Keysight N443xD User manual

To instrument Port
1Prepare your required test port cables for the instrument to be
calibrated.
2Connect the included USB cable to the ECal module and the other
end of the cable to a USB port
on the analyzer.
THANK YOU
N443xD Electronic Calibration Module
Quick Start Guide
Congratulations, with this ECal module you will
achieve fast, accurate results with condence.
Please use ESD precautions when handling and operating.
keysight.com
Find a Manual • Register Your ECal
Browse Application Notes
Request Repair or Calibration
View Discussion Forums • Updates www.keysight.com/nd/ecal
To instrument Port
To instrument USB
Status light
N443xD Ref Guide N7550-90002
3Once the Status LED turns green, launch the instrument’s
calibration wizard and follow
the instructions.

This information is subject to change
without notice.
© Keysight Technologies 2012-2019
Edition 1, September 2019
www.keysight.com