Kitronik MI:pro User manual

Protective Case for the MI:power board
Protective Case
is a simple & compact, it’s 4 - layer
construction is easy to assemble and
gives access to all buttons. The MI:pro
case has been designed for use with
the MI:power board (sold separatley). To
keep it extra safe, this case closes o󰊞
all the edge pins on the BBC micro:bit,
so there is no need to worry about them
getting damaged.
This is not a toy. Children assembling this product should be supervised by a
competent adult. The product contains small parts and should be kept out of reach
of children under three years of age.
Design copyright Kitronik Ltd 2016
TM
TM
Stock code: 5611
NOT INCLUDED:TOOLS REQUIRED:
- Flat head screwdriver
What is the MI:power board?
Visit www.kitronik.co.uk/5610
- BBC micro:bit
- MI:power board
Designed for
the .. board
• Protect BBC micro:bit and • Access all buttons
Protective Case
TM
TM

x4
1 2 3
x4
4
1
2
3
4
Assembly instructions Push large screws
through part no.1.
Lay 󰈜at with front
facing the surface. Stack each layer as numbered onto the screws
through layer no. 1, then tighten nuts.
INCLUDED PARTS / INSTRUCTIONS
1
2
3