KERN 572-30 User manual

KERN & Sohn GmbH
Ziegelei 1
D-72336 Balingen
E-Mail: [email protected]
Tel: +49-[0]7433- 9933-0
Fax: +49-[0]7433-9933-149
Internet: www.kern-sohn.com
Operating instructions
Precision/ compact balances and
platform scales
KERN 572/573/KB/DS/FKB/FCB
Version 5.7
12/2009
GB
572/573/KB/DS/FKB/FCB-BA-e-0957

572/573/KB/DS/FKB/FCB/PCB-BA-e-0957
2
GB KERN 572/573/KB/DS/FKB/FCB
Version 5.7 12/2009
Operating instruction
Precision/compact balances and platform scales
Table of contents:
1MODE - MENUE .......................................................................................................3
2Technical data .........................................................................................................4
2.1 KERN 572............................................................................................................................................. 4
2.2 KERN 573............................................................................................................................................. 7
2.3 KERN KB ............................................................................................................................................. 8
2.4 KERN DS............................................................................................................................................ 12
2.5 KERN FCB ......................................................................................................................................... 17
2.6 KERN FKB ......................................................................................................................................... 19
3Fundamental information (general) .....................................................................22
3.1 Intended use...................................................................................................................................... 22
3.2 Inappropriate use ............................................................................................................................. 22
3.3 Guarantee .......................................................................................................................................... 22
3.4 Monitoring the test substances ...................................................................................................... 22
4Fundamental safety information..........................................................................23
4.1 Observe the information in the operating instructions ................................................................ 23
4.2 Staff training...................................................................................................................................... 23
5Transport and storage ..........................................................................................23
5.1 Acceptance check ............................................................................................................................ 23
5.2 Packaging.......................................................................................................................................... 23
6Unpacking, installation and commissioning ......................................................23
6.1 Place of installation, place of use................................................................................................... 23
6.2 Unpacking ......................................................................................................................................... 24
6.2.1 Installation........................................................................................................................................... 24
6.3 Mains supply ..................................................................................................................................... 24
6.4 Battery operation FKB...................................................................................................................... 24
6.5 Connecting peripheral equipment .................................................................................................. 24
6.6 Initial start-up .................................................................................................................................... 24
6.7 Adjustment ........................................................................................................................................ 25
6.8 Adjusting (go to 7.2.6)...................................................................................................................... 25
6.8.1 Adjusting for verification (KERN 573; FKB-M; KB-NM; FCB-M; DS-M) ............................................. 25
6.9 Verification ........................................................................................................................................ 26
7Operation ...............................................................................................................27
7.1 Display control panel ....................................................................................................................... 27
7.2 Operation........................................................................................................................................... 28
7.3 Display background illumination .................................................................................................... 32
7.4 Interface RS 232 C ............................................................................................................................ 32
7.5 RS 232 C Data output via interface RS 232 C ................................................................................ 33
7.5.1 There are 5 methods for the data output via RS 232 C ..................................................................... 33
7.5.2 Description of the data transfer .......................................................................................................... 33
7.5.3 Numerator........................................................................................................................................... 34
7.6 Printer ................................................................................................................................................ 34
7.7 Underfloor weighing......................................................................................................................... 34
8Maintenance, upkeep, disposal ...........................................................................35
8.1 Cleaning............................................................................................................................................. 35
8.2 Maintenance, upkeep ....................................................................................................................... 35
8.3 Disposal............................................................................................................................................. 35
9Troubleshooting....................................................................................................35
10 Declaration of conformity.....................................................................................36

572/573/KB/DS/FKB/FCB-BA-e-0957 3
1 MODE - MENUE
Important!
The modified settings - as well as the adjustment - must be stored when switching-off,
via the ON/OFF button.
Manufacture Setting:

572/573/KB/DS/FKB/FCB/PCB-BA-e-0957
4
2 Technical data
2.1 KERN 572
KERN 572-30 572-31 572-32 572-33
Readability (d) 0.001 g 0.001 g 0.001 g 0.01 g
Weighing range (max) 241 g 301 g 421 g 1610 g
Taring range (subtractive) 241 g 301 g 421 g 1610 g
Reproducibility 0.001 g 0.001 g 0.001 g 0.01g
Linearity ± 0.003 g ± 0.005 g ± 0.005 g ± 0.03 g
Smallest piece weight 0.001 g 0.001 g 0.001 g 0.01 g
Adjustment points 50/100/
200/240 g 50/100/ 200/300 g 100/200/ 300/400 g 0.5/1.0/ 1.5/1.6 kg
Recommended adjusting
weight F1 (not supplied) 200 g 200 g +100 g 200 g + 200 g 1 kg + 500 g
Humidity of air max. 80% rel. (non-condensing)
Stabilization time (typical) 3 sec.
Permitted environmental
temperature +10 °C ... + 40 °C
Housing (B x D x H) mm 180 x 310 x 90
Vibration filter yes
Weighing plate stainless
steel mm Ø 106 Ø 106 Ø 106 Ø 150
Units see menu
Weight kg (net) 2.3 2.3 2.3 2.3
Data interface yes (RS232)

572/573/KB/DS/FKB/FCB-BA-e-0957 5
KERN 572-35 572-37 572-39 572-43
Readability (d) 0.01 g 0.01 g 0.01 g 0.1 g
Weighing range (max) 2410 g 3010 g 4210 g 10100 g
Taring range (subtractive) 2410 g 3010 g 4210 g 10100 g
Reproducibility 0.01 g 0.01 g 0.01 g 0.1g
Linearity ± 0.03 g ± 0.05 g ± 0.05 g ± 0.3 g
Smallest piece weight 0.01 g 0.01 g 0.01 g 0.1 g
Adjustment points 0.5/1.0/
2.0/2.4 kg 1.0/1.5/ 2.0/3.0 kg 1.0/2.0/ 3.0/4.0 kg 2/5/10 kg
Recommended adjusting
weight F1 (not supplied) 2 kg 2 kg + 1 kg 2 kg + 2 kg 10 kg
Humidity of air max. 80% rel. (non-condensing)
Stabilization time (typical) 3 sec.
Permitted environmental
temperature +10 °C ... + 40 °C
Housing (B x D x H) mm 180 x 310 x 90
Vibration filter yes
Weighing plate stainless
steel mm Ø 150 Ø 150 Ø 150 160 x 200
Units see menu
Weight kg (net) 2.3 2.3 2.3 2.7
Data interface yes (RS232)

572/573/KB/DS/FKB/FCB/PCB-BA-e-0957
6
KERN 572-45 572-49 572-55 572-57
Readability (d) 0.05 g 0.1 g 0.05 g 0.1 g
Weighing range (max) 12100 g 16100 g 20100 g 24100 g
Taring range (subtractive) 12100 g 16100 g 20100 g 24100 g
Reproducibility 0.05 g 0.1 g 0.05 g 0.1g
Linearity ± 0.15 g ± 0.3 g ± 0.25 g ± 0.3 g
Smallest piece weight 0.05 g 0.1 g 0.05 g 0.1 g
Adjustment points 2/5/10/12 kg 5/10/15/16 kg 5/10/15/20 kg 5/10/15/20/24 kg
Recommended adjusting
weight F1 (not supplied) 10 kg 10 kg + 5 kg 20 kg 20 kg
Humidity of air max. 80% rel. (non-condensing)
Stabilization time (typical) 3 sec.
Permitted environmental
temperature +10 °C ... + 40 °C
Housing (B x D x H) mm 180 x 310 x 90
Vibration filter yes
Weighing plate stainless
steel mm 160 x 200 160 x 200 160 x 200 160 x 200
Units see menu
Weight kg (net) 2.7 2.7 2.7 2.7
Data interface yes (RS232)

572/573/KB/DS/FKB/FCB-BA-e-0957 7
2.2 KERN 573
KERN 573-34NM 573-36NM 573-46NM 573-56NM
Accuracy class II II II II
Readability (d) 0.01 g 0.01 g 0.1 g 0.1 g
Verification value (e) 0.1 g 0.1 g 1 g 1 g
Weighing range (max) 650 g 2000 g 6500 g 20000 g
Minimum load (Min) 0.5 g 0.5 g 5 g 5 g
Taring range (subtractive) 650 g 2 000 g 6500 g 20000 g
Reproducibility 0.01 g 0.01 g 0.1 g 0.1g
Linearity ± 0.03 g ± 0.03 g ± 0.3 g ± 0.3 g
Smallest piece weight 0.01 g 0.01 g 0.1 g 0.1 g
Adjustment points 200g/500g/600g 500g/1000g/
2 000g 2/5/6 kg 5/10/20 kg
Recommended adjusting
weight F1 (not supplied) 600 g / F1 2 kg / F1 5 kg / F2 20 kg / F1
Humidity of air max. 80% rel. (non-condensing)
Stabilization time (typical) 3 sec.
Permitted environmental
temperature +10 °C ... + 30 °C
Housing (B x D x H) mm 180 x 310 x 90
Vibration filter yes
Weighing plate stainless
steel mm Ø 150 Ø 150 160 x 200 160 x 200
Units g, kg g, kg g, kg g, kg
Weight kg (net) 2.3 2.3 2.7 2.7
Data interface yes (RS232)

572/573/KB/DS/FKB/FCB/PCB-BA-e-0957
8
2.3 KERN KB
KERN KB 120-3N KB 200-3N KB 240-3N KB 360-3N
Readability (d) 0.001 g 0.001 g 0.001 g 0.001 g
Weighing range (max) 121 g 201 g 241 g 361 g
Taring range (subtractive) 121 g 201 g 241 g 361 g
Reproducibility 0.001 g 0.001 g 0.001 g 0.001g
Linearity ± 0.003 g ± 0.003 g ± 0.003 g ± 0.005 g
Smallest piece weight 0.001 g 0.001 g 0.001 g 0.001 g
Adjustment points 20/50/100/120 g 50/100/150/200 g 100/150/
200/240 g 100/200/ 300/360 g
Recommended adjusting
weight F1 (not supplied) 100 g 200 g 200 g 200 g + 100 g
Humidity of air max. 80% rel. (non-condensing)
Stabilization time (typical) 3 sec.
Permitted environmental
temperature +10 °C ... + 40 °C
Housing (B x D x H) mm 167 x 250 x 85
Vibration filter yes
Weighing plate stainless
steel mm Ø 81 Ø 81 Ø 81 Ø 81
Units see menu
Weight kg (net) 1 1 1 1
Data interface yes (RS232)

572/573/KB/DS/FKB/FCB-BA-e-0957 9
KERN KB 1200-2N KB 2000-2N KB 2400-2N KB 3600-2N
Readability (d) 0.01 g 0.01 g 0.01 g 0.01 g
Weighing range (max) 1 210 g 2 010 g 2 410 g 3 610 g
Taring range (subtractive) 1 210 g 2 010 g 2 410 g 3 610 g
Reproducibility 0.01 g 0.01 g 0.01 g 0.01g
Linearity ± 0.03 g ± 0.03 g ± 0.03 g ± 0.05 g
Smallest piece weight 0.01 g 0.01 g 0.01 g 0.01 g
Adjustment points 0.2/0.5/1.0/1.2 kg 0.5/1.0/1.5/2.0 kg 1.0/1.5/2.0/2.4 kg 1.0/2.0/3.0/3.6 kg
Recommended adjusting
weight F1 (not supplied) 1 000 g 2 000 g 2 000 g 2 kg + 1 kg
Humidity of air max. 80% rel. (non-condensing)
Stabilization time (typical) 3 sec.
Permitted environmental
temperature +10 °C ... + 40 °C
Housing (B x D x H) mm 167 x 250 x 85
Vibration filter yes
Weighing plate stainless
steel mm 130 x 130 130 x 130 130 x 130 130 x 130
Units see menu
Weight kg (net) 1.5 1.5 1.5 1.5
Data interface yes (RS232)

572/573/KB/DS/FKB/FCB/PCB-BA-e-0957
10
KERN KB
10000-1N
KB
10k0.05N
Accuracy class
Readability (d) 0.1 g 0.05 g
Weighing range (max) 10 100 g 10 100 g
Taring range (subtractive) 10 100 g 10 100 g
Reproducibility 0.1 g 0.05 g
Linearity 0.3 g 0.15 g
Smallest piece weight 0.1 g 0.05 g
Adjustment points 2/5/10 kg 2/5/10 kg
Recommended adjusting
weight F1 (not supplied) 10 kg 10 kg
Stabilization time (typical) 3 sec. 3 sec.
Permitted environmental tem-
perature +10 °C ... + 40 °C +10 °C ... + 40 °C
Housing (B x D x H) mm 167 x 250 x 85 167 x 250 x 85
Weighing plate stainless steel
mm 150 x 170 150 x 170
Units see menu see menu
Vibration filter yes yes
Weight kg (net) 1.7 1.7
Data interface yes (RS232) yes (RS232)

572/573/KB/DS/FKB/FCB-BA-e-0957 11
KERN KB
650-2NM KB 6500-1NM KB 2000-2NM KB 10000-1NM
Accuracy class II II II II
Readability (d) 0.01 g 0.1 g 0.01 g 0.1 g
Verification value (e) 0.1 g 1 g 0.1 g 1 g
Weighing range (max) 650 g 6 500 g 2 000 g 10 000 g
Minimum load (Min) 0.5 g 5 g 0.5 g 5 g
Taring range (subtractive) 650 g 6 500 g 2 000 g 10 000 g
Reproducibility 0.01 g 0.1 g 0.01 g 0.1g
Linearity ± 0.03 g ± 0.3 g ± 0.03 g ± 0.3 g
Smallest piece weight 0.01 g 0.1 g 0.01 g 0.1 g
Adjustment points 200/500/600 g 2/5/6 kg 0.5/1.0/1.5/2.0 kg 2/5/10 kg
Recommended adjusting
weight F1 (not supplied) 600 g 6.0 kg 2 000 g 10 kg
Stabilization time (typical) 3 sec.
Permitted environmental
temperature +10 °C ... + 30 °C
Housing (B x D x H) mm 167 x 250 x 85
Vibration filter yes
Weighing plate stainless
steel mm 130 x 130 150 x 170 130 x 130 150 x 170
Units g, kg, ct
Weight kg (net) 1.5 1.7 1.5 1.7
Data interface yes (RS232)

572/573/KB/DS/FKB/FCB/PCB-BA-e-0957
12
2.4 KERN DS
KERN DS
3K0.01S DS 5K0.05S DS 8K0.05 DS 10K0.1S
Readability (d) 0.01 g 0.05 g 0.05 g 0,1 g
Weighing range (max) 3 100 g 5 100 g 8 100 g 10.100 g
Taring range (subtractive) 3 100 g 5 100 g 8 100 g 10.100 g
Reproducibility 0.02 g 0.05 g 0.05 g 0.1 g
Linearity ± 0.05 g ± 0.15 g ± 0.15 g ±0.3 g
Smallest piece weight 0.01 g 0.05 g 0.05 g 0.1 g
Adjustment points 1/2/3 kg 2/5/10 kg 2/4/5/7/8 kg 2/5/10 kg
Recommended adjusting
weight F1 (not supplied) 3 kg 10 kg 5 kg + 2 kg 10 kg
Humidity of air max. 80% rel. (non-condensing)
Stabilization time (typical) 3 sec.
Permitted environmental
temperature +10 °C ... + 40 °C
Housing (B x D x H) mm 228 x 228 x 70 228 x 228 x 70 315 x 305 x 70 228 x 228 x 70
Vibration filter
Weighing plate stainless
steel mm 228 x 228 228 x 228 315 x 305 228 x 228
Units see menu see menu see menu see menu
Weight kg (net) 5.5 5.5 7.5 5,5
Data interface yes (RS232)

572/573/KB/DS/FKB/FCB-BA-e-0957 13
KERN DS
16K0.1 DS 20K0.1 DS 30K0.1
Accuracy class
Readability (d) 0.1 g 0.1 g 0.1 g
Verification value (e)
Weighing range (max) 16 100 g 20 100 g 30 100 g
Minimum load (Min)
Taring range (subtractive) 16 100 g 20 100 g 30 100 g
Reproducibility 0.1 g 0.1 g 0.1g
Linearity ± 0.3 g ± 0.3 g ± 0.3 g
Smallest piece weight 0.1 g 0.1 g 0.1 g
Adjustment points 5/10/15/16 kg 5/10/15/20 kg 10/15/20/30 kg
Recommended adjusting
weight F1 (not supplied) 10 kg + 5 kg 20kg 20 kg + 10 kg
Humidity of air max. 80% rel. (non-condensing)
Stabilization time (typical) 3 sec.
Permitted environmental
temperature +10 °C ... + 40 °C
Housing (B x D x H) mm 315 x 305 x 70
Vibration filter yes
Weighing plate stainless
steel mm 315 x 305 315 x 305 315 x 305
Units see menu see menu see menu
Weight kg (net) 7.5 7.5 7.5
Data interface yes (RS232)

572/573/KB/DS/FKB/FCB/PCB-BA-e-0957
14
KERN DS
36K0.2 DS 30K0.1L DS 36K0.2L DS 60K0,2
Accuracy class
Readability (d) 0.2 g 0.1 g 0.2 g 0.2 g
Verification value (e)
Weighing range (max) 36 100 g 30 100 g 36 100 g 60 100 g
Minimum load (Min)
Taring range (subtractive) 36 100 g 30 100 g 36 100 g 60 100 g
Reproducibility 0.2 g 0.1 g 0.2 g 0.2g
Linearity ± 0.6 g ± 0.3 g ± 0.6 g ± 0.6 g
Smallest piece weight 0.2 g 0.1 g 0.2 g 0.2 g
Adjustment points 10/15/20/
30/36 kg 10/15/20/ 30 kg 10/15/20/ 30/36 kg 20/30/50/60 kg
Recommended adjusting
weight F1 (not supplied) 20 kg + 10 kg 20 kg + 10 kg 20 kg + 10 kg 50 kg
Humidity of air max. 80% rel. (non-condensing)
Stabilization time (typical) 3 sec.
Permitted environmental
temperature +10 °C ... + 40 °C
Housing (B x D x H) mm 315 x 305 x 70 450 x 350 x 115
Vibration filter yes
Weighing plate stainless
steel mm 315 x 305 450 x 350
Units see menu see menu see menu see menu
Weight kg (net) 7.5 9.5 9.5 9.5
Data interface yes (RS232)

572/573/KB/DS/FKB/FCB-BA-e-0957 15
KERN DS
65K0.5 DS 100K0.5 DS 150K1
Readability (d) 0,5 g 0,5 g 1 g
Weighing range (max) 65 100 g 101 000 g 151 000 g
Taring range (subtractive) 65 100 g 101 000 g 151 000 g
Reproducibility 0,5 g 0,5 g 1 g
Linearity ± 1,5 g ± 1,5 g ± 3 g
Smallest piece weight 0,5 g 0,5 g 1 g
Adjustment points 20/30/50/60 kg 20/50/100 kg 50/100/150 kg
Recommended adjusting
weight F1 (not supplied) 50 kg 50 kg + 50 kg 3 x 50 kg
3 x 50 kg
Humidity of air max. 80% rel. (non-condensing)
Stabilization time (typical) 3 sec.
Permitted environmental
temperature +10 °C ... + 40 °C
Housing (B x D x H) mm 450 x 350 x 115
Vibration filter yes
Weighing plate stainless
steel mm 450 x 350
Units see menu see menu see menu
Weight kg (net) 9.5
Data interface yes (RS232)

572/573/KB/DS/FKB/FCB/PCB-BA-e-0957
16
KERN DS
15K0.1M DS 65K1M DS 150K1M DS 50K1TM DS 100K2TM
Accuracy class II II II III III
Readability (d) 0.1 g 1 g 1 g 1 g / 2 g / 5 g 2 g / 5 g /10
g
Verification value (e) 1 g 10 g 10 g 1 g / 2 g / 5 g 2 g / 5 g /10
g
Weighing range (max) 15 000 g 65 000 g 150 000 g 10 kg/ 20 kg/
50 kg 20 kg/ 50 kg/ 100 kg
Minimum load (Min) 5 g 50 g 50g 50 g 100 g
Taring range (subtractive) 15 000 g 65 000 g 150 000 g 50 000 g 100 000 g
Reproducibility 0.1 g 1 g 1 g 1 g 1 g
Linearity ± 0.3 g ± 2 g ± 3 g ± 2 g
Smallest piece weight 0.1 g 1 g 1 g 1 g
Adjustment points 5/10/15/kg 20/30/50/
60 kg 50/100/ 150 kg 20/40/50 kg 50/100g
Recommended adjusting
weight F1 (not supplied) 10 kg + 5 kg 50 kg 3 x 50 kg 50 kg 2 x 50 kg
Humidity of air max. 80% rel. (non-condensing)
Stabilization time (typical) 3 sec.
Permitted environmental
temperature +10 °C ... + 30 °C +10 °C ... + 40 °C
Housing (B x D x H) mm 315 x 305 x 70 450 x 350 x 115
Vibration filter yes
Weighing plate stainless
steel mm 315 x 305 450 x 350
Units see menu see menu see menu see menu see menu
Weight kg (net) 7.5 9.5 9.5 9.5 9.5
Data interface yes (RS232)

572/573/KB/DS/FKB/FCB-BA-e-0957 17
2.5 KERN FCB
KERN FCB
6K0.02B FCB 12K0.05B FCB 12K0.1B FCB 24K0.1B FCB 24K0.2B
Readability (d) 0.02 g 0.05 g 0.1 g 0.1 g 0.2 g
Weighing range (max) 6 100 g 12 100 g 12 100 g 24 100 g 24 100 g
Taring range (subtrac-
tive) 6 100 g 12 100 g 12 100 g 24 100 g 24 100 g
Reproducibility 0.02 g 0.05 g 0.1 g 0.1 g 0.2 g
Linearity ± 0.06 g 0.15 g 0.3 g 0.3 g 0.6 g
Smallest piece weight 0.02 g 0.05 g 0.1 g 0.1 g 0.2 g
Adjustment points 2/5/6 kg 2/5/10/12 kg 2/5/10/12 kg 5/10/15/
20/24 kg 5/10/15/ 20/24 kg
Recom. adjustment
weight F1
(not added) 5 kg 10 kg 10 kg 20 kg 20 kg
Humidity of air max. 80% rel. (non-condensing)
Stabilization time (typi-
cal) 3 sec.
Permitted environ-
mental temperature + 10 °C ... + 40 °C
Vibration filter yes
Housing
(B x D x H) mm 270 x 345 x 106 270 x 345 x 106 270 x 345 x 106 270 x 345 x 106 270 x 345 x 106
Weighing plate,
stainless steel 253x228 253x228 253x228 253x228 253x228
Units see menu
Vibration filter yes
Weight kg (net) 3.3 3.3 3.3 3.3 3.3
Data interface yes (RS232)

572/573/KB/DS/FKB/FCB/PCB-BA-e-0957
18
KERN FCB
8K0.1BM FCB 15K0.1BM FCB 15K1BDM
Accuracy class II II III
Readability (d) 0.1 g 0.1 g 1 g
Verification value (e) 1 g 1 g 1 g / 2 g
Weighing range (max) 8 000 g 15 000 g 7.5 kg / 15 kg
Minimum load (Min) 5 g 5 g 50 g
Taring range (subtractive) 8 000 g 15 000 g 50 000 g
Reproducibility 0.1 g 0.1 g 1g
Linearity ± 0.2 g ± 0.3 g ±3 g
Smallest piece weight 0.1 g 0.1 g 1 g
Adjustment points 5/8 kg 5/10/15 kg 5/10/15 kg
Recommended adjusting
weight F1 (not supplied) 5 kg + 2 kg 15 kg 15 kg
Humidity of air max. 80% rel. (non-condensing)
Stabilization time (typical) 3 sec.
Permitted environmental
temperature +10 °C ... + 30 °C +10 °C ... + 40 °C
Housing (B x D x H) mm 270 x 345 x 106
Vibration filter yes
Weighing plate stainless
steel mm 253 x 228
Units g, kg
Weight kg (net) 3.3
Data interface yes (RS232)

572/573/KB/DS/FKB/FCB-BA-e-0957 19
2.6 KERN FKB
KERN FKB
6K0.02 FKB 8K0.05 FKB 16K0.05 FKB 16K0.1
Readability (d) 0.02 g 0.05 g 0.05 g 0.1 g
Weighing range (max) 6 100 g 8 100 g 16 100 g 16 100 g
Taring range (subtractive) 6 100 g 8 100 g 16 100 g 16 100 g
Reproducibility 0.02 g 0.05 g 0.05 g 0.1g
Linearity ± 0.06 g ± 0.15 g ± 0.25 g ± 0.3 g
Smallest piece weight 0.02 g 0.05 g 0.05 g 0.1 g
Adjustment points 2/4/5/6 kg 2/4/5/7/8 kg 5/10/15/16 kg 5/10/15/16 kg
Recommended adjusting
weight F1 (not supplied) 5 kg 5 kg + 2 kg 10 kg + 5 kg 10 kg + 5 kg
Humidity of air max. 80% rel. (non-condensing)
Stabilization time (typical) 3 sec.
Permitted environmental
temperature +10 °C ... + 40 °C
Housing (B x D x H) mm 350 x 390 x 120
Vibration filter yes
Weighing plate stainless
steel mm 340 x 240 340 x 240 340 x 240 340 x 240
Units see menu see menu see menu see menu
Weight kg (net) 6.5 6.5 6.5 6.5
Data interface yes (RS232)

572/573/KB/DS/FKB/FCB/PCB-BA-e-0957
20
KERN FKB
36K0.1 FKB 36K0.2 FKB 65K0.2 FKB 65K0.5
Readability (d) 0.1 g 0.2 g 0.2 g 0.5 g
Verification value (e)
Weighing range (max) 36 100 g 36 100 g 65 100 g 65 100 g
Minimum load (Min)
Taring range (subtractive) 36 100 g 36 100 g 65 100 g 65 100 g
Reproducibility 0.1 g 0.2 g 0.2 g 0. g
Linearity ± 0.5 g ± 0.6 g ± 1.0 g ± 1.5 g
Smallest piece weight 0.1 g 0.2 g 0.2 g 0.5 g
Adjustment points 10/20/30/36 kg 10/20/30/36 kg 20/30/50/60 kg 20/30/50/60 kg
Recommended adjusting
weight F1 (not supplied) 20 kg + 10 kg 20 kg + 10 kg 50kg 50kg
Humidity of air max. 80% rel. (non-condensing)
Stabilization time (typical) 3 sec.
Permitted environmental
temperature +10 °C ... + 40 °C
Housing (B x D x H) mm 350 x 390 x 120
Vibration filter yes
Weighing plate stainless
steel mm 340 x 240 340 x 240 340 x 240 340 x 240
Units see menu see menu see menu see menu
Weight kg (net) 6.5 6.5 6.5 6.5
Data interface yes (RS232)