KEYA TRONIC PLUS User manual

TRONIC PLUS

TRONIC PLUS
2 www.keya.cat

TRONIC PLUS
www.keya.cat 3

Multiuser mode
Open and close by 4-digit code. The code is erased every time the lock is opened, being available for
a new use.
1
Open and close by 4-digit code. The code is set for 1 user only.
2
Single User mode
To close:
To open:
To close:
The latch closes automatically after 2 seconds.
Note: the lock is provided with a metal latch holder
that allows to close the door just by pushing it.
(slam door system)
TRONIC PLUS
4 www.keya.cat
To open:

INSPECTION MODE
Introduce the 5 digit Master code and press Enter
Close the lock by pressing Enter before 30s.
The User code is not deleted.
Change the User code
3
Press Enter during 3 seconds.
Introduce Current code and press Enter.
Introduce New code and press Enter.
CURRENT code NEW code
DELETE USER CODE
Introduce Master code and press Enter.
After 30s the lock remains opened.
The user code has been deleted and a new User
code will be required to close the lock again.
press during 3 seconds
Open using Master cod: Inspection mode / Delete last User code
4
MASTER code
To open:
-30s
INSPECTION
MODE
+30s
USER
ERASED
TRONIC PLUS
www.keya.cat 5

5
Change the Master code
NEW master code
CURRENT master code
press during 3 seconds
Press Enter during 3 seconds.
Introduce Current master code and press Enter.
Introduce New master code and press Enter.
TRONIC PLUS
6 www.keya.cat

Technical specifications
Salt spray test > 96h
Working temperature -5°C < > +70°C
Latch force > 45Kgf
UV Rays > 10000h
Vibration 10 - 200 Hz 2g
Life test > 200000 cycles
Electrostatic discharge 8000 V
Battery life > 30000 cycles
Measurements
TRONIC PLUS
www.keya.cat 7
Torx T20
4 x AA(LR6)
Batteries replacement
IMPORTANT: The batteries replacement
must be done in less than 5 minutes
(otherwise the clock will loose the
programmed time)
1
2

ENG - Rev1775004