Kleenmaid RHUC61 User manual

cooking collection
Instructions for use and warranty details
Rangehood
Model No: RHUC61
RHUC91

Dear Customer,
Thank you and congratulations for choosing
Kleenmaid.
Your new appliance has been designed
and meticulously tested to ensure that it
meets all your culinary requirements, and
has been carefully manufactured using top
quality materials to give you years of reliable
performance.
For best results, carefully read the instructions
on how your new appliance is to be installed.
Correct installation will avoid delays and
unnecessary service call costs.
Once installation is complete, please read this
instruction manual carefully and get to know
the controls and the features of your new
Kleenmaid appliance. These simple instructions
will enable you to achieve excellent results from
the very first time you use it.
Again, congratulations and thank you for
choosing The Best You Can Own.
KLEENMAID

Contents
Warnings.............................................................. 3
01
02
03
04
05
06
07
08
Measurement.......... .............................................. 5
Safety Warning......................................................4
Installation..............................................................7
Use........................................................................10
Maintenance.........................................................11
Contents
14
09 Main Parameters..................................................
Trouble Shooting..................................................
15
2
Contents................................................................2
10 Disposal................................................................ 15

Contents
This appliance is not intended for use by persons
(including children) with reduced physical,sensory or
mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction
concerning use of the appliance by a person responsible
for their safety. Children shall not play with the appliance.
Cleaning and user maintenance shall not be made by
children without supervision.
If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.


There should be adequate ventilation of the room when the
range hood is used at the same time as appliances burning
gas or other fuels.
The filter is made of high density aluminum. Please do
not use corrosive detergent for cleaning.
Regular maintenance is recommended for the unit to continue
to function properly.



CAUTION :
used with cooking appliances.
Warnings
3
Accessible parts may become hot when
 To protect the main body from corrosion due to the
accumulation of dirt over time the rangehood should be
cleaned with hot water and non-corrosive detergent every
two months.
There is a fire risk if cleaning is not carried out in
accordance with the instructions.
Do not flambé under the rangehood.
Exhaust air must not be discharged into an existing flue which
is used for exhausting fumes from appliances burning gas or
other fuels.
The safety gap between the rangehood and the hob below
must comply with the recommendations of the hob
manufacturer. In case of no instructions, a minimum
distance of 650mm (or other minimum distance as may be
specified by AS/NZS 5601 and interpreted by a certified
installer) should apply.
Regulations concerning the discharge of air must be fulfilled.
The appliance is designed for use with 4 hob elements at most.


4
This appliance is not intended for use by persons (including children)
with reduced physical,sensory or mental capabilities, or lack of
experience and knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a person
responsible for their safety.
Children should be supervised to ensure they do not play with the
appliance.

Do not use open flame. Overheated oil can burst into flames.
If any fault occurswith the appliance, please call the after-sale
service department.
Please keep the kitchen well ventilated.
Switch off or unplug the appliance from the mains supply before
carrying out any cleaning or maintenance.
If the supply cord is damaged, it must be replaced by the manufacturer,
service agent or similarly qualified person in order to avoid a hazard.
The replaced power cord should be provided by manufacturer or seller.
There is a fire risk if cleaning is not carried out in accordance with the
instructions.
In case of damaged connecting wire, please refer to the manufacturer,
after-sale service personnel or other qualified technicians.
Use the unit according to the instructions to avoid any fire hazard.
The exhaust air must not be introduced into a smoke flue or chimney
that is used for exhausting fumes from appliances burning gas.
Follow the local laws applicable for external air evacuation.
Plug the power cord to socket outlet with an earthing continuity
terminal.
Safety Warning


The rangehood is for home use only, not suitable for barbecue, roast
shop and other commercial purposes.
The rangehood and its filter should be cleaned regularly
according to the instructions.

5
Measurement
(A)

Measurement
6
The safety gap between the
rangehood and the hob below
must comply with the
recommendations of the hob
manufacturer. In case of no
instructions, a minimum
distance of 650mm (or other
minimum distance as may be
specified by AS/NZS 5601 and
interpreted by a certified
installer) should apply.

7
Installation
Two venting modes are available, extraction-air mode and
recirculation mode. Select desired mode before installation.
Extraction-air mode Recirculation mode

8


Press the lock catch of the
metal filter, remove the filter.
Remove the stainless steel
frame by unfastening the 4
screws (M4*10).
Unfasten the screws (ST4*10),
remove the lid of terminal box,
disconnect the wires to the
commands at the connectors.
Disconnect the wires to the light
at the connectors.


 Fasten the rangehood in the
cabinet by using the 12 screws
(ST4*18).
Installation

9


Reconnect the wires to
the commands and light.
Replace the metal filter.

Screw the stainless steel
frame back into place using
the 4 screws removed as
described above.
Installation