Klimawent SMART-N Series User manual

1
31.05.2019 RADIAL ROOF FANS SMART-N
Use and Maintenance Manual
Radial roof fans
SMART-N
Contents:
1. Introductory Remarks...............................................................................................2
2. Application.................................................................................................................2
3. Reservations of Producer.........................................................................................2
4. Technical Data...........................................................................................................3
5. Structure and Function...........................................................................................10
6. Assembly and Start-up...........................................................................................12
7. Operational Use.......................................................................................................15
8. Trouble Shooting Guide .........................................................................................16
9. Maintenance ............................................................................................................16
10. Occupational Health and Safety ............................................................................17
11. Transport and Storage............................................................................................17
12. Terms of warranty...................................................................................................17
13. Sample of the Declaration of Conformity..............................................................18
812W60
SMART-160/3000-N
31.05.2019/EN
812W70
SMART-400/750-N
31.05.2019/EN
812W61
SMART-200/1000-N
31.05.2019/EN
812W71
SMART-400/1000-N
31.05.2019/EN
812W62
SMART-200/1500-N
31.05.2019/EN
812W72
SMART-400/1500-N
31.05.2019/EN
812W63
SMART-200/3000-N
31.05.2019/EN
812W73
SMART-500/750-N
31.05.2019/EN
812W64
SMART-250/1000-N
31.05.2019/EN
812W74
SMART-500/1000-N
31.05.2019/EN
812W65
SMART-250/1500-N
31.05.2019/EN
812W75
SMART-630/750-N
31.05.2019/EN
812W66
SMART-250/3000-N
31.05.2019/EN
812W76
SMART-630/1000-N
31.05.2019/EN
812W67
SMART-315/1000-N
31.05.2019/EN
812W77
SMART-710/750-N
31.05.2019/EN
812W68
SMART-315/1500-N
31.05.2019/EN
812W78
SMART-710/1000-N
31.05.2019/EN
812W69
SMART-315/3000-N
31.05.2019/EN

2
RADIAL ROOF FANS SMART-N 31.05.2019
1. Introductory Remarks
The purpose of the present Use and Maintenance Manual is to supply User with directions wi-
thin the range of application, installation, start-up and the operational use of the SMART-N radial
roof fans.
Installing, start up and operational use are exclusively admissible after getting acquaint-
ted with the contents of the Use and Maintenance Manual.
With regard to continuity of work carried on improvement of our products, we reserve for oursel-
ves the revision possibility of the draft and technological changes improving
their functional features and safety.
The construction of the SMART-N radial roof fans meets the requirements of the current state
of technology as well as the safety and health assurances included in:

2006/42/EC Machinery Directive of the European Parliament and of the Council of May 17th,
2006 on machinery –amending the 95/16/EC (recast) /Journal of Laws EC L157 of 09.06.2006, page 24/

2014/35/EC Directive of the European Parliament and of the Council of February 26th, 2014
on the harmonisation of the laws of the Member States relating to the making available on the
market of electrical equipment designed for use within certain voltage limits. /Journal of Laws EC
L96 of 29.03.2014/
The appliance meets the requirements included in:

2009/125/EC (ErP) Directive of the European Parliament and of the Council of October 21th,
2009 establishing a framework for the setting of ecodesign requirements for energy-related pro-
ducts / Journal of Laws L 285 of 31.10.2009 /

327/2011 (EU) Regulation of March 30th, 2011 on implementing the 2009/125/EC Directive
of the European Parliament and of the Council with regard to ecodesign requirements for fans
driven by motors with an electric input power between 125W and 500 kW / Journal of Laws L
No. 90 of 06.04.2011 /
The device has been constructed and produced on the basis of following harmonized standards:
●
EN ISO-12100:2012
–
“Safety of machinery. Basic concepts, general principles
for design. Risk assessment and risk reduction”
●
EN 60204-1:2018-12
–
“Safety of machinery – Electrical equipment of machines.
Part 1: General requirements”
●
EN 60034-1:2011
–
“Rotating electrical machines –Part 1: Rating data and
parameters”
●
EN ISO 5802:2008/A1:2015-07
–
“Industrial Fans – Performance testing in situ of installing
●
EN ISO 13857:2010
–
“Safety of machinery –Safe distances to prevent hazard
zones being reached by upper and lower limbs”.
2. Application
SMART-N radial roof fans are meant for general ventilation of rooms, in common- and indus-
trial buildings. Moreover, they can also be applied in the technological ventilation installations
(local exhausts). Due to their disposable pressure, they can be connected to a system of ven-
tilation ducts.
The fans are meant for forwarding the dry air of dustiness not exceeding 0,3 g/m³ and
of maximum temperature 60C, without viscous impurities, aggressive compounds or
substances creating explosion hazard.
3. Reservations of Producer
A.
Manufacturer accepts no liability for any consequences following from the operational use
that is in contradiction to the purpose of application.
B.
It is unacceptable to install on the device structure any additional elements not belonging to
its normal construction or accessory set.
C.
Do not introduce any structural changes or modification of the appliance on one’s own.

3
31.05.2019 RADIAL ROOF FANS SMART-N
D.
Protect the housing from mechanical damage.
E.
Prior to installing, check the load capacity of the constructional elements where the fan will
be mounted. Unsure installing could cause hazard to personnel / people in vicinity and effect
in damage of the device.
F.
SMART-N fans cannot be used for conveying the air contaminated with a mixture of
flammable substances in form of gas, vapour, mist and dust, that in connection with
the air could create the explosive atmosphere.
G.
Do not use the fans for conveying the air containing viscous impurities that could ac-
cumulate on the device surface, especially on the impeller.
H.
Neither use them for forwarding the air with aggressive pollutants which will destruc-
tively effect the device structure.
I.
During operation, the maximum impeller rotations should not exceed the nominal rotations.
J.
Producer is not responsible for wounds, injuries, body laceration experienced by User or per-
sonnel during the improper operational use.
4. Technical Data
Table No.1
Type of the fan
Synchronous
rotations
Supply
voltage
Motor
rate
Maximum
volume flow
Maximum
fan pressure
Weight
[r.p.m.]
[V / Hz]
[kW]
[m³/h]
[Pa]
[kg]
SMART-160/3000-N
3000
3 x 400 / 50
0,55
2300
820
20
SMART-200/3000-N
3000
3 x 400 / 50
0,55
2800
820
20
SMART-200/1500-N
1500
0,55
2800
710
40
SMART-200/1000-N
1000
0,37
2100
345
40
SMART-250/3000-N
3000
3 x 400 / 50
0,55
2900
520
20
SMART-250/1500-N
1500
1,1
4600
790
44
SMART-250/1000-N
1000
0,37
3160
370
42
SMART-315/3000-N
3000
3 x 400 / 50
0,55
3400
520
20
SMART-315/1500-N
1500
3 x 400 / 50
1,5
7800
890
60
SMART-315/1000-N
1000
3 x 400 / 50
0,55
5000
390
55
SMART-400/1500-N
1500
3 x 400 / 50
3,0
11100
1000
70
SMART-400/1000-N
1000
3 x 400 / 50
0,75
7000
400
59
SMART-400/750-N
750
3 x 400 / 50
0,37
5200
240
58
SMART-500/1000-N
1000
3 x 400 / 50
2,2
14900
530
94
SMART-500/750-N
750
1,1
10700
290
87
SMART-630/1000-N
1000
3 x 400 / 50
4,0
22500
670
163
SMART-630/750-N
750
2,2
18100
390
151
SMART-710/1000-N
1000
3 x 400 / 50
5,5
31000
740
174
SMART-710/750-N
750
2,2
20500
390
155
Caution:
1.
Ingress protection IP54
2.
In order to reduce the noise level, it is recommended to apply sound absorbing
roof bases –type TPD-N and TPDC-N

4
RADIAL ROOF FANS SMART-N 31.05.2019
Flow charts
Table No.2
SMART-160/3000-N
Acoustic pressure level [dB(A)]
outlet
inlet
1 [m]
5 [m]
10 [m]
15 [m]
1 [m]
79
69
62
59
71
Table No.3
SMART-200/1000-N
Acoustic pressure level [dB(A)]
outlet
inlet
1 [m]
5 [m]
10 [m]
15 [m]
1 [m]
67
56
50
46
51

5
31.05.2019 RADIAL ROOF FANS SMART-N
SMART-200/1500-N
Acoustic pressure level [dB(A)]
outlet
inlet
1 [m]
5 [m]
10 [m]
15 [m]
1 [m]
74
64
57
54
60
SMART-200/3000-N
Acoustic pressure level [dB(A)]
outlet
inlet
1 [m]
5 [m]
10 [m]
15 [m]
1 [m]
79
69
62
59
71
Table No.4
SMART-250/1000-N
Acoustic pressure level [dB(A)]
outlet
inlet
1 [m]
5 [m]
10 [m]
15 [m]
1 [m]
65
56
48
44
53
SMART-250/1500-N
Acoustic pressure level [dB(A)]
outlet
inlet
1 [m]
5 [m]
10 [m]
15 [m]
1 [m]
75
66
58
55
65
SMART-250/3000-N
Acoustic pressure level [dB(A)]
outlet
inlet
1 [m]
5 [m]
10 [m]
15 [m]
1 [m]
80
70
63
60
74

6
RADIAL ROOF FANS SMART-N 31.05.2019
Table No.5
SMART-315/1000-N
Acoustic pressure level [dB(A)]
outlet
inlet
1 [m]
5 [m]
10 [m]
15 [m]
1 [m]
68
59
51
48
59
SMART-315/1500-N
Acoustic pressure level [dB(A)]
outlet
inlet
1 [m]
5 [m]
10 [m]
15 [m]
1 [m]
80
70
63
60
70
SMART-315/3000-N
Acoustic pressure level [dB(A)]
outlet
inlet
1 [m]
5 [m]
10 [m]
15 [m]
1 [m]
80
70
63
60
74

7
31.05.2019 RADIAL ROOF FANS SMART-N
Table No.6
SMART-400/750-N
Acoustic pressure level [dB(A)]
outlet
inlet
1 [m]
5 [m]
10 [m]
15 [m]
1 [m]
63
55
46
43
53
SMART-400/1000-N
Acoustic pressure level [dB(A)]
outlet
inlet
1 [m]
5 [m]
10 [m]
15 [m]
1 [m]
73
62
56
52
62
SMART-400/1500-N
Acoustic pressure level [dB(A)]
outlet
inlet
1 [m]
5 [m]
10 [m]
15 [m]
1 [m]
85
75
68
64
72

8
RADIAL ROOF FANS SMART-N 31.05.2019
Table No.7
SMART-500/750-N
Acoustic pressure level [dB(A)]
outlet
inlet
1 [m]
5 [m]
10 [m]
15 [m]
1 [m]
69
59
52
49
61
SMART-500/1000-N
Acoustic pressure level [dB(A)]
outlet
inlet
1 [m]
5 [m]
10 [m]
15 [m]
1 [m]
78
68
61
58
69

9
31.05.2019 RADIAL ROOF FANS SMART-N
Table No.8
SMART-630/750-N
Acoustic pressure level [dB(A)]
outlet
inlet
1 [m]
5 [m]
10 [m]
15 [m]
1 [m]
77
67
60
56
70
SMART-630/1000-N
Acoustic pressure level [dB(A)]
outlet
inlet
1 [m]
5 [m]
10 [m]
15 [m]
1 [m]
84
74
67
64
77

10
RADIAL ROOF FANS SMART-N 31.05.2019
Table No.9
SMART-710/750-N
Acoustic pressure level [dB(A)]
outlet
inlet
1 [m]
5 [m]
10 [m]
15 [m]
1 [m]
81
71
64
61
71
SMART-710/1000-N
Acoustic pressure level [dB(A)]
outlet
inlet
1 [m]
5 [m]
10 [m]
15 [m]
1 [m]
87
77
70
66
78
5. Structure and Function
SMART-N radial roof fans are of original construction of bent steel profiles, making up a ske-
leton of streamline and robust properties.
Inside is located a motor with a radial impeller. Impeller is statically and dynamically balanced
according to ISO 14694:2003+AMD1:2010 gaining the G 2,5 class.
Lower skeletons (of the 3000 r.p.m synchronous rotation fans) are surrounded with a circumfe-
rential wire net, providing an openwork structure, through which the air is discharged (see Fig.
No.2). In case of the other fan types, their lower skeleton is of steel rods (see Fig. No.1). Upper
parts of the fan are shielded by a plastic hood.
The fan has to be mounted on a roof base. It is recommended to apply a sound absorbing roof
base TPD-N or TPDC-N of suitable size, adapted to the given fan.

11
31.05.2019 RADIAL ROOF FANS SMART-N
On separate order, are delivered isolating switches, that are required to disconnect the po-
wer supply during installing and servicing.
In the Fig. No.1 are displayed dimensions of the SMART-N fans in subsequent sizes (except
for fans of 3000 r.p.m.).
Fig. No.1 –Fans of SMART-N types –structure and dimensions
Table No.10 –
Dimensions of the fans type SMART-N (except for fans of rotational
speed 3000 r.p.m.)
Type of the fan
A
B
ØC
ØD
ØE
Quantity of holes Ø10
SMART-200-N
SMART-250-N
SMART-315-N
SMART-400-N
SMART-500-N
SMART-630-N
SMART-710-N
720
720
800
815
955
1135
1135
180
180
200
210
230
250
250
785
785
885
885
1075
1325
1325
200
250
315
400
500
630
710
224
274
344
430
530
660
740
8
8
8
8
8
12
12

12
RADIAL ROOF FANS SMART-N 31.05.2019
In the Fig. No.2 are displayed dimensions and structure of the fans SMART-N of rotational
speed 3000 r.p.m.
Fig. No.2 –SMART-N fans of 3000 r.p.m. –structure and dimensions
Table No.11 –Dimensions of the fans type SMART-N of rotational speed 3000 r.p.m.
Type of the fan
A
B
ØC
ØD
ØE
Quantity of holes Ø10
SMART-160/3000-N
590
220
540
160
194
6
SMART-200/3000-N
590
220
540
200
224
8
SMART-250/3000-N
590
220
540
250
274
8
SMART-315/3000-N
590
220
540
315
344
8
6. Assembly and Start-up
To mount the fan on a roof (of the industrial building) it is important to install it on a pedestal with
a suitable roof base.
It is recommended to apply the TPD-N or TPDC-N sound absorbing roof bases (delivery on
separate order below, in Fig. No.4 and No.5 are given their dimensions).
The application roof bases itself, reduces the noise coming into the process room by 12 up to 18
dB(A).
In order to reduce more the noise level, install a silencer beneath the roof base, suspending inside
the room.
Before lifting and installing the fan (onto the roof base)it is important to use special lifting
eye bolts, screwed up to the disk underneath the motor –before doing this, take off the fan
hood. Do not use the motor eye-bolt handle for transporting the whole fan!

13
31.05.2019 RADIAL ROOF FANS SMART-N
Having placed the fan on the roof base, screw up precisely all the bolts between the fan connec-
tion flange and the roof base (see Fig. No.3) and finally install the hood.
As the impeller is uncovered and unprotected, handle with care while the fan
is lifted (transported vertically)and positioned at the place of operation.
Connection flange
Fig. No.3 –Connection flange of the fan –dimensions
Table No.12 –Dimensions of the connection flanges
Type of the fan
Connection flange
ØA [mm]
ØB [mm]
ØC [mm]
quantity of holes Ø10
SMART-160-N
160
194
218
6
SMART-200-N
200
224
250
8
SMART-250-N
250
274
300
8
SMART-315-N
315
344
365
8
SMART-400-N
400
430
450
8
SMART-500-N
500
530
550
8
SMART-630-N
630
660
680
12
SMART-710-N
710
740
760
12
Sound absorbing roof base
TPD-xxx-N
Fig No.4 –Roof bases type TPD-N –dimensions

14
RADIAL ROOF FANS SMART-N 31.05.2019
Table No.13 –Dimensions of sound absorbing roof bases TPD-N
Type of the fan
Sound absorbing roof base
Type
D[mm]
A[mm]
H[mm]
SMART-160-N
TPD-160-N
160
430
625
SMART-200-N
TPD-200-N
200
430
625
SMART-250-N
TPD-250-N
250
530
950
SMART-315-N
TPD-315-N
315
530
950
SMART-400-N
TPD-400-N
400
790
1200
SMART-500-N
TPD-500-N
500
790
1200
SMART-630-N
TPD-630-N
630
890
1200
SMART-710-N
TPD-710-N
710
890
1200
Sound absorbing roof base
TPDC-xxx-N
Fig. No.5 –Roof bases type TPDC-N –dimensions
Table No.14 –Dimensions of sound absorbing roof bases TPDC-N
Type of the fan
Sound absorbing roof base
Type
D[mm]
A[mm]
B [mm]
H[mm]
SMART-160-N
TPDC-160-N
160
430
630
625
SMART-200-N
TPDC-200-N
200
430
630
625
SMART-250-N
TPDC-250-N
250
530
730
950
SMART-315-N
TPDC-315-N
315
530
730
950
SMART-400-N
TPDC-400-N
400
790
990
1200
SMART-500-N
TPDC-500-N
500
790
990
1200
SMART-630-N
TPDC-630-N
630
890
1090
1200
SMART-710-N
TPDC-710-N
710
890
1090
1200
The roof fan has to be connected to the power supply line by User on one’s own. According to
the regulations, any activities related with connection to the power supply system ought
to be carried out exclusively by a person with qualifications.
It is important to install the isolating switch (IS), to cut off the power supply for the time of servi-
cing / maintenance. Isolating switch is an additional accessory –KLIMAWENT S.A. delivers it
on separate order. User installs the switch on one’s own in a convenient place.
The way of connection is shown in the Fig. No.6.

15
31.05.2019 RADIAL ROOF FANS SMART-N
Before this, remove the fan hood to get free access to the connection box of the fan motor.
Having completed all the connections, reinstall the fan hood.
Additionally, it is important to select the suitable sort and section of the supply cable and pro-
tection from short-circuit- and overload effects, according to the local conditions.
Before the start-up of the fan check following aspects:
–
nominal voltage of the supply system and of the motor,
–
correct and durable connections of the PE protective cable,
–
installing of correct protection within the supply circuit system.
Before the first start-up, check the correctness of the impeller rotation sense referring
the arrow on the fan housing –if it is incorrect, change the phase connection sequence.
Do not start the fan (even for a check) before the hood is reinstalled.
CAUTION:
1. Insulation class I
2. Ingress protection IP54
3. Setting of the motor protective switch Q1:
It = 1,1 x In
where In means rated current o the motor.
The motor windings ought to be connected according to
the connection diagram on the cover of the terminal box.
*S1 –isolating switch
The suggested installing place –near the fan.
Fig. No.6 –Connection diagram of the fans and of the isolating switches
7. Operational Use
The construction and a solid execution of the fan guarantees its operational use without con-
stant routine maintenance.
As inappropriate use is considered application of the fan that is in contradiction with
its purpose (see Section 2 of the present Use and Maintenance Manual)and when the
reservations of manufacturer are not observed (see Section 3 of the Use and Mainte-
nance Manual).
Consequences of improper use:
●
breakage of bearings,
●
balance loss of the rotary elements,
●
vibrations,
●
deformations,
●
damages caused by friction.

16
RADIAL ROOF FANS SMART-N 31.05.2019
In case when any defective device function is noticed (increased noise level, vibrations, redu-
ced flow efficiency), disconnect the fan from the power supply, and to undertake its technical
revision in order to spot the reason of the functional disturbance.
Most typical disturbances and their reasons are exposed in the Section 8.
8. Trouble Shooting Guide
Table No.15
Problem
Possible reason
Corrective action
1.
The fan cannot be
Fade out of one of the phases
Supply correct voltage,
switched on
is observed or
check the protection.
voltage is too low or the impeller
Remove the object
is blocked.
blocking he impeller.
2.
Sudden vibrations of the
Obstacle objects reducing the
Disconnect the fan from the
fan are occurring
air flow got stack in the fan
power supply system,
take off the hood and
remove the obstacle
The impeller is faulty
Replace the impeller for new
3.
The fan is working too noisy
Improper impeller rotation sense
Change the impeller rotation
or its flow efficiency is too
sense by swapping phase
weak
connection sequence
9. Maintenance
Construction provides operational longevity, robustness, reliable function, under the condition
of appropriate operational use and correctly executed maintenance.
To obtain correct functional performances and to meet the safety rules, it is recommended to sub-
mit the fan to technical revisions in regular periods of time (i.e. once a year). During the check
take into account the function of the fan as well as its technical state.
All the activities connected with technical revisions on the fan have to be
carried out by an authorised person with adequate qualifications and necessarily after dis-
connection from the power supply system.
To disconnect the fan from the power supply system, use an isolating switch (IS), which
should be ordered and installed by User. Isolating switch ought to be installed within reach
of the servicer.
IS isolating switches are offered by KLIMAWENT S.A. as additional accessory. The way of con-
nection is shown in the operation manual of the insolating switch (IS).
There are subsequent activities within the range of technical revision:
●
examine and tighten up the mechanical- and electrical connections,
●
check the mounting of the motor and fan, mind the clearance between the bent profiles and
the impeller is equalised in the whole circumference,
●
remove the impurities (eventually) deposited inside the fan.
Prior to the re-start of the fan carry out the revision steps listed in the Section 6 “Assembly
and Start-up” of the present Use and Maintenance Manual.
Exemption from this are tests that need to be carried out on the device being in run, along
with the strictly followed safety regulation –as an example –measuring of vibrations.
In the course of the revision activitiesit is important to follow the safety regulations –otherwise
the personnel / User can be at risk. Construction of the fan guarantees its operational use when it
is submit to proper maintenance.

17
31.05.2019 RADIAL ROOF FANS SMART-N
10. Occupational Health and Safety
Start up and the operational use is only admissible exclusively after getting acquainted
with the contents of the present Use and Maintenance Manual. The fan will not cause any
hazard to User / personnel, if it is stably installed on the roof base or another supporting struc-
ture of appropriate load carrying capacity.
Connect the fan to the power supply system, strictly according to the enclosed Connection Dia-
gram and the guidelines shown in Section 6 of the present Use and Maintenance Manual.
Connection to the power supply system ought to be carried ou by an
authorised person with qualifications, according to the valid regulations within the ran-
ge of Occupational Health and Safety.
In the course of operational use, examine the connection of the PE protective cable. Any revi-
sion activity and repair can be executed after the device is disconnected from the power supply.
11. Transport and Storage
The fans have to be transported on pallets and protected with foil. During loading/reloading and
transport the device must not be neither thrown nor knocked down. Do not put any additional load
on the device. It is inadmissible to put one device on top of another (no stacking).
During the transport protect them from atmospheric factors and from mechanical damage.
The fan should be stored in dry rooms and in areas of efficient ventilation.
The vertical transport to the site of use (roof of the building) has to be carried out after the hood
is taken off. For lifting and horizontal transport, connect the carrying lines to the transport eyes.
As the impeller is uncovered (without the hood), lifting and vertical transport have to be
carried out especially with precautions.
12. Terms of warranty
The period of warranty for the purchased device is indicated in the “Card of Warranty”. The war-
ranty does not comprise:
●
mechanical damage and dysfunctions caused by User,
●
device failures caused during use which was in contradiction with the purpose of operational
use and the present Use and Maintenance Manual,
●
any damages being caused during the improper transport, storage or incorrect maintenance.
Infringement of the Section 3 “Reservations of producer” of the User’s Manual and espe-
cially modifications undertaken by User on one’s own or operational use that is in contra-
diction with its purpose shall cause the loss of warranty validity.

18
RADIAL ROOF FANS SMART-N 31.05.2019
13. Sample of the Declaration of Conformity
Declaration of conformity EC No. ……………..
Manufacturer (eventually the authorized representative / importer):
name: KLIMAWENT S.A.
address: 81-571 Gdynia, Chwaszczyńska 194
A person, authorized for issuing the technical documentation: Teodor Świrbutowicz, KLIMAWENT S.A.
hereby declares that the appliance:
name: Radial roof fan
type/model: SMART-N
serial number: …………………………….. year of production: ………………………..
meets the requirements of the subsequent European Directives:

2006/42/EC Machinery Directive of the European Parliament and of the Council of 17 May, 2006 on machinery
–amending the 95/16/EC (recast) /Journal of Laws EC L157 of 09.06.2006, page 24/

2014/35/EC Directive of the European Parliament and of the Council of 26 February, 2014 on the harmonisation
of the laws of the Member States relating to the making available on the market of electrical equipment designed
for use within certain voltage limits. /Journal of Laws EC L96 of 29.03.2014/
The appliance meets the requirements included in:

2009/125/EC (ErP) Directive of the European Parliament and of the Council of October 21th, 2009 establishing a
framework for the setting of ecodesign requirements for energy-related products /Journal of Laws L 285 of 31.10.2009/

327/2011 (EU) Guideline of March 30th, 2011 on implementing the 2009/125/EC Directive of the European Parlia-
ment and of the Council with regard to ecodesign requirements for fans driven by motors with an electric input po-
-wer between 125W and 500 kW /Journal of Laws L No. 90 of 06.04.2011/
The device has been constructed and produced on the basis of following harmonized standards:
●
EN ISO-12100:2012
–
“Safety of machinery. Basic concepts, general principles
for design. Risk assessment and risk reduction”
●
EN 60204-1:2018-12
–
“Safety of machinery – Electrical equipment of machines.
Part 1: General requirements”
●
EN 60034-1:2011
–
“Rotating electrical machines –Part 1: Rating data and
parameters”
●
EN ISO 5802:2008/A1:2015-07
–
“Industrial Fans – Performance testing in situ of installing
●
EN ISO 13857:2010
–
“Safety of machinery –Safe distances to prevent hazard
zones being reached by upper and lower limbs”.
……………………………
……………………………
……………………………
place, date
signature of authorised person
name, surname, function
of the signatory
KLIMAWENT S.A.
District Court Gdańsk-Północ
NIP: 958 159 21 35
Supported Employment Enterprise
in Gdańsk, VII Wydział Gospodarczy
REGON: 220631262
81-571 Gdynia, ul. Chwaszczyńska 194
of the National Register of Court
Bank Account: Santander Bank Polska S.A.
phone: [phone]
KRS 0000308902 company stock
56 1500 1025 1210 2007 8845 0000
email: [e-mail]
13.779.200 zł paid in total
www.klimawent.com.pl

19
31.05.2019 RADIAL ROOF FANS SMART-N
NOTES:

20
RADIAL ROOF FANS SMART-N 31.05.2019
NOTES: