KitchenAid KSB1575 User manual

KSB1575
3KSB1575
INSTRUCTIONS
使用說明
W10847968A_EN_v06.indd 1 1/13/16 4:41 PM

CMD + SHIFT CLICK TO CHANGE COPY
2
BLENDER SAFETY
BLENDER INSTRUCTIONS
BLENDER SAFETY
Important safeguards.......................................................................................... 3
Electrical requirements ...................................................................................... 4
PARTS AND FEATURES........................................................................................ 5
ASSEMBLING THE BLENDER
Preparing the Blender for use ............................................................................ 6
OPERATING THE BLENDER
Using the Blender............................................................................................... 8
Crushing ice........................................................................................................ 9
Using PULSE mode .......................................................................................... 10
Using the blender pitcher ingredient cup, and Soft Start blending feature ...... 11
Speed control guide.......................................................................................... 11
TIPS FOR GREAT RESULTS
Quick tips ......................................................................................................... 12
How to... .......................................................................................................... 12
CARE AND CLEANING
Cleaning the Blender ........................................................................................ 13
TROUBLESHOOTING
Blender does not operate when a setting is selected....................................... 14
Blender stops while blending............................................................................ 14
TABLE OF CONTENTS
W10847968A_EN_v06.indd 2 1/13/16 4:41 PM

CMD + SHIFT CLICK TO CHANGE COPY
English
3
BLENDER SAFETY
BLENDER INSTRUCTIONS
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions
should always be followed, including the following:
1. Read all instructions.
2. To protect against risk of electrical shock, do not put
Blender in water or other liquid.
3. This appliance can be used by children aged from 8 years
and above and persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge if
they have been given supervision or instruction concerning
use of the appliance in a safe way and understand hazards
involved. Children shall not play with the appliance.
Cleaning and user maintenance shall not be made by
children without supervision.
4. Unplug from outlet when not in use, before putting on or
taking off parts, and before cleaning.
5. Avoid contact with moving parts.
6. Do not operate the Blender with a damaged cord or plug
or after appliance malfunctions, or is dropped or damaged
in any manner. Return appliance to the nearest Authorised
Service Centre for examination, repair or electrical or
mechanical adjustment.
7. Do not use outdoors.
8. Do not let cord hang over edge of table or counter.
W10847968A_EN_v06.indd 3 1/13/16 4:41 PM

CMD + SHIFT CLICK TO CHANGE COPY
4
BLENDER SAFETY
9. Keep hands and utensils out of container while blending to
reduce the risk of severe injury to persons or damage to
the Blender. A scraper may be used but must be used
only when the Blender is not running.
10. Blades are sharp. Handle carefully.
11. Always operate Blender with cover in place.
12. The use of attachments not recommended by KitchenAid
may cause a risk of injury to persons.
13. Always operate Blender with cover securely in place.
14. When blending hot foods or liquids, do not ll the Blender
pitcher to the top (max. 1.25L). Secure the lid.
15. Flashing light indicates ready to operate — avoid any
contact with blades or movable parts.
SAVE THESE INSTRUCTIONS
This product is designed for household use only.
Electrical requirements
PARTS AND FEATURES
Voltage: 110 Volts A.C. only
Frequency: 60 Hz
NOTE: If the plug does not fit in the outlet,
contact a qualified electrician. Do not modify
the plug in any way. Do not use an adapter.
Do not use an extension cord. If the power
supply cord is too short, have a qualified
electrician or serviceman install an outlet
near the appliance.
W10847968A_EN_v06.indd 4 1/13/16 4:41 PM

CMD + SHIFT CLICK TO CHANGE COPY
English
5
BLENDER SAFETY
PARTS AND FEATURES
BPA-free
pitcher
Speed selection
buttons
Die-cast
metal base
Clean Touch
control pad
Stainless
steel blade
Lid with
ingredient cup
W10847968A_EN_v06.indd 5 1/13/16 4:41 PM

6
ASSEMBLING THE BLENDER
ASSEMBLING THE BLENDER
Preparing the Blender for use
Before First Use
Before using your Blender for the first time,
wipe blender base with a warm damp cloth,
then wipe clean with a damp cloth. Dry with
a soft cloth. Wash pitcher, lid, and ingredient
cup in warm, sudsy water (see “Care and
Cleaning” section). Rinse parts and wipe dry.
1Align the pitcher tabs with the slots on
the base. The pitcher handle may be on
the right or left side of the blender base.
Ta b
Slot
2Rotate pitcher clockwise, approximately
1/8 turn until pitcher clicks into place. 3Adjust the length of the blender power
cord.
4Put lid on pitcher.
NOTE: When properly positioned, pitcher
will rest completely on blender base. If not,
repeat steps 1 and 2.
W10847968A_EN_v06.indd 6 1/13/16 4:41 PM

English
7
ASSEMBLING THE BLENDER
ASSEMBLING THE BLENDER
6Before removing the pitcher from
the base, always press POWER to
stop the flashing lights and unplug
the power cord.
5Before using the Blender, plug into
a grounded outlet, and press POWER.
The Power indicator light will flash
when ready.
W10847968A_EN_v06.indd 7 1/13/16 4:41 PM

8
OPERATING THE BLENDER
OPERATING THE BLENDER
Using the Blender
2Press POWER. The Power indicator
light will flash when ready. Then press
desired speed button for continuous
operation at that speed. The white
indicator light by the selected speed
will stay lit. You may change settings
without stopping by pressing a new
speed button.
1Put ingredients in pitcher and firmly
place lid.
3When finished, press POWER to turn
off. Unplug Blender before removing
the pitcher.
Before Use
While the blender Power indicator light or
the Pulse mode indicator light is blinking:
- Do not interfere with blade movement.
- Do not remove pitcher lid.
Before operating the Blender, make sure
the pitcher is properly locked onto the
blender base.
NOTE: The Blender will operate only
when pressing the POWER button (Power
LED will flash) before selecting the desired
speed.
IMPORTANT: If blending hot foods or liquids, do not fill to the top of the pitcher,
and operate only on STIR speed. Remove center cap and place towel over lid.
The Blender has five speeds: Stir, Chop,
Mix, Puree, and Liquify. It also features
Crush Ice and Pulse modes.
W10847968A_EN_v06.indd 8 1/13/16 4:41 PM

English
9
OPERATING THE BLENDER
OPERATING THE BLENDER
Crushing ice
4When the timed function is finished,
Blender will stop. Press POWER to
turn off. Unplug Blender before
removing the pitcher.
1Before operating the Blender, make sure
the pitcher is properly positioned on
the base.
2Put ingredients into the pitcher and
firmly place lid. Use up to 1/2 tray
of cubed ice.
3Press POWER, then press CRUSH ICE.
The indicator light will stay lit.
Your Blender offers a Crush Ice feature. When selected, the Blender will automatically
pulse for 30 seconds at staggered intervals at the optimal speed for crushing ice or other
ingredients.
W10847968A_EN_v06.indd 9 1/13/16 4:41 PM

CMD + SHIFT CLICK TO CHANGE COPY
10
OPERATING THE BLENDER
OPERATING THE BLENDER
3Press POWER, then press PULSE.
The indicator lights above the Pulse
button and all five speeds will blink
to indicate that all five speeds are in
the Pulse mode.
4Press and hold a speed button for the
desired length of time. Both the speed
button and Pulse mode indicators will
stay lit when pulsing. Blending will stop
when Pulse button is released and the
Pulse indicator will resume blinking. To
pulse again at another speed, just press
and hold the desired speed button.
5When finished, press POWER to turn
off. Unplug Blender before removing
the pitcher.
Using PULSE mode
1Before operating the Blender, make sure
the pitcher is properly positioned on
the base.
NOTE: Pulse mode will not work with the
Crush Ice feature.
Your Blender offers a PULSE mode, which allows a “Pulse-at-any-speed” feature.
2Put ingredients into the pitcher and
firmly place lid.
W10847968A_EN_v06.indd 10 1/13/16 4:41 PM