KINGSONG KS-C1 User manual

KS-C1
User
Manual

Cautions
Thanks for choosing KS-C1!
The scooter is especially designed for smooth and safe riding. It
combines the power electricity and the style of a traditional
scooter. enjoy an effortless gliding experience on this cool,
ultra-lightwheight, and easy to fold scooter.
Before you start, make sure the ride meets the age, height and
weight requirements below.
KS-C1
6-12 years
≤ 40kg
120-140cm

WARNNING
To reduce the risk of injury, adult supervision is required.
Never use in roadways, near motor vehicles, on or near steep
inclines or steps, swimming pools or other bodies of water; always
wear shoes, and never allow more than 1 rider.

Contents
1. Device and accessories-------------------------------------------------01
2. Button usage---------------------------------------------------------------04
3. Assembly and set-up-----------------------------------------------------05
4. Pre-ride checklist----------------------------------------------------------06
5. Learn to ride----------------------------------------------------------------07
6. Warnings and cautions---------------------------------------------------11
7. Folding and unfolding----------------------------------------------------13
8. Battery-----------------------------------------------------------------------13
9. Clean and Maintenance-------------------------------------------------15
10. Warranty-------------------------------------------------------------------16

1. The Device & Accessories
1.1 Diagram: KS-C1
Accessories
-----------------------------------------------------------------------------------
Hex Wrench Charging Adapter User manual
01

1.2 Functions
Bell
Folding hook
Brake handle
Folding
mechanism
Fender
Motor
Power button
Charging port
Stand
Speed lever
02

1.3 Specifications
Model No
Size
Top Speed
Mileage
Gradeability
Battery Capacity
Running Condition
Storage Condition
Max Load
Charger
Charging Time
Motor
Port
Parking Mode
Reminder
KS-C1
Front 7inch Tyre+Rear 5.5inch Tyre
12 km/h
Around 10km
Around 8°
25.9V, 2.5Ah
-10℃/+45℃; 0-75% Humidity
-20℃/+50℃; 0-75% Humidity
40kg
Input: 100-240V;
Output: 29.4V/0.8A(EU);29.4V/0.6A(UK)
Around 3-4hrs.
150W
Charge Port *1
Kick-stand
Mechanical Bell
03

User Height
Accelerator
Brake
Dimension(Unfold)
Dimension(Folded)
Net Weight
Packing List(pcs)
120-140cm
Throttle Button
E-ABS + Mechanical Brake
830*370*910mm
910*370*310mm
8kg
User Manual*1, Certificate*1, Charger*1,
Hex Wrench*1
2. Button Usage
• Power ON/OFF: Long press the button for 3 seconds.
• Under the boot state, press the power button for two times to
switch the scooter power induction mode riding.
04

3. Assembly and Set-up
1. Slightly loosen the bolts on
the collar clamp.
2. Slide the stem in to the
marked length.
3. Park with the kickstand. Step
on the footboard, hold the
handlebar and push forward
to unfold the scooter.
4. Tighten the bolts on the collar
clamp. Rotate the accelarator
upward to proper position.
CLICK
05

4. Pre-ride Checklist
• Make sure there are no loose fasteners and damaged
components. Check all functional parts like the frame,
handlebar, tires and make sure the steering system is well
adjusted. Ensure that all locking devices are engaged.
• Check the brake for proper function. When you squeeze the
brake lever or stamp on the fender brake, there should be
positive braking action.
• Battery: if the battery level is low (The buzzer sounds five
times.), please fullycharge the battery to ensure normal
riding. Always wear a helmet and protective equipment like
knee pads and elbow pads. Always wear shoes and proper
outfit.
• (sports shoes and clothes are recommended). Never ride
barefoot or in sandals.Long hair should be tied back to
prevent it from blocking your vision.
• Do not attempt your first ride in any area where you might
encounter children,pedestrians, pets, vehicles, bicycles, or
other obstacles and potential hazards.
• Check and obey local traffic laws and regulations for
scooters.
06

5. Learn to Ride
WARNING
Always wear a helmet and other protective gear to minimize any
possible injury in the learning process.
To reduce the risk of risk of injury, adult supervision is required.
07

1. Turn on the scooter. If the
buzzer sounds five times,
please charge immediately.
2. Hold the handlebar firmly with
both hands. Place one foot on the
footboard and start kicking
with the other foot.
3. When the scooter start
cruising, place both feet on the
footboard and keep your
balance.
08

How to decelerate
How to accelerate
squeeze the brake
lever and/or step on
the fender brake
kick to go
Cruise mode
release the throttle, squeeze the brake
lever and/or step on the fender brake
press the throttle lightly
Turbo mode
4. Accelerate and Decelerate
Accelerate
Cruise mode
NOTE: The maximum
speed is 10km/h within
1 km mileage.
Turbo mode
NOTE: The motor
will not engage
before the speed
reaches 3 km/h.
WARNING
Stay alert and avoid abrupt acceleation or deceleration. Otherwise you risk serous
injury due to imbalance, loss of traction and falls. DO NOT perform stunts of any
kind. Both tires must remain on the ground at all times.
09

Decelerate
Cruise mode Turbo mode / Safe mode
5. To turn, shift your body and
turn the handlebar slightly.
6. When the scooter has stopped
cruising, step off one foot at a time.
Be extra cautious when dismount-
ing for the first time.
10

6. Warnings and Cautions
● DO NOT ride on public roads,
motorways, or highways.
● DOT NOT ride through bumpy
roads or road bumps.
● DO NOT press the throttle
when walking along with
the scooter
● DOT NOT ride the scooter with
only one foot.
11

● DO NOT take your hands off
the handlebar while riding.
● DOT NOT rotate the handlebar
abruptly or violently when riding.
● DO NOT ride in the rain. ● To avoid pinching, DO NOT
touch parts with gap.
12

7. Folding and Unfolding
8. Battery
8.1 Temperature Effect on Battery
Battery power will vary with the temperature, mileage per
charge will have slight difference under different
temperature, and following table is just for your reference.
Make sure that the scooter's turned off. To fold, unlock the
folding mechanism, and bend the handlebar stem to hook the
hanging hole on the fender. To open, remove the hook from
the hanging hole on the fender, erect the handlebar and lock
the folding structure.
13

8.2 Charging
The device has a built-in lithium battery, no extra battery
installation is required, just charge the device when it
indicateslow battery.
Plug in the power source after inserting the charger plug,
thiscan prevent potential risk to ensure a safer charger.
It takes around 4hrs to get 100% charged, when the red
lights turn into green, indicating the charging is completed.
If not in urgent need, please wait until charging complete
before unplugging, for after charging, the protection circuit
will perform flow equilibrium.
50
110%
40
105%
30
100%
20
95%
10
90%
0
80%
-10
60%
-20
40%
Temperature(℃)
Range
14

9. Clean and Maintenance
9.1 Charging
When charging
• Please place the E-scooter in cool and ventilate places to
release heat.
• Please avoid high temperature or moist.
• Please avoid water into the E-scooter to prevent electric
shock, especially water drops from the charger cable to the
the charging port.
When cleaning
• Please make sure the E-scooter is off.
• Please use soft cloth to clean the E-scooter.
• Please don’t use water to wash the E-scooter or place
E-scooter in water.
When storage
• Please place the E-scooter in cool and ventilate places
(temperature -10~60℃, relative humidity 0~90%).
• Please don’t place subjects on the E-scooter or heavy
subjects to squeeze the E-scooter.
15