(3) Sending a radio kill or revive
By the key programmed as “Radio kill/Radio revive”: *
a)Press the navigation keys , or rotate the knob to
select the target contact, and press to select.
b)The target ID/alias displays on the LCD, indicating that
the radio kill/revive order is sending out, and the RED
LED indicator lights on.
c)Wait for the response.
d)If the response is received, the LCD displays “Radio
Kill Successful”, or otherwise displays “Radio Kill
Failed”.
By menu operation:
In standby screen, press [Contacts] key to come to step
c), or
a)Press to enter the menu;
b)Press , or rotate the knob to select “ contacts”,
and press to select.
c)Press , or rotate the knob to select “Contacts List”,
and press to select. Then press , or rotate the knob
to select the target private call contact, press to select.
Or
Press , or rotate the knob to select “Manual Dial”, and
press to select. Input the target ID with the keyboard,
keys to neglect the call alert.
Sending a call alert
By pressing the programmed “Call Alert” key: *
a)Press the navigation keys , or rotate the knob to
select the target contact, and press to select.
b)The target ID/alias displays on the LCD, indicating that
the call alert is sending out, and the RED LED indicator
lights on.
c)Wait for the response.
d)If the response is received, the LCD displays “Call
Alert Successful”, or otherwise displays “Call Alert
Failed”.
By menu operation:
In standby screen, press [Contacts] key to come to step
c), or
a)Press to enter the menu;
b)Press , or rotate the knob to select “ contacts”,
and press to select.
c)Press , or rotate the knob to select “Contacts List”,
and press to select. And press , or rotate the knob
to select the target private call contact, press to select.
Or
(2)
13 14
Press , or rotate the knob to select “Manual Dial”, and
press to select. Input the target ID with the keyboard,
and press to select.
d)Press , or rotate the knob to select “Call Alert”, and
press to select.
e)The target ID/alias displays on the LCD, indicating that
the call alert is sending out, and the RED LED indicator
lights on.
f)Wait for the response.
g)If the response is received, the LCD displays “Call
Alert Successful”, or otherwise displays “Call Alert
Failed”.
Note:
During when the “Call Alert” order is sent out and the
radio is waiting for the response, press , the radio will
terminate the order and exit “Call Alert” mode.
Or
If the time to wait for the response is over, the radio will
automatically exit this mode and displays “Call Alert
Failed”.
Radio Kill/Revive
This function allows one radio sending the signaling to
kill another radio. The radio to be killed cannot display
◆
anything, make or receive calls. The radio can only
revive through CPS or the administrator radio sends a
revive order. After revived, the radio can work normally
again. This function is used to manage the unauthorized
usage of the radio, prevent misappropriating the radio
which is lost.
(1) Receiving a radio kill
When receive radio kill order and “Radio kill/decoding
enabled”, the radio will automatically reply ACK
(Successful), or otherwise reply ACK (Failed).
The radio returns to the standby screen, the channel
alias, group alias and “Status of kill” display on the
screen. The killed radio will not receive any information
except the revive order and neglect all the keyboard
input except ON/OFF key operation.
(2) Receiving a radio revive
When “Radio kill/decoding enabled” and the killed radio
receives the revive order, the radio automatically replies
ACK (Successful), or otherwise replay ACK (Failed).
The radio returns to the standby screen. Channel alias
and group alias display on the LCD.
