Kleenmaid RHUC92 Installation guide

cooking collection
Instructions for use and warranty details
T o re g ister your warranty or m a k e a
warranty clai
m, scan t h is QR code :
Fixe
d Undermount Rangehood
Model: RHUC92

Contents
Warnings............................................................... 2
01
02
03
04
05
06
07
08
Measurement.......... .............................................. 4
Safety Warning...................................................... 3
Installation..............................................................6
Use........................................................................ 9
Maintenance..........................................................
Contents
1
09Main Parameters..................................................
Trouble Shooting..................................................
1
1
Contents................................................................1
10 Disposal................................................................ 1
10
3
4
4
Before using this appliance please study this entire User Manual carefully. Keep this
manual in a safe place for future reference. Ensure that other people using the product
are familiar with these instructions as well. The latest version of this manual is
available on our website. (See back cover for details.)

zThis appliance is not intended for use by persons
(including children) with reduced physical,sensory or mental
capabilities, or lack of experience and knowledge, unless they
have been given supervision or instruction concerning use of the
appliance by a person responsible for their safety. Children shall
not play with the appliance. Cleaning and user maintenance shall
not be made by children without supervision.
zIf the supply cord is damaged, it must be replaced by the manufacturer,
its service agent or similarly qualified persons in order to avoid a hazard.
zThere should be adequate ventilation of the room when the range hood
is used at the same time as appliances burning gas or other fuels.
zThe filter is made of high density aluminum. Please do not use corrosive
detergent for cleaning.
zRegular maintenance is recommended for the unit to continue to
function properly.
zTo protect the main body from corrosion due to the accumulation of dirt
over time the range hood should be cleaned with hot water and non-
corrosive detergent every two months.
zThere is a fire risk if cleaning is not carried out in accordance with the
instructions.
zDo not flambé under the range hood.
zExhaust air must not be discharged into an existing flue which is used
for exhausting fumes from appliances burning gas or other fuels.
zThe minimum distance between the supporting surface for the cooking
vessels on the hob and the lowest part of the range hood. This distance
shall be at least 65 cm. If the instructions for installation specify a
smaller distance, this has to be taken into account. The distance of 65
cm can be reduced for: non-combustible parts of range hoods, except
grease filters, and parts operating at safety extra low voltage, provided
these parts do not give access to live parts if deformed.
zRegulations concerning the discharge of air must be fulfilled.
zThe appliance is designed for use with 4 hob elements at most.
zCAUTION : Accessible parts may become hot when used with cooking
appliances.
2
Warnings

3
zThis appliance is not intended for use by persons (including children)
with reduced physical,sensory or mental capabilities, or lack of
experience and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person responsible for
their safety.
zChildren should be supervised to ensure they do not play with the
appliance.
zThe range hood is for home use only, not suitable for barbecue, roast
shop and other commercial purposes.
zThe range hood and its filter should be cleaned regularly according to the
instructions.
zDo not use open flame. Overheated oil can burst into flames.
zIf any fault occurs with the appliance, please call the after-sale service
department.
zPlease keep the kitchen well ventilated.
zSwitch off or unplug the appliance from the mains supply before carrying
out any cleaning or maintenance.
zIf the supply cord is damaged, it must be replaced by the manufacturer,
service agent or similarly qualified person in order to avoid a hazard. The
replaced power cord should be provided by manufacturer or seller.
zThere is a fire risk if cleaning is not carried out in accordance with the
instructions.
zIn case of damaged connecting wire, please refer to the manufacturer,
after-sale service personnel or other qualified technicians.
zUse the unit according to the instructions to avoid any fire hazard.
zThe exhaust air must not be introduced into a smoke flue or chimney that
is used for exhausting fumes from appliances burning gas.
zFollow the local laws applicable for external air evacuation.
zPlug the power cord to socket outlet with an earthing continuity terminal.
zRange hoods and other cooking fume extractors may adversely affect the
safe operation of appliances burning gas or other fuels (including those in
other rooms) due to back flow of combustion gases. These gases can
potentially result in carbon monoxide poisoning. After installation of a
range hood or other cooking fume extractor, the operation of flued gas
appliances should be tested by a competent person to ensure that back
flow of combustion gases does not occur.
Safety Warning

4
Measurement
259
A20
L1 L1
Φ150
256
248
284
(A)
900
865
860
900
Note: measurements
are in mm.

Measurement
5
Electric Cooktop Gas Cooktop
The safety gap between the
rangehood and the hob below
must comply with the
recommendations of the hob
manufacturer. In case
of no instructions, a minimum
distance of 650mm (or other
minimum distance as may be
specified by AS/NZS 5601
and interpreted by a certified
installer) should apply.

6
Installation
Ducted mode Recirculation mode
NOTE: Before making preparations for or commencing installation, the
installer should refer to the current online version of the User Manual,
which is available on the Kleenmaid website (see back cover for details).
Two venting modes are available, ducted mode and recirculation
mode. Select desired mode before installation.
NOTE: There are accessories supplied with the appliance which
should be retained for installation and not discarded with packaging
eg screws.

7
z
zPress the lock catch of metal
filter, remove the filter.
Remove the stainless steel
frame by unfastening the 4
screws (M4*10)
z
z
zFasten the hood in the cabinet
by using the 12 screws (ST4*18).
Installation
and the other
2 screws (M4*8).
Unfastening the screws (ST4*10),
remove the lid of terminal box,
disconnect the wires to the
commands at the connectors.
Disconnect the wires to the
light at the connectors.

8
z
z
z
Reconnect the wires to the
commands and light.
Replace the metal filter.
Install the air outlet ducting (optional).
z
Screw the stainless steel
frame back into place using
the screws removed as
described above.
Installation
NOTE: When installing in the ducted
mode, connect the rangehood using rigid
smooth surface ducting of 150mm
diameter (not supplied). The maximum
recommended overall ducting path to the
outside of the building (for 150mm
diameter smooth-walled, rigid pipe only)
is 10m, reduced by 2.5m for each 90’
bend in the ducting path.

9
Use
Speed adjustment. See the figure below.
Rotate the knob to the Stop graphic, the motor will stop running.
Rotate the knob to the Light graphic, the two lighting lamps will
come on.
Rotate the knob to the Low (speed) graphic, the motor runs at
low speed, two lights on.
Rotate the knob to the Mid (speed) graphic, the motor runs
at mid speed, two lights on.
Rotate the knob to the High (speed) graphic, the motor
runs at high speed, two lights on.
z
z
z
z
z
High Mid Low
Light Stop
Knob GraphicsKnob