KESNOS PD253D User manual

Home Dehumidifier
PD253D
Please read the manual carefully
before using the unit
USER MANUAL
www.kesnos.com

Thank you for purchasing our dehumidifier.
Kesnos wishes that our products and services can bring convenience to
your work and life. We highly recommend that you keep the manual for
reference if you encounter unexpected events using the unit.
Please read the manual carefully to ensure proper use of the dehumidifier.
Our dehumidifiers are widely used in family bedrooms, bathrooms, base
ments, offices and storage rooms, etc.
The dehumidifiers from provide quick and efficient operation to Kesnos
reduce room's humidity and bring you a healthy and comfortable life.
FOR CUSTOMERS
TO ACCESS CUSTOMER SUPPORT FASTER
If there is any problem of the product, please contact Kesnos Customer
Service at with your Purchase Order ID to help you [email protected]
address the problem more effectively.

To prevent any internal damage, it is very important to keep the
unit (like this one) upright throughout its journey.
Please leave it standing as the picture shown below and outside
the box for before plugging it in.24 HOURS
BEFORE FIRST USE:

Statement
The graphics and functions provided in this manual may not be the same
as the actual product. Please always refer to the actual product.
The model of the machine on the manual is for reference only, please
check the corresponding content and operate the machine based on the
actual product.
The right to interpret the relevant terms belongs to the company.
TABLE OF CONTENTS
Safety Instructions................................................................
Parts Description ..................................................................
Control Interface...................................................................
Operation Instructions...........................................................
Cleaning & Maintenance.......................................................
Troubleshooting....................................................................
Special Notes.......................................................................
Technical Parameters..............................................................
Warranty & Contact Us...........................................................
01
02
03
04
10
13
16
17
18

● Before cleaning the dehumidifier, turn off the power and unplug it from the power
outlet.
● Please do not place the machine near heat or flammable dangerous goods.
● Do not insert your fingers or sticks into the air inlet or outlet.
● Always keep the machine on even surfaces, avoid placing the machine on uneven
or sloping ground.
● Do not spray water, pesticides or liquids on the unit.
● This machine should not be placed in a confined and narrow space.
● When the power cord is damaged, it must be replaced by a technician approved
by the company.
● When using the dry clothes function, the clothes should be kept at least
15.7inches away from the air outlet to prevent water from entering the machine
and damaging the machine.
● Machine power supply wiring must be in accordance with national wiring rules,
and, the power line need to be connected with the external grounding line.
● Model Specification of Safety Tube: 3.15A
● This appliance can not be used by children aged under 8 years old and persons
with reduced physical, sensory or mental capabilities or lack of experience and
knowledge unless they have been given supervision or instructions concerning
use of the appliance in a safe way and understand
the hazards involved. Children shall not play with
the appliance. Cleaning and user maintenance
shall not be made by children without supervision.
● This dehumidifier is designed to operate in a
working environment between 41°F (5℃)
and 95°F (35℃).
● When using the dehumidifier, other objects
surrounding the machine need to be kept at
least a distance of 7.9 inches (20cm) as shown
in the picture on the right:
Safety Notes:
For your safety, please read the manual carefully and keep the manual for future
reference. Please use this product according to the instructions of installation
and operation of this manual.
SAFETY INSTRUCTIONS

Continuous
Drainage Outlet
Front Rear
PARTS DESCRIPTION

Child Lock
Press the button and hold for 2
seconds, the control panel will
be locked.
Timer Button
Press to initiate the auto-start
or auto-stop feature.
1.Control Panel
Display Area
Mode Button
Press mode button to choose
"DRY CLOTHES" function.
Dehumidify Button
Press to set up/down the
humidity value.
Lighting Button
Control the LED panel's light
on/off.
Speed Button
Control the fan speec.
Power Button
Press to turn the dehumidifier
on and off

OPERATION
INSTRUCTIONS
The humidity level can be set within a range of 30%RH to 80%RH in 5%
increments.
● When it starts to work, it will first automatically detect and show the room's
humidity.
In dehumidification mode (other modes are invalid), press the "DEHUMIDIFY"
button, you can change the humidity selection.
After no operation for 5S," " will show the actual room humidity.8 8
● When the humidity level is higher or drops to the level you have set, the
dehumidifier will automatically begin to work or stop.
● When the humidity level is set at 30%RH, the dehumidifier will be work at
continuous dehumidifying mode.
2.Setting
Setting Humidity
This TIMER setting function is designed for you to set a time to turn off
(when the machine is on) or turn on (when the machine is off) the machine,
automatically by the timer.
1. Press the "TIMER" button select the timer by 1-hour increment. You can
set the timer up to 24 hourswhich can be reset after invalid. It will start to
do the countdown when you start the timer.
2. Press and hold the "TIMER" button for several seconds to make the
timer selection faster.
3. If the time is set to 00, this is called the invalid time. If you successfully
set the timer, the timer indicator " " will light up. Press the "TIMER"
icon, the LED screen will display the remaining setting time, and return to
the current humidity after seconds.
TIMER Setting

Control the fan speed. Press to select either High or Normal fan speed.
Higher fan speed will result in quicker moisture removal. Set the speed
high for maximum moisture removal. When the humidity has been reduced
and quiet operation is more preferred, set the fan speed back to Normal.
1. In power-on status, press the "LIGHTNING" button to turn on or turn off
the backlight;
2. When the light funtion is powered on, except the "Power" button and the
"Lighting" button is on, other backlight indicators will be off.
Speed Button
Light Function Settings
LOCK(2S)
Power Off Memory Function
Overflow Protection
tank
● The device automatically restores the working state after power on.
● If the device is turned on and a power interruption occurs, after starting the
unit again, it will keep the previous parameters or settings that were set up.
● If the device is turned off and power interruption occurs, the device will still
be in a power off status when turned on.
Caution:
Water tank must be placed in right position, otherwise will cause the water
full alarm.
When the unit is turned on, press "LOCK" and hold on for 2 seconds, the
control panel will be locked together with the other buttons. To unlock the
control panel, press and hold the "LOCK" button again for 2 seconds.
When the water tank is full of water, the machine will turn off automatically.
OPERATION
INSTRUCTIONS

● When the device is currently powered on, before any operation, only the
"POWER" light will be up indicating the device is in "Standby" status.
● Timing indicator " " : If the timer is set up properly, the indicator light will
be up, flash if press TIMER button again to check and reset, and go out if
non-successful setup.
● Lighting indicator " " : If the lighting function is powered on, the light
button will be on, but other backlight indicators will be off.
● High-speed icon " ": If you set the unit to high speed fan mode, this icon
will light up.
● Low-speed icon " "：If you set the unit to low speed fan mode, this icon
will light up.
● Dehumidification indicator " ": When the machine starts to
dehumidify, this icon will light up.
● Dry clothes icon " ": When the machine is selected to work in dry
clothes mode, this icon will light up.
● Water full alarm " ": When the water tank is full, this icon will flash.
● LOCK indicator " "：this indicator will light up when the control panel is
locked successfully, otherwise it will be off.
● When the dehumidifier normally works, “ " will display the current 8 8
humidity.
3.Display Status Description
Auto Defrost Feature
Defrost Action
When the dehumidifier is running at a lower temperature, the system will
automatically determine whether there is a presence of frost. lf any frost
exists, it will defrost automatically.
The fan runs at high wind speed when the compressor stops, and the LED
screen displays the defrosting symbol.
OPERATION
INSTRUCTIONS

Note: Keep away the unit from the water drips of the washed clothes.
4.Instructions for Drying Clothes
Step 1.
Step 2.
It's the best
would be more suitable
OPERATION
INSTRUCTIONS

5. Fault & Processing Methods
OPERATION
INSTRUCTIONS

6. Empty The Water Tank
Two ways are available to remove the collected water.
Use the Water Tank
Ways to Empty the Water Tank
Pull the water tank out from the
bottom with both of your hands. ..
.Put the water tank back in place,
the water full indicator will go out.
CLEANING AND
MAINTENANCE

CLEANING AND
MAINTENANCE

7.Continuous Drainage
Remove the power supply, take out the water tank, open the drainage cap,
insert the water hose into the continuous drain drainage port and put back
the water tank. Connect the power supply to start the operation.The outlet
of the water hose should be lower than the continuous drainage port by
more than 3.9 inches, and can not be bent.(Note: The diameter of
continuous drainage port is 0.63 inches.)
Open the drainage cap
Insert the water hose into the
continuous drainage port
Continuous Drainage Outlet
CLEANING AND
MAINTENANCE

Please use a soft and a slightly wet textile or cloth to clean it.
Pull out the filter.
Clean the filter: Use a vacuum cleaner to gently remove the dust from the
surface of the filter. If the filter very dirty, clean it with warm water and
mild detergent and dry it completely.
Slowly insert the filter back into the machine body.
C-Dehumidifier storage
WARNING:
A-Cleaning the dehumidifier body
B-Cleaning filter
CLEANING AND
MAINTENANCE

Check the information below for troubleshooting steps, it will save you
time to resolve issues that may happen with the unit. The list includes
most of the common cases, but not the results of defective unit, crafts or
materials in the unit. If all troubleshooting steps have been exhausted and
the issue is still occurring, please feel free to reach out to Kesnos
Customer Service to get further assistance.
ls the Full Tank indicator
blinking? (The tank is full or
in a wrong position. )
?
This product does not apply to
over hot or cold environment,
the machine will automatically
enter the protection mode. It
is a normal phenomenon.
When running under lower
ambient temperature, the
machine will automatically
defrost, which is a normal
phenomenon. It will restart
dehumification again until the
defrosting process finished.
It is normal the compressor
ceases while defrosting
process. Wait until the
process finished, it will restart
dehumidification again.
Is the room humidity lower or
reaching the preset humidity
level?(When the room
humidity has reached the
preset level, the dehumidifier
will enter Standby Mode and
the indicator on LCD will
flash. )
Please set the humidity
decrease by 5% than the room
humidity or set the humidity to
30%.

This is to prevent the frequent
start of the machine. Does the
machine stop working just now?
The dehumidifier is designed
to work in the humidity range
of 30%-80%. Above or below
this range, it will not work.
Room temperature is too low,
or below 41℉ (5℃): The
machine will not work or
undergo poor dehumifying
efficiency in low temperature.
Please wait until the
temperature rises to above
5℃ or higher.

The dehumidifier is not
positioned levelly.
Clean up the dirt or lint on
the air outlet and intake.
Please check whether the
packing bag of the filter had
been removed and the filter
has been installed correctly.
Continuous Mode.
Do Not set the humidity too
low. Typically, 40-50% are
good for use.
Change humidity setting. Or
change to a higher capacity
dehumidifier.
The float of water tank has
been stuck.
Move the float and let it
swing freely.
The magnet on the float has
come off.
Connect the hose with the
drainage port tightly.
The water tank has not been
installed properly. Re-install the water tank
properly.
If the dehumidifier is still not working properly as expected and the
troubleshooting steps or solutions above may not resolve the issue.
Please unplug the power and shut down the dehumidifier, then contact
Kesnos Customer Service at [e-mail].

Do not insert thin rods
and hard objects into the
machine body to avoid
malfunction and danger.
When cleaning the
dehumidifier, please use the
wet textile to wipe gently, do
not shoot the water directly.
Please clean the filter every
two weeks (do not use hot
water above 104°F, alcohol,
gasoline or toluene.).
When continuous drainage,
the drainage hose must be
placed horizontally, without
unevenness and winding.
After cleaning the filter, please
do not dry it under direct
sunlight, in case deformation.
SPECIAL NOTES