TCKE-A/-B-BA-e-2333 2
7.8 Adjustment .................................................................................................. 16
7.8.1 External adjustment <CalExt > ................................................................17
7.8.2 External adjustment with user-defined adjustment weight < caleud >.......18
7.8.3 Gravitational constant adjustment location < graadj >..............................20
7.8.4 Gravitational constant place of location < grause >...................................21
8Basic Operation ................................................................................................. 22
8.1 Turn on/off................................................................................................... 22
8.2 Simple weighing .......................................................................................... 22
8.3 Taring.......................................................................................................... 23
8.4 Change-over button (standard settings)...................................................... 24
8.4.1 Switch-over weighing unit................................................................................24
8.5 Under-floor weighing (optional, varies by model) ........................................ 26
9Application <Counting>...................................................................................... 27
9.1 Application-specific settings ........................................................................ 27
9.2 Piece counting............................................................................................. 28
9.2.1 Counting with reference quantity 5, 10 or 20...................................................28
9.2.2 Counting with freely selectable reference quantiy < FrEE>. .........................29
9.2.3 Counting with optional piece weight ................................................................30
9.3 Target counting ........................................................................................... 31
9.4 Check counting............................................................................................ 34
9.5 PRE-TARE.................................................................................................. 37
9.5.1 Take over the placed weight as PRE-TARE value...........................................37
9.5.2 Enter the known tare weight numerically < PtaremanuAl >................38
9.6 Weighing Units ............................................................................................ 39
9.6.1 Setting weighing unit.......................................................................................39
9.6.2 Weighing with multiplication factor via the application unit <FFA>...................40
10 Menu............................................................................................................... 41
10.1 Navigation in the menu............................................................................. 41
10.2 Application menu...................................................................................... 41
10.3 Setup menu.............................................................................................. 42
10.3.1 Overview < setup>>...................................................................................42
11 Communication with peripheral devices via KUP connection ......................... 47
11.1 KERN Communications Protocol (KERN Interface Protocol)................... 48
11.2 Issue functions......................................................................................... 49
11.2.1 Add-up mode < sum >...................................................................................49
11.2.2 Data output after pressing the PRINT button < manual >...........................51
