KNEX Imagine Build Play DRAGON'S DROP COASTER... User manual

2
IMPORTANT STUFF
FOR PARENTS & KIDS
Keep these instructions in a handy location.
They contain important safety information.
Read all warnings and instructions before you
start to build and operate the model.
WARNING: CHOKING HAZARD -
Small parts. Not for Children under 3 years.
BATTERY
INFORMATION
CONTENTS
DRAGON’S DROP COASTER . . . 4
Track Building Tips . . . . . . . . . . . . . . . . . . . . . . . . 29
Attaching Coaster Cars and Graphic Panels . . . . . . 48
Tips & Troubleshooting . . . . . . . . . . . . . . . . . . . . . 49
RACING THRILL WHEEL . . . . . 50
CAUTION: Keep hands, face, hair
and clothing away from all moving
parts.
CAUTION: Be careful not to tip the
model over. Model should be placed
on a flat and hard surface.
•Share the K'NEX experience with
your child and make building with
K'NEX a family fun adventure.
•Take your time to enjoy the building
process. Don't rush!
•While you’re building make sure you
face your model in the same
direction as the pictures show in
the instructions.
•Be sure to install batteries into
the motor before you start building
the motorized models.
•Product and colors may vary.
Caution: To Avoid Battery
Leakage
•Be sure to insert the batteries
correctly and always follow the toy
and battery manufacturers’
instructions.
•Do not mix old and new batteries
or alkaline, standard (carbon-zinc) or
rechargeable (nickel-cadmium)
batteries. Only batteries of the same
or equivalent type recommended
should be used.
•Always remove weak or dead
batteries from the product; do not
short-circuit supply terminals.
•Insert batteries with correct polarity
(+/-) as shown.
Important Tips
•Alkaline batteries AA (LR6) are
recommended.
•Rechargeable batteries are not
recommended.
•Remove rechargeable batteries from
toy before charging; they must be
charged only under adult
supervision.
•Non-rechargeable batteries must not
be recharged.
•Keep components free of dust; do not
immerse or use in water.
•Do not dispose of batteries in a fire;
they could leak or explode and cause
injury.
•Remove all batteries if the toy will not
be used for a long period of time.
•Do not put Rods smaller than
2inches in any openings of the
motor; they will damage the motor,
and cannot be removed.
How to Insert and
Remove Batteries
•Use a small Phillips head screw-
driver to loosen the screw. Insert 2
fresh AA batteries (LR6) into the
compartment with the correct
polarity (+/-) as shown here.
+
-

Start Building
Tobegin your model, find the and follow
the numbers. Each piece has its own shape
and color. Just look at the pictures, find the
pieces in your set that match and then connect
them together. Try to face your model in the
same direction as the instructions while you
build. Faded colors show you this section is
already built. You’ll want to connect the new
section to the place where the arrows are
pointing.
1 3
-
2
3
1
1
Connectors
There are blue and gray Connectors with special long
slots. They slide together as you see in the pictures.
Push these parts together until you hear a “click.”
Spacers
There are places in your model where you need to
add blue and silver Spacers. Be sure to use the
right color and count them carefully.
BUILDING BASICS
Parts Count
Before you start building, be sure to compare the
parts in your set with the parts listed here.
If anything is missing, call or write to us using the
information on the back cover. We’re here to help!
3
4
Chain
Be sure to attach all the Chain Links in the
same direction.
for Instruction UpdatesGo to

4
1 2
-
2
1
1
2
™

5
4
3
1 6
-
1 2
-
56

6
8
711
-
7 8
-
7
1
9
11
10

7
1 12
-
711
-
1 6
-
12

813 14
-
13
14

9
13 14
-
13 19
-
1
6
1
6
3
3
15
16
18
17
19

10
13 19
-
13 21
-
21
20