Change the User code
3
Press Enter key during 3 seconds.
Introduce Current code and press Enter.
Introduce New code and press Enter.
Open using Master code: Inspection mode / Delete User code
4
MASTER code
To open:
-30s
INSPECTION
MODE
+30s
USER
ERASED
press during 3 seconds
CURRENT Code NEW Code
ELOCK PLUS
DELETE USER CODE
Introduce Master code and press Enter.
After 30s. the lock remains opened.
The user code has been deleted and a new User
code will be required to close the lock again.
INSPECTION MODE
Introduce Master code and press Enter.
Close the lock by pressing Enter before 30s.
The User code is not deleted.
www.keya.cat 5