all of the Audio files
recorded in the media.
Press the [A.RDM] button.
"ARDM" is displayed, when <Switching Display>
(page 9) is select to "NUMBER".
When the random mode is ON, "ALL RDM" is
displayed.
Cancelling the All Random Play
Press the [A.RDM] button.
• When you press the [¢] button, the next random
song starts.
Text/Title Scroll
Scrolling the displayed CD text, Audio file text, or
MD title.
Press the [SCRL] button.
Function of Audio file
Folder Select
Quickly selecting the folder you want to hear.
1Enter Folder Select mode
Press the [F.SEL] button.
"F-SELECT" is displayed.
During Select mode the folder information is
displayed as shown below.
Folder name display
Displays the current folder name.
2Select the folder level
Press the [5] or [∞] button.
With the [5] button you move 1 level down and
with the [∞] button 1 level up.
Selecting a folder in the same level
Press the [4] or [¢] button.
With the [4] button you move to the previous
folder, and with the [¢] button to the next
folder.
Returning to the top level
Press the [3] button.
Scrolling the folder name display
Press the [SCRL] button.
3Decide the folder to play
Press the [38] button.
The Folder Select mode releases, and the Audio
file in the folder being displayed plays.
Cancelling the Folder Select mode
Press the [F.SEL] button.
B64-3422-00EEnglish.Indd13B64-3422-00EEnglish.Indd13 06.4.259:52:16AM06.4.259:52:16AM

14 |English
DAB tuner control features
About DAB Tuner control
Refer to Agroup on the Instruction manual of DAB
Tuner KTC-9090DAB (optional accessory) for the
control method of DAB Tuner function.
However, the following control methods of the
function for this unit may be differed from the
Instruction manual; therefore, refer to the following
supplemental instruction.
Service Preset Memory
Putting the services in the memory.
1Select the preset band
Press the [5] button.
Each time you press the button, the preset band
switches between BAND1, BAND2, and BAND3.
2Select the service to put in the memory
Press the [4] or [¢] button.
3Enter memory mode
Press the [MEMORY] button.
"PRESET" is displayed.
4Select a preset number
Press the desired [1] — [6] button.
5Put the service in the memory
Press the [OK] button.
"MEMORY" is displayed.
On each band, 1 service can be put in the
memory on each [1] — [6] button.
Recalling a Preset Service
Recalling the services in the memory.
1Select the preset band
Press the [5] button.
2Recall the service
Press the desired [1] — [6] button.
MEMORY
SCRL
4/¢
[0] — [9]
SCAN
OK
38
B64-3422-00EEnglish.Indd14B64-3422-00EEnglish.Indd14 06.4.259:52:16AM06.4.259:52:16AM

English |15
Program Type (PTY) Function
This function permits desired program types from
within the received Ensemble to be searched and
monitored.
1Enter PTY Mode
Press the [38] button.
• This function cannot be used during the interruption
of the announcement/ PTY Watch.
2Select the program type
Press the [5] or [∞] button.
Each time you press the button, the program
type changes.
Refer to the instruction manual of DAB tuner for
<Program Type Display>.
3 Search a service of the selected program
type
Press the [4] or [¢] button.
When you want to search for other service, press
[4] or [¢] button again.
• If the selected program type is not found, the
message ("NO PTY", etc.) is displayed.
When searching for a service of another program type,
repeat procedures 2 and 3.
Switching to Another Service:
Repeat procedure 3.
Another service of the same program type will
be searched.
Cancelling Search In the Middle:
Press the [38] button.
Searching by program type and language
1Press the button while in program type
selection mode
Press the [SCAN] button.
2Selecting a language
Press the [5] or [∞] button.
As for the available languages, refer to the
instruction manual of DAB tuner for <Language
Filter Search Mode>.
3Searching by the selected program type and
language
Press the [4] or [¢] button.
4Exiting: Press the [SCAN] button.
Languages to be displayed
Select English, French, German, Dutch, Spanish,
Portuguese, Norwegian or Swedish in <Language
Filter Search Mode> (page 21) to display in the
selected language.
Program Type preset
Putting the Program Type in the Preset memory
and quick recall.
Presetting the Program Type
1Select the Program Type to preset
Refer to <Program Type (PTY) Function> (page
15).
2Receive the Program Type to be preset
Press the [MEMORY] button.
"PRESET" is displayed.
3Select a preset number
Press the desired [1] — [6] button.
4Preset the Program Type
Press the [OK] button.
Recalling the preset Program Type
1Enter PTY mode
Refer to <Program Type (PTY) Function> (page
15).
2Select a preset number
Press the desired [1] — [6] button.
B64-3422-00EEnglish.Indd15B64-3422-00EEnglish.Indd15 06.4.259:52:17AM06.4.259:52:17AM

16 |English
DAB tuner control features
Primary/Secondary Switching
The Primary and Secondary can be switched with
services that are composed of more than one
service components.


Ensemble
Service 1
Service 2
Primary "PRI"
Secondary "SEC"
…
Press the [∞]button.
• The Primary is selected automatically when the service
is switched or the unit is turned off.
• The Primary/ Secondary switching is not available
when the service has only one service component or
its Secondaries consist of data services.
Text Scroll
Scrolls the displayed service label and other
items.
Press the [SCRL] button.
DAB Reception
In DAB, select Ensemble and then choose Service
(Audio programme).



Switching the ensemble channel
(L band)(band III)
Ensemble
Service 1
Service 2
Service 3
Switching service
1Select the ensemble or service
Press the [SCAN] button.
"FREQ"/"SERVICE" is displayed.
Display Setting
"FREQ" Selecting the ensemble mode.
"SERVICE" Selecting the service mode.
2Switching the ensemble or service
Press the [4] or [¢] button.
• Switching the Service causes a break-off of the sound
for about one second.
• There is no switching to data service.
B64-3422-00EEnglish.Indd16B64-3422-00EEnglish.Indd16 06.4.259:52:17AM06.4.259:52:17AM

English |17
Menu system
Menu System
Setting beep sound during operation, etc.
functions.
The Menu system basic operation method is
explained here. The reference for the Menu items
and their setting content is after this operation
explanation.
1Enter Menu mode
Press the [MENU] button.
"MENU" is displayed.
2Select the menu item
Press the [5] or [∞] button.
Example: When you want to set the beep sound,
select the "BEEP" display.
3Set the menu item
Press the [4] or [¢] button.
Example: When "BEEP" is selected, each time the
button is pressed it switches "BEEP ON"
or "BEEP OFF". Select 1 of them as the
setting.
You can continue by returning to step 2 and
setting other items.
4Exit Menu mode
Press the [MENU] button.
• When other items those applicable to the basic
operation method above are displayed, their setting
content chart is entered. (Normally the setting listed at
the top of the chart is the original setting.)
SRC
4/¢
MENU
OK
B64-3422-00EEnglish.Indd17B64-3422-00EEnglish.Indd17 06.4.259:52:18AM06.4.259:52:18AM

18 |English
Menu system
In Standby mode
Transmission Frequency
Setting the transmission frequency.
1Select Transmission Frequency setting mode
Press the [5] or [∞] button.
Select the "FREQ" display.
2Set the Transmission Frequency
Press the [4] or [¢] button.
Display Setting
"FREQ 87.9" 87.9 MHz
"FREQ 88.1" 88.1 MHz
"FREQ 88.3" 88.3 MHz (Original setting)
"FREQ 88.5" 88.5 MHz
"FREQ 88.7" 88.7 MHz
"FREQ 88.9" 88.9 MHz
"FREQ 89.1" 89.1 MHz
"FREQ 89.3" 89.3 MHz
"FREQ 89.5" 89.5 MHz
"FREQ 89.7" 89.7 MHz
"FREQ 89.9" 89.9 MHz
3Enter Transmission Frequency
Press the [OK] button.
• If there is a strong broadcast station signal near the
current frequency, radio interference may occur. If it
occurs, change the frequency.
Modulation Level
Setting the modulation level of transmitter.
Display and Setting
"MOD LV1"
"MOD LV2" (Original setting)
"MOD LV3"
• When you play sources, if the volume is low
compared with that for FM increase the modulation
level. If the volume is high and there is distortion,
decrease the modulation level.
In Standby mode
Touch Sensor Tone
Setting the operation check sound (beep sound)
ON/OFF.
Display Setting
"BEEP ON" Beep is heard.
"BEEP OFF" Beep canceled.
Touch Sensor Tone Volume
Adjust the operation check sound level (beep
sound).
Display and Setting
"BEEP LV1"
"BEEP LV2"
"BEEP LV3" (Original setting)
"BEEP LV4"
"BEEP LV5"
• The touch sensor tone volume can be set for each
source.
• AUX1 and AUX2 cannot be set a different value.
Data Transmission Speed
Setting the data transmission speed of RDS.
Display and Setting
"SCL-SPD 1"
"SCL-SPD 2"
"SCL-SPD 3" (Original setting)
"SCL-SPD 4"
"SCL-SPD 5"
• Sets the value that a text is displayed correctly by car
stereo.
B64-3422-00EEnglish.Indd18B64-3422-00EEnglish.Indd18 06.4.259:52:18AM06.4.259:52:18AM

English |19
In Standby mode
Built-in Auxiliary Input Setting
Set the Built-in Auxiliary Input function.
Display Setting
"AUX1 OFF"/"AUX2
OFF"
When selecting the source there’s no Auxiliary
Input.
"AUX1 ON"/"AUX2
ON"
When selecting the source there’s Auxiliary
Input.
Text Scroll
Setting the displayed text scroll.
Display Setting
"SCL MANU" Doesn’t scroll.
"SCL AUTO" Scrolls when the display changes.
• The text scrolled is listed below.
- CD text
- Folder name/ File name/ Song title/ Artist name/
Album name
- MD title
- Text for the DAB source including Channel name,
etc.
USB mode
Firmware version display
Displaying the firmware version with the unit.
1Select the firmware version display mode
Press the [5] or [∞] button.
Select the "F/W VER" display.
2Display the firmware version
Press the [4] or [¢] button.
In AUX1/AUX2 mode
Auxiliary Input Display Setting
Selecting the display when alternating to
Auxiliary input source.
1Select Auxiliary input display setting mode
Press the [5] or [∞] button.
Select the "NAME SET" display.
2Select the Auxiliary input display
Press the [4] or [¢] button.
Each time you press the button, the display
alternates as listed below.
• "AUX1"/"AUX2"
• "DVD"
• "PORTABLE"
• "GAME"
• "VIDEO"
• "TV"
In USB/ Audio file/ External disc mode
Search Mode Setting
Sets the search mode function for USB device,
Audio file and External disc.
1Select the Search mode
Press the [5] or [∞] button.
Select the "SRCH SEL" display.
2Set the Search mode
Press the [4] or [¢] button.
Display Operation
"TRACK" Sets Track/File Search function.
"MANUAL" Sets Fast Forwarding/Reversing Search
function.
3Exit Auxiliary input display setting mode
Press the [MENU] button.
B64-3422-00EEnglish.Indd19B64-3422-00EEnglish.Indd19 06.4.259:52:18AM06.4.259:52:18AM

20 |English
Menu system
In DAB mode
Auto Memory Entry
Putting stations with good reception in the
memory automatically.
1Select the Auto memory Entry mode
Press the [5] or [∞] button.
Select the "A-MEMORY" display.
2Enter Auto memory Entry mode
Press the [OK] button.
When 6 stations that can be received are put in
the memory Auto Memory Entry closes.
In DAB mode
Switching Seek Mode
Sets the seeking mode.
1Select the Seek mode
Press the [5] or [∞] button.
Select the "SEEK SEL" display.
2Set the Seek mode
Press the [4] or [¢] button.
Each time you press the button, the Seek mode
alternates between the operations shown in the
table below.
Tuning mode Display Operation
Auto Ensemble
Seek
"AUTO1" An Ensemble in good receiving
condition can be selected and received.
Preset Service
Recall
"AUTO2" Services registered can be recalled in
the order of the Pre-set number.
Manual "MANUAL" Channels are switched one after
another.
In DAB mode
PTY Watch Select Mode
After registering a desired programme type,
when the programme in the registered type starts
in the Ensemble being received, the Service is
automatically switched.
1Select the PTY Watch Select mode
Press the [5] or [∞] button.
Select the "PTY WATCH" display.
2Enter PTY Watch Select mode
Press the [OK] button.
3Set the PTY Watch Select mode
Press the [5] or [∞] button.
As for available program types, refer to the
instruction manual of DAB tuner for <Program
Type Display>.
4Exit menu mode
Press the [MENU] button.
B64-3422-00EEnglish.Indd20B64-3422-00EEnglish.Indd20 06.4.259:52:19AM06.4.259:52:19AM