Knight Polo User manual

knightgroup.co.nz
Assembly Instructions
Tools Required: Powered Screwdriver & Allen Key
Polo Meeting Table

Page 1
Assembly Instructions
knightgroup.co.nz
Polo Meeting Table
Recommended
2-person Step
Thank you for purchasing Knight product, please carefully read the assembly manual and direction for use prior to installment, use
and maintenance of the product to gain a complete understanding of its contents. It provides you with important information
about the safety, use, installation and maintenance of the product.
WARNING: FAILURE TO COMPLY WITH OR OBSERVE ALL ASSEMBLY, SAFETY AND OPERATION INSTRUCTIONS REGARDING
THE USE OF THIS PRODUCT MAY RESULT IN SERIOUS BODILY INJURY.
SAFETY
• The product must be used in a safe manner. Inappropriate use may cause damage to the product and/or cause bodily harm to
the user or persons nearby.
• Don’t locate furniture in direct sunlight or near air-conditioning inlet or heating radiator.
• Don’t put high-temperature or frozen objects on furniture.
• Safely carry product to location of assembly.
• Retain this operation manual & pass it on to any future owner.
SET UP AND INSTALLATION
• Assemble the product according to the assembly instructions.
• To prevent possible scratches or damage, assemble the product on a soft surface such as a blanket, carpet or packaging.
• Place the product in a safe distance from window frames, radiators, furniture etc. so that persons cannot become trapped.
It is recommended that this product is assembled by 2 people.
Any questions contact Knight on 0800 143 143
Due to continuous improvement of our products, our assembly instructions may not be in complete accordance with the product
and we apologise in advance.
Important

Page 2
Assembly Instructions
knightgroup.co.nz
Step 1
Step 3
Step 2
Page 2
Assembly Instructions
Step 4
Place top on a flat surface with the underneath
facing upwards. Use a tape measure to centre the
base in the middle of the top and the supplied
wood screws to fix base to the top.
Turn Polo table over to upright position (2 person),
lift and carry table to required location.
Connect the column and the base with the supplied
M8x30 countersunk screws.
Connect the column and top bracket with the
supplied M8x30 hexagonal screws.
Polo Meeting Table