Kilowatt Labs Sirius User manual

SIRIUS CAPACITOR MODULE
User Manual
Model Number: 60-12-C-5C-X-SD-X-X-X-G
Version 1.0
Release Date: November 2020
Author:
Mamoona Khalid

Sirius Capacitor Module –User Manual Model Number - 60-12-C-5C-X-SD-X-X-X-G
This manual is subject to change without notice and at the sole discretion of Kilowatt Labs, Inc.
Kilowatt Labs, Inc. | www.kilowattlabs.com
2
Introduction
The Sirius Capacitor Module (“Sirius”) is supercapacitor-based storage that uses supercapacitors as
storage cells instead of chemical cells. Kilowatt Labs’ proprietary balancing, control and charge
retention algorithms control the operation of the supercapacitor-based modules, making Sirius a safe,
efficient and effective alternative to chemical batteries wherever chemical batteries are deployed.
Legal Provisions
No part of this User Manual may be reproduced or transmitted in any form or by any means without
prior written permission from Kilowatt Labs, Inc. (“Kilowatt” or the “Company”). Specifications in this
Manual are subject to change without notice. While every attempt has been made to make the
Manual accurate and up to date, users are cautioned that product improvements may require the
Company to make changes in the specifications without advance notice. Users are encouraged to
consult the Company or its Resellers before using the Manual. Neither the Company nor its Resellers
shall be liable for any indirect, incidental, or consequential damages under any circumstances caused
by reliance on the material presented, including, but not limited to omissions, typographical errors,
arithmetical errors or listing errors in the content material. The content of this manual shall not be
modified without the written authorization of the Company.
Trademarks
All trademarks are recognized even if not explicitly identified as such. Kilowatt Labs® is a registered
trademark of the Company.

Sirius Capacitor Module –User Manual Model Number - 60-12-C-5C-X-SD-X-X-X-G
This manual is subject to change without notice and at the sole discretion of Kilowatt Labs, Inc.
Kilowatt Labs, Inc. | www.kilowattlabs.com
3
Contents
1. Safety Instructions: .........................................................................................................................4
1.1 Symbols Convention: ..............................................................................................................4
1.2 Safety Precautions: .................................................................................................................4
1.3 Modules Connection Safety Precautions:...............................................................................6
1.4 Shipping: .................................................................................................................................6
1.5 Qualified Installer:...................................................................................................................6
2. Product Introduction:......................................................................................................................7
2.1 Product Part Number:.............................................................................................................7
2.2 Product Overview: ........................................................................................................................7
2.2.1 Appearance:.............................................................................................................................7
2.2.3 Dimensions and Weight:..........................................................................................................8
2.3 Product Description: .....................................................................................................................8
3. Module Installation:........................................................................................................................9
3.1 Inspection:.....................................................................................................................................9
3.2 Safety Gear:...................................................................................................................................9
4. Electrical Installation:....................................................................................................................10
4.1 Cable Size:...................................................................................................................................10
4.2 Connecting Module to Power Supply: ........................................................................................10
4.3 Connecting Module to Load:.......................................................................................................11
4.4 Connecting Modules in Parallel: .................................................................................................12
4.5 Connecting Modules in Series:....................................................................................................13

Sirius Capacitor Module –User Manual Model Number - 60-12-C-5C-X-SD-X-X-X-G
This manual is subject to change without notice and at the sole discretion of Kilowatt Labs, Inc.
Kilowatt Labs, Inc. | www.kilowattlabs.com
4
1. Safety Instructions:
This manual contains instructions for unpacking, mounting, installation and operation of a Sirius
Module. Please read this manual carefully before operating the system and follow all warnings and
safety instructions to prevent accidents. The Sirius Module must be installed by trained personnel.
1.1 Symbols Convention:
Safety instructions and general information that appears in this manual are described below.
1.2 Safety Precautions:
The Sirius Modules are designed to provide years of trouble-free operation. Proper handling is
required to avoid damage to the Module. In particular the following precautions should be observed.
•Personal Safety:
→Always wear proper personal protective equipment (eyes protection, gloves and safety shoes).
→Always make sure charger is set as recommended.
→Always make sure chargers are disconnected while working on Modules.
Caution!
“Caution” indicates hazardous situation which, if not avoided could
result in minor or moderate injury.
Warning!
‘’Warning” indicates hazardous situation which, if not avoided could
result in major injury or death.
Danger!
‘’Danger” indicates hazardous situation which, if not avoided could
result in serious injury or death.
Note!
“Note” provides tip that are valuable for optimal operation of your
product.

Sirius Capacitor Module –User Manual Model Number - 60-12-C-5C-X-SD-X-X-X-G
This manual is subject to change without notice and at the sole discretion of Kilowatt Labs, Inc.
Kilowatt Labs, Inc. | www.kilowattlabs.com
5
•Module Safety:
→Do not subject the Module to strong impact.
→Do not crush or puncture the Module.
→Do not dispose the Module in a fire.
→Do not charge the Module when the temperature is below -30oC.
→Do not charge the Module when temperature is above 80oC.
→Do not operate the Module above the specified voltage.
→Under no circumstances charge/discharge the Module at more than 35A.
→Under no circumstance must the charging voltage exceed 13.5 Vdc for more than 60 seconds.
→Do not expose the Module to temperatures in excess of 80°C.
→Do not place the Module near a heat source, such as a fireplace.
→Do not disassemble the Module under any circumstances.
→Do not touch the Module with wet hands.
→Do not expose the Module to moisture or liquids.
→Keep the Module away from children and animals.
→Ensure precautions to prevent short-circuit under all circumstances.
→Do not connect or disconnect terminals from the Module without first disconnecting the load.
→Do not touch the terminals with conductors while the Module is charged. Serious burns, shock, or
material fusing may occur.
→Protect surrounding electrical components from incidental contact.
→When connecting to external devices ensure that galvanic isolation does not exceed 1000V.
→Do not use the Module in an open environment, or in a place exposed to water and other liquids
(e.g. rain)
→Do not subject the Module to high pressure.
→It is not recommended to stack more than 3 Modules.
→Do not step on the Module.
→Do not drop the Module. Internal damage may occur that will not be visible.

Sirius Capacitor Module –User Manual Model Number - 60-12-C-5C-X-SD-X-X-X-G
This manual is subject to change without notice and at the sole discretion of Kilowatt Labs, Inc.
Kilowatt Labs, Inc. | www.kilowattlabs.com
6
→Do not stack Modules once they have been removed from the packaging, instead the Modules
should be placed on shelving.
→In case the Module is physically damaged due to any event, do not install and energize the Module
under any circumstances and immediately contact your Reseller.
1.3 Modules Connection Safety Precautions:
→All Modules must be at 100% SOC before connecting in series or in parallel.
→The maximum number of Modules that can be connected in series is six (6).
→Do not connect more than six (6) Modules in series.
→Modules cannot be connected in series-parallel combination under any circumstances.
1.4 Shipping:
Sirius Capacitor Modules are shipped out via Air and Sea.
•If the Modules are shipped via Air, please follow the instructions given below:
•Carefully remove the nails from all the four sides of the wooden box and open it.
•Remove the foam and shrink wrap and open the carton box and lift the Module manually.
•If the Modules are shipped via Sea, please follow the instructions below:
•Carefully remove the Module from the pallets after cutting the packing strips that holds the
Modules to the shipping pallets.
•Open the carton box and lift the Module manually.
1.5 Qualified Installer:
Selling and installation of this Module is only through the Company’s Resellers who are trained on
installation, operation and maintenance of the Sirius Modules.
Note!
If you want to connect more than six (6) Modules in series, please contact your
Reseller.

Sirius Capacitor Module –User Manual Model Number - 60-12-C-5C-X-SD-X-X-X-G
This manual is subject to change without notice and at the sole discretion of Kilowatt Labs, Inc.
Kilowatt Labs, Inc. | www.kilowattlabs.com
7
2. Product Introduction:
2.1 Product Part Number:
1) Capacity of Module in Wh
2) Nominal Voltage of the Module
3) Terminals are on the Top Side
4) Maximum Charge Rate of the Module
5) Not Available
6) With Safety
7) Not Available
8) Not Available
9) Not Available
10) General Module
2.2 Product Overview:
2.2.1 Appearance:
The appearance of the Sirius Module is shown below:

Sirius Capacitor Module –User Manual Model Number - 60-12-C-5C-X-SD-X-X-X-G
This manual is subject to change without notice and at the sole discretion of Kilowatt Labs, Inc.
Kilowatt Labs, Inc. | www.kilowattlabs.com
8
2.2.3 Dimensions and Weight:
Width
313 mm
Depth
183 mm
Height
204 mm
Weight
11 kg
2.3 Product Description:
•LED –Red LED indicator will be turned ON when the power supply reaches 13.5V while charging
the Sirius Module. It will turn OFF automatically when the terminal voltage is lower than 13.5V.
LED indicates constant voltage state during charging and not on a full charge state.
•Positive and Negative Terminals - F2 (Faston tab 250) terminals are used to connect power supply
or load to Sirius Module for charging and discharging operation.

Sirius Capacitor Module –User Manual Model Number - 60-12-C-5C-X-SD-X-X-X-G
This manual is subject to change without notice and at the sole discretion of Kilowatt Labs, Inc.
Kilowatt Labs, Inc. | www.kilowattlabs.com
9
3. Module Installation:
3.1 Inspection:
Inspect the shipping carton for visible damage including cracks, dents, deformation and other visible
abnormalities prior to unpacking the Module. Document (e.g., photo/photos) any damage and report
this to your Reseller as well as to the shipping agent immediately. Remove the Module from the
shipping carton and retain the shipping materials until the unit has been inspected and is determined
to be operational.
3.2 Safety Gear:
Installation must strictly follow the national safety regulations in compliance with the enclosure,
installation, creepage, clearance, casualty, markings and segregation requirements of the end-use
application. Installation must be performed by professional installers only. Switch OFF the system and
check for hazardous voltages before altering any connection! Sirius Modules must be handled only by
qualified and trained personnel. Installation should not exert bending or twisting torque to the Module
enclosure.
Note!
Read the safety instruction section before installation.

Sirius Capacitor Module –User Manual Model Number - 60-12-C-5C-X-SD-X-X-X-G
This manual is subject to change without notice and at the sole discretion of Kilowatt Labs, Inc.
Kilowatt Labs, Inc. | www.kilowattlabs.com
10
4. Electrical Installation:
4.1 Cable Size:
We recommend a cable size of 10mm2thick and 1m length to hold current up to 25A. Please use thick
cable size for lengths longer than 1m.
4.2 Connecting Module to Power Supply:
1. Connect the positive and negative terminals of the 12V charger to the positive and negative
terminals of the Sirius Module respectively.
2. Set the Charger Voltage to 13.5V (if variable).
3. Turn ON thecharger.

Sirius Capacitor Module –User Manual Model Number - 60-12-C-5C-X-SD-X-X-X-G
This manual is subject to change without notice and at the sole discretion of Kilowatt Labs, Inc.
Kilowatt Labs, Inc. | www.kilowattlabs.com
11
4.3 Connecting Module to Load:
•Connect the positive and negative terminals of the 12V discharger to the positive and negative
terminals of the Sirius Module respectively.
•Turn ON thedischarger.

Sirius Capacitor Module –User Manual Model Number - 60-12-C-5C-X-SD-X-X-X-G
This manual is subject to change without notice and at the sole discretion of Kilowatt Labs, Inc.
Kilowatt Labs, Inc. | www.kilowattlabs.com
12
4.4 Connecting Modules in Parallel:
Any number of Modules can be connected in parallel.
•Steps to Connect Modules in Parallel:
Refer to the parallel combination of the Sirius Modules as shown below and make your connection
accordingly.
•Connect the positive (+) terminal of all the Modules.
•Connect the negative (-) terminal of all the Modules.
•Take out the output positive terminal and output negative terminal from the respective common
point.
Note!
Make sure that all cables are of the same length and diameter.
Note!
Modules cannot be connected in series parallel combination under any
circumstance.
Caution!
Charge all the Modules to 100% SOC or same voltage level before connecting
them in parallel.

Sirius Capacitor Module –User Manual Model Number - 60-12-C-5C-X-SD-X-X-X-G
This manual is subject to change without notice and at the sole discretion of Kilowatt Labs, Inc.
Kilowatt Labs, Inc. | www.kilowattlabs.com
13
4.5 Connecting Modules in Series:
A maximum of six (6) Modules can be connected in series.
•Steps to Connect Modules in Series:
Refer to the series combination of the Sirius Modules as shown below and make your connection
accordingly.
•Connect the positive (+) terminal of the first Module with the negative (-) terminal of the next
Module.
•Take the output negative from first Module and output positive from the last Module.
Note!
Use 15A slow blow fuse while connecting Modules in series.
Note!
Modules cannot be connected in series parallel combination under any
circumstances.