6
ENGLISH
4. Do not place any object on the appliance. Allow a safe area around the appliance away from
the furniture, animals, curtains, paper, clothes, bedding or other flammable objects, at least
100 cm from the top and sides and 200 cm from the front.
5. The appliance should not be located exactly below or in front of a socket- outlet.
6. Do not use this appliance when it is lying on its side.
7. If the appliance is tipped over, unplug it and allow it to cool before putting it upright.
8. Do not use the appliance in areas where explosive materials have been stored (gasoline, paint,
thinner, etc.)
9. Warning: In order to avoid overheating, do not cover the appliance.
10. Don’t allow children to use this heater.
Safety Operation
1. This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instructions concerning use of the appliance by a person responsible for
their safety.
2. Children should be supervised to ensure that they do not play with the appliance.
3. Do not insert your fingers or other foreign objects into the air inlets or outlets because it might
cause electroshock, fire or product malfunctions.
4. Caution: Keep the power cord away from heater body in a safe distance. Fully extent the cord
before plugging in the heater. Do not run the cord underneath carpeting; do not cover it with
mats, carpet strips, or similar and make sure it is not placed in any passageways. Make sure
the cord cannot be stepped on and that no furniture is placed on top of it. Do not leave the cord
around sharp corners and do not roll it up too tightly after use.
5. Do not cover or block the air inlets or outlets because it might cause overheating.
6. Do not use the appliances in areas where explosive materials have been stored (gasoline,
paint, thinner, etc).
7. Do not use the appliance to dry clothes or to warm food.
Please check before you use the product:
1. Carefully unpack the product from the carton box.
2. Make sure electric wire is not damaged.
3. It is suggested not to use this product, in socket lower than 10A in order to avoid possible ac-
cident.
4. In order to use the product, put the plug-in first, and then turn power switch at the first level
of 1000 Watt. The indicator light will be red and the product will start its function. In order to
increase power, turn power switch to the second level of 2000 Watt.
5. In order to turn off the fan heater, turn power switch to the original position 0 and then put off
the plug.
6. If you want to move the fan heater, please turn off the power switch, put off the plug let the ap-
pliance cool down and carry it to the desired position from the handle which is located on the
upper part of back side of the fan heater.