Kero-sun Laser clean lc-44 (type a) User manual

LC-43G

Fan Heater Inverter

Laser Clean

INSTRUCTIONS’ MANUAL

ΕΓΧΕΙΡΙΔΙΟ ΧΡΗΣΗΣ

LC-44 (Type A)

ENGLISH

ENGLISH ________________________ 3

SPECIFICATIONS ___________________________________3

PART NAME _______________________________________3

OPERATION _______________________________________7

EMERGENCY MESSAGE ___________________________12

ROUTINE MAINTENANCE __________________________13

TROUBLESHOOTING ______________________________14

LONG TERM STORAGE_____________________________15

ΕΛΛΗΝΙΚΑ_______________________ 16

ΤΕΧΝΙΚΑ ΧΑΡΑΚΤΗΡΙΣΤΙΚΑ _________________________16

ΜΕΡΗ ΤΗΣ ΣΥΣΚΕΥΗΣ _____________________________16

ΛΕΙΤΟΥΡΓΙΑ ______________________________________20

ΜΗΝΥΜΑ ΠΙΘΑΝΗΣ ΒΛΑΒΗΣ ________________________25

ΣΥΝΤΗΡΗΣΗ______________________________________26

ΠΡΟΒΛΗΜΑΤΑ – ΛΥΣΕΙΣ ___________________________27

ΑΠΟΘΗΚΕΥΣΗ ___________________________________28

IMPORTANT

READ AND UNDERSTAND INSTRUCTIONS BEFORE USING HEATER.

RETAIN INSTRUCTIONS FOR FUTURE REFERENCE.

ΠΡΟΣΟΧΗ

ΔΙΑΒΑΣΤΕ ΠΡΟΣΕΚΤΙΚΑ ΑΥΤΕΣ ΤΙΣ ΟΔΗΓΙΕΣ ΧΡΗΣΕΩΣ ΠΡΙΝ ΤΗΝ ΧΡΗΣΗ ΤΗΣ ΘΕΡΜΑΣΤΡΑΣ.

ΦΥΛΑΞΤΕ ΤΙΣ ΟΔΗΓΙΕΣ ΧΡΗΣΕΩΣ ΓΙΑ ΜΕΛΛΟΝΤΙΚΗ ΑΝΑΦΟΡΑ ΣΕ ΑΥΤΕΣ.

EN GLISH ________________________ 3

SPECIFICATIONS___________________________________3

PART NAME _______________________________________3

OPERATION _______________________________________7

EMERGENCYMESSAGE ___________________________12

ROUTINE MAINTENANCE __________________________13

TROUBLESHOOTING ______________________________14

LONG TERM STORAGE_____________________________15

_______________________ 16

_________________________16

_____________________________16

______________________________________20

________________________25

______________________________________26

___________________________27

___________________________________28

IMPORTANT

READ AND UNDERSTAND INSTRUCTIONS BEFORE USING HEATER.

RETAININSTRUCTIONS FORFUTURE REFERENCE.

ENGLISH ________________________ 3

SPECIFICATIONS ___________________________________3

PART NAME _______________________________________3

OPERATION _______________________________________7

EMERGENCY MESSAGE ___________________________12

ROUTINE MAINTENANCE __________________________13

TROUBLESHOOTING ______________________________14

LONG TERM STORAGE_____________________________15

ΕΛΛΗΝΙΚΑ_______________________ 16

ΤΕΧΝΙΚΑ ΧΑΡΑΚΤΗΡΙΣΤΙΚΑ _________________________16

ΜΕΡΗ ΤΗΣ ΣΥΣΚΕΥΗΣ _____________________________16

ΛΕΙΤΟΥΡΓΙΑ ______________________________________20

ΜΗΝΥΜΑ ΠΙΘΑΝΗΣ ΒΛΑΒΗΣ ________________________25

ΣΥΝΤΗΡΗΣΗ______________________________________26

ΠΡΟΒΛΗΜΑΤΑ – ΛΥΣΕΙΣ ___________________________27

ΑΠΟΘΗΚΕΥΣΗ ___________________________________28

IMPORTANT

READ AND UNDERSTAND INSTRUCTIONS BEFORE USING HEATER.

RETAIN INSTRUCTIONS FOR FUTURE REFERENCE.

ΠΡΟΣΟΧΗ

ΔΙΑΒΑΣΤΕ ΠΡΟΣΕΚΤΙΚΑ ΑΥΤΕΣ ΤΙΣ ΟΔΗΓΙΕΣ ΧΡΗΣΕΩΣ ΠΡΙΝ ΤΗΝ ΧΡΗΣΗ ΤΗΣ ΘΕΡΜΑΣΤΡΑΣ.

ΦΥΛΑΞΤΕ ΤΙΣ ΟΔΗΓΙΕΣ ΧΡΗΣΕΩΣ ΓΙΑ ΜΕΛΛΟΝΤΙΚΗ ΑΝΑΦΟΡΑ ΣΕ ΑΥΤΕΣ.

ENGLISH

operation panel

SPECIFICATIONS

* Matching Room Size to HEAT RATING •Be-

cause the “Heat Load” of an area to be heated

is inuenced by so many factors, it is impos-

sible to specify a heater output to an exact

room size.

•If you use a heater too large for the area to

be heated, the temperature you desire will be

reached quickly. In such cases, to avoid over-

heating the area, the heater must be turned off

frequently, or doors opened to other areas of

the house, or windows to the outside opened

to cool the area.

•If you use a heater too small for the area to be

heated, it will take much longer to reach the de-

sired temperature, in fact it may not be reached

at all depending on the outside weather condi-

tions.

MODEL LC-43G

HEAT RATING High 14,300 BTU / 4.2 kW

Low 3,800 BTU / 1.1 kW

FUEL TANK CAPACITY 7.6 lit.

BURNING TIME 19.0 ~69.0 hrs.

DIMENSIONS(W x D x H) 435 x 315 x 437 mm

WEIGHT 11.5 kg

VOLTAGE / FREQUENCY 230V AC, 50 Hz

ELECTRICAL

CONSUMPTION

Igniter : 320 W

Continuous : 25 W

PART NAME

BEFORE USING HEATER, FAMILIARIZE YOURSELF WITH THE FOLLOWING OPERATING

CONTROLS AND PART NAMES.

MAIN BODY

Front panel

Louver

Removable fuel tank

Room

thermistor

Circulation

fan

Top plate

Carrying

handle

Air Filter

Power supply

cord

LC-44 (Type A)

Continuous : 24 W

ENGLISH

OPERATION PANEL

ON/OFF

Button/Lamp

Extension Key

Key-lock Button

Timer Key

Save Key

Digital Indicator

Adjustment Keys

Preheating mode

Heater in operation

Childproof Lock is on.

The Digital Indicator shows Set

temperature and Room temperature.

The Digital Indicator shows current time.

Heater in operation in timer mode.

The operation is in Save mode operation.

Oxygen level in room is insuficient.

Heater shuts off automatically.

Fuel tank empty. Only 10 minutes

burning time remaining. Digital indicator

shows the remaining burning time in minutes.

You can hear the alarm every 2 minutes.

Heater extinguished due to lack of fuel.

(10 seconds alarm)

ON/OFF Lamp

Key-lock Indicator

Temperature Indicator

Clock Indicator

Timer Lamp

Save Indicator

Fuel Indicator

Ventilation Indicator

—flashing :

constant :

—constant :

Extend remaining burning time.Extension key —constant :

flashing :

—flashing :

ENGLISH

UNPACKING AND PLACEMENT

1. Take out heater from box carefully to avoid damage.

2. Remove all packing materials from heater.

3. Make sure all screws are tight and all parts intact.

NOTE: Save shipping carton and all packing materials for future storage of your heater.

4. When positioning your heater for use, keep it away from walls and all other materials as illus-

trated below.

5. The floor should be firm and completely level. Reposition the heater, when it is not level.

NOTE: If your heater is not on a level surface, change its location. Do not attempt to prop heater

up with books or other objects.

ENGLISH

FUELING

WARNING: Use only water-clear kerosene (parafn).

Never use gasoline or other ammable

liquids.

ALWAYS extinguish heater before rell

heater fuel tank.

Fuel heater outside the living area.

1. Open the fuel tank lid on the top of heater cabinet and lift out the re-

movable fuel tank. Turn the removable tank upside down and remove

the fuel tank cap.

2. Insert the straight tube of the manual siphon into the jerrycans; insert

the siphon’s exible hose into the removable fuel tank opening.

3. Turn the air vent knob on the top of the siphon clockwise to close the

vent. Start the ow of kerosene (parafn) by squeezing the bulb of the

siphon vigorously six or seven times. Once ow begins, it is no longer

necessary to squeeze the bulb.

4. Check the removable tank fuel gauge while lling the tank. Stop lling

by loosening the switch button on top of the pump (turn anti-clock-

wise), once the gauge indicates that the tank is full. Never overll the

tank, especially not when the fuel is very cold (fuel expands when it

heats up).

NOTE: Be careful to avoid overlling the tank, especially with very cold

kerosene (parafn). Overow might occur due to expansion when the

fuel warms up.

5. Remove the siphon carefully, allowing excess kerosene (parafn) to

drain from the tube back into the jerrycans. Replace fuel tank cap and

tighten it securely. Be sure to wipe away any spilled kerosene (paraf-

n) from tank and other heater parts.

6. After making sure fuel tank cap is tightly fastened, invert tank and re-

place into heater body.

ENGLISH

OPERATION

CAUTION : Always make sure that there is sufcient ventilation.

SET CLOCK

It is only possible to set the correct time, when the

heater is connected to the mains and not burning.

1. Use the Adjustment Keys ( hour / min.) to

set the time.

2. To set the time, press “hour” and “min.” set but-

tons. Individual motions will increase the time by

one unit; holding continuously will raise either the

“hour” or “min.” rapidly. After approximately 10

seconds the blinking will stop and the setting will

be locked. 5 Minutes after switching off the heater,

the information on the display will disappear and

the heater will automatically switch into the stand-

by position.

IGNITION

1. Just press the button to ignite the heater. The

button will start blinking, indicating that the ignition

procedure has started. This will take a short while.

2. After this time heater will automatically ignite and

The button will cease its ashing. The Operation

Lamp will remain alight so long as heater is burn-

ing.

NOTE: If using your heater for the rst time, or after long term storage, ignition may not take place

on the rst try. Press the button again.

NOTE: Fuel pump may produce an audible operating noise at ignition. This is only temporary.

ENGLISH

OPERATION

CAUTION : Always make sure that there is sufcient ventilation.

SET CLOCK

It is only possible to set the correct time, when the

heater is connected to the mains and not burning.

1. Use the Adjustment Keys ( hour / min.) to

set the time.

2. To set the time, press “hour” and “min.” set but-

tons. Individual motions will increase the time by

one unit; holding continuously will raise either the

“hour” or “min.” rapidly. After approximately 10

seconds the blinking will stop and the setting will

be locked. 5 Minutes after switching off the heater,

the information on the display will disappear and

the heater will automatically switch into the stand-

by position.

IGNITION

1. Just press the button to ignite the heater. The

button will start blinking, indicating that the ignition

procedure has started. This will take a short while.

2. After this time heater will automatically ignite and

The button will cease its ashing. The Operation

Lamp will remain alight so long as heater is burn-

ing.

NOTE: If using your heater for the rst time, or after long term storage, ignition may not take place

on the rst try. Press the button again.

NOTE: Fuel pump may produce an audible operating noise at ignition. This is only temporary.

1 2

ENGLISH

TIMER IGNITION

Your heater can be arranged to ignite automatcally at a chosen time by use of a pre-set

“Timer”. This “Timer” can only be set after the clock setting has been completed.

1. Press the button and then the “Timer” key immediately after that.

The Timer Lamp and Digital Indicator will start blinking.

2. To set the “Timer” to the chosen igntion time, you should follow the

same procedure as given earlier for “Clock” time setting. After ap-

proximately 10 seconds, the digital indicator will return to “Clock”

mode, displaying the present time.

3. Your heater will now automatically start up the pre-set time.

4. If you wish to start up the heater at the pre-set time again, repeat the same procedure 1. men-

tioned above.

NOTE: The pre-set time will remain so long as the heater receives electrical power. In the event of

power failure or disconnection of heater for more than 10 minutes, timer setting will be cancelled.

NOTE: If normal ignition was used to set the heater burning (i.e. the heater is burning but the

Timer Lamp on the Indicator panel is out), pressing the Timer key will extinguish the heater, and

the heater will be put into the “Timer”mode.

ENGLISH

TIMER IGNITION

Your heater can be arranged to ignite automatcally at a chosen time by use of a pre-set

“Timer”. This “Timer” can only be set after the clock setting has been completed.

1. Press the button and then the “Timer” key immediately after that.

The Timer Lamp and Digital Indicator will start blinking.

2. To set the “Timer” to the chosen igntion time, you should follow the

same procedure as given earlier for “Clock” time setting. After ap-

proximately 10 seconds, the digital indicator will return to “Clock”

mode, displaying the present time.

3. Your heater will now automatically start up the pre-set time.

4. If you wish to start up the heater at the pre-set time again, repeat the same procedure 1. men-

tioned above.

NOTE: The pre-set time will remain so long as the heater receives electrical power. In the event of

power failure or disconnection of heater for more than 10 minutes, timer setting will be cancelled.

NOTE: If normal ignition was used to set the heater burning (i.e. the heater is burning but the

Timer Lamp on the Indicator panel is out), pressing the Timer key will extinguish the heater, and

the heater will be put into the “Timer”mode.

ENGLISH

TIMER IGNITION

Your heater can be arranged to ignite automatcally at a chosen time by use of a pre-set

“Timer”. This “Timer” can only be set after the clock setting has been completed.

1. Press the button and then the “Timer” key immediately after that.

The Timer Lamp and Digital Indicator will start blinking.

2. To set the “Timer” to the chosen igntion time, you should follow the

same procedure as given earlier for “Clock” time setting. After ap-

proximately 10 seconds, the digital indicator will return to “Clock”

mode, displaying the present time.

3. Your heater will now automatically start up the pre-set time.

4. If you wish to start up the heater at the pre-set time again, repeat the same procedure 1. men-

tioned above.

NOTE: The pre-set time will remain so long as the heater receives electrical power. In the event of

power failure or disconnection of heater for more than 10 minutes, timer setting will be cancelled.

NOTE: If normal ignition was used to set the heater burning (i.e. the heater is burning but the

Timer Lamp on the Indicator panel is out), pressing the Timer key will extinguish the heater, and

the heater will be put into the “Timer”mode.

ENGLISH

TEMPERATURE REGULATION

1. Use the Adjustment keys ( hour / min.) to adjust the temperature.

2. Adjust the temperature using the key on the right ( min.) to set the

temperature to a higher setting and the key on the left ( hour ) to

lower the temperature.

3. Until the room temperature has reached the set temperature, the

heater will burn at either high or medium burning mode. When the room temperature reaches

or slightly exceeds the set temperature, the heater will automatically shift to maintain the de-

sired temperature.

NOTE: The standard setting of the heater is 20°C. However, once the set temperature has been

changed the new setting will remain in effect unless changed.

NOTE: Room temperature measurements are taken directly behind the heater. These measure-

ments may not represent the true room temperature.

SAVE OPERATION

The “SAVE” function allows you to limit the temperature. When this

function is activated, the heater will automatically switch off, when the

room temperature exceeds the set temperarure by 3°C. Subsequently,

when the room temperature has dropped again to the set temperature,

the heater will automatically switch on again. Activate the “SAVE” set-

ting by pressing the Save key. The Save indicalor will light up. Switch off

the function by pressing the Save key once again.

NOTE: Without the “SAVE” setting your heater will maintain the set temperature by approximation

as well, by adjusting its heating capacity. “SAVE” is an economy setting, which you can use when,

for instance, you are not present in the room or to keep it frost-free.

ENGLISH

TEMPERATURE REGULATION

1. Use the Adjustment keys ( hour / min.) to adjust the temperature.

2. Adjust the temperature using the key on the right ( min.) to set the

temperature to a higher setting and the key on the left ( hour ) to

lower the temperature.

3. Until the room temperature has reached the set temperature, the

heater will burn at either high or medium burning mode. When the room temperature reaches

or slightly exceeds the set temperature, the heater will automatically shift to maintain the de-

sired temperature.

NOTE: The standard setting of the heater is 20°C. However, once the set temperature has been

changed the new setting will remain in effect unless changed.

NOTE: Room temperature measurements are taken directly behind the heater. These measure-

ments may not represent the true room temperature.

SAVE OPERATION

The “SAVE” function allows you to limit the temperature. When this

function is activated, the heater will automatically switch off, when the

room temperature exceeds the set temperarure by 3°C. Subsequently,

when the room temperature has dropped again to the set temperature,

the heater will automatically switch on again. Activate the “SAVE” set-

ting by pressing the Save key. The Save indicalor will light up. Switch off

the function by pressing the Save key once again.

NOTE: Without the “SAVE” setting your heater will maintain the set temperature by approximation

as well, by adjusting its heating capacity. “SAVE” is an economy setting, which you can use when,

for instance, you are not present in the room or to keep it frost-free.

ENGLISH

TEMPERATURE REGULATION

1. Use the Adjustment keys ( hour / min.) to adjust the temperature.

2. Adjust the temperature using the key on the right ( min.) to set the

temperature to a higher setting and the key on the left ( hour ) to

lower the temperature.

3. Until the room temperature has reached the set temperature, the

heater will burn at either high or medium burning mode. When the room temperature reaches

or slightly exceeds the set temperature, the heater will automatically shift to maintain the de-

sired temperature.

NOTE: The standard setting of the heater is 20°C. However, once the set temperature has been

changed the new setting will remain in effect unless changed.

NOTE: Room temperature measurements are taken directly behind the heater. These measure-

ments may not represent the true room temperature.

SAVE OPERATION

The “SAVE” function allows you to limit the temperature. When this

function is activated, the heater will automatically switch off, when the

room temperature exceeds the set temperarure by 3°C. Subsequently,

when the room temperature has dropped again to the set temperature,

the heater will automatically switch on again. Activate the “SAVE” set-

ting by pressing the Save key. The Save indicalor will light up. Switch off

the function by pressing the Save key once again.

NOTE: Without the “SAVE” setting your heater will maintain the set temperature by approximation

as well, by adjusting its heating capacity. “SAVE” is an economy setting, which you can use when,

for instance, you are not present in the room or to keep it frost-free.

1 2

ENGLISH

CHILDPROOF LOCK

The childproof lock can be used to prevent children accidentally chang-

ing the heater settings. When the heater is burning and the childproof

lock is on, the heater can only be switched off.

Other functions are blocked then. If the heater has already been

switched off, the childproof lock also prevents accidental ignition of the

heater.

Activate the childproof lock by pressing the Key-lock button and holding

it down for more 3 seconds. The Key-lock indicator will light up indicating that the childproof lock

has been activated. Switch off the childproof lock by pressing the Key-lock button and holding it

down for more than 3 seconds once again.

VENTILATION INDICATOR

When the VENT indicator starts blinking, this is a sign that the room is

not vented sufciently. If you do not provide additional ventilation, the

heater will switch off automatically after some time. If the indicator light

continues blinking after extra ventilation, please contact your dealer.

FUEL INDICATOR

When the Fuel Indicator lights up, it means that there is only fuel left for

10 more minutes. The count-down of the remaining heating time can be

seen in the Digital indicator. Now you have two options:

you remove the removable fuel tank and rell it outside the living

room or

you push the Extension key. By pushing this button, the remaining heating time will extend to

90 minutes. The heater will automatically switch back to its lowest position. In the display the

number 90 will appear, which will decline to 10. At the arrival of 10, you will hear an alarm signal

every two minutes, warning you to rell the removable tank. If you do not react, the heater will

extinguish by itself. The heater will also sound a warning signal, when it switches off. The Fuel

Indicator will blink, while four lines (--:--) are blinking in the Digital indicator. You can stop this by

pressing the button once more.

Once the heater has used up all its fuel and extinguished, it will take some time, after the rell,

before the heater is completely ready for use again.

ENGLISH

CHILDPROOF LOCK

The childproof lock can be used to prevent children accidentally chang-

ing the heater settings. When the heater is burning and the childproof

lock is on, the heater can only be switched off.

Other functions are blocked then. If the heater has already been

switched off, the childproof lock also prevents accidental ignition of the

heater.

Activate the childproof lock by pressing the Key-lock button and holding

it down for more 3 seconds. The Key-lock indicator will light up indicating that the childproof lock

has been activated. Switch off the childproof lock by pressing the Key-lock button and holding it

down for more than 3 seconds once again.

VENTILATION INDICATOR

When the VENT indicator starts blinking, this is a sign that the room is

not vented sufciently. If you do not provide additional ventilation, the

heater will switch off automatically after some time. If the indicator light

continues blinking after extra ventilation, please contact your dealer.

FUEL INDICATOR

When the Fuel Indicator lights up, it means that there is only fuel left for

10 more minutes. The count-down of the remaining heating time can be

seen in the Digital indicator. Now you have two options:

you remove the removable fuel tank and rell it outside the living

room or

you push the Extension key. By pushing this button, the remaining heating time will extend to

90 minutes. The heater will automatically switch back to its lowest position. In the display the

number 90 will appear, which will decline to 10. At the arrival of 10, you will hear an alarm signal

every two minutes, warning you to rell the removable tank. If you do not react, the heater will

extinguish by itself. The heater will also sound a warning signal, when it switches off. The Fuel

Indicator will blink, while four lines (--:--) are blinking in the Digital indicator. You can stop this by

pressing the button once more.

Once the heater has used up all its fuel and extinguished, it will take some time, after the rell,

before the heater is completely ready for use again.

ENGLISH

CHILDPROOF LOCK

The childproof lock can be used to prevent children accidentally chang-

ing the heater settings. When the heater is burning and the childproof

lock is on, the heater can only be switched off.

Other functions are blocked then. If the heater has already been

switched off, the childproof lock also prevents accidental ignition of the

heater.

Activate the childproof lock by pressing the Key-lock button and holding

it down for more 3 seconds. The Key-lock indicator will light up indicating that the childproof lock

has been activated. Switch off the childproof lock by pressing the Key-lock button and holding it

down for more than 3 seconds once again.

VENTILATION INDICATOR

When the VENT indicator starts blinking, this is a sign that the room is

not vented sufciently. If you do not provide additional ventilation, the

heater will switch off automatically after some time. If the indicator light

continues blinking after extra ventilation, please contact your dealer.

FUEL INDICATOR

When the Fuel Indicator lights up, it means that there is only fuel left for

10 more minutes. The count-down of the remaining heating time can be

seen in the Digital indicator. Now you have two options:

you remove the removable fuel tank and rell it outside the living

room or

you push the Extension key. By pushing this button, the remaining heating time will extend to

90 minutes. The heater will automatically switch back to its lowest position. In the display the

number 90 will appear, which will decline to 10. At the arrival of 10, you will hear an alarm signal

every two minutes, warning you to rell the removable tank. If you do not react, the heater will

extinguish by itself. The heater will also sound a warning signal, when it switches off. The Fuel

Indicator will blink, while four lines (--:--) are blinking in the Digital indicator. You can stop this by

pressing the button once more.

Once the heater has used up all its fuel and extinguished, it will take some time, after the rell,

before the heater is completely ready for use again.

ENGLISH

CHILDPROOF LOCK

The childproof lock can be used to prevent children accidentally chang-

ing the heater settings. When the heater is burning and the childproof

lock is on, the heater can only be switched off.

Other functions are blocked then. If the heater has already been

switched off, the childproof lock also prevents accidental ignition of the

heater.

Activate the childproof lock by pressing the Key-lock button and holding

it down for more 3 seconds. The Key-lock indicator will light up indicating that the childproof lock

has been activated. Switch off the childproof lock by pressing the Key-lock button and holding it

down for more than 3 seconds once again.

VENTILATION INDICATOR

When the VENT indicator starts blinking, this is a sign that the room is

not vented sufciently. If you do not provide additional ventilation, the

heater will switch off automatically after some time. If the indicator light

continues blinking after extra ventilation, please contact your dealer.

FUEL INDICATOR

When the Fuel Indicator lights up, it means that there is only fuel left for

10 more minutes. The count-down of the remaining heating time can be

seen in the Digital indicator. Now you have two options:

you remove the removable fuel tank and rell it outside the living

room or

you push the Extension key. By pushing this button, the remaining heating time will extend to

90 minutes. The heater will automatically switch back to its lowest position. In the display the

number 90 will appear, which will decline to 10. At the arrival of 10, you will hear an alarm signal

every two minutes, warning you to rell the removable tank. If you do not react, the heater will

extinguish by itself. The heater will also sound a warning signal, when it switches off. The Fuel

Indicator will blink, while four lines (--:--) are blinking in the Digital indicator. You can stop this by

pressing the button once more.

Once the heater has used up all its fuel and extinguished, it will take some time, after the rell,

before the heater is completely ready for use again.

ENGLISH

CHILDPROOF LOCK

The childproof lock can be used to prevent children accidentally chang-

ing the heater settings. When the heater is burning and the childproof

lock is on, the heater can only be switched off.

Other functions are blocked then. If the heater has already been

switched off, the childproof lock also prevents accidental ignition of the

heater.

Activate the childproof lock by pressing the Key-lock button and holding

it down for more 3 seconds. The Key-lock indicator will light up indicating that the childproof lock

has been activated. Switch off the childproof lock by pressing the Key-lock button and holding it

down for more than 3 seconds once again.

VENTILATION INDICATOR

When the VENT indicator starts blinking, this is a sign that the room is

not vented sufciently. If you do not provide additional ventilation, the

heater will switch off automatically after some time. If the indicator light

continues blinking after extra ventilation, please contact your dealer.

FUEL INDICATOR

When the Fuel Indicator lights up, it means that there is only fuel left for

10 more minutes. The count-down of the remaining heating time can be

seen in the Digital indicator. Now you have two options:

you remove the removable fuel tank and rell it outside the living

room or

you push the Extension key. By pushing this button, the remaining heating time will extend to

90 minutes. The heater will automatically switch back to its lowest position. In the display the

number 90 will appear, which will decline to 10. At the arrival of 10, you will hear an alarm signal

every two minutes, warning you to rell the removable tank. If you do not react, the heater will

extinguish by itself. The heater will also sound a warning signal, when it switches off. The Fuel

Indicator will blink, while four lines (--:--) are blinking in the Digital indicator. You can stop this by

pressing the button once more.

Once the heater has used up all its fuel and extinguished, it will take some time, after the rell,

before the heater is completely ready for use again.

ENGLISH

CHILDPROOF LOCK

The childproof lock can be used to prevent children accidentally chang-

ing the heater settings. When the heater is burning and the childproof

lock is on, the heater can only be switched off.

Other functions are blocked then. If the heater has already been

switched off, the childproof lock also prevents accidental ignition of the

heater.

Activate the childproof lock by pressing the Key-lock button and holding

it down for more 3 seconds. The Key-lock indicator will light up indicating that the childproof lock

has been activated. Switch off the childproof lock by pressing the Key-lock button and holding it

down for more than 3 seconds once again.

VENTILATION INDICATOR

When the VENT indicator starts blinking, this is a sign that the room is

not vented sufciently. If you do not provide additional ventilation, the

heater will switch off automatically after some time. If the indicator light

continues blinking after extra ventilation, please contact your dealer.

FUEL INDICATOR

When the Fuel Indicator lights up, it means that there is only fuel left for

10 more minutes. The count-down of the remaining heating time can be

seen in the Digital indicator. Now you have two options:

you remove the removable fuel tank and rell it outside the living

room or

you push the Extension key. By pushing this button, the remaining heating time will extend to

90 minutes. The heater will automatically switch back to its lowest position. In the display the

number 90 will appear, which will decline to 10. At the arrival of 10, you will hear an alarm signal

every two minutes, warning you to rell the removable tank. If you do not react, the heater will

extinguish by itself. The heater will also sound a warning signal, when it switches off. The Fuel

Indicator will blink, while four lines (--:--) are blinking in the Digital indicator. You can stop this by

pressing the button once more.

Once the heater has used up all its fuel and extinguished, it will take some time, after the rell,

before the heater is completely ready for use again.

ENGLISH

CHILDPROOF LOCK

The childproof lock can be used to prevent children accidentally chang-

ing the heater settings. When the heater is burning and the childproof

lock is on, the heater can only be switched off.

Other functions are blocked then. If the heater has already been

switched off, the childproof lock also prevents accidental ignition of the

heater.

Activate the childproof lock by pressing the Key-lock button and holding

it down for more 3 seconds. The Key-lock indicator will light up indicating that the childproof lock

has been activated. Switch off the childproof lock by pressing the Key-lock button and holding it

down for more than 3 seconds once again.

VENTILATION INDICATOR

When the VENT indicator starts blinking, this is a sign that the room is

not vented sufciently. If you do not provide additional ventilation, the

heater will switch off automatically after some time. If the indicator light

continues blinking after extra ventilation, please contact your dealer.

FUEL INDICATOR

When the Fuel Indicator lights up, it means that there is only fuel left for

10 more minutes. The count-down of the remaining heating time can be

seen in the Digital indicator. Now you have two options:

you remove the removable fuel tank and rell it outside the living

room or

you push the Extension key. By pushing this button, the remaining heating time will extend to

90 minutes. The heater will automatically switch back to its lowest position. In the display the

number 90 will appear, which will decline to 10. At the arrival of 10, you will hear an alarm signal

every two minutes, warning you to rell the removable tank. If you do not react, the heater will

extinguish by itself. The heater will also sound a warning signal, when it switches off. The Fuel

Indicator will blink, while four lines (--:--) are blinking in the Digital indicator. You can stop this by

pressing the button once more.

Once the heater has used up all its fuel and extinguished, it will take some time, after the rell,

before the heater is completely ready for use again.

ENGLISH

CHILDPROOF LOCK

The childproof lock can be used to prevent children accidentally chang-

ing the heater settings. When the heater is burning and the childproof

lock is on, the heater can only be switched off.

Other functions are blocked then. If the heater has already been

switched off, the childproof lock also prevents accidental ignition of the

heater.

Activate the childproof lock by pressing the Key-lock button and holding

it down for more 3 seconds. The Key-lock indicator will light up indicating that the childproof lock

has been activated. Switch off the childproof lock by pressing the Key-lock button and holding it

down for more than 3 seconds once again.

VENTILATION INDICATOR

When the VENT indicator starts blinking, this is a sign that the room is

not vented sufciently. If you do not provide additional ventilation, the

heater will switch off automatically after some time. If the indicator light

continues blinking after extra ventilation, please contact your dealer.

FUEL INDICATOR

When the Fuel Indicator lights up, it means that there is only fuel left for

10 more minutes. The count-down of the remaining heating time can be

seen in the Digital indicator. Now you have two options:

you remove the removable fuel tank and rell it outside the living

room or

you push the Extension key. By pushing this button, the remaining heating time will extend to

90 minutes. The heater will automatically switch back to its lowest position. In the display the

number 90 will appear, which will decline to 10. At the arrival of 10, you will hear an alarm signal

every two minutes, warning you to rell the removable tank. If you do not react, the heater will

extinguish by itself. The heater will also sound a warning signal, when it switches off. The Fuel

Indicator will blink, while four lines (--:--) are blinking in the Digital indicator. You can stop this by

pressing the button once more.

Once the heater has used up all its fuel and extinguished, it will take some time, after the rell,

before the heater is completely ready for use again.

ENGLISH

CHILDPROOF LOCK

The childproof lock can be used to prevent children accidentally chang-

ing the heater settings. When the heater is burning and the childproof

lock is on, the heater can only be switched off.

Other functions are blocked then. If the heater has already been

switched off, the childproof lock also prevents accidental ignition of the

heater.

Activate the childproof lock by pressing the Key-lock button and holding

it down for more 3 seconds. The Key-lock indicator will light up indicating that the childproof lock

has been activated. Switch off the childproof lock by pressing the Key-lock button and holding it

down for more than 3 seconds once again.

VENTILATION INDICATOR

When the VENT indicator starts blinking, this is a sign that the room is

not vented sufciently. If you do not provide additional ventilation, the

heater will switch off automatically after some time. If the indicator light

continues blinking after extra ventilation, please contact your dealer.

FUEL INDICATOR

When the Fuel Indicator lights up, it means that there is only fuel left for

10 more minutes. The count-down of the remaining heating time can be

seen in the Digital indicator. Now you have two options:

you remove the removable fuel tank and rell it outside the living

room or

you push the Extension key. By pushing this button, the remaining heating time will extend to

90 minutes. The heater will automatically switch back to its lowest position. In the display the

number 90 will appear, which will decline to 10. At the arrival of 10, you will hear an alarm signal

every two minutes, warning you to rell the removable tank. If you do not react, the heater will

extinguish by itself. The heater will also sound a warning signal, when it switches off. The Fuel

Indicator will blink, while four lines (--:--) are blinking in the Digital indicator. You can stop this by

pressing the button once more.

Once the heater has used up all its fuel and extinguished, it will take some time, after the rell,

before the heater is completely ready for use again.

ENGLISH

AUTOMATIC CLEANING MODE

When the heater has been burning continuously for two hours at its highest setting, the burner will

automatically start an autoclean procedure. The display will show the autocleaningcode run-

ning back to . The procedure takes 5 minutes, during which the heater will burn at its lowest

setting, while the burner autocleans. When the burner is clean again, the heater will automatically

switch back to the highest setting again.

TURNING OFF HEATER

While heater is burning, press power switch to “OFF” position. This will extinguish heater and ON/

OFF Lamp on the indicator panel will go out.

The circulation fan motor will operate further, for approximately 90 seconds to assist in cooling

down heater.

NEVER: Turn heater off by disconnecting the heater plug from the main elecrical supply.

DO NOT: Restart your heater for at least ten minutes.

AUTOMATIC DEACTIVATION

This heater is tted with a safety system that ensures that it swiches off automatically after 69

hours continuous operation.

The following will then appear in the display: . If desired, you can switch the heater on again

by pressing the button.

ENGLISH

AUTOMATIC CLEANING MODE

When the heater has been burning continuously for two hours at its highest setting, the burner will

automatically start an autoclean procedure. The display will show the autocleaningcode run-

ning back to . The procedure takes 5 minutes, during which the heater will burn at its lowest

setting, while the burner autocleans. When the burner is clean again, the heater will automatically

switch back to the highest setting again.

TURNING OFF HEATER

While heater is burning, press power switch to “OFF” position. This will extinguish heater and ON/

OFF Lamp on the indicator panel will go out.

The circulation fan motor will operate further, for approximately 90 seconds to assist in cooling

down heater.

NEVER: Turn heater off by disconnecting the heater plug from the main elecrical supply.

DO NOT: Restart your heater for at least ten minutes.

AUTOMATIC DEACTIVATION

This heater is tted with a safety system that ensures that it swiches off automatically after 69

hours continuous operation.

The following will then appear in the display: . If desired, you can switch the heater on again

by pressing the button.

ENGLISH

AUTOMATIC CLEANING MODE

When the heater has been burning continuously for two hours at its highest setting, the burner will

automatically start an autoclean procedure. The display will show the autocleaningcode run-

ning back to . The procedure takes 5 minutes, during which the heater will burn at its lowest

setting, while the burner autocleans. When the burner is clean again, the heater will automatically

switch back to the highest setting again.

TURNING OFF HEATER

While heater is burning, press power switch to “OFF” position. This will extinguish heater and ON/

OFF Lamp on the indicator panel will go out.

The circulation fan motor will operate further, for approximately 90 seconds to assist in cooling

down heater.

NEVER: Turn heater off by disconnecting the heater plug from the main elecrical supply.

DO NOT: Restart your heater for at least ten minutes.

AUTOMATIC DEACTIVATION

This heater is tted with a safety system that ensures that it swiches off automatically after 69

hours continuous operation.

The following will then appear in the display: . If desired, you can switch the heater on again

by pressing the button.

ENGLISH

AUTOMATIC CLEANING MODE

When the heater has been burning continuously for two hours at its highest setting, the burner will

automatically start an autoclean procedure. The display will show the autocleaningcode run-

ning back to . The procedure takes 5 minutes, during which the heater will burn at its lowest

setting, while the burner autocleans. When the burner is clean again, the heater will automatically

switch back to the highest setting again.

TURNING OFF HEATER

While heater is burning, press power switch to “OFF” position. This will extinguish heater and ON/

OFF Lamp on the indicator panel will go out.

The circulation fan motor will operate further, for approximately 90 seconds to assist in cooling

down heater.

NEVER: Turn heater off by disconnecting the heater plug from the main elecrical supply.

DO NOT: Restart your heater for at least ten minutes.

AUTOMATIC DEACTIVATION

This heater is tted with a safety system that ensures that it swiches off automatically after 69

hours continuous operation.

The following will then appear in the display: . If desired, you can switch the heater on again

by pressing the button.

ENGLISH

AUTOMATIC CLEANING MODE

When the heater has been burning continuously for two hours at its highest setting, the burner will

automatically start an autoclean procedure. The display will show the autocleaningcode run-

ning back to . The procedure takes 5 minutes, during which the heater will burn at its lowest

setting, while the burner autocleans. When the burner is clean again, the heater will automatically

switch back to the highest setting again.

TURNING OFF HEATER

While heater is burning, press power switch to “OFF” position. This will extinguish heater and ON/

OFF Lamp on the indicator panel will go out.

The circulation fan motor will operate further, for approximately 90 seconds to assist in cooling

down heater.

NEVER: Turn heater off by disconnecting the heater plug from the main elecrical supply.

DO NOT: Restart your heater for at least ten minutes.

AUTOMATIC DEACTIVATION

This heater is tted with a safety system that ensures that it swiches off automatically after 69

hours continuous operation.

The following will then appear in the display: . If desired, you can switch the heater on again

by pressing the button.

ENGLISH

AUTOMATIC CLEANING MODE

When the heater has been burning continuously for two hours at its highest setting, the burner will

automatically start an autoclean procedure. The display will show the autocleaningcode run-

ning back to . The procedure takes 5 minutes, during which the heater will burn at its lowest

setting, while the burner autocleans. When the burner is clean again, the heater will automatically

switch back to the highest setting again.

TURNING OFF HEATER

While heater is burning, press power switch to “OFF” position. This will extinguish heater and ON/

OFF Lamp on the indicator panel will go out.

The circulation fan motor will operate further, for approximately 90 seconds to assist in cooling

down heater.

NEVER: Turn heater off by disconnecting the heater plug from the main elecrical supply.

DO NOT: Restart your heater for at least ten minutes.

AUTOMATIC DEACTIVATION

This heater is tted with a safety system that ensures that it swiches off automatically after 69

hours continuous operation.

The following will then appear in the display: . If desired, you can switch the heater on again

by pressing the button.

ENGLISH

AUTOMATIC CLEANING MODE

When the heater has been burning continuously for two hours at its highest setting, the burner will

automatically start an autoclean procedure. The display will show the autocleaningcode run-

ning back to . The procedure takes 5 minutes, during which the heater will burn at its lowest

setting, while the burner autocleans. When the burner is clean again, the heater will automatically

switch back to the highest setting again.

TURNING OFF HEATER

While heater is burning, press power switch to “OFF” position. This will extinguish heater and ON/

OFF Lamp on the indicator panel will go out.

The circulation fan motor will operate further, for approximately 90 seconds to assist in cooling

down heater.

NEVER: Turn heater off by disconnecting the heater plug from the main elecrical supply.

DO NOT: Restart your heater for at least ten minutes.

AUTOMATIC DEACTIVATION

This heater is tted with a safety system that ensures that it swiches off automatically after 69

hours continuous operation.

The following will then appear in the display: . If desired, you can switch the heater on again

by pressing the button.

ENGLISH

AUTOMATIC CLEANING MODE

When the heater has been burning continuously for two hours at its highest setting, the burner will

automatically start an autoclean procedure. The display will show the autocleaningcode run-

ning back to . The procedure takes 5 minutes, during which the heater will burn at its lowest

setting, while the burner autocleans. When the burner is clean again, the heater will automatically

switch back to the highest setting again.

TURNING OFF HEATER

While heater is burning, press power switch to “OFF” position. This will extinguish heater and ON/

OFF Lamp on the indicator panel will go out.

The circulation fan motor will operate further, for approximately 90 seconds to assist in cooling

down heater.

NEVER: Turn heater off by disconnecting the heater plug from the main elecrical supply.

DO NOT: Restart your heater for at least ten minutes.

AUTOMATIC DEACTIVATION

This heater is tted with a safety system that ensures that it swiches off automatically after 69

hours continuous operation.

The following will then appear in the display: . If desired, you can switch the heater on again

by pressing the button.

ENGLISH

EMERGENCY MESSAGE

In the event that heater should extinguish itself, without any action or your part, you

should look tothe digital indicator for any of the following messages.

MESSAGE

(Digital Indicator)

MESSAGE MEANING

Temperature within the heater too high.

Power interrupted. You can re-ignite the heater.

Thermostat is broken or disconnected. Contact your dealer.

Faulty burner thermistor. Contact your dealer.

You have accidentaly activated your safety tip-over switch. You should reset

this device as described, press the “OFF”button and restart your heater.

lter

lter.

Room temperature above 32°C

Failure of blower motor.

lter dirty; or Fuel pump dirty.

The heater has been in operation continuously for a

automatically. Switch the heater back on.

(& blinking FUEL-indicator)

ll removable fuel tank.

(& blinking VENT-indicator)

Too little ventilation. Ventilate better.

ENGLISH

ROUTINE MAINTENANCE

CAUTION: Besure to unplug heater before performing any checks or cleaning.

CAUTION: Do not remove any parts from the heater except removable fuel tank, fuel acceptance

fitting and air filter.

WARNING: Allow heater tocool completely before cleaning or maintenance.

1. Clean Air Filter

Clean the air filter with a vacuum cleaner on a weekly basis.

If filter is clogged with dust or lint, smoking and improper combustion

may result.

NOTE: If filter was washed in water, dry thoroughly before replacing.

NOTE: Never wipe with cloth, it will clogfilters further.

2. Clean Fan Cover

Using a vacuum cleaner, remove any dust from the fan cover at the

back of the heater.

3. Clean Fuel Acceptance Fitting

When dirt or dust accumulates in the fuel acceptancefitting, it should

be cleaned, Check fuel acceptance fitting each time your refuel.

4. Check for fuel leaks

Make it a habit to check for signs of fuel leakage. Wipe off any spilled

fuel on the sub tank and removable fuel tank.

Spilled fuel may cause odor or risk offire.

5. Clean Louvers

Dust and stains should be wiped off louvers with a damp cloth. If dust

and stains are allowed to build up over a period of time, removal will

become difficult. Make it a point to wipe clean regularly.

ENGLISH

TROUBLESHOOTING

Should problems arise during operation or ignition, use this chart to determine the cause and the

proper steps to take. Be sure to unplug heater and allow to cool completely before taking correc-

tive measures.

PROBLEM CAUSE SOLUTION

POWER LAMP FAILS

TO TURN ON

- Disconnected power plug

- Incorrect wiring

- Circuit board malfunction

- Plug into 230V AC outlet

- Consult your dealer

NO IGNITION - Out of fuel

- Clogged air  lter

- Use of inferior kerosene (paraf-

 n)

- Incorrect wiring

- Circuit board, ignition heater or

fuel pump malfunction

- Refuel

- Clean air  lter

- Remove fuel and refuel using

fresh, clear kerosene (para n)

- Consult your dealer

ODOR - Clogged air  lter

- Spilled kerosene (para n)

- Use of inferior kerosene (paraf-

 n)

- Clean air  lter

- Wipe o any kerosene (para n)

spills from fuel sub tank, remov-

able fuel tank and drip tray

- Remove fuel and refuel using

fresh, water-clear kerosene

(para n)

EXTINGUISHED

AFTER IGNITION

- Excessive room temperature

- Oxygen shortage in room

- Tip-over switch activated

- Water in fuel acceptance  tting

- Out of fuel

- Flame sensor or fuel pump

malfunction

- High limit switch activated

- Allow room to cool

- Open doors and windows to

ventilate room thoroughly

- Reignite

- Remove fuel and refuel using

fresh, water-clear kerosene

(para n)

- Refuel

- Consult your dealer

- Clean circulation fan cover,

remove any obstructions

POOR COMBUSTION/

NOISY COMBUSTION

- Clogged air  lter

- Loose screws or incorrect as-

sembly

- Incorrect wiring

- Circuit board or fuel pump

malfunction

- Altitude too high

- Clean air  lter.

- Consult your dealer.

If the corrective measures outlined above do not solve the problem, please consult your dealer.

PROBLEM CAUSE SOLUTION

POWER LAMP FAILS

TO TURN ON

- Disconnected power plug

- Incorrect wiring

- Circuit board malfunction

- Plug into 230V AC outlet.

- Consult your dealer.

NO IGNITION - Out of fuel

- Clogged air filter

Use of inferior kerosene (paraffin)

- Incorrect wiring

- Circuit board, ignition heater or

fuel pump malfunction

- Refuel.

- Clean air filter.

Remove fuel and refuel using

fresh, clear kerosene (paraffin).

- Consult your dealer.

ODOR - Clogged air filter

- Spilled kerosene (paraffin)

Use of inferior kerosene (paraffin)

- Clean air filter.

Wipe off any kerosene (paraffin)

spills from fuel sub tank,

removable fuel tank and drip tray.

Remove fuel and refuel using fresh,

water-clear kerosene (paraffin).

POOR COMBUSTION/

NOISY COMBUSTION

(howling/ whistling

sound)

- Clogged air filter

- Insufficient ventilation

- Loose screws or incorrect

assembly

- Incorrect wiring

- Circuit board or fuel pump

malfunction

- Altitude too high

- Clean air filter.

- Open doors and windows to

ventilate room thoroughly.

- Consult your dealer.

EXTINGUISHED

AFTER IGNITION

- Excessive room temperature

- Oxygen shortage in room

- Tip-over switch activated

- Water in fuel acceptance fitting

- Out of fuel

- Flame sensor or fuel pump

malfunction

- High limit switch activated

- Allow room to cool.

- Open doors and windows to

ventilate room thoroughly.

- Reignite.

- Remove fuel and refuel using

fresh, water-clear kerosene

(paraffin).

- Refuel.

- Consult your dealer.

- Clean circulation fan cover,

remove any obstructions.

If the corrective measures outlined above do not solve the problem, please consult your dealer.

ENGLISH

LONG TERM STORAGE

At the end of the heating season, you must store the heater in a dust-free plece, if possible in its

original packaging. The following procedures are recommended.

1. Drain Fuel Tank

Remove any kerosene (parafn), dust or water remaining in the fuel sub

tank and removable fuel tank to prevent rusting.

2. Clean Heater

Wipe off any dirt or dust on heater with a damp cloth, then wipe again

using a dry cloth.

3. If your heater needs any service or repair, now is the time to call your

dealer to have it done before storage. That way, it will be ready for im-

mediate use when the next heating season begins.

4. Store Heater

The original shipping carton is the best plase to store your heater. If you

do not have the original packing materials, cover heater with a large

plastic bag and store in a dry place.

Fuel

acceptance

tting

Disposal of old Electrical & Electronic Equipment (Applicable in the European Union

and other European countries with separate collection systems).

This symbol on the product or on its packaging indicates that this product shall not be treated

as household waste. Instead it shall be handed over to the applicable collection point for the

recycling of electrical and electronic equipment. By ensuring this product is disposed of cor-

rectly, you will help prevent potential negative consequences for the environment and human

health, which could otherwise be caused by inappropriate waste handling of this product. The

recycling of materials will help to conserve natural resources. For more detailed information about recycling

of this product, please contact your local city ofce, your household waste disposal service or the shop

where you purchased the product.

Model LC-43G

Imported by G.E.DIMITRIOU S.A.

6, Kissou Av., Egaleo, P.C. 12242

Inverter Laser Clean Fan Heater

Package contains 1 piece

Product Dimension (HxWxD) mm: 437x435x315

Packing Dimension (HxWxD) mm : 480x475x355

Net / Gross Weight kg : 11,5 / 13

Country of Origin: JAPAN

Model LC-44 (Type A)

DELTA DOMESTIC APPLIANCES S.A.

ENGLISH

LONG TERM STORAGE

At the end of the heating season, you must store the heater in a dust-free plece, if possible in its

original packaging. The following procedures are recommended.

1. Drain Fuel Tank

Remove any kerosene (paraffin), dust or water remaining in the fuel sub

tank and removable fuel tank to prevent rusting.

2. Clean Heater

Wipe off any dirt or dust on heater with a damp cloth, then wipe again

using a dry cloth.

3. If your heater needs any service or repair, now is the time to call your

dealer to have it done before storage. That way, it will be ready for im-

mediate use when the next heating season begins.

4. Store Heater

The original shipping carton is the best plase to store your heater. If you

do not have the original packing materials, cover heater with a large

plastic bag and store in a dry place.

Fuel

acceptance

Fitting