KitchenAid 5KSM3311 User manual

5KSM3311
W10747072E.indb 1 1/15/2019 5:56:04 PM

W10747072E.indb 2 1/15/2019 5:56:04 PM

ENGLISH
| 3
English ....................................................................... 5
Deutsch.................................................................... 21
Français.................................................................... 37
Italiano ..................................................................... 53
Nederlands.............................................................. 69
Español .................................................................... 85
Português .............................................................. 101
Ελληνικά ................................................................. 117
Svenska.................................................................. 133
Norsk ..................................................................... 149
Suomi ..................................................................... 165
Dansk ..................................................................... 181
Íslenska .................................................................. 197
Русский .................................................................. 213
Polski...................................................................... 229
Český ...................................................................... 245
Türkçe .................................................................... 261
........................................................................ 1
W10747072E.indb 3 1/15/2019 5:56:04 PM

W10747072E.indb 4 1/15/2019 5:56:04 PM

ENGLISH
| 5
TABLE OF CONTENTS
PARTS AND FEATURES�����������������������������������������������������������������������������������6
STAND MIXER SAFETY �����������������������������������������������������������������������������������7
Important safeguards .....................................................................................7
Electrical requirements .................................................................................10
Electrical equipment waste disposal ............................................................11
USING THE STAND MIXER����������������������������������������������������������������������������11
Choosing the right accessory .......................................................................11
Speed control guide.....................................................................................12
Assembling the STAND MIXER ....................................................................13
Operating the STAND MIXER ......................................................................15
Disassembling the STAND MIXER................................................................16
Optional attachments...................................................................................17
CARE AND CLEANING ���������������������������������������������������������������������������������18
Cleaning the STAND MIXER.........................................................................18
TROUBLESHOOTING������������������������������������������������������������������������������������19
WARRANTY AND SERVICE���������������������������������������������������������������������������20
W10747072E.indb 5 1/15/2019 5:56:04 PM

6 | PARTS AND FEATURES
PARTS AND FEATURES
PARTS AND ACCESSORIES
Pouring shield*
Flex Edge
beater*
Wire whip
Dough hook
Speed control
*Accessory sold separately
Motor head
Attachment hub
Beater shaft
Flat
beater
Bowl
W10747072E.indb 6 1/15/2019 5:56:04 PM

ENGLISH
STAND MIXER SAFETY | 7
Flat
beater
Bowl
STAND MIXER SAFETY
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety
precautions should always be followed, including the
following:
1. Read all instructions. Misuse of appliance may result in
personal injury.
2. To protect against risk of electrical shock, do not put
Stand Mixer in water or other liquid.
3. This appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a
person responsible for their safety.
4. European Union Only: This appliance shall not be used
by children. Keep the appliance and its cord out of
reach of children.
W10747072E.indb 7 1/15/2019 5:56:05 PM

8 | STAND MIXER SAFETY
STAND MIXER SAFETY
5. European Union Only: Appliances can be used by
persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge
if they have been given supervision or instruction
concerning use of the appliance in a safe way and
understand the hazards involved. Children shall not
play with the appliance.
6. Children should be supervised to ensure they do not
play with the appliance.
7. Avoid contacting moving parts. Keep hands, hair, and
clothing, as well as spatulas and other utensils, away
from beater during operation to reduce the risk of
injury to persons and/or damage to the Stand Mixer.
8. Turn the appliance OFF, then unplug from the outlet
when not in use, before assembling or disassembling
parts and before cleaning. To unplug, grasp the plug
and pull from the outlet. Never pull from the power
cord.
9. Do not operate any appliance with a damaged cord
or plug or after the appliance malfunctions or has
been damaged in any manner. Return appliance to the
nearest Authorised Service Centre for examination,
repair, or adjustment.
10. If the supply cord is damaged, it must be replaced by
the manufacturer, its service agent or similarly qualied
persons in order to avoid a hazard.
11. Do not let cord hang over edge of table or counter.
12. Remove the at beater, wire whip, or spiral dough
hook from the Stand Mixer before washing.
13. Do not use the Stand Mixer outdoors.
14. Never leave the appliance unattended while it is in
operation.
15. The use of attachments not recommended or sold by
KitchenAid may cause re, electric shock, or injury.
W10747072E.indb 8 1/15/2019 5:56:05 PM

ENGLISH
STAND MIXER SAFETY | 9
STAND MIXER SAFETY
16. Refer to the “Care and Cleaning” section for
instructions on cleaning the surfaces in contact with
food.
17. This appliance is intended to be used in household and
similar applications such as:
- staff kitchen areas in shops, ofces, or other working
environments;
- farmhouses;
- by clients in hotels, motels, and other residential
type environments;
- bed and breakfast type environments.
SAVE THESE INSTRUCTIONS
W10747072E.indb 9 1/15/2019 5:56:05 PM

10 | STAND MIXER SAFETY
STAND MIXER SAFETY
ELECTRICAL REQUIREMENTS
Voltage: 220-240 V
Frequency: 50-60 Hz
Wattage: 250 Watts
NOTE: The power rating for your
Stand Mixer is printed on the serial plate.
Do not use an extension cord. If the
power supply cord is too short, have
a qualified electrician or service technician
install an outlet near the appliance.
The maximum rating is based on the
attachment that draws the greatest
load (power). Other recommended
attachments may draw significantly
less power.
Electrical Shock Hazard
Plug into an earthed outlet.
Do not remove earth prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these
instructions can result in
death, fire, or electrical shock.
W10747072E.indb 10 1/15/2019 5:56:05 PM

ENGLISH
USING THE STAND MIXER | 11
USING THE STAND MIXER
CHOOSING THE RIGHT ACCESSORY
ACCESSORY USE TO MIX: DESCRIPTION:
FLAT BEATER
FLEX EDGE BEATER*
Normal
to heavy
mixtures
Cakes, creamed frostings, candies,
cookies, biscuits, pie pastry, meatloaf,
mashed potatoes
WIRE WHIP Mixtures
that need air
incorporated
Eggs, egg whites, heavy cream,
boiled frostings, sponge cakes,
mayonnaise, some candies
DOUGH HOOK Mixing and
kneading yeast
doughs Breads, rolls, pizza dough, buns
*Accessory sold separately
STAND MIXER SAFETY
ELECTRICAL EQUIPMENT WASTE DISPOSAL
Disposal of packing material
The packing material is 100% recyclable
and is marked with the recycle symbol
. The various parts of the packing
must therefore be disposed of
responsibly and in full compliance
with local authority regulations
governing waste disposal.
Scrapping the product
- This appliance is marked in compliance
with European Directive 2012/19/EU,
Waste Electrical and Electronic
Equipment (WEEE).
- By ensuring this product is disposed
of correctly, you will help prevent
potential negative consequences for
the environment and human health,
which could otherwise be caused by
inappropriate waste handling of this
product.
- The symbol on the product or
on the accompanying documentation
indicates that it should not be treated
as domestic waste but must be taken
to an appropriate collection centre
for the recycling of electrical and
electronic equipment.
For more detailed information about
treatment, recovery and recycling of this
product, please contact your local city
office, your household waste disposal
service or the shop where you purchased
the product.
W10747072E.indb 11 1/15/2019 5:56:06 PM

12 | USING THE STAND MIXER
USING THE STAND MIXER
SPEED CONTROL GUIDE
All speeds have the Soft Start feature which automatically starts the Stand Mixer
at a lower speed to help avoid ingredient splash-out and “flour puff” at start-up,
then quickly increases to the selected speed for optimal performance.
NOTE: The speed control can be set between the speeds listed in the chart to obtain
speeds 1, 3, 5, 7, and 9 if a finer adjustment is required. Do not exceed Speed 2 when
preparing yeast doughs as this may cause damage to the Stand Mixer.
SPEED ACCESSORY ACTION: DESCRIPTION:
1/2
STIR
For starting all mixing procedures, slow
stirring, combining, and mashing. Use to
add flour and dry ingredients to batter,
and to add liquids to dry ingredients.
Do not use Speed 1 to mix or knead
yeast doughs.
1
2SLOW MIXING
For slow mixing, mashing, and faster
stirring. Use to mix and knead yeast
doughs, heavy batters, and candies;
start mashing potatoes or other
vegetables; cut shortening into flour;
mix thin or splashy batters.
4MIXING,
BEATING
For mixing semi-heavy batters, such
as cookies. Use to combine sugar and
shortening, and to add sugar to egg
whites for meringues. Medium speed
for cake mixes.
6BEATING,
CREAMING
For medium-fast beating (creaming),
or whipping. Use to finish mixing cake,
doughnut, and other batters. High
speed for cake mixes.
8FAST BEATING,
WHIPPING For whipping cream, egg whites,
and boiled frostings.
10 FAST WHIPPING For whipping small amounts of cream,
or egg whites; for final whipping of
mashed potatoes.
NOTE: To move the speed control lever with ease, lift slightly up as you move it across
the settings in either direction.
W10747072E.indb 12 1/15/2019 5:56:06 PM

ENGLISH
USING THE STAND MIXER | 13
USING THE STAND MIXER
ASSEMBLING THE STAND MIXER
1Check to be sure that the Stand
Mixer is unplugged, and the speed
control is turned to “0”. 2
Raise the motor head: Slide the
locking lever to the unlock position
and lift the motor head. Once lifted,
slide the locking lever to the lock
position to keep the motor head up.
3
Attach the bowl: Place the bowl on
the bowl clamping plate and gently
turn it in a clockwise direction to
lock it into place.
4
Attach any accessory: Slip the
accessory onto the beater shaft and
press upward as far as possible. Turn
the accessory counterclockwise to
hook the accessory over the pin on
the shaft.
NOTE: To move the speed control lever
with ease, lift slightly up as you move it
across the settings in either direction.
W10747072E.indb 13 1/15/2019 5:56:06 PM

14 | USING THE STAND MIXER
USING THE STAND MIXER
IMPORTANT: Your Stand Mixer is adjusted at the factory so that the flat beater just
clears the bottom of the bowl. If, for any reason, the flat beater hits the bottom of
the bowl or is too far away from the bowl, you can easily correct the clearance.
NOTE: When properly adjusted, the flat beater will not strike on the bottom or sides
of the bowl. If the flat beater or the wire whip is so close that it strikes the bottom of
the bowl, coating may wear off the beater or wires on the whip may wear.
(OPTIONAL) To adjust beater to
bowl clearance: Tilt the motor head
back; then turn the screw slightly
counterclockwise (left) to raise the
beater, or clockwise (right) to lower the
beater. Adjust the beater so that it just
clears the surface of the bowl. If you
over adjust the screw, the bowl lock
lever may not lock into place.
(OPTIONAL) Place the pouring shield*:
Slide the pouring shield* from the
front of the Stand Mixer over the
bowl until the pouring shield* is
centred. The bottom rim of the
pouring shield* fits inside of the
bowl. The pouring chute will be
just to the right of the attachment
hub as you face the Stand Mixer.
5
Lower the motor head: Slide the
locking lever to the unlock position
and guide the motor head down.
Make sure motor head is completely
down, then slide the locking lever
to the lock position. Before mixing,
test lock by attempting to raise the
motor head.
*Accessory sold separately
W10747072E.indb 14 1/15/2019 5:56:07 PM

ENGLISH
USING THE STAND MIXER | 15
USING THE STAND MIXER
OPERATING THE STAND MIXER
NOTE: The Stand Mixer may warm up during use. Under heavy loads with extended
mixing time, the top of the unit may become hot. This is normal.
Electrical Shock Hazard
Plug into an earthed outlet.
Do not remove earth prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these
instructions can result in
death, fire, or electrical shock.
1
Plug the Stand Mixer into an earthed
outlet. Always set the speed control
lever on lowest speed to start,
then gradually increase speed to
avoid splashing ingredients. See the
“Speed control guide” to select the
best speed for your recipe.
2
Do not scrape the bowl while the
Stand Mixer is operating. The bowl
and beaters are designed to provide
thorough mixing without frequent
scraping. Scraping the bowl once
or twice during mixing is usually
sufficient.
NOTE: To move the speed control lever
with ease, lift slightly up as you move it
across the settings in either direction.
W10747072E.indb 15 1/15/2019 5:56:07 PM

16 | USING THE STAND MIXER
USING THE STAND MIXER
DISASSEMBLING THE STAND MIXER
NOTE: The pouring shield* can be
used to avoid ingredients splashing
out of the bowl when mixing as well
as to easily pour ingredients in the
bowl while mixing.
1
Raise the motor head: Check to
be sure that the Stand Mixer is
unplugged, and the speed control is
turned to “0”; then slide the locking
lever to the unlock position and lift
the motor head. Once lifted, slide
the locking lever to the lock position
to keep the motor head up.
(OPTIONAL) Remove the pouring
shield*: Lift the front of the pouring
shield* clear of the rim of the bowl,
and pull away from the Stand Mixer.
(OPTIONAL) Pour ingredients into the
bowl through the pouring chute.
*Accessory sold separately
W10747072E.indb 16 1/15/2019 5:56:07 PM

ENGLISH
USING THE STAND MIXER | 17
USING THE STAND MIXER
OPTIONAL ATTACHMENTS
KitchenAid offers a wide range of optional attachments such as the spiralizer, pasta
cutters, or food grinders that may be attached to the Stand Mixer attachment power
shaft as shown here.
1Check to be sure that the Stand
Mixer is unplugged, and the speed
control is turned to “0”. 2Turn the attachment knob
counterclockwise to remove
attachment hub cover.
2
Remove the accessory: Turn the
speed control to “0”, unplug the
Stand Mixer, and tilt the motor head
back; then, press the accessory
upward as far as possible, then turn
the accessory clockwise and pull it
away from the beater shaft.
3Remove the bowl: Gently turn
the bowl counterclockwise to release
it from the bowl clamping plate.
W10747072E.indb 17 1/15/2019 5:56:08 PM

18 | CARE AND CLEANING
USING THE STAND MIXER
3
Insert attachment into attachment
hub, making certain that attachment
power shaft fits into the square
attachment hub socket. It may be
necessary to rotate the attachment
back and forth. When it is in the
proper position, the pin on the
attachment will fit into the notch
on the hub rim.
4
Tighten the attachment knob
by turning it clockwise until the
attachment is completely secured
to the Stand Mixer. See the
Instructions manual that came
with your attachment for detailed
directions on using the attachment.
CARE AND CLEANING
CLEANING THE STAND MIXER
IMPORTANT: Do not wash the wire whip in the dishwasher. Do not immerse the Stand
Mixer body in water or other liquids. These parts should be hand washed.
1
Turn the Stand Mixer off and unplug
before cleaning. Wipe the stand mixer
body with a soft, damp cloth. Do not
use household/commercial cleaners.
Wipe off the beater shaft frequently
to remove any accumulation of
residue. Do not immerse in water.
2
The bowl, flat beater, dough hook,
flex-edge beater, and pouring shield*
(top shelf only) may be washed in a
dishwasher; or, clean them thoroughly
in hot, sudsy water and rinse
completely before drying. Do not
store beaters on the shaft.
*Accessory sold separately
W10747072E.indb 18 1/15/2019 5:56:08 PM

ENGLISH
TROUBLESHOOTING | 19
CARE AND CLEANING
3
The wire whip is not dishwasher
safe. Clean it thoroughly in hot, sudsy
water and rinse completely before
drying. Do not store the wire whip
on the shaft.
TROUBLESHOOTING
Electrical Shock Hazard
Plug into an earthed outlet.
Do not remove earth prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these
instructions can result in
death, fire, or electrical shock.
If your Stand Mixer should malfunction
or fail to operate, please check the
following:
1. The Stand Mixer may warm up
during use. Under heavy loads
with extended mixing time periods,
you may not be able to comfortably
touch the top of the unit. This
is normal.
2. The Stand Mixer may emit a pungent
odor, especially when new. This is
common with electric motors.
3. If the flat beater hits the bowl, stop
the Stand Mixer. See the “Assembling
the Stand Mixer” section and adjust
the beater to bowl clearance.
4. Is the Stand Mixer plugged in?
5. Is the fuse in the circuit to the Stand
Mixer in working order? If you have
a circuit breaker box, be sure the
circuit is closed.
6. Turn off the Stand Mixer for
10-15 seconds, then turn it back
on. If the Stand Mixer still does not
start, allow it to cool for 30 minutes
before turning it back on.
If the problem cannot be corrected:
See the “Warranty and service” section.
Do not return the Stand Mixer to the
retailer; retailers do not provide service.
W10747072E.indb 19 1/15/2019 5:56:08 PM

20 | WARRANTY AND SERVICE
WARRANTY AND SERVICE
CUSTOMER SERVICE
KITCHENAID STAND MIXER WARRANTY
KITCHENAID DOES NOT ASSUME ANY RESPONSIBILITY FOR INDIRECT
DAMAGES.
Length of Warranty: KitchenAid Will Pay For: KitchenAid Will Not Pay For:
Europe, Middle East
and Africa:
5KSM3311
Five years full
warranty from
date of purchase.
The replacement parts
and repair labour
costs to correct
defects in materials or
workmanship. Service
must be provided by an
Authorised KitchenAid
Service Centre.
A. Repairs when Stand Mixer is
used for operations other
than normal household
food preparation.
B. Damage resulting from
accident, alterations,
misuse, abuse, or installation/
operation not in accordance
with local electrical codes.
©2019 All rights reserved. KITCHENAID and the design of the stand mixer are trademarks in
the U.S. and elsewhere.
In U.K. and Ireland:
For any questions, or to find the nearest KitchenAid Authorised Service Centre,
please find our contact details below.
NOTE: All service should be handled locally by an Authorised KitchenAid Service
Centre.
General hotline number:
In other countries:
For all product related questions and after sales matters, please contact your dealer
to obtain the name of the nearest Authorised KitchenAid Service/Customer Centre.
For more information, visit our website at:
www.KitchenAid.co.uk
www.KitchenAid.eu
W10747072E.indb 20 1/15/2019 5:56:08 PM